Comparative assessment of orthodontic clear aligner versus fixed appliance for anterior retraction: a finite element study.

BACKGROUND: The aim of this study is to conduct a comparative evaluation of different designs of clear aligners and examine the disparities between clear aligners and fixed appliances. METHODS: 3D digital models were created, consisting of a maxillary dentition without first premolars, maxilla, periodontal ligaments, attachments, micro-implant, 3D printed lingual retractor, brackets, archwire and clear aligner. The study involved the creation of five design models for clear aligner maxillary anterior internal retraction and one design model for fixed appliance maxillary anterior internal retraction, which were subsequently subjected to finite element analysis. These design models included: (1) Model C0 Control, (2) Model C1 Posterior Micro-implant, (3) Model C2 Anterior Micro-implant, (4) Model C3 Palatal Plate, (5) Model C4 Lingual Retractor, and (6) Model F0 Fixed Appliance. RESULTS: In the clear aligner models, a consistent pattern of tooth movement was observed. Notably, among all tested models, the modified clear aligner Model C3 exhibited the smallest differences in sagittal displacement of the crown-root of the central incisor, vertical displacement of the central incisor, sagittal displacement of the second premolar and second molar, as well as vertical displacement of posterior teeth. However, distinct variations in tooth movement trends were observed between the clear aligner models and the fixed appliance model. Furthermore, compared to the fixed appliance model, significant increases in tooth displacement were achieved with the use of clear aligner models. CONCLUSIONS: In the clear aligner models, the movement trend of the teeth remained consistent, but there were variations in the amount of tooth displacement. Overall, the Model C3 exhibited better torque control and provided greater protection for posterior anchorage teeth compared to the other four clear aligner models. On the other hand, the fixed appliance model provides superior anterior torque control and better protection of the posterior anchorage teeth compared to clear aligner models. The clear aligner approach and the fixed appliance approach still exhibit a disparity; nevertheless, this study offers a developmental direction and establishes a theoretical foundation for future non-invasive, aesthetically pleasing, comfortable, and efficient modalities of clear aligner treatment.

The effects of lingual buttons, precision cuts, and patient-specific attachments during maxillary molar distalization with clear aligners: Comparison of finite element analysis.

INTRODUCTION: This study aimed to analyze the biomechanical effects of the combined use of clear aligners (CA) and auxiliaries (precision cuts, lingual buttons, and patient-specific attachments) on mesial tipping and extrusion of the premolars during maxillary molars distalization. METHODS: Three-dimensional finite element method was employed to simulate clinical scenarios of CA with different auxiliaries for molar distalization. As such, 200 g of distal force was applied to the microimplants from the notches, lingual buttons, and hooks. Orthodontic tooth movement and the hydrostatic pressure in the periodontal ligament were compared. RESULTS: Adding auxiliaries can provide the maxillary arch anchorage and promote the distal tipping of premolars and retroclination of maxillary incisors. In contrast, this effect was more pronounced in patient-specific attachment applications than in other types of auxiliaries. The independent application of the CA caused mesial tipping and extrusion of the premolar and also caused the incisor proclination. CONCLUSIONS: The anchorage loss caused by the CA alone could be alleviated with the assistance of auxiliaries. Notably, patient-specific attachments further reinforce the anchorage of the anterior arch by incorporating anchor teeth as 1 anchorage unit.

Effects of different designs of orthodontic clear aligners on the maxillary central incisors in the tooth extraction cases: a biomechanical study.

BACKGROUND: Controlling the 3D movement of central incisors during tooth extraction cases with clear aligners is important but challenging in invisible orthodontic treatment. This study aimed to explore the biomechanical effects of central incisors in tooth extraction cases with clear aligners under different power ridge design schemes and propose appropriate advice for orthodontic clinic. METHODS: A series of Finite Element models was constructed to simulate anterior teeth retraction or no retraction with different power ridge designs. These models all consisted of maxillary dentition with extracted first premolars, alveolar bone, periodontal ligaments and clear aligner. And the biomechanical effects were analysed and compared in each model. RESULTS: For the model of anterior teeth retraction without power ridge and for the model of anterior teeth no retraction with a single power ridge, the central incisors exhibited crown lingual inclination and relative extrusion. For the model of anterior teeth no retraction with double power ridges, the central incisors tended to have crown labial inclination and relative intrusion. For the model of anterior tooth retraction with double power ridges, the central incisors exhibited a similar trend to the first kind of model, but as the depth of the power ridge increased, there was a gradual decrease in crown retraction value and an increase in crown extrusion value. The simulated results showed that von-Mises stress concentration was observed in the cervical and apical regions of the periodontal ligaments of the central incisors. The clear aligner connection areas of adjacent teeth and power ridge areas also exhibited von-Mises stress concentration and the addition of power ridge caused the clear aligner to spread out on the labial and lingual sides. CONCLUSIONS: The central incisors are prone to losing torque and extruding in tooth extraction cases. Double power ridges have a certain root torque effect when there are no auxiliary designs, but they still cannot rescue tooth inclination during tooth retraction period. For tooth translation, it may be a better clinical procedure to change the one-step aligner design to two-step process: tilting retraction and root control.

Influence of bone morphology on the mechanobiological stimuli distribution of maxillary anterior labial bone: A biomechanical study.

OBJECTIVE: This study intended to ascertain the dimensional effects of labial bone thickness and height on the mechanobiological stimuli distribution of maxillary anterior labial bone through biomechanical analysis. MATERIAL AND METHODS: Twelve 3D finite element models of an anterior maxillary region with an implant were computer-simulated, including four levels of labial bone thicknesses (2, 1.5, 1.0, and 0.5 mm) and three levels of labial bone heights (normal, reduced by 1/3, reduced by 1/2). A 45° buccolingual oblique load of 100 N was applied to the implant restoration. RESULTS: Equivalent stress and principal strain mainly concentrated on crestal bone around the implant neck. The maximum equivalent stress in bone decreased as labial bone mass decreased, while the maximum principal strain and the displacement of dental implant increased as labial bone mass decreased. No significant difference of these three indicators was observed, when the labial bone thickness changed in the range of 2.0-1.0 mm with sufficient labial bone height. CONCLUSIONS: In terms of biomechanics, the thickness of labial bone plate was recommended ≥1 mm. Sufficient labial bone height was warranted to prevent the stability of the implants from being seriously affected. The labial bone heights were more effective than thicknesses on the mechanobiological stimuli response of the dental implant-bone system. CLINICAL SIGNIFICANCE: For this 3D finite element study, the biomechanical responses under different bone mass conditions were explored, in order to predict the process of bone remodeling and provide valid clinical recommendations for the decision-making process regarding the choices of tissue augmentation for some specific esthetic implantation cases for future clinical applications.

Ratio-fluorescence detection of tert-butylhydroquinone based on non-conjugated polymer dots and gold nanoclusters.

A novel ratiometric fluorescent probe based on non-conjugated polymer dots (NCPDs) and gold nanocluster (AuNCs) was constructed to determine tert-butylhydroquinone (TBHQ). The probe exhibited dual emission peaks at 480 nm and 630 nm under 370 nm excitation. The fluorescence of AuNCs was quenched by TBHQ due to strong electrostatic interactions, whereas the emission of NCPDs increased. The ratio of fluorescence intensity at 480 nm to 630 nm (F480 / F630) was monitored as analytical signal response. The probe have been utilized for the detection of TBHQ with good linear relationship in the range of 0.2 to 60 µg/mL. The limit of detection (LOD) and the limit of quantitation (LOQ) were 0.048 µg/mL and 0.159 µg/L, respectively. Three levels of spiked-in TBHQ concentrations were obtained with recovery rates from 80 % to 102 %. The present study provided an effective ratiometric fluorescence method for selective screening of TBHQ in food samples.

Effects of different tooth movement patterns and aligner thicknesses on maxillary arch expansion with clear aligners: a three-dimensional finite element study.

Objectives: The objective of this study was to investigate the biomechanical effects of different tooth movement patterns and aligner thicknesses on teeth and periodontal tissues during maxillary arch expansion with clear aligners, to facilitate more precise and efficient clinical orthodontic treatments. Methods: Three-dimensional models including teeth, maxilla, periodontal ligament, and aligner were constructed and subjected to finite element analysis. Tooth displacement trends and periodontal ligament stresses were measured for seven tooth displacement patterns (divided into three categories including overall movement of premolars and molars with gradually increasing molar expansion in each step; distributed movement of premolars and molars; and alternating movement between premolars and molars at intervals) and two aligner thicknesses (0.5 mm and 0.75 mm) during maxillary arch expansion with clear aligners. Results: When expanding the maxillary arch with clear aligners, the effective expansion of the target teeth mainly showed a tilting movement trend. Increasing the amount of molar expansion increased the buccal displacement of the first molar but decreased the buccal displacement of the premolars. The mean buccal displacement of the target teeth was greater in the posterior teeth interval alternating movement group (0.026 mm) than in the premolar/molar distributed movement group (0.016 mm) and the overall movement group (0.015 mm). Increasing aligner thickness resulted in greater buccal displacement of the crowns and increased stress on the periodontal ligaments. Conclusion: Increasing the amount of molar expansion reduces the efficiency of premolar expansion. Alternating movement of premolars and molars at intervals achieves a higher arch expansion efficiency, but attention should be paid to the anchorage of adjacent teeth. Increasing the thickness of the aligner increases the expansion efficiency but may also increase the burden on the periodontal tissues.

Improvements of tooth movement efficiency and torque control in expanding the arch with clear aligners: a finite element analysis.

Objectives: The purpose of this study was to analyze the effect of different movement strategies, embossment structures, and torque compensation of the aligner on tooth movement during arch expansion using clear aligners by finite element analysis. Methods: Models comprising the maxilla, dentition, periodontal ligament, and aligners were created and imported into a finite element analysis software. The tests were performed using the following: three orders of tooth movement (including alternating movement with the first premolar and first molar, whole movement with second premolar and first molar or premolars and first molar), four different shapes of embossment structures (ball, double ball, cuboid, cylinder, with 0.05, 0.1, 0.15-mm interference) and torque compensation (0°, 1°, 2°, 3°, 4°, and 5°). Results: The expansion of clear aligners caused the target tooth to move obliquely. Alternating movement resulted in higher movement efficiency with lower anchorage loss as compared with whole movement. Embossment increased the efficiency of crown movement but did not contribute positively to torque control. As the angle of compensation increased, the tendency of oblique tooth movement was gradually controlled; however, the movement efficiency decreased concurrently, and stress distribution on the periodontal ligament became more even. For each 1° increase in compensation, the torque per millimeter of the first premolar would decrease by 0.26°/mm, and the crown movement efficiency eliminate decreased by 4.32%. Conclusion: Alternating movement increases the efficiency of the arch expansion by the aligner and reduces anchorage loss. Torque compensation should be designed to enhance torque control in arch expansion using an aligner.

Efficacy of various multi-layers of orthodontic clear aligners: a simulated study.

BACKGROUND: In the invisible orthodontic treatment, composite thermoforming film materials have become the focus of orthodontic clear aligners. The orthodontic efficacy of clear aligners which consisted of multi-layers materials remains unclear. This study aims to evaluate the biomechanical effects of various multi-layers of clear aligners on en-mass retraction of maxillary anterior teeth. METHODS: A patient-specific 3D non-linear finite element model numerical analysis was constructed to simulate the en-mass retraction of maxillary anterior teeth with clear aligner after extraction of the first premolars. Four kinds of multi-layers clear aligners with different proportion of film materials were simulated. The biomechanical responses of four different clear aligners on invisible orthodontics were calculated. The tooth displacement in all directions, the hydrostatic pressure of periodontal ligament, the orthodontic deformation of clear aligner, and the stress distribution of alveolar bone were compared and investigated. RESULTS: In all experimental models, the maximum equivalent deformation of alveolar bone, the vector displacement of tooth and the compressive/tensile stress of periodontal ligament decreased with the increase of soft layer thickness. The elastic strain of clear aligners also decreased with the increase of the ratio of soft/hard layers. CONCLUSIONS: The multi-layers clear aligner is better than the single-layer clear aligner in tooth movement, stress distribution of periodontal ligament and mechanical loading of alveolar bone, especially when the ratio of soft layer to hard layer is more than 50%. Moreover, the side effects of the multi-layers clear aligner are significantly less than those of the single-layer one.

Assessment of Customized Alveolar Bone Augmentation Using Titanium Scaffolds vs Polyetheretherketone (PEEK) Scaffolds: A Comparative Study Based on 3D Printing Technology.

Customized alveolar bone augmentation provides sufficient and precisely regenerated bone tissue for subsequent dental implant placement. Although some clinical cases have confirmed the successful use of the patient-specific polyetheretherketone (PEEK) scaffolds, the biomechanical property and osteogenic performance of the patient-specific PEEK scaffolds remain unclear. The objectives of this study were (1) to evaluate the space maintenance capacity and osteogenic performance of the patient-specific PEEK scaffolds for customized alveolar bone augmentation and (2) to compare the biomechanical properties of three-dimensionally printed titanium scaffolds and PEEK scaffolds. Both titanium scaffolds and PEEK scaffolds were designed and manufactured via additive manufacturing technology combined with computer-aided design (CAD). In three-point bending tests, the bending strength of the PEEK scaffold was about 1/3 that of the titanium scaffold. Accordingly, the equivalent strain value of the internal bone graft beneath the PEEK scaffold was about 3 times that beneath the titanium scaffold in finite element analysis, but the maximum deformations of both scaffolds were less than 0.05 mm. Meanwhile, in in vivo experiments, it is demonstrated that both scaffolds have similar space maintenance capacity and bone ingrowth efficiency. In conclusion, patient-specific PEEK scaffolds showed significantly lower biomechanical strength but comparable space maintenance and osteogenic properties to the titanium counterpart. Compared with traditional guided bone regeneration (GBR) surgery, both patient-specific PEEK and titanium scaffolds can achieve excellent osteogenic space maintenance ability. This study provides a preliminary basis for the clinical translation of the nonmetallic barrier membrane in customized alveolar bone augmentation.

Assessment of labially impacted canines traction mode with clear aligners vs. fixed appliance: A comparative study based on 3D finite element analysis.

Purpose: The objective of this study was to evaluate and compare the biomechanical differences between clear aligner and fixed appliance in the traction of labially impacted canines based on 3D finite element analysis. Methods: A series of patient-oriented finite element models were constructed, including a maxillary dentition with a right labially canine, maxilla, periodontal ligaments, traction attachments, and clear aligners. The two most common clinical scenarios were investigated: Scenario A: impacted canine (distal) and Scenario B: impacted canine (mesial). For each clinical scenario, three traction models with clear aligners and one fixed appliance model were established. Results: In all four models, the impacted canines exhibited similar initial displacement tendencies of mesially rotated in Scenario A and distally rotated in Scenario B, and with small differences in periodontal ligament stress magnitude. However, the sum of the periodontal ligament stresses of the anchorage teeth in the clear aligner mode was in the range of 56.28-76.21 kPa and in the fixed appliance mode was in the range of 6.61-7.22 kPa. The maximum value of initial displacement of the anchorage teeth in the clear aligner mode was in the range of 13.71-19.72 µm, while in the fixed appliance mode was 3.10-3.92 µm. Conclusion: For impacted canines, clear aligner mode and fixed appliance mode have little difference in biomechanical effect. However, the anchorage teeth in the clear aligner mode endure higher stress and show a more pronounced displacement tendency. In addition, the biomechanical effects of different clear aligner traction models are various but not obvious.

Comparison of the biomechanical differences in the occlusal movement of wild-type and BMP9 knockout mice with apical periodontitis.

Apical periodontitis is a common clinical disease caused by bacteria; bacterial metabolites can cause an imbalance in bone homeostasis, bone mass reduction, and tooth loss. Bone resorption in apical periodontitis causes a concentration of stress in the tooth and periodontal tissues during occlusion, which aggravates the disease. Emerging evidence indicates that bone morphogenetic protein 9 (BMP9), also known as growth differentiation factor 2(Gdf2), may play an important role in tooth and dentoalveolar development. Herein, we investigated the role of BMP9 in the development of apical periodontitis and its effects on the biomechanics of dentoalveolar bone. Apical periodontitis models were established in five BMP9 knockout (KO) mice and five C57BL/6 WT (wild-type) mice. At baseline and 14, 28, and 42 days after modeling, in vivo micro-computed tomography analysis and three-dimensional (3D) reconstruction were performed to evaluate the apical lesion in each mouse, and confirm that the animal models were successfully established. Finite element analysis (FEA) was performed to study the stress and strain at the alveolar fossa of each mouse under the same vertical and lateral stress. FEA revealed that the stress and strain at the alveolar fossa of each mouse gradually concentrated on the tooth cervix. The stress and strain at the tooth cervix gradually increased with time but were decreased at day 42. Under the same lingual loading, the maximum differences of the stress and strain at the tooth root in KO mice were greater than those in WT mice. Thus, these findings demonstrate that BMP9 could affect the biomechanical response of the alveolar fossa at the tooth root in mice with apical periodontitis. Moreover, the effects of BMP9 on the biomechanical response of the alveolar bone may be site-dependent. Overall, this work contributes to an improved understanding of the pathogenesis of apical periodontitis and may inform the development of new treatment strategies for apical periodontitis.

Biomechanical analysis of reinstating buccally flared maxillary 2nd molars using 3D printing anchorage supports: a 3D finite element study.

The buccally flared maxillary 2nd molar has certain consequences on oral function and health. However, existing methods have some degree of disadvantages, such as invasion, complexity and side effects. The objectives of this study were to design anchorage systems to correct buccally flared maxillary 2nd molars and analyze their biomechanical effects by 3-dimensional (3D) finite element analysis. Finite element (FE) models of the 3D tanspalatal arches (TPAs) and 3D splints with different thicknesses and force points were constructed. The stress distribution on teeth, the hydrostatic pressure on periodontal ligaments and the initial displacement of teeth were analyzed. A total of 18 FE models were constructed and analyzed. The stress concentrated on a single anchorage tooth, and the hydrostatic pressure and initial displacement of the anchorage tooth were greater than those of the malposed 2nd molar in the 3D splint anchorage system. The stress spread on all anchorage teeth and the hydrostatic pressure and initial displacement of the anchorage tooth were less than those of the malposed 2nd molar in the 3D TPA anchorage system. Theoretically, the 3D TPA was better than the 3D splint as an anchorage to correct the buccally flared 2nd molar. A combination of 0.8 mm of thickness and mesial force point provided the optimal conditions for the 3D TPA. Further clinical studies should be conducted to verify the effects of 3D appliances.

Biomechanical Analysis of Various Reconstructive Methods for the Mandibular Body and Ramus Defect Using a Free Vascularized Fibula Flap.

Several different methods exist for reconstructing the mandibular body and ramus defect with the use of a free vascularized fibula flap, but none have adequately addressed the long-term mechanical stability and osseointegration. The aim of this study is to compare the biomechanics of different surgical methods and to investigate the best approach for reconstructing the mandibular body and ramus defect. Five finite element models based on different reconstructive methods were simulated. Stress, strain, and displacement of connective bone sections were calculated for five models and compared. The models were printed using a 3D printer, and stiffness was measured using an electromechanical universal testing machine. The postoperative follow-up cone beam computed tomography (CBCT) was taken at different time points to analyze bone mineral density of connective bone sections. The results showed that the "double up" (DU) model was the most efficient for reconstructing a mandibular body and ramus defect by comparing the mechanical distribution of three sections under vertical and inclined loading conditions of 100 N. The stiffness detection showed that stiffness in the DU and "double down" (DD) models was higher compared with the "single up" (SU), "single down" (SD), and "distraction osteogenesis" (DO) models. We used the DU model for the surgery, and postoperative follow-up CBCT showed that bone mineral density of each fibular connective section increased gradually with time, plateauing at 12 weeks. We conclude that a free vascularized fibula flap of the DU type was the best approach for the reconstruction of the mandibular body and ramus defect. Preoperative finite element analysis and stiffness testing were shown to be very useful for maxillofacial reconstruction.

Mechanobiologically optimization of a 3D titanium-mesh implant for mandibular large defect: A simulated study.

Recently, a novel 3D titanium-mesh scaffold with bone grafting material has been proposed to reconstruct the large defect of mandible. However, how to design and optimize the 3D scaffolds of mandible is still unclear. Therefore, the aim of this study was to investigate the optimization of 3D scaffolds for mandibular defect. Both the biomechanical behavior and mechanobiological property of scaffolds were considered in this study. Four configurations (regular hexahedron, cuboctahedron, regular dodecahedron, and diamond) and three strut diameters (0.2 mm, 0.5 mm and 0.8 mm) were divided into 12 groups. By employing Finite Element Analysis and bone "Mechnostat" theory, the optimal unit cell was selected from 12 scaffolds. Then, the original implant for mandible defects was designed with the optimal unit cell, and the final implant was optimized to promote osteogenesis and avoid mechanical failure under bi-lateral chewing bite (200N) and maximum force (worse-case) bite (800 N). The results illustrated a strong correlation between the configurations and the load transmission capacity, while mechanical failure highly depended on strut size and architecture. Regular dodecahedron with a strut diameter of 0.8 mm provided a good load transfer to bone tissue while resisting the mechanical failure. Ultimately, the optimized implant was constructed with regular dodecahedron unit cell, and the strut diameters of scaffold gradually varied according to the biomechanical analysis. The computational results indicated that the optimized implant can provide an excellent mechanical environment for bone regeneration, thus achieving a long-term stability and occlusal reconstruction with dental implant. This study is expected to provide a scientific basis for the design and optimization of 3D mesh scaffolds to reconstruct a mandibular functionally and aesthetically.

[Epidemiological study and clinical analysis of 931 children with hand foot and mouth disease in Yantai].

OBJECTIVE: To discuss the epidemiological and clinical characteristics of the hospitalized children with hand foot and mouth disease (HFMD) in Yantai area. METHODS: Epidemiological and clinical data of HFMD children from 2009 to 2010 were summarized and analyzed retrospectively. RESULTS: Most of the infected (94.6%) were under 5 years old and the ratio between male and female was 1.5: 1. Oral mucosal pox or ulcer as well as hand and foot rashes were observed in all 931 patients. Fever and neurological disorders occurred in 840 (90.2%) and 121 (13.0%) patients respectively. The incidence was positively correlated with air temperature (r = 0.887, P < 0.001), with a peak in April to September (88.9%). The ratio of children from countryside, total duration of fever, serum concentration of c-reacting protein (CRP) and fasting blood glucose (FBG) were significantly higher in severe cases than in those mild ones. Multivariate analysis showed longer mean duration of fever( Odds ratio [OR], 1.491; 95% confidence interval [ CI] 1.170-1.901; P = 0.001) and hyperglycemia (OR, 1.124; 95% CI 1.016-1.245; P = 0.024) were independent risk factors of severity. CONCLUSION: Children younger than 5 years old are susceptible to HFMD and most cases occur in April to September. The monthly incidence is positively correlated with temperature of that month. Longer duration of fever and hyperglycemia are independent risk factors for severity. Most cases could have a favorable prognosis after timely diagnosis and proper intervention.