Construction of cellulose-based highly sensitive extended-gate field effect chiral sensor.

Chiral recognition is an emerging field of modern chemical analysis, and the development of health-related fields depends on the production of enantiomers. Cellulose is a kind of natural polymer material with certain chiral recognition ability. Limited by the chiral recognition ability of natural cellulose itself, more cellulose derivatives have been gradually developed for chiral recognition and separation. Based on the difference in action between cellulose derivatives and enantiomers, this work synthesized cellulose-tris(4-methylphenylcarbamate) (CMPC) chiral recognition mediators and a CMPC-functionalized extended-gate organic field effect transistor (EG-OFET) was constructed for the first time. Three chiral molecules were selected as model analytes to evaluate the enantiomeric recognition ability of the platform, including threonine (Thr), 2-chloromandelic acid (CA), and 1,2-diphenylethylenediamine (DPEA). The detection limit for 1,2-diphenylethylenediamine (DPEA) is down to 10-13 M. Through the amplification effect of the EG-OFET platform, the difference in the interaction between CMPC and three chiral molecules with different structures is converted into a current signal output. At the same time, the enantiomer discrimination mechanism of CMPC was further studied by means of spectroscopy and nuclear magnetic resonance.

[Progress in Application of Concentrated Growth Factor in Oral Tissue Regeneration].

Tissue regeneration is an important engineering method for the treatment of oral soft and hard tissue defects.Growth factors,as one of the three elements of tissue regeneration,are a necessary condition for tissue regeneration.Concentrated growth factor(CGF)is a new generation of blood extract prepared by changing the centrifugal speed on the basis of the preparation of platelet-rich plasma(PRP)and platelet-rich fibrin(PRF).It contains abundant growth factors and a fibrin matrix with a three-dimensional network structure,being capable of activating angiogenesis and promoting tissue regeneration and healing.CGF has been widely used in the repair and regeneration of oral soft and hard tissues.This paper introduces the preparation and composition of CGF and reviews the application of CGF in oral implantation and the regeneration of oral bone tissue,periodontal tissue,and dental pulp tissue.

Development of a rat model for type 2 diabetes mellitus peri-implantitis: A preliminary study.

OBJECTIVE: To develop an in vivo model to simulate the complex internal environment of diabetic peri-implantitis (T2DM-PI) model for a better understanding of peri-implantitis in type 2 diabetic patients. MATERIALS AND METHODS: Maxillary first molars were extracted in Sprague-Dawley (SD) rats, and customized cone-shaped titanium implants were installed in the extraction sites. Thereafter, implants were uncovered and customized abutments were screwed into implants. A high-fat diet and a low-dose injection of streptozotocin were utilized to induce T2DM. Finally, LPS was locally injected in implant sulcus to induce peri-implantitis. RESULTS: In the present study, T2DM-PI model has been successfully established. Imaging analysis revealed that abundant inflammatory cells infiltrated in the soft tissue in T2DM-PI group with concomitant excessive secretion of inflammatory cytokines. Moreover, higher expression of MMP and increased number of osteoclasts led to collagen disintegration and bone resorption in T2DM-PI group. CONCLUSIONS: These results describe a novel rat model which stimulate T2DM-PI in vivo, characterized by overwhelming inflammatory response and bone resorption. This model has a potential to be used for investigation of initiation, progression and interventional therapy of T2DM-PI.

Discovery of Active Ingredients Targeted TREM2 by SPR Biosensor-UPLC/MS Recognition System, and Investigating the Mechanism of Anti-Neuroinflammatory Activity on the Lignin-Amides from Datura metel Seeds.

As a new target protein for Alzheimer's disease (AD), the triggering receptor expressed on myeloid Cells 2 (TREM2) was expressed on the surface of microglia, which was shown to regulate neuroinflammation, be associated with a variety of neuropathologic, and regarded as a potential indicator for monitoring AD. In this study, a novel recognition system based on surface plasmon resonance (SPR) for the TREM2 target spot was established coupled with quadrupole time-of-flight tandem mass spectrometry (UPLC-MS), in order to screen the active ingredients targeting TREM2 from Datura metel seeds. The results showed that four lignan-amides were discovered as candidate compounds by SPR biosensor-UPLC/MS recognition analysis. According to the guidance of the active ingredients discovered by the system, the lignin-amides from Datura metel seeds (LDS) were preliminarily identified as containing 27 lignan-amides, which were enriched compositions by the HP-20 of Datura metel seeds. Meanwhile, the anti-inflammatory activity of LDS was evaluated in BV2 microglia induced by LPS. Our experimental results demonstrated that LDS could reduce NO release in LPS-treated BV2 microglia cells and significantly reduce the expression of the proteins of inducible Nitric Oxide Synthase (iNOS), cyclooxygenase 2 (COX-2), microtubule-associated protein tau (Tau), and ionized calcium-binding adapter molecule 1 (IBA-1). Accordingly, LDS might increase the expression of TREM2/DNAX-activating protein of 12 kDa (DAP12) and suppress the Toll-like receptor SX4 (TLR4) pathway and Recombinant NLR Family, Pyrin Domain Containing Protein 3 (NLRP3)/cysteinyl aspartate specific proteinase-1 (Caspase-1) inflammasome expression by LDS in LPS-induced BV2 microglial cells. Then, the inhibitory release of inflammatory factors Interleukin 1 beta (IL-1ß), Interleukin 6 (IL-6), and Tumor necrosis factor-alpha (TNFα) inflammatory cytokines were detected to inhibit neuroinflammatory responses. The present results propose that LDS has potential as an anti-neuroinflammatory agent against microglia-mediated neuroinflammatory disorders.

[A cone-beam computed tomography study on crown-root morphology of maxillary anterior teeth in Class II, division 2 malocclusion].

OBJECTIVE: To study crown-root morphology of maxillary anterior teeth in Class II, division 2 malocclusion using cone-beam CT (CBCT) combined with computer aided measurement technology to provide guidance for clinical treatment. METHODS: The samples which consisted of 36 cases radiographed with CBCT techniques were selected and divided into two groups (18 each ) based on the type of malocclusion presented: Class II, division 2 group (group II 2) and Class I group (group I). The measurements of crown-root morphology including crown-root angle and surface-shaft angle were got by Multiple Planer Reconstruction of CBCT data uploaded into InvivoDental software 5.0. The data were processed with SPSS 20.0 software package and t test was employed for comparison of angular measurements. RESULTS: In group I, crown-root angles of maxillary central incisor, maxillary lateral incisor and maxillary canines were 179.08° ± 3.31°, 176.55° ± 2.77° and 184.20° ± 2.51° respectively, surface-shaft angles were 21.00° ± 2.63°, 19.63° ±2 .35° and 19.36° ± 2.30° respectively. While in group II 2, crown-root angles of maxillary central incisor, maxillary lateral incisor and maxillary canines were 176.80° ± 2.62°, 174.13° ± 3.28° and 181.79° ± 2.88° respectively, surface-shaft angles were 23.20° ± 2.95°, 22.29° ± 2.19° and 20.61° ± 2.34° respectively. Compared with group I, significant statistical differences were observed with the exception of surface-shaft angle of maxillary incisor. There was significant difference in crown-root angle between group II 2 and 180°. CONCLUSION: The maxillary anterior teeth in Class II, division 2 malocclusion exhibited significant crown-root morphology which would influence the torque after orthodontic treatment. Special attention should be paid to the position of maxillary anterior teeth roots during orthodontic treatment for Class II, division 2 malocclusion. The ideal position of tooth movement should be decided by the root rather than the location of the crowns.

Preparation and characterization of novel carbon dioxide adsorbents based on polyethylenimine-modified Halloysite nanotubes.

New nano-sized carbon dioxide (CO2) adsorbents based on Halloysite nanotubes impregnated with polyethylenimine (PEI) were designed and synthesized, which were excellent adsorbents for the capture of CO2 at room temperature and had relatively high CO2 adsorption capacity. The prepared adsorbents were characterized by various techniques such as Fourier transform infrared spectrometry, gel permeation chromatography, dynamic light scattering, thermogravimetry, thermogravimetry-Fourier transform-infrared spectrometry, scanning electron microscopy and transmission electron microscopy. The adsorption characteristics and capacity were studied at room temperature, the highest CO2 adsorption capacity of 156.6 mg/g-PEI was obtained and the optimal adsorption capacity can reach a maximum value of 54.8 mg/g-adsorbent. The experiment indicated that this kind of adsorbent has a high stability at 80°C and PEI-impregnated adsorbents showed good reversibility and stability during cyclic adsorption-regeneration tests.

Unraveling brain aging through the lens of oral microbiota.

ABSTRACT: The oral cavity is a complex physiological community encompassing a wide range of microorganisms. Dysbiosis of oral microbiota can lead to various oral infectious diseases, such as periodontitis and tooth decay, and even affect systemic health, including brain aging and neurodegenerative diseases. Recent studies have highlighted how oral microbes might be involved in brain aging and neurodegeneration, indicating potential avenues for intervention strategies. In this review, we summarize clinical evidence demonstrating a link between oral microbes/oral infectious diseases and brain aging/neurodegenerative diseases, and dissect potential mechanisms by which oral microbes contribute to brain aging and neurodegeneration. We also highlight advances in therapeutic development grounded in the realm of oral microbes, with the goal of advancing brain health and promoting healthy aging.

Single-nucleus transcriptomics uncovers a geroprotective role of YAP in primate gingival aging.

Aging has a profound impact on the gingiva and significantly increases its susceptibility to periodontitis, a worldwide prevalent inflammatory disease. However, a systematic characterization and comprehensive understanding of the regulatory mechanism underlying gingival aging is still lacking. Here, we systematically dissected the phenotypic characteristics of gingiva during aging in primates and constructed the first single-nucleus transcriptomic landscape of gingival aging, by which a panel of cell type-specific signatures were elucidated. Epithelial cells were identified as the most affected cell types by aging in the gingiva. Further analyses pinpointed the crucial role of YAP in epithelial self-renew and homeostasis, which declined during aging in epithelial cells, especially in basal cells. The decline of YAP activity during aging was confirmed in the human gingival tissues, and downregulation of YAP in human primary gingival keratinocytes recapitulated the major phenotypic defects observed in the aged primate gingiva while overexpression of YAP showed rejuvenation effects. Our work provides an in-depth understanding of gingival aging and serves as a rich resource for developing novel strategies to combat aging-associated gingival diseases, with the ultimate goal of advancing periodontal health and promoting healthy aging.

Salivary metabolites are promising noninvasive biomarkers of drug-induced liver injury.

BACKGROUND: Drug-induced liver injury (DILI) is one of the most common adverse events of medication use, and its incidence is increasing. However, early detection of DILI is a crucial challenge due to a lack of biomarkers and noninvasive tests. AIM: To identify salivary metabolic biomarkers of DILI for the future development of noninvasive diagnostic tools. METHODS: Saliva samples from 31 DILI patients and 35 healthy controls (HCs) were subjected to untargeted metabolomics using ultrahigh-pressure liquid chromatography coupled with tandem mass spectrometry. Subsequent analyses, including partial least squares-discriminant analysis modeling, t tests and weighted metabolite coexpression network analysis (WMCNA), were conducted to identify key differentially expressed metabolites (DEMs) and metabolite sets. Furthermore, we utilized least absolute shrinkage and selection operato and random fores analyses for biomarker prediction. The use of each metabolite and metabolite set to detect DILI was evaluated with area under the receiver operating characteristic curves. RESULTS: We found 247 differentially expressed salivary metabolites between the DILI group and the HC group. Using WMCNA, we identified a set of 8 DEMs closely related to liver injury for further prediction testing. Interestingly, the distinct separation of DILI patients and HCs was achieved with five metabolites, namely, 12-hydroxydodecanoic acid, 3-hydroxydecanoic acid, tetradecanedioic acid, hypoxanthine, and inosine (area under the curve: 0.733-1). CONCLUSION: Salivary metabolomics revealed previously unreported metabolic alterations and diagnostic biomarkers in the saliva of DILI patients. Our study may provide a potentially feasible and noninvasive diagnostic method for DILI, but further validation is needed.

Hyperbranched polycoumarates with photofunctional multiple shape memory.

In good shape: The films of hyperbranched polycoumarate derivatives can undergo a reversible [2+2] cycloaddition under irradiation of UV light and behave like photomechanical elastomers. From a predetermined original shape A the photonically and thermally memorized shapes B and C were obtained. The original shape was recovered by photoirradiation (see picture; Tg =glass transition temperature).

Suppressing STAT3 activation impairs bone formation during maxillary expansion and relapse.

OBJECTIVES: The mid-palatal expansion technique is commonly used to correct maxillary constriction in dental clinics. However, there is a tendency for it to relapse, and the key molecules responsible for modulating bone formation remain elusive. Thus, this study aimed to investigate whether signal transducer and activator of transcription 3 (STAT3) activation contributes to osteoblast-mediated bone formation during palatal expansion and relapse. METHODOLOGY: In total, 30 male Wistar rats were randomly allocated into Ctrl (control), E (expansion only), and E+Stattic (expansion plus STAT3-inhibitor, Stattic) groups. Micro-computed tomography, micromorphology staining, and immunohistochemistry of the mid-palatal suture were performed on days 7 and 14. In vitro cyclic tensile stress (10% magnitude, 0.5 Hz frequency, and 24 h duration) was applied to rat primary osteoblasts and Stattic was administered for STAT3 inhibition. The role of STAT3 in mechanical loading-induced osteoblasts was confirmed by alkaline phosphatase (ALP), alizarin red staining, and western blots. RESULTS: The E group showed greater arch width than the E+Stattic group after expansion. The differences between the two groups remained significant after relapse. We found active bone formation in the E group with increased expression of ALP, COL-I, and Runx2, although the expression of osteogenesis-related factors was downregulated in the E+stattic group. After STAT3 inhibition, expansive force-induced bone resorption was attenuated, as TRAP staining demonstrated. Furthermore, the administration of Stattic in vitro partially suppressed tensile stress-enhanced osteogenic markers in osteoblasts. CONCLUSIONS: STAT3 inactivation reduced osteoblast-mediated bone formation during palatal expansion and post-expansion relapse, thus it may be a potential therapeutic target to treat force-induced bone formation.

Application of digital guide plate with drill-hole sharing technique in the mandible reconstruction.

Background/purpose: With the development of computer-assisted surgery, digital guide plate was widely used in vascularized bone flap grafts for mandibular reconstruction. The purpose of this study was to design and manufacture a digital guide plate with drill-hole sharing for mandibular reconstruction and assess for surgical accuracy. Materials and methods: 17 patients that required mandibular reconstruction using fibula free flap or iliac crest free flap were included in the study. The computed tomography (CT) data of the patient's mandible and pelvis or fibula were acquired preoperatively. A surgical simulation was then performed using computer-aided surgical simulation (CASS) technology based on above date, which allowed the design of two cutting guide and a repositioning guide for mandibular reconstruction. After surgery, the accuracy of reconstruction was evaluated by superimposing the postoperative image onto the preoperative image of mandible, recording the linear and angular deviation of landmarks, measuring the differences between the planned and actual outcomes. Results: The osteotomy and repositioning of fibula or iliac crest segments were successfully performed as planned using surgical guides. The digital guide plate with drill-hole sharing showed excellent accuracy, When the iliac crest or the fibula free flap were used for mandibular reconstruction, the largest mean differences between the preoperative and postoperative were 1.11 mm and 2.8° or 1.3 mm and 3.87°. Conclusion: The digital guide plate with drill-hole sharing designed preoperatively provides a reliable method of for the mandibular reconstruction. This can assist surgeons in accurately performing osteotomy and repositioning fibula or iliac crest segments during the mandibular reconstruction.

Portable Handheld "SkinPen" Loaded with Biomaterial Ink for In Situ Wound Healing.

In situ bioprinting has emerged as an attractive tool for directly depositing therapy ink at the defective area to adapt to the irregular wound shape. However, traditional bioprinting exhibits an obvious limitation in terms of an unsatisfactory bioadhesive effect. Here, a portable handheld bioprinter loaded with biomaterial ink is designed and named "SkinPen". Gelatin methacrylate (GelMA) and Cu-containing bioactive glass nanoparticles (Cu-BGn) serve as the main components to form the hydrogel ink, which displays excellent biocompatibility and antibacterial and angiogenic properties. More importantly, by introducing ultrasound and ultraviolet in a sequential programmed manner, the SkinPen achieves in situ instant gelation and amplified (more than threefold) bioadhesive shear strength. It is suggested that ultrasound-induced cavitation and the resulting topological entanglement contribute to the enhanced bioadhesive performance together. Combining the ultrasound-enhanced bioadhesion with the curative role of the hydrogel, the SkinPen shows a satisfactory wound-healing effect in diabetic rats. Given the detachable property of the SkinPen, the whole device can be put in a first-aid kit. Therefore, the application scenarios can be expanded to many kinds of accidents. Overall, this work presents a portable handheld SkinPen that might provide a facile but effective approach for clinical wound management.

One-step fabrication of polymeric Janus nanoparticles for drug delivery.

With its unique structure of two compartments, Janus particles can be used for many applications for which monomorphic particles are inadequate, including to be used as a drug delivery system to deliver multiple payloads with widely different solubility. Here we report on a fluidic nanoprecipitation system (FNPS), capable of fabricating biocompatible Janus polymeric nanoparticles comprised of the FDA-approved polymer poly(lactic-co-glycolic acid) (PLGA). The FNPS contains dual inlets, one for each half of the particle, that insert into the precipitation stream. The system provides a one-step approach for production of Janus polymeric particles with submicrometer diameters and is likely amenable to substantial scale-up. To the best of our knowledge, this is the first demonstration of biocompatible Janus nanoparticles that encapsulate a hydrophobic drug (paclitaxel) on one side and a hydrophilic drug (doxorubicin hydrochloride) on the other.

Association between CYP19A1 genotype and pubertal sagittal jaw growth.

INTRODUCTION: Sagittal jaw growth is influenced during puberty by a ratio of androgens and estrogens. The CYP19A1 (formerly CYP19) gene encodes the cytochrome P450 enzyme aromatase (estrogen synthetase), which converts testosterone to estrogen. Genetic variations including single nucleotide polymorphisms might regulate CYP19A1 gene expression or the function of the aromatase protein and thus influence sagittal jaw growth. METHODS: The annual sagittal jaw growth in 92 pubertal orthodontic patients was determined by using pretreatment and posttreatment cephalometric radiographs. Single nucleotide polymorphisms rs2470144 and rs2445761 were genotyped and haplotypes constructed. Associations between genotypes or haplotypes and the annual sagittal growth were estimated by using JMP (version 9.0; SAS Institute, Cary, NC). RESULTS: Two single nucleotide polymorphisms were significantly associated with average differences in annual sagittal jaw growth in boys. Haplotype analysis demonstrated that haplotypes T(rs2470144)T(rs2445761) and C(rs2470144)T(rs2445761) had significant effects on annual sagittal maxillary growth and on mandibular growth in boys. No association was found in girls. CONCLUSIONS: A quantitative trait locus that influences male pubertal sagittal jaw growth might exist in the CYP19A1 gene, and single nucleotide polymorphisms rs2470144 and rs2445761 might be inside this quantitative trait locus or be linked to it.

Air pollutant emission and reduction potentials from the sintering process of the iron and steel industry in China in 2017.

The iron and steel industry (ISI) is one of the most energy-intensive industries in China, which makes a substantial contribution to the emissions of air pollutants. Among the various manufacturing processes, sintering is the major emitting process, which shares over half of the emissions of sulfur dioxide (SO2), nitrogen oxide (NOx) and particulate matter (PM) for the entire industry. In this study we made a comprehensive evaluation of the air pollutant emissions from the sintering process of China's ISI in 2017 based on the Continuous Emission Monitoring System (CEMS) database and estimated the future reduction potentials. We found that there was a general decreasing trend of emission concentrations in the sintering flue gas in response to the strengthened emission control policies, but the mild increase of the oxygen content in the second half of the year flattened the decreasing trend, indicating the necessity for simultaneous control of the oxygen content in the flue gas. Despite the relative high standard-reaching rates of 90% to the emission concentration limits in GB 28662-2012, the standard-reaching rates to the ultra-low emission standards were only 12%, 40% and 27% for NOx, SO2 and PM respectively, with the lowest value mostly occurred in the western provinces. In 2017, the NOx, SO2 and PM emissions from the sintering process were 378.6 kt, 169.0 kt and 51.9 kt, respectively. If the ultra-low emission standards were met, the corresponding NOx, SO2 and PM emissions would decrease by 69.9%, 52.9%, and 56.4% respectively, illustrating large emission reducing potentials by achieving the ultra-low emission standards.

Four-Octyl itaconate ameliorates periodontal destruction via Nrf2-dependent antioxidant system.

Periodontitis is a widespread oral disease characterized by continuous inflammation of the periodontal tissue and an irreversible alveolar bone loss, which eventually leads to tooth loss. Four-octyl itaconate (4-OI) is a cell-permeable itaconate derivative and has been recognized as a promising therapeutic target for the treatment of inflammatory diseases. Here, we explored, for the first time, the protective effect of 4-OI on inhibiting periodontal destruction, ameliorating local inflammation, and the underlying mechanism in periodontitis. Here we showed that 4-OI treatment ameliorates inflammation induced by lipopolysaccharide in the periodontal microenvironment. 4-OI can also significantly alleviate inflammation and alveolar bone loss via Nrf2 activation as observed on samples from experimental periodontitis in the C57BL/6 mice. This was further confirmed as silencing Nrf2 blocked the antioxidant effect of 4-OI by downregulating the expression of downstream antioxidant enzymes. Additionally, molecular docking simulation indicated the possible mechanism under Nrf2 activation. Also, in Nrf2-/- mice, 4-OI treatment did not protect against alveolar bone dysfunction due to induced periodontitis, which underlined the importance of the Nrf2 in 4-OI mediated periodontitis treatment. Our results indicated that 4-OI attenuates inflammation and oxidative stress via disassociation of KEAP1-Nrf2 and activation of Nrf2 signaling cascade. Taken together, local administration of 4-OI offers clinical potential to inhibit periodontal destruction, ameliorate local inflammation for more predictable periodontitis.

Dynamically Bioresponsive DNA Hydrogel Incorporated with Dual-Functional Stem Cells from Apical Papilla-Derived Exosomes Promotes Diabetic Bone Regeneration.

The regeneration of bone defects in patients with diabetes mellitus (DM) is remarkably impaired by hyperglycemia and over-expressed proinflammatory cytokines, proteinases (such as matrix metalloproteinases, MMPs), etc. In view of the fact that exosomes represent a promising nanomaterial, herein, we reported the excellent capacity of stem cells from apical papilla-derived exosomes (SCAP-Exo) to facilitate angiogenesis and osteogenesis whether in normal or diabetic conditions in vitro. Then, a bioresponsive polyethylene glycol (PEG)/DNA hybrid hydrogel was developed to support a controllable release of SCAP-Exo for diabetic bone defects. This system could be triggered by the elevated pathological cue (MMP-9) in response to the dynamic diabetic microenvironment. It was further confirmed that the administration of the injectable SCAP-Exo-loaded PEG/DNA hybrid hydrogel into the mandibular bone defect of diabetic rats demonstrated a great therapeutic effect on promoting vascularized bone regeneration. In addition, the miRNA sequencing suggested that the mechanism of dual-functional SCAP-Exo might be related to highly expressed miRNA-126-5p and miRNA-150-5p. Consequently, our study provides valuable insights into the design of promising bioresponsive exosome-delivery systems to improve bone regeneration in diabetic patients.

[Environmental Process, Effects and Risks of Emerging Contaminants in the Estuary-Coastal Environment].

Human activities and global climate change have contributed substantially to the input of land-sourced pollutants into the aquatic environment, especially for emerging or newly identified contaminants, such as microplastics, emerging persistent organic pollutants, pharmaceuticals, and personal care products. The prevalence and toxicity of these emerging pollutants has raised continued concern for the health and safety of the public worldwide. A review of sources, distribution, interfacial transport processes of microplastics, per-and polyfluorinated compounds, antibiotics, and endocrine-disrupting chemicals and factors that influence their environmental behavior in the estuary-coastal environment have been included. The adverse ecological effects and health risks of these emerging contaminants to humans were also reviewed. Lastly, the direction of future research was provided regarding the environmental behavior of multiple emerging pollutants in the coastal environment and the health risks resulting from their interactions, supporting the prevention and control of marine pollution and the healthy development of the marine economy.

Trends in air pollutant emissions from the sintering process of the iron and steel industry in the Fenwei Plain and surrounding regions in China, 2014-2017.

China is the largest iron and steel producer and consumer in the world. The iron and steel manufacture, especially the sintering process, is energy-intensive, and contributes substantially to air pollutant emissions in China. Compared with other regions, the Fenwei Plain, a coal base, has a heavy industry concentration, and high pollutant emission total amount. In addition, urban air pollution has rebounded, and the pollutants concentrations in many cities have increased rather than decreased. In this study, we investigated the inter-annual trends of particulate matter (PM), sulfur dioxide (SO2) and nitrogen oxide (NOx) from the sintering process of iron and steel industry (ISI) in the Fenwei Plain and the surrounding regions in China from 2014 to 2017 based on the Continuous Emission Monitoring System (CEMS). We found that the oxygen content of the flue gas is the key to judge whether the sintering flue gas air pollutant emission concentration can meet the standard. Therefore, we adopted the converted concentration by the reference oxygen content in the final analysis. Overall, the SO2 and PM emission concentrations exhibit a downward trend from 2014 to 2017, in response to the strengthening of the emission control policies and standards in the ISI, whereas the NOx emission concentration did not change significantly during the same period The emission factors (EFs) of PM, NOx and SO2 obtained in this study are lower than previous estimates. In 2017, the SO2 and PM emissions were 27% and 32% lower than the levels in 2014.While NOx was 22% higher than the level in 2014. Our study confirmed the effectiveness of current emission control policies and standards in the iron and steel sector. However, the levels of NOx emissions were still high until 2017, illustrating the urgent need for more advanced emission control technologies to further reduce NOx emissions from the sintering flue gas in China.