Development of a rat model for type 2 diabetes mellitus peri-implantitis: A preliminary study.

OBJECTIVE: To develop an in vivo model to simulate the complex internal environment of diabetic peri-implantitis (T2DM-PI) model for a better understanding of peri-implantitis in type 2 diabetic patients. MATERIALS AND METHODS: Maxillary first molars were extracted in Sprague-Dawley (SD) rats, and customized cone-shaped titanium implants were installed in the extraction sites. Thereafter, implants were uncovered and customized abutments were screwed into implants. A high-fat diet and a low-dose injection of streptozotocin were utilized to induce T2DM. Finally, LPS was locally injected in implant sulcus to induce peri-implantitis. RESULTS: In the present study, T2DM-PI model has been successfully established. Imaging analysis revealed that abundant inflammatory cells infiltrated in the soft tissue in T2DM-PI group with concomitant excessive secretion of inflammatory cytokines. Moreover, higher expression of MMP and increased number of osteoclasts led to collagen disintegration and bone resorption in T2DM-PI group. CONCLUSIONS: These results describe a novel rat model which stimulate T2DM-PI in vivo, characterized by overwhelming inflammatory response and bone resorption. This model has a potential to be used for investigation of initiation, progression and interventional therapy of T2DM-PI.

Partial Component-Retained 2-Stage Reconstruction in the Treatment of Infected Hip Arthroplasty.

BACKGROUND: It is considered the gold standard treatment for infected hip arthroplasty to remove and reimplant the corresponding whole set of implant components before and after infection control, but it usually causes substantial bone loss to remove the well-fixed cup or stem, which may increase the difficulty in reconstruction. We would like to determine whether infected hip arthroplasty can be treated without removal of a well-fixed cup or stem. METHODS: Patients with infected hip arthroplasty and a radiographically well-fixed, cementless cup or stem were selected. During the first surgical stage, we retained the stem or cup if these cannot be removed using a stem or cup extractor. We performed the reimplantation surgery after control of infection. RESULTS: From January 2008 to December 2016, 26 patients underwent partial component-retained 2-stage reconstruction. All the patients were free of infection with a mean follow-up time of 43.85 months. CONCLUSION: Partial component-retained 2-stage reconstruction may be a treatment option for infected total hip arthroplasty with a well-fixed component in patients.

Detection and characterization of the accessory mental foramen using cone-beam computed tomography.

OBJECTIVE: This study aimed to investigate the frequency and characteristics of accessory mental foramina (AMFs) and their bony canals in a selected Chinese population using cone-beam computed tomography (CBCT). MATERIALS AND METHODS: Reconstructed CBCT images of the mandible in 784 Chinese patients (305 males and 479 females) were retrospectively analysed to identify the AMF. The presence, dimension and location of the AMF as well as the origin and course of the associated bony canal were evaluated and classified. Variations in these characteristics were analysed according to gender, side and age. RESULTS: A total of 66 AMFs were found in 57 (7.3%) of the 784 patients. The frequency of AMFs was significantly influenced by gender and side of the mandible (p < .05). Most AMFs were located apically between apices of the first and second premolars. The high-position AMFs (above the mental foramen) accounted for 54.5% of the total. The mean horizontal and vertical diameters of the AMF were 1.38 ± 0.47 and 1.23 ± 0.37 mm, respectively. Two typical types of the bony canal leading to the AMF were identified according to their bifurcation site from the mandibular canal. Most bony canals originated from the anterior loop of the mental canal (56.1%) and coursed posterosuperiorly (36.3%). The mean length of the bony canals was 5.78 ± 2.31 mm. CONCLUSIONS: This study presents a considerable frequency of AMFs in a Chinese population. The high-position AMF and the associated bony canal coursing in the oblique upward direction appear frequently. Thus, clinicians should be alert to the presence of the AMF to avoid neurovascular complications especially when dental procedures require periosteum detachment and implant insertion in the mental region.

Advanced Antimicrobial and Anti-Infective Strategies to Manage Peri-Implant Infection: A Narrative Review.

Despite reductions in bacterial infection and enhanced success rate, the widespread use of systemic antibiotic prophylaxis in implant dentistry is controversial. This use has contributed to the growing problem of antimicrobial resistance, along with creating significant health and economic burdens. The basic mechanisms that cause implant infection can be targeted by new prevention and treatment methods which can also lead to the reduction of systemic antibiotic exposure and its associated adverse effects. This review aims to summarize advanced biomaterial strategies applied to implant components based on anti-pathogenic mechanisms and immune balance mechanisms. It emphasizes that modifying the dental implant surface and regulating the early immune response are promising strategies, which may further prevent or slow the development of peri-implant infection, and subsequent failure.

Assessing the impact of COVID-19 interventions on the hand, foot and mouth disease in Guangdong Province, China: a Bayesian modeling study.

Background: The non-pharmaceutical interventions (NPIs) against COVID-19 may have affected the transmission of hand, foot and mouth disease (HFMD). We aimed to assess the impact of the NPIs on HFMD in the high epidemic area of HFMD, Guangdong Province. Methods: The data of HFMD cases, etiological information, and meteorological factors in Guangdong from January 1, 2012, to December 31, 2021, were collected. Using a Bayesian structural time series (BSTS) model integrated counterfactual framework, we assessed the effect of NPIs on HFMD by different intervention periods, populations (gender, age, occupation), and cities. We further explored the correlation between the reduction of HFMD and socioeconomic factors in 21 cities. Results: A total of 351,217 HFMD cases were reported and 455,327 cases were averted in Guangdong Province during 2020-2021 with a reduction of 84.94% (95%CI: 81.63-87.22%) in 2020 and 29.49% (95%CI: 15.26-39.54%) in 2021. The impact of NPIs on HFMD differed by age and gender. The effects of NPIs were more remarkable for children aged 0-2 years and scattered children. We found that the relative reductions in 21 cities were related to the composition ratio of children and COVID-19 incidence. Conclusion: The reduction of HFMD incidence was significantly associated with COVID-19 NPIs, and school closure was an effective intervention to prevent HFMD outbreaks. Our findings will contribute to the development of HFMD prevention and control measures.

Revealing the relationship between molecular weight of lignin and its color, UV-protecting property.

Lignin has great potential as a natural, green, and sustainable broad-spectrum sunscreen active ingredient. However, the coexistence of dark color and sunscreen properties hinders its application in cosmetics. In this study, we focus on the effects of the molecular weight of lignin on tis UV-protecting property and color in order to prepare lignin-based sunscreen with high performance. A prepared sunscreen containing low molecular weight lignin (F5, <1000 g/mol) exhibits good UV-protecting property (sun protection factor (SPF) = 7.14) and light color advantages (ΔE = 46.2). Moreover, a strong synergistic effect on UV-protecting property exists between low molecular weight lignin and ethylhexyl methoxycinnamate (EHMC), resulting in high SPF of F5@EHMC-based sunscreen (55.56). Additionally, added TiO2 can efficiently mitigate the dark color of lignin-based sunscreens due to prominent covering power of TiO2. Moreover, lignin-based sunscreens have good biocompatibility with HaCaT cells. This work is useful for understanding the mechanism of the UV-protecting property and dark color of lignin, and for designing an efficient and safe lignin-based sunscreen.

Colloidal magnesium hydroxide Nanoflake: One-Step Surfactant-Assisted preparation and Paper-Based relics protection with Long-Term Anti-Acidification and Flame-Retardancy.

Enhancing the interfacial dispersion and suspension stability is crucial for magnesium hydroxide (Mg(OH)2) nanomaterials in the long-term deacidification of paper-based cultural relics. However, because of the low specific surface area and the poor solvent compatibility of as-prepared large-sized Mg(OH)2, it often tends to agglomerate and settle down during the usage and storage, that is harmful for paper protection due to its unevenly deacidification and nonuniformly distribution on paper cellulose. Herein, we propose a feasible preparation of colloidal Mg(OH)2 ultrathin nanoflakes with high dispersion stability via a simple one-step surfactant-assisted strategy. The surfactant acts as both a structure-direct agent to confine the growth of Mg(OH)2 with rich active sites and a surface modifier to enhance its solvent adaptability and dispersion stability, avoiding the common fussy procedure with additional steric stabilizer. Owing to the evenly interaction with free acid species therein and the uniformly distribution on the paper fiber as alkaline reserve, the as-obtained Mg(OH)2 presents the superior paper protection performance characterized by its safer pH of 7.29 for the original aged paper (pH = 5.03) and the excellent long-term anti-acidification effect with competitive pH of 5.47 after accelerated-aging at 105 °C for 5 months. Furthermore, Mg(OH)2 nanoflakes with surfactant-modified structure also endue them as an improved flame retardant for multifunctional paper protection. The protection with Mg(OH)2 has little effect on the paper surface properties and cellulose crystallinity, in line with the principle of least intervention. This work will put forward a feasible way toward colloidal Mg(OH)2 nanoflakes with excellent paper protection performance, shedding light on the development of emerging protection materials for paper-based cultural relics.

Foot-and-mouth disease virus VP1 promotes viral replication by regulating the expression of chemokines and GBP1.

Foot-and-mouth disease virus (FMDV) is an acute, highly contagious, and economically destructive pathogen of vesicular disease that affects domestic and wild cloven-hoofed animals. The FMDV VP1 protein is an important part of the nucleocapsid and plays a significant role during FMDV infection. However, the signal pathways mediated by VP1 in the life cycle of FMDV and the related mechanisms are not yet fully understood. Here, we performed RNA-seq to compare gene expression profiles between pCAGGS-HA-VP1 transfected PK-15 cells and pCAGGS-HA (empty vector) transfected PK-15 cells. The results showed 5,571 genes with significantly different expression levels, of which 2,981 were up-regulated and 2,590 were down-regulated. GO enrichment analysis showed that 51 GO terms were significantly enriched in cell components including protein complex, membrane and organelle part. KEGG enrichment analysis showed 11 KEGG pathways were significantly enriched which were mainly related to the immune system, infectious viral disease, and signal transduction. Among the up-regulated genes, the chemokines such as CCL5, CXCL8, and CXCL10 in turn promoted FMDV replication. In contrast, GBP1, an interferon-stimulated gene that was suppressed by VP1 and FMDV, could effectively inhibit FMDV replication. Our research provides a comprehensive overview of the response of host cells to VP1 protein and a basis for further research to understand the roles of VP1 in FMDV infection including the genes involved in FMDV replication.

The impact of enterovirus A71 vaccination program on hand, foot, and mouth disease in Guangdong, China: A longitudinal surveillance study.

Enterovirus A71 (EV71) vaccination program was introduced in 2016 in China. Based on a longitudinal surveillance dataset from 2012 to 2019 in Guangdong, China, we estimated the impact of the EV71 vaccination program on hand, foot, and mouth disease (HFMD) incidence, by using a counterfactual prediction made from synthetic control approach integrated with a Bayesian time-series model. We observed a relative reduction of 41.4% for EV71-associated HFMD cases during the post-vaccination period of 2017-2019, corresponding to 26,226 cases averted. The reduction of EV71-associated HFMD cases raised with the elevation of EV71 vaccine coverage by year. We found an indirect effect for the children aged 6-14 years who were less likely to be vaccinated. Whereas, the EV71 vaccine may not protect against non-EV71-associated HFMD. This study provides a template for ongoing public health surveillance of EV71 vaccine effectiveness with a counterfactual study design. Our results show strong evidence of the EV71 vaccination program working on reducing EV71-associated HFMD in real-world settings. The finding will benefit policy-making of EV71 vaccination and the prevention of HFMD.

Ni-Fe oxide-PEDOT modified anode coupled with BAF treating ammonia and nitrite in recirculating seawater of aquaculture system.

Efficient ammonia and nitrite removal in low nutrient recirculating seawater of recirculating aquaculture system (RAS) is critical for healthy cultivation. However, it is hard for conventional biological aerated filters (BAFs) to meet this demand under short hydraulic retention time (HRT). The electrooxidation-BAFs (E-BAFs) were constructed for efficient seawater treatment in a RAS of Sebastes schlegelii, with high activity anodic catalyst Ni-Fe oxide-PEDOT. Satisfactory ammonia removal (88.2% in E-BAFs, 33.7% higher than the control, stage 3) and nitrite removal (69.9 % in E-BAFs, 45.3% in the control) were achieved at HRT of 50 min. The proportion of nitrifying bacteria (Nitrospira, Nitrosomonas and Nitrosopumilus) and nitrification/denitrification genes (amoCAB, nxrAB, narGHI, et. al) were higher in E-BAFs than the control, suggesting better potential in functional bacteria enrichment. Aerobic colony number in RAS with E-BAFs was lower and specific growth rate (SGR) of Sebastes schlegelii (3.79%) was significantly higher, indicating a better culture effect.

Co-benefits of nonpharmaceutical intervention against COVID-19 on infectious diseases in China: A large population-based observational study.

Background: Nonpharmaceutical interventions (NPIs) are public health measures that aim to suppress the transmission of infectious diseases, including border restrictions, quarantine and isolation, community management, social distancing, face mask usage, and personal hygiene. This research aimed to assess the co-benefits of NPIs against COVID-19 on notifiable infectious diseases (NIDs) in Guangdong Province, China. Methods: Based on NID data from the Notifiable Infectious Diseases Surveillance System in Guangdong, we first compared the incidence of NIDs during the emergency response period (weeks 4-53 of 2020) with those in the same period of 2015-2019 and then compared that with the expected incidence during the synchronous period of 2020 for each city by using a Bayesian structural time series model. Findings: A total of 514,341 cases of 39 types of NIDs were reported in Guangdong during the emergency response period in 2020, which decreased by 50·7% compared with the synchronous period during 2015-2019. It was estimated that the number of 39 NIDs during the emergency response in 2020 was 65·6% (95% credible interval [CI]: 64·0% - 68·2%) lower than expected, which means that 982,356 (95% CI: 913,443 - 1,105,170) cases were averted. The largest reduction (82·1%) was found for children aged 0-14 years. For different categories of NIDs, natural focal diseases and insect-borne infectious diseases had the greatest reduction (89·4%), followed by respiratory infectious diseases (87·4%), intestinal infectious diseases (59·4%), and blood-borne and sexually transmitted infections (18·2%). Dengue, influenza, and hand-foot-and-mouth disease were reduced by 99·3%, 95·1%, and 76·2%, respectively. Larger reductions were found in the regions with developed economies and a higher number of COVID-19 cases. Interpretation: NPIs against COVID-19 may have a large co-benefit on the prevention of other infectious diseases in Guangdong, China, and the effects have heterogeneity in populations, diseases, time and space. Funding: Key-Area Research and Development Program of Guangdong Province.

In-situ membrane fouling control by electrooxidation and microbial community in membrane electro-bioreactor treating aquaculture seawater.

Ammonia and nitrite in aquaculture recirculating seawater need to be strictly controlled to avoid deleterious effects on aquatic organisms. However, traditional biological approach can hardly meet the standard due to the short hydraulic retention time (HRT) and nitrite accumulation. A Membrane Electro-Bioreactor (MEBR) was developed for ammonia removal enhancement and in-situ electrochemical membrane fouling mitigation. The fouling mechanism was first found to proceed via the standard filtration model. The flux decrease was mainly caused by an internal pore clogging phenomenon. Membrane fouling resistance was enhanced by increasing anode potential from 0 to 1.4 V vs. SCE (Saturated Calomel Electrode). The ammonia removal rate in the MEBR was above 95% (HRT: 2 h, after day-13) and membrane fouling was mitigated that operation duration was extended by 71.4%. Higher total proportion of Proteobacteria, Bacteroidetes, Planctomycetes and Actinobacteria was obtained in the MEBR, suggesting higher nitrification and nitrogen removal potentials.

Cryogenically printed flexible chitosan/bioglass scaffolds with stable and hierarchical porous structures for wound healing.

Wound healing is a dynamic and well-orchestrated process that can be promoted by creating an optimal environment with wound dressing. An ideal wound dressing material should possess a suitable matrix, structure and bioactive components, functioning synergistically to accelerate wound healing. Wound dressings that allow reproducibility and customizability are highly desirable in clinical practice. In this study, using chitosan (CS) as the matrix and bioglass (BG) as the biological component, a spatially designed dressing scaffold was fabricated from a home-made cryogenic printing system. The micro- and macro-structures of the scaffold were highly controllable and reproducible. The printed scaffold exhibited interconnected and hierarchical pore structures, as well as good flexibility and water absorption capacity, and these properties were not affected by the content of BG. Nevertheless, when the content of BGs exceeded 20% that of CS, the tension strength and elongation rate reduced, but in vitro antibacterial, cell proliferation and migration performance were enhanced. In vivo examinations revealed that the composite scaffold significantly promoted wound healing process, with the group having 30% bioglass showing better wound closure, neovascularization and collagen deposition than other groups. These results indicate that the 3D printed CS/BG composite scaffold is a promising dressing material that accelerates wound healing.

[Study on energy absorption of mouthguard splints by impact test].

PURPOSE: Using impact test to study energy absorption ability of mouthguard splints of different thickness and materials. METHODS: In this experiment, group 1 was BIOPLAST 5 mm splint, group 2 was BIOPLAST 4 mm splint, group 3 was BIOPLAST 3 mm splint，group 4 was BIOPLAST 2 mm splint and group 7 was BIOPLAST 1 mm splint. Group 5 was ERKOLOC-PRO 2 mm splint, group 6 was DURAN 2 mm splint. Mouthguard splints were clashed by impact head from different heights. Digital Image Correlation System was used to record the process of the test. Images were transferred to data processing software, to analyze incident speed, incident depth and rebound height of the impact head. Absorbed energy and energy absorption ratio were calculated to analyze energy absorption ability of mouthguard splints of different thickness and materials. The data were analyzed using SPSS 22.0 software package for one-way analysis of variance and LSD. RESULTS: The higher impact head fell, the larger energy absorption ratio was. There was significant difference among group 1, 2, 3, 4, 7 in average energy absorption ratio（P<0.05）, and group 7 was the largest. There was significant difference among group 4, 5, 6 in average energy absorption ratio（P<0.05）, among which group 4 and group 5 were larger. CONCLUSIONS: 3 mm splint is good enough to be used to make mouthguard, which is also thinner and more comfortable. Splint of soft material is more suitable for mouthguard than splint of hard material.

Novel injectable strontium-hardystonite phosphate cement for cancellous bone filling applications.

Injectable bone cement (IBC) such as those based on methacrylates and hydraulic calcium phosphate and calcium sulfate-based cements have been used extensively for filling bone defects with acceptable clinical outcomes. There is a need however for novel IBC materials that can address some of the inherent limitations of currently available formulations to widen the clinical application of IBC. In this study, we characterized a novel hydraulic IBC formulation consisting of bioactive strontium-doped hardystonite (Sr-HT) ceramic microparticles and sodium dihydrogen phosphate, herein named Sr-HT phosphate cement (SPC). The resultant cement is comprised of two distinct amorphous phases with embedded partially reacted crystalline reactants. The novel SPC formulation possesses a unique combination of physicochemical properties suitable for use as an IBC, and demonstrates in vitro cytocompatibility when seeded with primary human osteoblasts. In vivo injection of SPC into rabbit sinus defects show minor new bone formation at the SPC periphery, similar to those exhibited in sinus defects filled with a clinically available calcium phosphate cement. The current SPC formulation presented in this paper shows promise as a clinically applicable IBC which can be further enhanced with additives.

Effects of Programmed Local Delivery from a Micro/Nano-Hierarchical Surface on Titanium Implant on Infection Clearance and Osteogenic Induction in an Infected Bone Defect.

The two major causes for implant failure are postoperative infection and poor osteogenesis. Initial period of osteointegration is regulated by immunocytes and osteogenic-related cells resulting in inflammatory response and tissue healing. The healing phase can be influenced by various environmental factors and biological cascade effect. To synthetically orchestrate bone-promoting factors on biomaterial surface, built is a dual delivery system coated on a titanium surface (abbreviated as AH-Sr-AgNPs). The results show that this programmed delivery system can release Ag+ and Sr2+ in a temporal-spatial manner to clear pathogens and activate preosteoblast differentiation partially through manipulating the polarization of macrophages. Both in vitro and in vivo assays show that AH-Sr-AgNPs-modified surface renders a microenvironment adverse for bacterial survival and favorable for macrophage polarization (M2), which further promotes the differentiation of preosteoblasts. Infected New Zealand rabbit femoral metaphysis defect model is used to confirm the osteogenic property of AH-Sr-AgNPs implants through micro-CT, histological, and histomorphometric analyses. These findings demonstrate that the programmed surface with dual delivery of Sr2+ and Ag+ has the potential of achieving an enhanced osteogenic outcome through favorable immunoregulation.

[Study on periodontal responses on the compression side during early tooth movement into alveolar defect regenerated by a tissue engineering bone].

PURPOSE: To explore periodontal responses on the compression side during early tooth movement into alveolar defect regenerated by bone marrow mesenchymal stem cells (BMSCs) and porous granulated beta-tricalcium phosphate（ß-TCP） scaffolds. METHODS: Thirty New Zealand rabbits were used to establish bilateral mandibular defective alveolar bone model by extracting the mandibular first molars and expanding the sockets. The right mandibular alveolar defects were filled with a construct of ß-TCP scaffolds combined with BMSCs as experimental group. The left alveolar defects were repaired by ß-TCP scaffolds alone as control group. Eight weeks later, 6 rabbits were sacrificed to evaluate osteogenesis effect. The other rabbits were loaded orthodontic force to move the bilateral second molars forward for 4 weeks. Six rabbits in each group were sacrificed at 1, 2, 3, and 4 week after orthodontic tooth movement (OTM). The distance of OTM was measured, and the status of periodontal tissues was observed by H-E staining. The number of osteoclasts on the compression side of tooth was counted by tartrate-resistant acid phosphatase histochemistry. The results were compared between groups using SPSS 19.0 software package. RESULTS: After 8 weeks of bone grafting, the osteogenesis effect of the experimental group was better than the control group. The OTM distance in the experimental area was higher than that in the control area. At 2, 3 and 4 week of OTM, the number of osteoclasts in the experimental group was significantly higher than that in the control group. CONCLUSIONS: A tissue-engineered complex with ß-TCP scaffolds and BMSCs could well repair the alveolar bone defect. When the adjacent tooth moved into regenerated area, the new periodontal tissue had an active response, promoting to accelerate tooth movement.

Symmetry of root anatomy and root canal morphology in maxillary premolars analyzed using cone-beam computed tomography.

OBJECTIVE: This study aimed to use cone-beam computed tomography (CBCT) to evaluate the root anatomy and canal morphology of maxillary premolars in a Chinese population and determine their degree of bilateral symmetry. DESIGN: 774 CBCT images were retrospectively analyzed, representing 1387 maxillary first premolars and 1403 second premolars. The number of roots and canals were recorded. The morphology of root canal systems was determined according to Vertucci's classification. The symmetry of root and canal anatomies between maxillary contralateral premolars was further evaluated. RESULTS: The most common anatomy of maxillary first and second premolars was one-rooted with two canals (58.0%) and one-rooted with one canal (50.3%), respectively. The typical canal morphology was type IV (42.7%) in maxillary first premolars and type I (50.3%) in maxillary second premolars. One-rooted maxillary premolars exhibited a higher variability in the canal morphology, compared to two-rooted or three-rooted teeth. Maxillary second premolars exhibited greater anatomic symmetry than first premolars. The root and canal numbers showed bilateral symmetry between 80.2% of maxillary first premolar pairs and 81.8% of second premolar pairs. Bilateral symmetry in both number and morphology of roots and canals was observed for 72.3% of maxillary first premolar pairs and 73.2% of second premolar pairs. CONCLUSION: The root anatomy and canal morphology of maxillary premolars in a Chinese population were quite diversified. Maxillary contralateral premolars demonstrated a high degree of symmetry in root and canal anatomies, which enables practitioners to better determine the nature of the root canal system during treatment of opposite homonymous teeth.

[Analysis and prevention of dust pollution caused by 5 common prosthetic materials].

PURPOSE: To analyze and evaluate dust pollution in prosthodontic clinic and make proposal for reasonable protection. METHODS: This study analyzed the particle size, element composition and dust concentration of 5 materials which were commonly used in dental restorations (veneering ceramics, cobalt-chromium alloy, photosensitive plastic, hard base resin, advanced artificial teeth) by using scanning electron microscopy (SEM), X-ray energy dispersive spectrometer（EDS） and dust concentration laser tester, in order to assess the effects of prosthodontic dust posed on medical staff health and put forward reasonable suggestions for prevention and control of dust pollution. RESULTS: The particle size of veneering ceramics, cobalt-chromium alloy, photosensitive plastic, hard base resin and advanced artificial teeth was (2.15±3.00), (33.78±24.33), (7.78±11.86), (31.16±44.35) and (28.45±39.21)µm, respectively. The time weighted average respirable dust concentration of veneering ceramics was 0.393 mg/m2 which was beyond the scope of national security. CONCLUSIONS: Dust pollution is serious in prosthodontic clinic to which we should pay more attention and take appropriate prevention measures.

Characteristics of intrabony nerve canals in mandibular interforaminal region by using cone-beam computed tomography and a recommendation of safe zone for implant and bone harvesting.

BACKGROUND: Cone-beam computed tomography can accurately show anatomic structure of intrabony nerve canals in mandibular interforaminal region. PURPOSE: The aim was to evaluate the characteristics of intrabony nerve canals in mandibular interforaminal region by using cone-beam computed tomography (CBCT) and determine a safe zone for implant and bone harvesting. MATERIALS AND METHODS: Hemimandibles (824) CBCT images were obtained. The length of the anterior loop (AL), the length and diameter of the mandibular incisive canal (MIC) and its spatial distance in various landmarks were measured. RESULTS: The prevalence of the AL was 93.57%, and the MIC was 97.33%. The mean lengths of the anterior extension of the anterior loop (aAL), caudal extension of the anterior loop (cAL) and the MIC were 2.53 ± 1.27 mm, 6.04 ± 1.66 mm, 9.97 ± 5.15 mm, respectively. The MIC was closer to buccal border and inferior margin of mandible. The length of the AL and diameter of the MIC varied with gender. CONCLUSIONS: The safe zone recommended for implant surgery is 4 mm anterior and 8 mm inferior to the mental foramen, and 10 mm above the inferior margin of mandible. The chin bone should be harvested at least 10 mm below the tooth apices along with a limited depth of 4 mm.