Simulated Microgravity Accelerates Alloy Corrosion by Aspergillus sp. via the Enhanced Production of Organic Acids.

Metal corrosion caused by Aspergillus sp. was shown to be significantly enhanced on a space station, but its mechanism is still unknown. To simulate this on earth, the corrosion capability of A. carbonarius on five metal sheets was investigated under simulated microgravity. Also, the effect of metal ions on growth and organic acid production was determined. Results showed that A. carbonarius could corrode all five types of metal, including Ti alloy, aluminum alloy, iron, and aluminum and copper sheet, and the corrosion was intensified under simulated microgravity. Energy dispersive X-ray spectrometry (EDS) analysis showed that metal ions enriched on A. carbonarius spores, especially iron, aluminum ions, and copper ions, indicating that A. carbonarius can use these metal ions. In particular, the content of oxalic acid was significantly increased after A. carbonarius cocultured with five metal materials under simulated microgravity. Al3+, Fe3+, and Cu2+ at the concentration of 0.3 mg/mL and Mg2+ at 0.8 mg/mL significantly promoted the growth and oxalic acid and citric acid production of A. carbonarius and A. niger under normal gravity and simulated microgravity. Comparing the impact of metal ions and metal sheets on the production of organic acids, it can be inferred that oxalic acid may dominate in the corrosion process of A. carbonarius. In summary, molds promoted metal corrosion by producing organic acids, and the released metal ions will further promote the growth of mold and the accumulation of organic acids. This may be an important reason for the intensification of mold corrosion under microgravity. IMPORTANCE The space station and other long-term manned spacecrafts will experience the risk of microbial corrosion, especially mold, which will be harmful to the platform system and astronauts. Aspergillus sp. has been widely reported to produce organic acids that corrode and destroy materials, and the ability of these crafts to fly through space can be significantly affected. Research on the mechanism that causes enhanced corrosion ability of fungi in space stations is important to control their growth. Our research focuses on the interaction between mold and metals. In particular, it is found that metal ions promote mold growth and produce organic acids, thus accelerating mold corrosion of metals. Our results provide a new perspective for the control of fungal corrosion under simulated microgravity.

Effect and potential risks of using multilevel cement-augmented pedicle screw fixation in osteoporotic spine with lumbar degenerative disease.

BACKGROUND: The increase of augmented level and bone cement dose are accompanied by the rising incidence of cement leakage (CL) of cement-augmented pedicle screw instrumentation (CAPSI). But the effect and potential risks of the application of CAPSI to osteoporotic lumbar degenerative disease (LDD) have not been studied in the case of multilevel fixation. This study aimed to investigate the effectiveness and potential complications of using multilevel CAPSI for patients with osteoporotic LDD. METHODS: A total of 93 patients with multilevel LDD were divided into the CAPSI group (46 subjects) and the conventional pedicle screw (CPS) group (47 subjects), including 75 cases for three levels and 18 cases for four levels. Relevant data were compared between two groups, including baseline data, clinical results, and complications. RESULTS: In the CAPSI group, a total of 336 augmented screws was placed bilaterally. The CL was observed in 116 screws (34.52%). Three cemented screws (0.89%) were found loosened during the follow-up and the overall fusion rate was 93.47%. For perioperative complications, two patients (4.35%) experienced pulmonary cement embolism (PCE), one patient augmented vertebral fracture, and three patients (6.52%) wound infection. And in the CPS group, thirty-three screws (8.46%) suffered loosening in cranial and caudal vertebra with a fusion rate of 91.49%. The operation time and hospital stay of CAPSI group were longer than the CPS group, but CAPSI group has a lower screw loosening percentage (P<0. 05). And in terms of blood loss, perioperative complications, fusion rate, and VAS and ODI scores at the follow-up times, there were no significant differences between the two groups. CONCLUSIONS: Patients with osteoporotic LDD underwent multilevel CPS fixation have a higher rate of screw loosening in the cranial and caudal vertebra. The application of cemented pedicle screws for multilevel LDD can achieve better stability and less screw loosening, but it also accompanied by longer operating time, higher incidence of CL, PCE and wound infections. Selective cement augmentation of cranial and caudal pedicle screws may be a worthy strategy to decrease the complications.

Influence of cement-augmented pedicle screws with different volumes of polymethylmethacrylate in osteoporotic lumbar vertebrae over the adjacent segments: a 3D finite element analysis.

BACKGROUND: Polymethylmethacrylate (PMMA) is commonly used for cement-augmented pedicle screw instrumentation (CAPSI) to improve the fixation stability and reduce the risk of screw loosening in the osteoporotic thoracolumbar spine. Biomechanical researches have shown that various dose of cement (1-3 ml) can be injected to enhance screw stability. To date, there have been no studies on the relationship between adjacent segment degeneration and the volume of PMMA. This study aimed to explore the influence of CAPSI with different volumes of PMMA in osteoporotic lumbar vertebrae over adjacent segments by using finite element analysis. METHODS: Seven different finite element models were reconstructed and simulated under different loading conditions, including (1) an intact model, (2) three single-level CAPSI models with different volumes of PMMA (1, 1.73, and 2.5 ml), and (3) three double-level CAPSI models with different volumes of PMMA (1, 1.73, and 2.5 ml). To improve the accuracy of the finite element analysis, the models of the injectable pedicle screw and bone cement were created by using a three-dimensional scanning machine and the CAPSI patient's CT data, respectively. The range of motion (ROM), the stress of intervertebral discs, and the stress of facet in the adjacent segment were comparatively analyzed among the different models. RESULTS: The ROMs of the different segments were compared with experimental data, with good agreement under the different load conditions (21.3°, 13.55°, 13.99°, and 6.11° in flexion, extension, bending, and rotation at L3-S1 level, respectively). Compared with the intact model, the ROM, disc stresses, and facet stress in adjacent segments were found to be higher in the six operative models. Otherwise, with a larger volume of PMMA injected, the ROM, disc stresses, and facet stress slightly increased at the adjacent segment. However, the differences were insignificant with the biggest difference less than 3.8%. CONCLUSIONS: CAPSI could increase the incidence of disk degeneration in the adjacent segment, while within a certain range, different volumes of PMMA provided an approximate impact over the adjacent segment degeneration.

Vps4b heterozygous mice do not develop tooth defects that replicate human dentin dysplasia I.

BACKGROUND: Vacuolar protein sorting-associated protein 4B (VPS4B) is a member of the ATP enzyme AAA protein family, and is mainly involved in protein degradation and cell membrane fusion. Recently, a dominant mutation in this gene was identified in human dentin dysplasia type I (DD-I). Herein, we report the generation of Vps4b knockout (Vps4b KO) mice; however, the homozygous Vps4b KO mutation was embryonic lethal at the early stages of embryo development, and we therefore report the results of heterozygous mutant mice. RESULTS: Mice heterozygous for Vps4b did not develop tooth defects replicating human DD-I. Immunohistochemistry showed that gene KO was successful, as there was decreased expression of Vps4b in heterozygous mice; hematoxylin and eosin (H&E) staining also showed that the width of the pre-dentin zone was increased in heterozygous mice, although the arrangement of the odontoblasts was not significantly different from wild-type (WT) mice. However, H&E staining showed no obvious abnormalities in the bones of heterozygous mice. Moreover, stereomicroscopic and X-ray radiography results indicated no abnormal manifestations in teeth or bones. Furthermore, statistical analysis of the volume and density of dentin and enamel, as well as skeletal analysis, including the volume and separation of trabecular bone analyzed by micro-CT, all showed no differences between Vps4b heterozygotes and WT mice. In addition, there also were no significant differences in bone or cartilage mineralization as evaluated by Alcian blue-Alizarin red staining. CONCLUSIONS: The heterozygous Vps4b KO mice do not develop tooth defects that replicate human DD-I and this is likely to be due to differences in tooth development between the two species. Consequently, further studies are needed to determine whether mice are an appropriate animal model for human tooth diseases.

The cement leakage in cement-augmented pedicle screw instrumentation in degenerative lumbosacral diseases: a retrospective analysis of 202 cases and 950 augmented pedicle screws.

PURPOSE: To evaluate the incidence, type and risk factors of cement leakage (CL) with cement-augmented pedicle screw instrumentation (CAPSI) in degenerative lumbosacral disease. METHODS: Two hundred and two patients using a total of 950 cement-augmented screws were enrolled. CL was classified into three types: type S: leakage via segmental veins; type B: leakage via basivertebral veins; and type I: leakage via pedicle screw instrumentation to paravertebral soft tissue. The age, gender, operation stage (primary or later stage), body mass index, bone mineral density, the number and type of augmented screw, the position of the tip of screw (lateral or internal part of vertebral body), the position of screw (left or right side), the volume of bone cement, location of the augmented vertebra (lumbar or sacrum), the type of CL and complications were recorded. Binary logistic regression correlation was used to analyze risk factors of veins leakage (type S and type B). RESULTS: The CL was observed in 165 patients (81.68%) and 335 screws (35.26%), leakage types of S, B and I were seen in 255 (76.12%), 77 (22.99%), and 30 (8.96%) of screws, respectively. Besides, double or multiple routes of leakage were seen in 27 screws. Number of augmented screw was a risk factor for vein leakage (OR 0.58; 95% CI 0.44-0.77; P = 0.000). Furthermore, the doses of cement (OR 0.79; 95% CI 0.61-0.99; P = 0.038) and the position of screw (OR 0.39; 95% CI 0.29-0.53; P = 0.000) were identified as risk factors for type S, and the doses of bone cement (OR 0.37; 95% CI 0.25-0.54; P = 0.000) and the position of the tip of screw (OR 0.07; 95% CI 0.04-0.13; P = 0.000) were risk factors for type B. CONCLUSIONS: CAPSI bears a high risk of asymptomatic CL, with a higher rate of leakage into segmental veins and basivertebral veins. As is known, more augmented screws and larger doses of cement are risk factors for veins leakage (type S and type B), while the tip of screw approaching to the midline of the vertebral body is another risk factor to type B. Thus, the CL could be reduced by the amelioration of operative techniques and procedures. These slides can be retrieved under Electronic Supplementary Material.

Ladder chain Cd-based polymer as a highly effective adsorbent for removal of Congo red.

Developing of high effective and fast-rate adsorbent materials has been recently attracted intensive attentions all over the world due to organic dye polluted water treatment. However, few studies have been reported on the ultrahigh-capacity and fast-rate removal of Congo red. In this work, a new stable Cd-based coordination polymer exhibits excellent adsorption performance towards Congo Red. This ladder chain [Cd4(H2L)4(H2O)8(NDS)]n·3n(NDS) (I) (H2L = N1,N2-bis(pyridin-3-ylmethyl) ethane-1,2-diamine, 1,5-H2NDS = 1,5-naphthalene disulfonic acid) has been successfully synthesized by the hydrothermal reaction. At room temperature, the experimental adsorption capacity of coordination polymer (I) towards Congo red can reach up to 16,880 mg g-1 in 20 min (pH = 2.0-3.2), and its higher capacity and faster rate are all better than those in reported inorganic and metal-organic frameworks absorbents. The adsorption process is spontaneous and endothermic reaction, and fits well with the second-order kinetics, Langmuir and Scatchard isotherm adsorption models. The excellent adsorption performance of (I) towards Congo red is related to the strong electrostatic, various hydrogen bonding and π-π stacking interactions under acidic conditions.

Risk factor analysis for re-collapse of cemented vertebrae after percutaneous vertebroplasty (PVP) or percutaneous kyphoplasty (PKP).

PURPOSE: Re-collapse of cemented vertebrae occasionally occurs after percutaneous augmentation. However, the potential risks still remain unclear. Several articles have reported some possible risk factors which were not consistent or comprehensive. This study aimed to make a retrospective review on patients with osteoporotic vertebral compression fracture (OVCF) after percutaneous vertebroplasty (PVP) or percutaneous kyphoplasty (PKP) and to further analyse the risk factors for treated vertebral refracture. METHODS: All patients receiving the PKP/PVP with bilateral approach were retrospectively reviewed from January 2014 to January 2016, among whom 230 patients with single level augmentation (30 in refracture group and 200 in the non-refracture group) were enrolled according to inclusion criteria. The following covariates were reviewed: gender, age, height, weight, body mass index (BMI), bone mineral density (BMD), serum bone turnover markers, surgical parameters including approach, cement volume, anterior height, and Cobb angle restoration. Binary logistic regression analysis was used to determine the relative risk of re-collapse of cemented vertebrae. RESULTS: Regarding the patient data, weight, BMI, and BMD were of statistical significance in refracture group (P < 0.01), among which only low BMD was a risk factor to cemented vertebral re-collapse (P = 0.022, OR = 4.197). In respect of surgical variables, the better restoration of anterior height and Cobb angle was found in refracture group (P < 0.05), both of which might increase the refracture risk but not be risk factors (P = 0.065, OR = 0.891, and P = 0.937, OR = 0.996, respectively). Besides, less injected cement (3.30 ± 0.84 ml vs 4.46 ± 1.10 ml, P = 0.000, OR = 19.433) and PKP (P = 0.007, OR = 13.332) significantly boosted the potential risk of refracture (P < 0.001). CONCLUSION: Patients with low BMD, or undergoing PKP, or receiving a low volume of injected cement might have a high risk of re-collapse in surgical vertebrae.

Synergy Between Polyvinylpyrrolidone-Coated Silver Nanoparticles and Azole Antifungal Against Drug-Resistant Candida albicans.

In the clinical practice, resistance of Candida albicans to antifungal agents has frequently emerged. Silver-nanoparticles (Ag-NPs) have been demonstrated to have the antifungal property. We investigated the potential for synergy between polyvinylpyrrolidone (PVP)-coated Ag-NPs and azole antifungal, such as fluconazole or voriconazole, against drug-resistant C. albicans strain CA10. When antifungal agent was examined alone, fluconazole and voriconazole did not kill drug-resistant C. albicans, and PVP-coated Ag-NPs had only the moderate killing ability. In contrast, the combinational treatment of PVP-coated Ag-NPs with fluconazole or voriconazole was effective in being against the drug-resistant C. albicans. After the combinational treatment, we detected the disruption of cell membrane integrity, the tendency of PVP-coated Ag-NPs to adhere to cell membrane, and the inhibition of budding process. Moreover, after the combinational treatment, the defects in ergosterol signaling and efflux pump functions were detected. Our results suggest that the combinational use of engineered nanomaterials (ENMs), such as PVP-coated Ag-NPs, with the conventional antifungal may be a viable strategy to combat drug-resistant fungal infection.

Measurement of the friction between single polystyrene nanospheres and silicon surface using atomic force microscopy.

In the present work, the individual nanoparticles have been manipulated on a silicon surface, using atomic force microscope (AFM) techniques. As a model system, near-spherical polystyrene nanoparticles with radii from 28.85 nm to 228.2 nm were deposited on a nanosmooth silicon wafer. Experiments demonstrated that when the normal force is above a threshold load, nanoparticles could steadily be pushed by the tip of the AFM along the defined pathway. The tests allow us to quantitatively study the interfacial friction between the nanoparticle and the surface. It was found that the friction could be affected by various factors such as the load, the particle size, and the surface treatment. The results showed that the friction between particles and substrate is proportional to the two-third power of the radius, which is in agreement with the Hertzian theory. It can also be seen that the ratio between the kinetic and the static friction was slightly changed from 0.3 to 0.6, depending on the size of the particles. However, the value of the ratio was little affected by other factors such as the particles' location, the tip normal force and the surface modification. The results provided new insights into the intriguing friction phenomenon on the nanoscale.

Bone marrow suppression or active proliferation? An analysis of neutropenia after pegylated interferon treatment of patients with chronic hepatitis C.

BACKGROUND: Neutropenia is a common adverse effect of the treatment of chronic hepatitis C with pegylated interferon and ribavirin. However, the mechanism involved is unknown. The present study aimed to investigate the cause of treatment-induced neutropenia by determining cytokine levels in plasma and in bone marrow smears. METHODS: Fifteen patients with chronic hepatitis C were enrolled in this study. Plasma cytokine levels were determined using the Luminex assay before and during treatment. We simultaneously determined the levels of granulocyte colony-stimulating factor (G-CSF), granulocyte-macrophage colony-stimulating factor (GM-CSF), and 7 other cytokines, and performed bone marrow cytology when blood cell counts indicated neutropenia. RESULTS: Only 1 bone marrow smear indicated a low cell proliferation level, whereas active proliferation was observed in the remaining 14 patients. The levels of G-CSF, GM-CSF, interleukin (IL)-2, IL-4, IL-6, and interferon (IFN)-γ decreased significantly in patients with neutropenia (p < 0.05). In contrast, the levels of IL-8, IL-10, and tumor necrosis factor (TNF)-α showed no significant change (p = 0.713, 0.930, 0.833, respectively) before or after treatment. CONCLUSIONS: The bone marrow of most patients with IFN-induced neutropenia showed active cell proliferation. Elevated G-CSF and GM-CSF but not bone marrow suppression was observed along with neutropenia after pegylated interferon treatment, suggesting a causative role of G-CSF and GM-CSF in neutropenia.

Different doses of vitamin D supplementation to nonsurgical treatment for vitamin-D-insufficient patients with diabetic periodontitis and the effect on gingival BMP-2 levels.

Epidemiological data show people with diabetes mellitus (DM) have three-fold increase in risk of periodontitis. A vitamin D insufficiency can affect the progression of DM and periodontitis. This study evaluated the effects of different-dose vitamin D supplementation to nonsurgical periodontal therapy for vitamin-D-insufficient diabetic patients coexisting with periodontitis and changes of gingival bone morphogenetic protein-2 (BMP-2) levels. The study included 30 vitamin-D-insufficient patients receiving nonsurgical treatment followed by administration of 25,000 international units (IU) vitamin D3 per week (the low-VD group) and 30 patients receiving 50,000 UI vitamin D per week (the high-VD group). The decreases of probing pocket depth, clinical attachment loss, bleeding index, and periodontal plaque index values of patients after the six-month supplementation of 50,000 UI vitamin D3 per week to nonsurgical treatment were more significant than those after the six-month supplementation of 25,000 UI vitamin D3 per week to nonsurgical treatment. It was found that 50,000 IU per week vitamin D supplementation for 6 months could lead to a better glycemic control for vitamin-D-insufficient diabetic patients coexisting with periodontitis after nonsurgical periodontal therapy. Increased levels of serum 25(OH) vitamin D3 and gingival BMP-2 were found in both low- and high-dose VD groups, and the high-dose VD group exhibited higher levels than the low-dose VD group. Vitamin D supplementation in large doses for 6 months tended to improve the treatment of periodontitis and increase gingival BMP-2 levels in diabetic patients coexisting with periodontitis who were vitamin D deficient.

Association between Social Participation and Remaining Teeth and Urban-Rural Difference among Older Adults in China.

Oral health is an important part of older adults' general health. The study examined the association between social participation (formal and informal) and remaining teeth and the urban-rural difference based on a national survey of older adults in China. The data of older adults were extracted from the Chinese Longitudinal Healthy Longevity Survey (CLHLS) and analyzed. A total of 11,948 respondents were ultimately involved, including 6836 urban respondents and 5112 rural respondents. Informal social participation and formal social participation were used to assess social participation. The number of remaining natural teeth was measured. Social participation was significantly associated with remaining teeth among older adults, after adjusting for confounders, a one-level increase in the informal social participation was associated with a decrease in natural teeth by 0.152 (95% CI = -0.274; -0.030) and a one-level increase in the formal social participation was associated with a decrease in natural teeth by 0.370 (95% CI = -0.585; -0.156). In addition, the association between social participation (formal and informal) and remaining teeth was observed among urban older adults, but not rural older adults. A high level of social participation may effectively decrease the risk of oral-health problems for the Chinese older adults. The findings suggest recommendations for an older adults-targeted policy and the practice of oral-health promotion. However, the urban-rural difference should be taken into full consideration in social-participation-driven oral-health promotion interventions.

[Analysis of thyroid dysfunction and influencing factors in chronic hepatitis C patients treated with peg-IFNa-2a and ribavirin].

OBJECTIVE: To analyze the frequency of thyroid dysfunction and determine its influencing factors in chronic hepatitis C (CHC) patients treated with pegylated-interferon alpha (peg-IFNa)-2a and ribavirin (RBV) combination therapy. METHODS: A total of 194 CHC patients were treated with peg-IFNa-2a and RBV for 48 weeks. Development of thyroid dysfunction was recorded. Clinical and biological factors from pre-treatment (baseline) to post-treatment were statistically analyzed to determine correlation with thyroid dysfunction in this patient population. RESULTS: Fifty-two (26.80%) of 194 peg-IFNa-2a/RBV-treated patients developed thyroid dysfunction. Dysfunction severity ranged from hyperthyroidism (n = 1, 0.52%) and hypothyroidism (n = 10, 5.15%) to subclinical hyperthyroidism (n = 4, 2.06%) and subclinical hypothyroidism (n = 37, 19.07%). The dysfunction rate was significantly higher after peg-IFNa-2a/RBV treatment (26.80% vs. 12.37% at baseline, x2 = 12.829, P less than 0.05, odds ratio (OR) = 0.386, 95% confidence interval (CI): 0.226-0.657), in females (33.00% vs. 20.21% in males, P less than 0.05, 95% CI: 1.016-3.040), and in thyroid auto-antibody positive patients (64.29% vs. 23.89% in negative patients, P less than 0.05, 95% CI: 1.681-36.183). Early virological response did not have any significant effect on dysfunction rate (23.00% vs. 30.85% no early virological response, x2 = 1.522, P more than 0.05) nor did end of treatment response (27.19% vs. 26.25% no response at end of treatment, x2 = 0.021, P more than 0.05). Patients who developed thyroid dysfunction had higher interleukin (IL)-6 at baseline (i.e. before peg-IFNa-2a/RBV treatment) (27.08+/-14.90 vs. 11.65+/-5.46 in patients who maintained normal thyroid function, t = 3.127, P less than 0.05, 95% CI: 5.28-25.58). IL-6 levels were not significantly different between the two groups at 24 weeks (6.30+/-2.47 vs. 6.81+/-2.80, t = 0.352, P more than 0.05). IL-6 levels before and after 48 weeks of treatment in normal thyroid function patients were 27.08+/-14.90 and 6.30+/-2.47, t = 3.632, P less than 0.05, and in thyroid dysfunction patients were 11.65+/-5.46 and 6.81+/-2.80, t = 1.997, P more than 0.05. CONCLUSION: Peg-IFNa-2a/RBV combination therapy may cause thyroid dysfunction, especially hypothyroidism, in CHC patients. Female sex and thyroid auto-antibody positivity may put CHC patients at higher risk of developing thyroid dysfunction during peg-IFNa-2a/RBV therapy. Elevated IL-6 may be a predictive marker of peg-IFNa-2a/RBV-induced thyroid dysfunction.

Long-term efficacy and safety of bone cement-augmented pedicle screw fixation for stage III Kümmell disease.

This study aimed to evaluate the efficacy and safety of bone cement-augmented pedicle screw fixation for stage III Kümmell disease. Twenty-five patients with stage III Kümmell disease who received bone cement-augmented pedicle screw fixation at the First Affiliated Hospital of Guangzhou University of Chinese Medicine between June 2009 and December 2015 were enrolled. All patients were females with a history of osteoporosis. The vertebral Cobb angle (V-Cobb angle), the fixed segment Cobb Angle (S-Cobb angle), pelvic parameters, visual Analogue Scale (VAS) score, and Oswestry Disability Index (ODI) were assessed preoperatively, postoperatively and at the final follow-up. Complications, loosening rate, operation time, and intraoperative bleeding were recorded. The average lumbar vertebral density T-value was - 3.68 ± 0.71 SD, and the average age was 71.84 ± 5.39. The V-Cobb angle, S-Cobb angle, and Sagittal Vertical Axis (SVA) were significantly smaller postoperatively compared to the preoperative values. The VAS and ODI at 1 month after surgery were 3.60 ± 1.00 and 36.04 ± 6.12%, respectively, which were both significantly lower than before surgery (VAS: 8.56 ± 1.04, ODI: 77.80 ± 6.57%). Bone cement-augmented pedicle screw fixation is a safe and effective treatment for stage III Kümmell disease. It can effectively correct kyphosis, restore and maintain sagittal balance, and maintain spinal stability.

A Cleverly Designed Novel Lipid Nanosystem: Targeted Retention, Controlled Visual Drug Release, and Cascade Amplification Therapy for Mammary Carcinoma in vitro.

OBJECTIVE: To construct an ideal theranostic nanoplatform (LIP3); to clarify its physicochemical properties; to confirm its characteristics of dual-modality imaging, active-targeting, and cascade amplification therapy for mammary carcinoma; and to perform a preliminary exploration of the cytotoxicity mechanism. DESIGN: A self-prepared liposome nanosystem, LIP3, can actively target 4T1 cells because the surface is linked with C-RGD. Haematoporphyrin monomethyl ether (HMME), an excellent sonosensitizer entrapped in the lipid bilayer, can function in photoacoustic imaging. Low-intensity focused ultrasound (LIFU) of ultrasound-targeted microbubble destruction (UTMD) promotes localized drug delivery into tumours because PFH, a phase-change substance, is loaded in the LIP3 core, achieving visualization of targeted drug release, and sonodynamic therapy (SDT) can kill tumour cells. SDT provides a favourable environment for AQ4N, resulting in amplification of LIP3 treatment. Therefore, LIP3 shows targeted aggregation and targeted release, integrating dual-mode imaging and precise treatment. RESULTS: The self-prepared lipid nanosystem, LIP3, meets the above expectations and has ideal physicochemical properties, with a regular sphere with uniform distribution. Contrast-enhanced ultrasound (CEUS), photoacoustic imaging, and bimodal imaging were effective in vitro. In 4T1 cell experiments, the cell capacity was as high as 42.9%, and the cytotoxicity to 4T1 was more than 5 times that of LIP1 (containing AQ4N only) and more than 2 times that of LIP2 (containing only HMME), achieving comparable results as cascade therapy for mammary cancer. CONCLUSION: LIP3, a theranostic nanoplatform, was successfully constructed and conformed to the physicochemical characterization of ideal nanoparticles, with active-targeting, dual-modality imaging, visualized drug release, and precise treatment under the action of LIFU. SDT provides a favourable environment for AQ4N, resulting in amplification of LIP3 treatment. Therefore, LIP3 shows targeted aggregation and targeted release, integrating dual-mode imaging, and precise cascade treatment. This unique theranostic NPS with multiple capabilities is expected to be a favourable anti-cancer method in the future.

A compound heterozygous mutation of the alkaline phosphatase ALPL gene causes hypophosphatasia in a Han Chinese family.

Hypophosphatasia (HPP) is a rare hereditary systemic disease that is characterized by defective bone and/or dental mineralization, and is caused by mutations in the alkaline phosphatase gene (ALPL). The present study investigated the ALPL mutation in a Chinese Han family with HPP and studied the pathogenesis of the mutations of the ALPL gene. DNA was extracted from peripheral venous blood of the family members. Sanger sequencing was used to screen the mutations. Associations between pathogenesis for both mutations were analyzed by bioinformatics, subcellular localization, measurement of enzyme activity and western blotting. Sanger sequencing revealed the compound heterozygous mutations c.203C>T (p.T68M) and c.571G>A (p.E191K). The mutations were located at exon 4 and 6 of the ALPL gene and were predicted by Polyphen-2 analysis to be harmful. Protein analysis indicated a decrease in mature protein production and lower enzyme activity in 293T cells transfected with plasmids carrying the mutations. The ALPL gene was cloned into the pcDNA3.1(+) vector and mutant plasmids ALPL-pT68M and ALPL-pE191K were constructed. Immunofluorescence observed in cells transfected with the ALPL-pE191K mutant plasmid was mainly located in the cell membrane. However, staining in the cytoplasm was increased compared with the wild type, and almost no fluorescence was identified in 293T cells transfected with the ALPL-pT68M mutant plasmid. The present findings demonstrated that the compound heterozygous c.571G>A and c.203C>T mutations may contribute to childhood HPP by resulting in mislocalization, decreased protein expression and loss of enzyme activity in a Han Chinese family. The results of the current study may provide insights into the potential molecular mechanism of HPP.

IR780-based light-responsive nanocomplexes combining phase transition for enhancing multimodal imaging-guided photothermal therapy.

Near-infrared (NIR) light-triggered photothermal therapy (PTT) has been widely applied for treating cancer. The combination of nanotechnology and NIR has shown great promise for promoting the efficacy of PTT. However, PTT alone could not completely ablate the tumors and easily causes tumor recurrence. To overcome this challenge, many studies have been performed to enhance PTT, including combining chemical therapy and radiotherapy, both of which have side effects on the body. To reduce the side effects and enhance PTT, a new infrared IR780-based nanocomplex combining liquid fluorocarbon perfluoropentane (PFP) has been synthesized for enhancing multimodal imaging-guided PTT. Under NIR irradiation, the size changes of PFP-loaded nanobubbles transforming into microbubbles allow ultrasound (US) imaging, showing boundaries and internal information of tumors. The breakup process and cascade reaction of phase transition can improve intratumoral permeation and retention of nanoparticles in nonmicrovascular tissue and damage the cell membranes of tumors, further enhancing PTT to kill tumor cells. The strong absorption in the NIR field of IR780-loaded NPs allows not only photoacoustic (PA) imaging but also NIR fluorescence (NIRF) imaging, which provides more anatomical information about tumors. This nanocomplex exhibits good biocompatibility and nontoxicity, strong PA/US/NIRF imaging contrast, excellent liquid-gas transition and a photothermal effect. This finding provides a new method to enhance multimodal imaging-guided cancer nanotheranostics.

Augmented pedicle trajectory applied on the osteoporotic spine with lumbar degenerative disease: mid-term outcome.

PURPOSE: To compare the safety and efficiency of cement-augmented pedicle screw with traditional pedicle screw technique applied on the patients in the osteoporotic spine with lumbar degenerative diseases. METHODS: Fifty-six patients followed up at least 2 years were enrolled in our institute with retrospectively reviewed from January 2009 to June 2014, diagnosed as lumbar spondylolisthesis, or lumbar stenosis, with T score ≤- 2.5 SD of BMD, and received less than three-segment PLIF or TLIF. All patients were divided into 2 groups: 28 (2 males, 26 females) in polymethylmethacrylate-augmented pedicle screw group (PSA) group, the other 28 (3 males, 25 females) in traditional pedicle screw group (TPS). Surgical data including the operation time, intra-operative blood loss, hospitalization day and surgical complications were recorded, as well as the radiological parameters measured from the postoperative X-rays and CT scans containing the rates of fusion, screw loosening, and cage subsidence incidence. In addition, the visual analog scores (VAS) and Oswestry Disability Index (ODI) were evaluated preoperatively and postoperatively. RESULTS: The average follow-up period was 34.32 months (ranging from 24 months to 51 months). Compared with PSA group, operation time and average hospital stay in the TPS group decreased significantly (P < 0.05). While no statistical difference for blood loss between 2 groups (P > 0.05). At 2 years postoperation, from CT-scans, 2/172 screws loosening and 1/56 segment non-union occurred in PSA group, with significantly lower incidence than those in TPS group (8/152 screws loosening and 6/50 segments non-union occurred, P < 0.05). Regarding the cage subsidence, 24 segments found height loss (5.30 ± 1.92 mm) in PSA group without difference compared with that of 19 segments (4.78 ± 1.37 mm) in TPS group (P > 0.05). Besides, the number and the location of cages and the leakage of the cement were found out little related with the subsidence in the PSA group (P > 0.05). After surgeries, VAS and ODI at 1 month, 6 months, 12 months, and last follow-up improved significantly in two groups (P < 0.05). There were no significant differences in VAS and ODI preoperatively and postoperatively between 2 groups (P > 0.05). In addition, eight patients with asymptomatic trajectory PMMA leakages were detected. CONCLUSION: Cement-augmented pedicle screw technique is effective and safe in the osteoporotic spine with lumbar degenerative diseases, with better fusion rates and less screw loosening incidence. There is no difference in the fusion rate and loosening rate between the two groups in the single segment patients; however, there are better fusion rate and lower pedicle screw loosening rate of the PSA group in the double or multiple group patients.

Clinical Efficiency and Patient Preference of Immediate Digital Impression after Implant Placement for Single Implant-Supported Crown.

OBJECTIVE: To evaluate the time efficiency and patient preference of three impression techniques by comparing immediate digital impression performed directly after implantation with regular digital impression and conventional implant impression performed 3 months after implantation. METHODS: Twenty consecutive patients with a missing single molar or premolar who received implant treatment were recruited into this prospective self-controlled clinical trial. Three different impression techniques were performed after implant surgery on all the participants: An intraoral scanning (IOS) impression performed immediately after implant placement (immediate digital impression) was compared with a regular digital impression and a classic polyether impression (conventional implant impression) performed 3 months after implant surgery. The operating time of each impression technique was recorded. Patients were asked to complete a visual analogue scale (VAS) questionnaire on their perception of the three techniques to describe their satisfaction and preference. Statistical analyses were performed with the Wilcoxon signed rank test. RESULTS: The clinical time of the immediate digital impression (10.97 ± 2.1 min) was significantly shorter than that of the conventional implant impression (14.45 ± 3.0 min) (P < 0.05). The mean time of the immediate digital impression (10.97 ± 2.1 min) was statistically the same as that of the regular digital impression (10.23 ± 2.7 min) (P > 0.05). Participants' subjective evaluation indicated higher satisfaction with the immediate digital impression than with the regular digital impression and the conventional implant impression. CONCLUSION: The immediate digital impression was more efficient than the conventional implant impression and had the same efficiency as the regular digital impression. Among the three impression techniques, the participants showed higher satisfaction with the immediate digital impression.

The Effect and Safety of Polymethylmethacrylate-Augmented Sacral Pedicle Screws Applied in Osteoporotic Spine with Lumbosacral Degenerative Disease: A 2-Year Follow-up of 25 Patients.

BACKGROUND: A high rate of instrumentation failure is frequently seen in osteoporotic spines, especially at the sacral segment because of the great shear stress. Several techniques of sacral pedicle screw placement, such as bicortical and tricortical fixation, have been developed; however, the problems of loosening and pulling out of the screws are still a concern. Recently, the polymethylmethacrylate (PMMA)-augmented pedicle screws have been shown to strengthen the purchase in osteoporotic spine, but there are few reports on the effect of S1 pedicle screw with PMMA augmentation. METHODS: Seventy-five patients receiving cement-augmented pedicle screws at lumbosacral vertebra were enrolled and divided into 3 groups by different patterns of S1 pedicle screw placement: S1 pedicle screw with PMMA augmentation (group A, 25 patients), S1 bicortical pedicle screw fixation (group B, 25 patients), and S1 tricortical pedicle screw fixation (group C, 25 patients). The Visual Analogue Scale (VAS) and Oswestry Disability Index (ODI) scores were assessed preoperatively and at the last follow-up. Besides, the complications, loosening rate, and fusion rate were recorded. RESULTS: The VAS and ODI scores at the last follow-up were significantly improved in the 3 groups compared with preoperative results. Better pain relief and functional improvement at the last follow-up was seen in group A compared with the other 2 groups; however, no significant difference was detected between groups B and C. Although the lowest screws loosening rates and the highest fusion rate were found in group A, no significant difference among these 3 groups. Furthermore, longer fusion segments and larger postoperative pelvic incidence-lumbar lordosis (PL-LL) were found as risks related to S1 screw loosening without cement augmentation. CONCLUSIONS: The S1 pedicle screws with PMMA augmentation achieved better stability with less screw loosening in the osteoporotic spine with lumbosacral degenerative diseases compared with bicortical/tricortical fixation at S1. This procedure is especially recommended for patients with long segment fixation and large postoperative PI-LL, but there is also a risk of bone cement leakage and a learning curve.