Multivariate analysis of alveolar bone dehiscence and fenestration in anterior teeth after orthodontic treatment: A retrospective study.

OBJECTIVE: To compare the prevalence of fenestration and dehiscence between pre- and post-orthodontic treatment and to explore the factors related to fenestration and dehiscence in the anterior teeth after treatment. METHODS: This study included 1000 cone-beam computed tomography (CBCT) scans of 500 patients before (T1) and after (T2) orthodontic treatment. These images were imported into Dolphin 11.9 software to detect alveolar fenestration and dehiscence in the anterior teeth area. The chi-square test and Fisher's exact test were performed to compare the prevalence of alveolar bone defects between time points T1 and T2. A total of 499 patients were selected for logistic regression analysis to examine the correlation among age, sex, crowding, sagittal facial type, extraction, miniscrew use and fenestration or dehiscence post-treatment. RESULTS: Except for the maxillary lingual fenestration and labial fenestration of mandibular canines, a significant change in the prevalence of fenestration and dehiscence was noted between time points T1 and T2 (P < .025). Multinomial logistic regression showed that age, miniscrew use and extraction highly influenced the prevalence of anterior lingual dehiscence (P < .05). Dehiscence of the mandibular labial side (skeletal Class III vs. I, OR = 2.368, P = .000) and fenestration of the mandibular lingual side (skeletal Class II vs. I, OR = 2.344, P = .044) were strongly correlated with the sagittal facial type. Dehiscence of the maxillary labial side (moderate vs. mild, OR = 1.468, P = .017) was significantly associated with crowding. CONCLUSIONS: Older age, maxillary moderate crowding, skeletal Class III, extraction and miniscrew potentially significantly affect the prevalence of anterior teeth dehiscence. Adult females, skeletal Class III patients on the mandibular labial side and skeletal Class II patients on the mandibular lingual side should be monitored for anterior teeth fenestration.

Long-term morphometric changes in the anterior alveolar bone in adolescents and adults after space closure: A retrospective study.

OBJECTIVES: To analyse the morphometric changes in the anterior alveolar bone of both the maxilla and mandible after space closure and retention for 18-36 mo in adults and adolescents. MATERIALS AND METHODS: Forty-two subjects with 4 first premolars extracted followed by retracting anterior teeth were included and divided into two age groups: adult group (4 males, 17 females, mean age: 23.67 ± 5.29 y, treatment duration: 27.95 mo, retention duration: 26.96 mo, ANB: 4.8 ± 2.1, U1-L1: 117.2 ± 9.2, U1-PP: 120.2 ± 7.2, L1-MP: 99.2 ± 5.3) and adolescent group (6 males, 15 females, mean age: 11.52 ± 1.21 y, treatment duration: 26.18 mo, retention duration: 25.79 mo, ANB: 5.2 ± 2.1, U1-L1: 116.0 ± 8.6, U1-PP: 119.8 ± 4.9, L1-MP: 99.7 ± 4.9). Alveolar bone height and thickness of anterior teeth in both groups were measured using cone beam computed tomography (CBCT) imaging performed at the pretreatment (T1), posttreatment (T2) and retention phases (T3). One-way repeated-measure ANOVAs were performed to evaluate the alveolar bone changes. Voxel-based superimpositions were performed to measure the amount of tooth movement. RESULTS: After orthodontic treatment, the lingual bone height and thickness of both arches and the labial bone height of the mandible decreased significantly in both age groups (P < .05). Most of the labial bone height and thickness of the maxilla in both groups remained unchanged (P > .05). After retention, the lingual bone height and thickness increased significantly in both age groups (P < .05). The amounts of increased height ranged from 1.08 to 1.64 mm in adults and from 0.78 to 1.21 mm in adolescents, and the amounts of increased thickness ranged from 0.23 mm to 0.62 mm in adults and from 0.16 mm to 0.36 mm in adolescents. Obvious movements of the anterior teeth during retention were not found (P > .05). CONCLUSIONS: Although lingual alveolar bone loss occurred in adolescents and adults during orthodontic treatment, continuous remodelling occurred in the later retention phase, which provides a reference for clinical treatment planning of bimaxillary dentoalveolar protrusion.

Comprehensive positional and morphological assessments of the temporomandibular joint in adolescents with skeletal Class III malocclusion: a retrospective CBCT study.

BACKGROUND: Condyle-fossa relationships in adolescents with skeletal Class III malocclusion remain unclear. Therefore, this study used cone-beam computed tomography (CBCT) to evaluate the position and morphology of the temporomandibular joint (TMJ) in adolescents with skeletal Class III malocclusion. METHODS: In this cross-sectional retrospective study, CBCT images from 90 adolescents with skeletal Class III malocclusion and 30 controls were analysed. Adolescents with skeletal Class III malocclusion were divided into different groups based on (1) sex (male and female), (2) sides (right and left), (3) age (early, middle, and late adolescence), and (4) vertical skeletal patterns (hyperdivergent, normodivergent, and hypodivergent). Morphology of the condyle and fossa as well as condylar position, was compared among groups. Data were collected and submitted for statistical analysis. This study adheres to STROBE guidelines. RESULTS: Regarding the intergroup comparisons, there were significant differences in TMJ position and morphology between the skeletal Class III malocclusion with different vertical skeletal patterns and control groups (P < 0.05). Within groups, condyle-fossa relationships differed significantly according to sex, age, and vertical skeletal patterns (P < 0.05); however, the mean values were not statistically different between left and right sides in adolescents with skeletal Class III malocclusion. CONCLUSIONS: Our findings can be used clinically and radiographically to evaluate the condyle and glenoid fossa features in adolescents with skeletal Class III malocclusion, providing a basis for better TMD diagnosis and orthodontic treatment.

Age-related variations in position and morphology of the temporomandibular joint in individuals with anterior openbite and crossbite: a multi-cross-sectional comparative study.

BACKGROUND: This study aimed to compare the age-related positional and morphological characteristics of the temporomandibular joint (TMJ) between individuals with anterior openbite or crossbite and controls. METHODS: This multi-cross-sectional comparative study analysed cone-beam computed tomography images of 750 participants, equally divided into the openbite, crossbite, and control groups (OBG, CBG, and CG, respectively). Each group was further divided into five subgroups (8-11 years, 12-15 years, 16-19 years, 20-24 years, and 25-30 years). Measurements of the TMJ included the position of the condyles in their respective fossae and morphology of the condyles and fossae. Data were submitted to statistical analysis. The study adhered to the STROBE Statement checklist for reporting of cross-sectional studies. RESULTS: Condyles were positioned more posteriorly with increasing age in all groups, and the condylar position was more posterior in the OBG than in the CBG. The articular eminence inclination increased with age in all the groups. There were significant differences in the articular eminence inclination among the three major groups at the age of > 15 years, and the condylar path was flatter in the CBG than in the OBG. CONCLUSIONS: Age-related morphological and positional characteristics of the TMJ differed considerably among OBG, CBG and CG. Contrary to CBG, OBG was found to have relatively posterior condylar position and steeper condylar path.

Biomimetic mineralisation systems for in situ enamel restoration inspired by amelogenesis.

Caries and dental erosion are common oral diseases. Traditional treatments involve the mechanical removal of decay and filling but these methods are not suitable for cases involving large-scale enamel erosion, such as hypoplasia. To develop a noninvasive treatment, promoting remineralisation in the early stage of caries is of considerable clinical significance. Therefore, biomimetic mineralisation is an ideal approach for restoring enamel. Biomimetic mineralisation forms a new mineral layer that is tightly attached to the surface of the enamel. This review details the state-of-art achievements on the application of amelogenin and non-amelogenin, amorphous calcium phosphate, ions flow and other techniques in the biomimetic mineralisation of enamel. The ultimate goal of this review was to shed light on the requirements for enamel biomineralisation. Hence, herein, we summarise two strategies of biological minimisation systems for in situ enamel restoration inspired by amelogenesis that have been developed in recent years and compare their advantages and disadvantages.

Semiconducting Polymer Dots for Point-of-Care Biosensing and In Vivo Bioimaging: A Concise Review.

In recent years, semiconducting polymer dots (Pdots) have attracted much attention due to their excellent photophysical properties and applicability, such as large absorption cross section, high brightness, tunable fluorescence emission, excellent photostability, good biocompatibility, facile modification and regulation. Therefore, Pdots have been widely used in various types of sensing and imaging in biological medicine. More importantly, the recent development of Pdots for point-of-care biosensing and in vivo imaging has emerged as a promising class of optical diagnostic technologies for clinical applications. In this review, we briefly outline strategies for the preparation and modification of Pdots and summarize the recent progress in the development of Pdots-based optical probes for analytical detection and biomedical imaging. Finally, challenges and future developments of Pdots for biomedical applications are given.

3D printing of 'green' thermo-sensitive chitosan-hydroxyapatite bone scaffold based on lyophilized platelet-rich fibrin.

The critical bone defect is still an urgent problem in the field of bone repair. Here, we reported a new type of chitosan (CS)-hydroxyapatite (HAP) scaffolds based on lyophilized platelet-rich fibrin (L-PRF) for releasing abundant growth factors to realize their respective functions. It also has strong mechanical properties to maintain the stability of the bone repair environment. However, acid-soluble CS hydrogels often contain toxic and organic solvents. Moreover, chemical agents may be used for cross-linking for better mechanical properties, further increasing cytotoxicity. In this study, we used an alkali/urea dissolution system to dissolve CS, which improved its mechanical properties and made it thermo-sensitive. Finally, the L-PRF-CS-HAP (P-C-H) composite scaffold was constructed by extrusion-based printing. The results showed that the printing ink had desirable printability and temperature sensitivity. The compressive properties of the scaffolds exhibited a trend of decline with L-PRF content increasing, but all of them could meet the strength of cancellous bone. Meanwhile, the scaffolds had high hydrophilicity, porosity, and could be degraded stablyin vitro. The antibacterial properties of the scaffolds were also verified, greatly reducing the risk of infection during bone repair. It was also demonstrated that the release time of growth factor from L-PRF was significantly prolonged, and growth factor could still be detected after 35 d of sustained release. The capacity of cells to proliferate increased as the number of L-PRF components increased, indicating that L-PRF still exhibited biological activity after 3D printing.

Effects of green tea extract epigallocatechin-3-gallate (EGCG) on oral disease-associated microbes: a review.

For thousands of years, caries, periodontitis and mucosal diseases, which are closely related to oral microorganisms, have always affected human health and quality of life. These complex microbiota present in different parts of the mouth can cause chronic infections in the oral cavity under certain conditions, some of which can also lead to acute and systemic diseases. With the mutation of related microorganisms and the continuous emergence of drug-resistant strains, in order to prevent and treat related diseases, in addition to the innovation of diagnosis and treatment technology, the development of new antimicrobial drugs is also important. Catechins are polyphenolic compounds in green tea, some of which are reported to provide health benefits for a variety of diseases. Studies have shown that epigallocatechin-3-gallate (EGCG) is the most abundant and effective active ingredient in green tea catechins, which acts against a variety of gram-positive and negative bacteria, as well as some fungi and viruses. This review aims to summarize the research progress on the activity of EGCG against common oral disease-associated organisms and discuss the mechanisms of these actions, hoping to provide new medication strategies for the prevention and treatment of oral infectious diseases, the future research of EGCG and its translation into clinical practice are also discussed.

Efficacy and Safety of Traditional Chinese Medicine Based on the Method of "Nourishing Kidney and Clearing Heat" as Adjuvant in the Treatment of Diabetes Mellitus Patients with Periodontitis: A Systematic Review and Meta-Analysis.

Objective: The aim of this systematic review and meta-analysis was to assess the efficacy and safety of traditional Chinese medicine based on the method of "nourishing kidney and clearing heat" as an adjuvant in the treatment of diabetes mellitus patients with periodontitis. Methods: An electronic literature search was conducted in the China National Knowledge Infrastructure (CNKI), Wanfang Data, Chinese Scientific Journals Database (VIP), Chinese Biomedical Literature Database (CBM), PubMed, EMBASE, Web of Science, and Cochrane Library databases for articles published until October 2021. The primary outcomes were probing pocket depth (PPD), clinical attachment loss (CAL), plaque index (PLI), and sulcular bleeding index (SBI), while the secondary outcomes were tooth mobility (TM), glycosylated hemoglobin (HbA1c), fasting blood glucose (FBG), total effective rate, and adverse effects. Results: Eleven randomized controlled trials (RCT) were included in the meta-analysis. The pooled results showed PPD (WMD = 1.07, 95%CI: (0.82, 1.33), P < 0.00001, I 2 = 89%), CAL (WMD = 0.78, 95%CI: (0.62, 0.93), P < 0.00001, I 2 = 58%), PLI (WMD = 0.44, 95%CI: (0.09, 0.79), P=0.01, I2 = 97%), SBI (WMD = 0.87, 95%CI: (0.79, 0.95), P < 0.00001, I 2 = 37%), TM (WMD = 0.26, 95%CI: (0.21, 0.30), P < 0.00001, I 2 = 31%), HbA1c (WMD = 0.48, 95%CI: (0.28, 0.67), P < 0.00001, I2 = 26%), FBG (WMD = 1.34, 95%CI: (0.96, 1.72), P < 0.00001, I 2 = 52%), total effective rate (RR = 1.24, 95%CI: (1.14, 1.34), P < 0.00001, I 2 = 0%), and adverse effects (RR = 0.78, 95%CI: (0.20, 3.03), P=0.72, I 2 = 0%) in the traditional Chinese medicine based on the method of "nourishing kidney and clearing heat" + routine western medicine treatment (periodontal basic treatment, PBT, with or without antibiotic) group were significantly improved compared to control group, but no significant difference was observed for PLI at 2-3 months and 6 months. Conclusions: This review supports traditional Chinese medicine based on the method of "nourishing kidney and clearing heat" as an adjuvant to routine western medicine treatment in the management of diabetes mellitus patients with periodontitis. Within the limits of the evidence, the well-designed, long-term efficacy, and high-quality multicenter RCTs need to be further confirmed.

SmokeMon: Unobtrusive Extraction of Smoking Topography Using Wearable Energy-Efficient Thermal.

Smoking is the leading cause of preventable death worldwide. Cigarette smoke includes thousands of chemicals that are harmful and cause tobacco-related diseases. To date, the causality between human exposure to specific compounds and the harmful effects is unknown. A first step in closing the gap in knowledge has been measuring smoking topography, or how the smoker smokes the cigarette (puffs, puff volume, and duration). However, current gold-standard approaches to smoking topography involve expensive, bulky, and obtrusive sensor devices, creating unnatural smoking behavior and preventing their potential for real-time interventions in the wild. Although motion-based wearable sensors and their corresponding machine-learned models have shown promise in unobtrusively tracking smoking gestures, they are notorious for confounding smoking with other similar hand-to-mouth gestures such as eating and drinking. In this paper, we present SmokeMon, a chest-worn thermal-sensing wearable system that can capture spatial, temporal, and thermal information around the wearer and cigarette all day to unobtrusively and passively detect smoking events. We also developed a deep learning-based framework to extract puffs and smoking topography. We evaluate SmokeMon in both controlled and free-living experiments with a total of 19 participants, more than 110 hours of data, and 115 smoking sessions achieving an F1-score of 0.9 for puff detection in the laboratory and 0.8 in the wild. By providing SmokeMon as an open platform, we provide measurement of smoking topography in free-living settings to enable testing of smoking topography in the real world, with potential to facilitate timely smoking cessation interventions.

Intranasal Delivery of Immunotherapeutic Nanoformulations for Treatment of Glioma Through in situ Activation of Immune Response.

PURPOSE: Some chemotherapeutics have been shown to induce both the release of damage-associated molecular patterns (DAMPs) and the production of type I interferon (IFN-I), leading to immunogenic cell death (ICD). However, the standard chemotherapy drug for glioma, temozolomide (TMZ), cannot induce ICD as it cannot activate IFN-I signaling. Moreover, inefficient delivery of immunostimulants across the blood-brain barrier (BBB) is the main obstacle to overcome in order to induce local immune responses in the brain. METHODS: A new oligonucleotide nanoformulation (Au@PP)/poly(I:C)) was constructed by coating gold nanoparticles (AuNPs) with methoxypolyethylene glycol (mPEG)-detachable (d)-polyethyleneimine (PEI) (Au@PP) followed by inducing the formation of electrostatic interactions with polyinosinic-polycytidylic acid (poly(I:C)). Intracranial GL261 tumor-bearing C57BL/6 mice were used to explore the therapeutic outcomes of Au@PP/poly(I:C) plus TMZ in vivo. The anti-tumor immune response in the brain induced by this treatment was analyzed by RNA sequencing and immunohistochemical analyses. RESULTS: Au@PP/poly(I:C) induced IFN-I production after endocytosis into glioma cells in vitro. Additionally, Au@PP/poly(I:C) was efficiently accumulated in the glioma tissue after intranasal administration, which allowed the nanoformulation to enter the brain while bypassing the BBB. Furthermore, Au@PP/poly(I:C) plus TMZ significantly improved the overall survival of the tumor-bearing mice compared with group TMZ only. RNA sequencing and immunohistochemical analyses revealed efficient immune response activation and T lymphocyte infiltration in the Au@PP/poly(I:C) plus TMZ group. CONCLUSION: This study demonstrates that intranasal administration of Au@PP/poly(I:C) combined with TMZ induces ICD, thereby stimulating an in situ immune response to inhibit glioma growth.

Applicability of standardless semiquantitative analysis of solids by high-irradiance laser ionization orthogonal time-of-fight mass spectrometry.

A compact high-irradiance laser ionization time-of-flight mass spectrometry system has been developed for the multielemental analysis of solids. Helium was introduced into the ion source as a buffer gas to cool high kinetic energy ions and suppress the interference of multicharged ions. A special pulse train repelling mode was used to achieve explicit spectra. Two quantitative methods are described for the laser ionization mass spectrometry in this paper. The first of these is the routine calibration curve quantitation, in which various matrix-matched standards are required; the second method, which is based on the uniform correlation between the signal and elemental concentration of different samples, is more convenient and covers a typical dynamic range of 6 orders. All the investigations and results indicate satisfactory performance of the newly developed instrument and its applicability for simultaneous multielemental analysis of solid samples.

Determination of n-alkanes contamination in soil samples by micro gas chromatography functionalized by multi-walled carbon nanotubes.

A new method for separation of 11 n-alkanes: octane, o-nonane, n-decane, n-undecane, n-dodecane, n-tridecane, n-tetradecane, n-pentdecne, n-hexadecath, heptadecane, n-octadecane in soil samples was developed. Kuderna-Danish (K.D.) concentrator enrichment prior to ultrasonic extraction and the silicone chromatography column purification and with gas chromatography flame ionization detection (GC-FID) could be used for n-alkanes determination. The micro channels of open tubular column were fabricated onto a silicon wafer to replace the quartz capillary chromatographic column. The column structure and analysis parameters that affected the column separation were investigated and optimized. Under optimal conditions, the extract reagent was centrifuged and collected. A silicone chromatography column and a K.D. concentrator were used for further clean-up and enrichment. Using this method, the limits of detection (LOD) and limits of quantification (LOQ) were obtained in the range of 0.03-0.15 and 0.1-0.5 mg kg(-1) in soil samples, respectively. The relative standard deviation (RSD) was under 12%. The optimized procedure that presented good analytical performance (with recoveries ranging from 56.5% to 89.2%), was successfully applied to determine n-alkane content in farmland soil samples adjacent to a highway. The results showed that the MWCNTs-functionalized column is capable of separating the alkane contaminations with high resolution in about 3 min, which is much shorter than that of GC-MS and other conventional analytical methods, demonstrating its great potential for rapid analysis.