Repair of critical sized cranial defects with BMP9-transduced calvarial cells delivered in a thermoresponsive scaffold.

Large skeletal defects caused by trauma, congenital malformations, and post-oncologic resections of the calvarium present major challenges to the reconstructive surgeon. We previously identified BMP-9 as the most osteogenic BMP in vitro and in vivo. Here we sought to investigate the bone regenerative capacity of murine-derived calvarial mesenchymal progenitor cells (iCALs) transduced by BMP-9 in the context of healing critical-sized calvarial defects. To accomplish this, the transduced cells were delivered to the defect site within a thermoresponsive biodegradable scaffold consisting of poly(polyethylene glycol citrate-co-N-isopropylacrylamide mixed with gelatin (PPCN-g). A total of three treatment arms were evaluated: PPCN-g alone, PPCN-g seeded with iCALs expressing GFP, and PPCN-g seeded with iCALs expressing BMP-9. Defects treated only with PPCN-g scaffold did not statistically change in size when evaluated at eight weeks postoperatively (p = 0.72). Conversely, both animal groups treated with iCALs showed significant reductions in defect size after 12 weeks of follow-up (BMP9-treated: p = 0.0025; GFP-treated: p = 0.0042). However, H&E and trichrome staining revealed more complete osseointegration and mature bone formation only in the BMP9-treated group. These results suggest that BMP9-transduced iCALs seeded in a PPCN-g thermoresponsive scaffold is capable of inducing bone formation in vivo and is an effective means of creating tissue engineered bone for critical sized defects.

An effective treatment of experimental osteomyelitis using the antimicrobial titanium/silver-containing nHP66 (nano-hydroxyapatite/polyamide-66) nanoscaffold biomaterials.

Effective treatment of osteomyelitis remains a formidable clinical challenge. The rapid emergence of multidrug-resistant bacteria has renewed interest in developing antimicrobial biomaterials using antiseptic silver ions to treat osteomyelitis. However, inadequate local retention and severe cytotoxic effects have limited the clinical use of ionic silver for bone grafts. We recently developed novel porous nano-hydroxyapatite/polyamide 66 (nHP66)-based nanoscaffold materials containing varied concentrations of silver ions (Ag+) (TA-nHAPA66) and oxidized titanium (TiO2), which was added as a second binary element to enhance antibacterial activity and biocompatibility. In this study, we establish a large cohort of rabbit model of experimental osteomyelitis and investigate the in vivo antimicrobial and therapeutic effects of TA-nHP66 biomaterials and their in vivo silver release kinetics. We find the TA-nHP66 scaffolds exhibit potent antibacterial activities against E. coli and S. aureus, support cell adhesion and cell proliferation of pre-osteoblasts, and stimulate osteogenic regulator/marker expression. Moreover, the TA2-nHP66 scaffold exerts potent antibacterial/anti-inflammation effects in vivo and promotes bone formation at the lesion site of osteomyelitis. We further demonstrate that TA2-nHP66 exhibits excellent biosafety profile without apparent systemic toxicities. Therefore, the TA-nHP66 scaffold biomaterials may be further explored as an effective adjuvant therapy for infected bone defects and/or osteomyelitis debridement.

Bone regeneration and infiltration of an anisotropic composite scaffold: an experimental study of rabbit cranial defect repair.

Tissue formation on scaffold outer edges after implantation may restrict cell infiltration and mass transfer to/from the scaffold center due to insufficient interconnectivity, leading to incidence of a necrotic core. Herein, a nano-hydroxyapatite/polyamide66 (n-HA/PA66) anisotropic scaffold with axially aligned channels was prepared with the aim to enhance pore interconnectivity. Bone tissue regeneration and infiltration inside of scaffold were assessed by rabbit cranial defect repair experiments. The amount of newly formed bone inside of anisotropic scaffold was much higher than isotropic scaffold, e.g., after 12 weeks, the new bone volume in the inner pores was greater in the anisotropic scaffolds (>50%) than the isotropic scaffolds (<30%). The results suggested that anisotropic scaffolds could accelerate the inducement of bone ingrowth into the inner pores in the non-load-bearing bone defects compared to isotropic scaffolds. Thus, anisotropic scaffolds hold promise for the application in bone tissue engineering.

A thermoresponsive polydiolcitrate-gelatin scaffold and delivery system mediates effective bone formation from BMP9-transduced mesenchymal stem cells.

Successful bone tissue engineering requires at the minimum sufficient osteoblast progenitors, efficient osteoinductive factors, and biocompatible scaffolding materials. We previously demonstrated that bone morphogenetic protein 9 (BMP9) is one of the most potent factors in inducing osteogenic differentiation of mesenchymal stem cells (MSCs). Here, we investigated the potential use of a biodegradable citrate-based thermosensitive macromolecule, poly(polyethyleneglycol citrate-co-N-isopropylacrylamide) (PPCN) mixed with gelatin (PPCNG) as a scaffold for the delivery of BMP9-stimulated MSCs to promote localized bone formation. The addition of gelatin to PPCN effectively enhanced the cell adhesion and survival properties of MSCs entrapped within the gel in 3D culture. Using the BMP9-transduced MSC line immortalized mouse embryonic fibroblasts (iMEFs), we found that PPCNG facilitated BMP9-induced osteogenic differentiation of iMEFs in vivo and promoted the formation of well-ossified and vascularized trabecular bone-like structures in a mouse model of ectopic bone formation. Histologic evaluation revealed that vascularization of the bony masses retrieved from the iMEFs + PPCNG group was significantly more pronounced than that of the direct cell injection group. Accordingly, vascular endothelial growth factor (VEGF) expression was shown to be significantly higher in the bony masses recovered from the iMEFs + PPCNG group. Taken together, our results suggest that PPCNG may serve as a novel biodegradable and injectable scaffold and carrier for gene and cell-based bone tissue engineering.

[Experimental research of antibacterial property and release characteristics of Titania and Ag containing nano-hydroxyapatite/polyamide 66 composite bone filling material in vitro].

OBJECTIVE: Titania and Ag containing nano-hydroxyapatite/polyamide 66 (TiO2-Ag-nHA/PA66) composite bone filling material has good biocompatibility and biological safety. To investigate the antibacterial effect and Ag+ release characteristics of TiO2-Ag-nHA/PA66 composite bone filling material containing different concentrations of Ag+ in vitro. METHODS: The n-HA/PA66 composite bone filling material A1 (material A1) was prepared by co-polymerization method, and TiO2-Ag-nHA/PA66 composite bone filling materials A2 and A3 (materials A2 and A3) were prepared by the same way containing Ag+ of 0.22wt% and 0.64wt%, respectively, and the TiO2 content was 2.35wt%. The materials A2 and A3 were respectively immersed in 50 mL simulated body fluid (SBF), and Ag+ concentration was measured by atomic absorption spectrometry at 1, 3, 7, 14, 21, and 49 days. The inhibition ring test and colony count method were used to evaluate antibiotic effect against Staphylococcus aureus and Escherichia coli, the anti-adhesion capacity of Staphylococcus aureus and Escherichia coli was observed by scanning electron microscope (SEM). RESULTS: There was no significant difference in the Ag+ concentration between materials A2 and A3 at 1 day and 3 days (P > 0.05); and there were significant differences in the Ag+ concentration between materials A2 and A3 after 7 days (P < 0.05). The inhibition ring diameters of materials A2 and A3 to Staphylococcus aureus and Escherichia coli reached the maximum at 1 day, which were (13.40 +/- 2.88), (9.40 +/- 1.14) mm and (23.60 +/- 1.14), (18.80 +/- 0.84) mm, showing significant difference (P < 0.05) between materials A2 and A3 respectively; and then, the diameter of inhibition ring reduced with the time. The antibacterial effect of materials A2 and A3 against Staphylococcus aureus and Escherichia coli lasted 15, 33 days and 9, 24 days, respectively. No inhibition ring was observed around material A1 all the time. And the inhibitory rates of materials A2 and A3 were 89.74% +/- 3.62%, 94.18% +/- 2.05% and 78.65% +/- 5.64%, 85.96% +/- 2.50%; showing significant differences (P < 0.05) among materials A1, A2, and A3. SEM showed that bacterial adhesion of materials A2 and A3 was obviously fewer than that of material A1. CONCLUSION: TiO2-Ag-nHA/PA66 composite bone filling material has antibacterial property against Staphylococcus aureus and Escherichia coli, and it has a good release effect in SBF.