Local injection of abaloparatide promotes mandibular condyle lengthening in adolescent rats via enhancing chondrogenesis and ossification.

BACKGROUND: Mandibular condylar hypoplasia negatively affects patient's facial appearance and dentofacial function. OBJECTIVE: To investigate the effect of local injection of the drug abaloparatide (ABL), an analogue of parathyroid hormone related protein (PTHrP), on promoting lengthening of the mandibular condyle. METHODS: Thirty adolescent male Sprague-Dawley rats were randomly divided into two groups, which received the injection of ABL or normal saline (the control) every 3 days in the temporomandibular joint (TMJ) cavity. Cone-beam computed tomography and immunohistochemistry assays were performed at 2, 4 and 6 weeks since the injection. Mandibular condylar chondrocytes (MCC) and pre-osteoblasts were treated with ABL or PBS, followed by the CCK-8 detection, IC50, real-time PCR assay, Western Blot and immunofluorescence staining. RESULTS: In vivo, compared with the control, the ABL group significantly increased the mandibular condylar process length (by 1.34 ± 0.59 mm at 6 weeks), the thickness of the cartilage layer, and enhanced the matrix synthesis. The ABL group had significant up-regulation of SOX 9, COL II, PTHrP and PTH1R, down-regulation of COL X in the cartilage, up-regulation of RUNX 2, and unchanged osteoclastogenesis in the subchondral bone. In vitro, the intra-TMJ injection of ABL promoted the MCC proliferation, with up-regulated expression of chondrogenic genes, and enhanced osteogenic differentiation of the pre-osteoblasts. CONCLUSIONS: Intra-TMJ injection of abaloparatide promotes mandibular condyle lengthening in the adolescent rats via enhancing chondrogenesis in the mandibular condylar cartilage and ossification in the subchondral bone.

Unilateral injection of botulinum toxin type A into the masseter muscle induces mandibular asymmetry in adolescent rats by suppressing the angular process growth.

INTRODUCTION: Mandibular asymmetry has negative impacts on maxillofacial aesthetics and psychological well-being. This study investigated the effects of unilateral injection of botulinum toxin type A (BTX-A) into the masseter muscle on mandibular symmetry. METHODS: Forty Wistar rats (4-week-old) were divided into 4 groups (n = 10): control, group 1 (1U BTX-A), group 2 (3U BTX-A), and group 3 (1U BTX-A for 3 times). BTX-A was injected into the right masseter of treatment groups. Cone-beam computerized tomography scans were taken before the injection and then at 2 weeks, 4 weeks, and 6 weeks after injection. Histologic and immunohistochemical staining were done for the condylar cartilage. RNA sequencing and quantitative reverse transcription polymerase chain reaction were used to detect gene expression in the angular process. RESULTS: In Groups 2 and 3, the right angular process length and the ramus height were reduced 4 weeks after injection, resulting in the mandibular midline deviating to the right side; the right condylar cartilage had reduced thickness and decreased expression of RUNX2, SOX9, and COL II (P <0.05). Two hundred sixty-one genes were differentially expressed (256 downregulated) in the angular process at 3 days post-BTX-A injection, and the calcium signaling pathway was unveiled through the Kyoto Encyclopedia of Genes and Genomes pathway enrichment analysis. Furthermore, TRPC1, Wnt5a, CaMKII, Ctnnb1, and RUNX2 expression were significantly downregulated at 1 and 3 days postinjection. CONCLUSIONS: Unilateral injection of BTX-A into the masseter muscle in adolescent rats induces mandibular asymmetry by suppressing the angular process growth on the injected side.

Immediate effect of clear aligners and fixed appliances on perioral soft tissues and speech.

OBJECTIVES: To compare the immediate three-dimensional (3D) perioral soft-tissue changes and impact on speech induced by clear aligners and fixed appliances. MATERIALS AND METHODS: In this repeated-measure experimental study, stereophotogrammetric 3D photographs of 40 participants were recorded before and immediately after the introduction of clear aligners and fixed appliances. The 3D surface meshes were registered to quantify changes in the direction and magnitude of nine soft tissue landmarks located on the upper and lower lips. Self-reported speech disturbance was evaluated using a questionnaire. Data were analysed using repeated-measures analysis of variance. RESULTS: In the vertical plane, the clear aligners induced inferior displacement (range 0.4-1.5 mm) for all nine landmarks (P < .01), whereas fixed appliances induced inferior displacement only of A-point (0.4 ± 0.9 mm), right crista philtri (0.5 ± 1.1 mm) and left crista philtri (0.7 ± 1.1 mm). The clear aligners induced greater vertical changes than fixed appliances for all landmarks (P < .05). In the sagittal plane, both clear aligners and fixed appliances slightly advanced all perioral landmarks, except subnasale. Fixed appliances caused greater changes than clear aligners for right cheilion (+0.8 mm), left cheilion (+0.8 mm) and labrale inferius (+0.9 mm) (P < .01). Both orthodontic appliances had a significant self-perceived effect on speech, with clear aligners affecting speech to a greater degree. CONCLUSION: Clear aligners and fixed appliances produced immediate effects on perioral soft tissues, which are most evident in the vertical plane for clear aligners, and in the sagittal plane for fixed appliances. Speech was affected by both appliances.

Three-dimensional digital assessment of typodont activations.

OBJECTIVES: Wax typodonts are widely used as pre-clinical teaching tools to test and research the complex force systems created by archwire activations, however, a limitation is the inability to quantify the resultant statically indeterminate tooth movements. The aim of this study was to develop an analogue-to-digital typodont system to quantify the effects of archwire activations on individual typodont teeth in three dimensions. METHODS: The typodont system was developed using CAD/CAM technology. Posterior expansion, squared, tapered, asymmetrical arch forms and reversed curve of Spee activations were tested with three repeats. The resulting three-dimensional movements of individual typodont teeth were assessed with six degrees of freedom (df). Cartesian coordinate systems were set for each tooth. Mesio-distal, bucco-lingual and intrusive-extrusive movements were assessed as changes in the location of the geometrically estimated centre of resistance in the x, y and z axes, respectively. Torque, tip and rotation movements were assessed as the rotations around the mesio-distal, bucco-lingual and intrusive-extrusive axes, respectively. RESULTS: Individual typodont tooth displacements from each activation could reliably be described with six df. The transversal-to-sagittal movement ratio ranged from 2:1 to 7:1, depending on the activation. Asymmetrical arch form activations caused a midline shift and affected the lateral overjet. Reversing the curve of Spee led to intrusion of incisors and second molars, extrusion of premolars and first molars and pronounced first and third order effects. CONCLUSION: The digital typodont system is a promising teaching tool. The tested activations have implications in three dimensions, which should be considered when planning tooth movements.

Patient-centred care attitudes and knowledge: a national study of BDS students in New Zealand.

OBJECTIVE: The aim of this study was to investigate the attitudes and knowledge towards patient-centred care among Bachelor of Dental Surgery (BDS) students in New Zealand. METHOD: The study was a mixed methods cross-sectional national study of the BDS students in New Zealand. All 2021 BDS students at the New Zealand's National Centre for Dentistry, New Zealand, were recruited in the study. The Patient-Practitioner Orientation Scale (PPOS) questionnaire was used to evaluate the dental students' attitudes and knowledge of patient centred care. The students' perspectives on the BDS curriculum regarding patient-centred care were also collected. ANOVA and the Student's T-test were used to compare the difference among the BDS years, gender, and background. RESULTS: A total of N = 277 (277/346; 80% response rate) students completed the study. Female students had higher scores than male students for sharing (difference = 0.19, 95% CI 0.04-0.34, P = 0.01), caring (difference = 0.15, 95% CI 0.01-0.29, P = 0.03) and PPOS (difference = 0.17, 95% CI 0.05-0.30, P < 0.01). Domestic students had higher scores than international students for caring (difference = 0.35, 95% CI 0.21-0.50, P < 0.01) and PPOS (difference = 0.22, 95% CI 0.08-0.35, P < 0.01). Three main themes of patient-centred care were extracted from the qualitative analysis of students' perspectives: (1) Understanding of the concept of patient-centred care, (2) Perception of the importance of patient-centred care in dentistry, and (3) Perspective on the curriculum about patient-centred care. CONCLUSION: Most dental students favoured a patient-centred approach. According to dental students, the patient-centred care component of their education should be increased.

An orthodontic tooth brushing technique to enhance oral hygiene in patients wearing fixed orthodontic appliances: A randomized controlled trial.

BACKGROUND: An effective tooth brushing technique is essential in maintaining oral hygiene, especially for patients wearing fixed orthodontic appliances. Traditional tooth brushing techniques are mainly designed for the general population without orthodontic appliances, which may not account for the oral condition of orthodontic patients due to the increased biofilm formation. The aim of this study was to design an orthodontic tooth brushing technique and compare its effectiveness with the traditional modified Bass technique. METHODS: Sixty patients wearing fixed orthodontic appliances were included in this two-arm paralleling randomized controlled trial. Thirty patients were assigned to the modified Bass technique group and 30 patients were assigned to the orthodontic tooth brushing technique group. The orthodontic tooth brushing technique involved a biting motion on the head of toothbrush in order to place the toothbrush bristles behind the archwires and around the brackets. Plaque index (PI) and gingival index (GI) were used to assess oral hygiene. Outcome measurements were taken at baseline and 1 month after the intervention. RESULTS: The new orthodontic tooth brushing technique significantly reduced PI (average PI reduction = 0.42 ± 0.13), especially in the gingival (0.53 ± 0.15) and interproximal (0.52 ± 0.18) areas (p < 0.05 for all). No significant reduction was found for the GI (p > 0.05 for all). CONCLUSION: The new orthodontic tooth brushing technique showed a promising result in reducing PI in patients wearing fixed orthodontic appliances.

Cationic Conjugated Polyelectrolytes with Aggregation-Induced Ratiometric Fluorescence.

The molecular diversity of aggregation-induced emission remains a challenge due to the limitation of conventional synthesis methods. Here, a series of novel neutral and cationic conjugated polymers composed of various ratios of tetraarylethylene (TAE) containing a bridged oxygen (O) and fluorene (F) units is designed and synthesized via the geminal cross-coupling (GCC) of 1,1-dibromoolefins. The incorporation of TAE segments into the conjugated backbone of polyfluorene produces pronounced aggregation-induced ratiometric fluorescence, i.e., aggregation-induced emission (AIE) at 520-600 nm and grows synergistically with aggregations-caused quenching (ACQ) at 400-450 nm. The content of fluorene unit in the polymer backbones determines the intensity of the initial fluorescence in the blue light region. The huge distinction (about 150 nm) in dual emission wavelengths caused by the environment change makes these conjugated polyelectrolytes particularly suitable for ratiometric fluorescence sensing. Based on electrostatic interaction mechanism, the gradual addition of heparin into the cationic conjugated polymers aqueous solutions can induce dual-color fluorescence changes with a detection limit of 9 × 10-9 m. This work exhibits the great facility of using GCC reaction to synthesis the conjugated TAE polymers with superior AIE properties and special functions.

Early versus the traditional start of oral intake following esophagectomy for esophageal cancer: a systematic review and meta-analysis.

BACKGROUND: Nil by mouth is considered the standard of care during the first days following esophagectomy. However, with the routine implementation of enhanced recovery after surgery, early oral intake is more likely to be the preferred mode of nutrition following esophagectomy. The present study aims to evaluate the safety and effectiveness of early oral intake following esophagectomy for esophageal cancer. METHODS: Comprehensive literature searches were conducted using PubMed, Web of Science, Embase, and Cochrane Library. Weighted mean differences (WMD) and odds ratios (OR) with 95% confidence intervals (CI) were calculated as the effect sizes for continuous and dichotomous variables, respectively. RESULTS: Fourteen studies with a total of 1947 patients were included. Length of hospital stay (WMD = - 3.94, CI: - 4.98 to - 2.90; P < 0.001), the time to first flatus (WMD = - 1.13, CI: - 1.25 to - 1.01; P < 0.001) and defecation (WMD = - 1.26, CI: - 1.82 to - 0.71; P < 0.001) favored the early oral intake group. There was no statistically significant difference in mortality (OR = 1.23, CI: 0.45 to 3.36; P = 0.69). Early oral intake also did not increase the risk of pneumonia and overall postoperative complications. CONCLUSIONS: Current evidence indicates early oral intake following esophagectomy seems to be safe and effective. It may be the preferred mode of nutrition following esophagectomy. However, more high-quality studies are still needed to further validate this conclusion.

Fucoidan-derived carbon dots against Enterococcus faecalis biofilm and infected dentinal tubules for the treatment of persistent endodontic infections.

Enterococcus faecalis (E. faecalis) biofilm-associated persistent endodontic infections (PEIs) are one of the most common tooth lesions, causing chronic periapical periodontitis, root resorption, and even tooth loss. Clinical root canal disinfectants have the risk of damaging soft tissues (e.g., mucosa and tongue) and teeth in the oral cavity, unsatisfactory to the therapy of PEIs. Nanomaterials with remarkable antibacterial properties and good biocompatibility have been developed as a promising strategy for removing pathogenic bacteria and related biofilm. Herein, carbon dots (CDs) derived from fucoidan (FD) are prepared through a one-pot hydrothermal method for the treatment of PEIs. The prepared FDCDs (7.15 nm) with sulfate groups and fluorescence property are well dispersed and stable in water. Further, it is found that in vitro FDCDs display excellent inhibiting effects on E. faecalis and its biofilm by inducing the formation of intracellular and extracellular reactive oxygen species and altering bacterial permeability. Importantly, the FDCDs penetrated the root canals and dentinal tubules, removing located E. faecalis biofilm. Moreover, the cellular assays show that the developed FDCDs have satisfactory cytocompatibility and promote macrophage recruitment. Thus, the developed FDCDs hold great potential for the management of PEIs.

The effect of ligation methods on biofilm formation in patients undergoing multi-bracketed fixed orthodontic therapy - A systematic review.

BACKGROUND: Many modifications to fixed orthodontic appliances have been introduced to manage biofilm formation. The aim of this review was to investigate elastomeric ligation in comparison with stainless steel ligation and self-ligation with regard to microbiological and clinical indicators of biofilm formation in patients wearing multi-bracketed fixed orthodontic appliances. METHODS: The MEDLINE and the EMBASE databases were searched up to February 2021 and supplemented by additional manual searches of bibliographies. Parallel-group and split-mouth randomized controlled trials (RCTs) comparing different ligation methods were identified. The Cochrane Risk of Bias-2 tool was applied to assess the quality of evidence. RESULTS: A total of 11 RCTs were included in this review. Nine RCTs compared self-ligation and elastomeric ligation; two compared elastomeric ligation and stainless steel ligation. The included studies had either some concerns or were at a high risk of bias. Qualitative assessment of the studies identified that there were no significant differences in biofilm formation between elastomeric ligation and self-ligation, but that stainless steel ligation was less susceptible to biofilm formation than elastomeric ligation. CONCLUSIONS: There were no significant differences between self-ligation and elastomeric ligation for biofilm formation in patients wearing multi-bracketed fixed orthodontic appliances. Stainless steel ligation may accumulate less biofilm than elastomeric ligation; however, the clinical significance of the difference could not be evaluated. Further high-quality studies are required in order to determine which ligation method is better for managing biofilm formation in patients wearing multi-bracketed fixed orthodontic appliances.

Traction of impacted and stacked maxillary anterior teeth with precise biomechanics followed by torque control using gate spring.

Impaction of multiple maxillary anterior teeth is a rare condition; when it occurs, it impacts the patient's chewing function and smile esthetics, and it has always been problematic for clinicians. This case report presents an 11-year-old girl with impaction of 3 adjacent maxillary anterior teeth, including labiopalatally oriented maxillary right central and lateral incisors and a mesially inclined maxillary right canine. These 3 impacted and stacked teeth were sequentially aligned after surgical exposure and orthodontic traction, and the surrounding dentigerous cyst healed simultaneously. Precise and delicate biomechanics will control root movement and prevent root collision. Gate spring, a novel torquing auxiliary, was used for highly efficient root torque movements of the previously impacted incisors. After 32-month treatment, the patient's occlusion and esthetics greatly improved.

Biomechanical properties of the lips in a pre-orthodontic sample of adolescents and young adults.

OBJECTIVES: To assess biomechanical properties of the lip muscles and to investigate their relationship with sex, age, body mass index (BMI), and cephalometric variables. MATERIALS AND METHODS: Demographic information and BMI were collected from 83 study participants seeking orthodontic treatment at the University of Otago. Tone, stiffness, and elasticity of the lip muscles were measured thrice at four different anatomical sites using a digital palpation device. To estimate method error, a duplicate set of measurements in a subsample of 20 participants was taken a week later. Sagittal and vertical cephalometric classifications were based on ANB and FMPA angles, respectively. Data were analysed using mixed models. RESULTS: Biomechanical properties of lip muscles were remarkably consistent both within and between different recording sessions. The lower lip had higher tone and stiffness than the upper lip. Both the upper and lower lip stiffness and tone were higher in females than in males, whereas upper lip elasticity was higher in males. Thinner upper lips had higher tone and were stiffer than thicker upper lips, whereas thinner lower lips were less elastic than thicker lower lips. Muscle tone and stiffness of both the upper and lower lips were lower in Class III than in Class I and Class II individuals. The upper lip of hyperdivergent individuals was less elastic than that of normodivergent and hypodivergent individuals, and stiffer than that of hypodivergent individuals. CONCLUSIONS: The biomechanical properties of perioral soft tissues can be reliably measured and vary with anatomical site, sex, and cephalometric measurements.

Prevalence of halitosis among young adults in Dunedin, New Zealand.

OBJECTIVES: To investigate the prevalence of halitosis in young adults. METHODS: Young adults (n = 372; mean age = 21.0 ± 2.6 years old, range = 18-30 years) in Dunedin, New Zealand, were recruited into the cross sectional study after providing informed consent. The prevalence of halitosis was determined using both objective measurements (parts per billion [ppb] volatile sulphur compounds [VSCs] in the exhaled air) and subjective measurements (self-reported halitosis questionnaire, tongue coating index, and organoleptic assessment). RESULTS: Volatile sulphur compounds measurements indicated that the prevalence of halitosis (values ≥140 ppb) was 31.2%; 25.6% of participants self-reported halitosis. The organoleptic assessment revealed that 14.3% of the participants had a score of ≥2. A positive correlation was found between the VSC measurements and organoleptic assessment (p < 0.05). No significant relationship was found between self-reported halitosis and either organoleptic assessment or VSC measurements. Self-reported dry mouth, smoking, oral hygiene index, DMFT index, and tongue coating score were significantly associated with the organoleptic assessment (p < 0.05). The self-reported dry mouth, mouth breathing and tongue coating score were significantly associated with the VSC scores (p < 0.05). CONCLUSION: Halitosis, as represented by VSC, was found in 31.2% of the participants. VSC scores and organoleptic assessment were positively correlated. There was no significant relationship between self-reported halitosis and either organoleptic assessment or VSC measurements.

Osteopenic effects of high-fat diet-induced obesity on mechanically induced alveolar bone remodeling.

OBJECTIVES: The aim of the study was to investigate the effect of obesity on the tissue and molecular reactions of alveolar bone in response to orthodontic force and its underlying mechanisms. METHODS: Sixty-four rats were randomly divided into normal diet (ND) and high-fat diet (HFD) groups for eight weeks of dietary treatment. OTM was induced using nickel-titanium springs between the upper left first molar and incisor. After 1, 3, 7, and 14 days of OTM, the maxillary alveolar bone and gingival tissues were harvested and analyzed. RESULTS: Compared with the ND rats, the HFD rats had greater OTM distance, serum levels of tartrate-resistant acid phosphatase (TRAP), and tumor necrosis factor α (TNF-α), as well as significant alveolar bone loss and bone architecture deterioration on both the compression and tension sides (p < .05 for all). This response was linked to the increased osteoclast numbers and functional activity and decreased osteoblast activity in the periodontal ligament, gingival tissue, and alveolar bone. CONCLUSIONS: HFD-induced obesity promoted mechanically induced alveolar bone remodeling and detrimental changes in alveolar bone microstructure by increasing osteoclastogenesis and regulating inflammatory cytokine expression. The increased alveolar bone remodeling in the obese rats lead to an accelerated OTM.

Use of traditional medicine for dental care by different ethnic groups in New Zealand.

BACKGROUND: There is an increasing public interest in the use of TM internationally, yet there is a paucity of research on the use of TM by the public in the dental setting. This study aimed to explore the views, use of and access to TM in dentistry among different ethnic groups residing in New Zealand. METHODS: Qualitative study and in-depth interviews were used. An individual semi-structured questionnaire was used to collect data. Interviews were recorded, transcribed, and analysed using an inductive approach to identify the main themes. RESULTS: Three main themes were extracted from interviews with 14 participants from diverse cultural backgrounds: [1] the perspectives of TM varied among different ethnic groups and included the involvement of spirituality, the environment, knowledge and usage of TM. [2] The TM that was used by different ethnic groups included plants, herbs, massage, and other forms of healing. Reasons for choosing traditional or western medicines generally included family tradition, access to TM, and finding a competent traditional healer. [3] The barriers in accessing TM included the paucity of traditional healers, difficulty accessing plants and cost, therefore most would look for a substitution or alternative treatment. CONCLUSION: Even though the access to these TM in New Zealand was a challenge for the majority of the participants, they are still considered the first-line treatment for the majority. This study provided dental practitioners an insight into the different sort of TM used by the population. By understanding and acknowledging the use of TM, dental practitioners could create a supportive environment for patients to disclose their use of TM and allow them to educate patients on the use of TM.

Orthodontic incisor retraction caused changes in the soft tissue chin area: a retrospective study.

BACKGROUND: To investigate the area and morphological changes around the soft tissue chin after orthodontic incisor retraction. METHODS: Fifty-nine female adults with bimaxillary protrusion requiring extraction of four premolars were included in the study. Cephalograms were taken before (T0) and after (T1) orthodontic treatment. The soft tissue changes, including the area, thickness and morphology were measured. Paired-t tests were performed for statistical comparisons. Pearson correlation analyses and backward multivariate regression analyses were used to identify the relationship between the soft tissue changes and incisor retraction. RESULTS: Following the incisor retractions (5.35 ± 1.79 mm and 4.42 ± 1.62 mm for the upper and lower, respectively), there was a significant increase in the soft tissue thickness of L1c-LL (0.64 ± 1.67 mm, P = 0.025) and Pog-Pog' (0.44 ± 1.10 mm, P = 0.022), and a significant decrease in the soft tissue thickness of B-B' (1.21 ± 1.34 mm, P <  0.01). Changes in the area of soft tissue chin and lower lip were not statistically significant (P > 0.05). Pearson coefficient between the thickness changes of B-B' and the retraction of lower incisors was - 0.376. The multiple correlations between the soft tissue thickness changes and incisor retractions were Y = 1.02-0.42a + 0.42b for L1c-LL, and Y = 0.17-0.31b for B-B'. CONCLUSIONS: The orthodontic incisor retraction could cause soft tissue thickness changes (i.e. an increase in L1c-LL and Pog-Pog' and a decrease in B-B') without area changes.

Final year dental students' career plans, work patterns, work-life balance and domestic life in New Zealand and Australia.

INTRODUCTION: Having insight into final year dental students' career planning is vital in maintaining and enhancing the quality of dental education. The aim of this study was to investigate final year dental students' career plans, work patterns, work-life balance and domestic life, in New Zealand and Australia. METHODS: The design of the study was a two-centred cross-sectional study. RESULTS: A total of 148 students, including 95 females (64%) and 53 males (36%), completed the survey (response rate = 87%). The mean age of students across two Australasian universities was 23 ± 3 years. Findings from this study demonstrate that students prefer their first job is an urban, full-time and salary-based with a good mentor. However, when describing their long-term planning, work-life balance becomes more important. The growth in the number of female dentists will continue to shape the future patterns of our dental profession. CONCLUSION: The current study has highlighted several similarity and differences in career plans, work patterns, work-life balance and domestic life between two Australasian universities. The information might be useful for the policymakers involved in future workforce planning and infrastructure and for those involved in the delivery of dental education.

Nanoporous Semiconductor Electrode Captures the Quantum Dots: Toward Ultrasensitive Signal-On Liposomal Photoelectrochemical Immunoassay.

Liposomal photoelectrochemical (PEC) bioanalysis has recently emerged and exhibited great potential in sensitive biomolecular detection. Exploration of the facile and efficient route for advanced liposomal PEC bioanalysis is highly appealing. In this work, we report the split-type liposomal PEC immunoassay system consisting of sandwich immunorecognition, CdS quantum dots (QDs)-loaded liposomes (QDLL), and the release and subsequent capture of the QDs by a separated TiO2 nanotubes (NTs) electrode. The system elegantly operated upon the protein binding and lysis treatment of CdS QDLL labels within the 96-well plate, and then the CdS QDs-enabled sensitization of TiO2 NTs electrode. Exemplified by cardiac markers troponin I (cTnI) as target, the proposed system achieved efficient activation of TiO2 NTs electrode and thus the signal generation toward the split-type PEC immunoassay. This work features the first use of QDs for liposomal PEC bioanalysis and is expected to inspire more interests in the design and implementation of numerous QDs-involved liposomal PEC bioanalysis.

Liposome-Mediated in Situ Formation of AgI/Ag/BiOI Z-Scheme Heterojunction on Foamed Nickel Electrode: A Proof-of-Concept Study for Cathodic Liposomal Photoelectrochemical Bioanalysis.

This work reports the liposome-mediated in situ formation of the AgI/Ag/BiOI Z-scheme heterojunction on foamed nickel electrode for signal-on cathodic photoelectrochemical (PEC) bioanalysis. Specifically, in a proof-of-concept study, Ag nanoparticle-encapsulated liposomes were initially confined via the sandwich immunobinding and then processed to release numerous Ag+ ions, which were then directed to react with the BiOI/Ni electrode, resulting in the in situ generation of a AgI/Ag/BiOI Z-scheme heterojunction on the electrode. The enhanced cathodic signal could be correlated to the target concentration, which thus underlays a novel signal-on cathodic liposomal PEC bioanalysis strategy. Different from previous anodic liposomal PEC bioanalysis, this work features the first cathodic liposomal PEC bioanalysis on the basis of the in situ formation of a Z-scheme heterojunction. More generally, integrated with various biorecognition events, this protocol could serve as a common basis for addressing numerous targets of interest.

A novel approach of torque control for maxillary displaced incisors.

Effective torque control is crucial for the successful treatment of impacted incisors; however, torque control is often a challenge with the use of conventional bracket systems, especially when the adjacent teeth require opposite torque managements. A novel approach of torque control for adjacent anterior teeth is introduced in this case report. A 12-year-old boy had an impacted maxillary right central incisor with the adjacent teeth severely displaced. The treatment plan was to regain space and pull the impacted incisor into the dentition. An upper removable appliance was first used to regain space for the impacted central incisor, followed by a spontaneous eruption of the impacted incisor. Subsequently, fixed appliances were bonded to level and align the dentition. However, the crown of the maxillary right central incisor was found to be tipped lingually, while the maxillary right lateral incisor was tipped labially. Traditional torque control, including torque bend and the use of a Warren spring, were first used for the correction, but they were ineffective due to the overlap of the root apex of the maxillary central incisor and lateral incisor. After the roots were separated with a V-shaped curve, auxiliary brackets were bonded on the gingival one-third areas of the maxillary incisors and canine with nickel-titanium wires used for the torque control. This approach of using the auxiliary brackets and wires was demonstrated to be efficient and effective in the torque control of adjacent anterior teeth with opposite torque control requirements. The final result and the 2-year follow-up records demonstrated the proper torque of anterior teeth and good and stable dental and profile esthetics.