Comparative assessment of orthodontic clear aligner versus fixed appliance for anterior retraction: a finite element study.

BACKGROUND: The aim of this study is to conduct a comparative evaluation of different designs of clear aligners and examine the disparities between clear aligners and fixed appliances. METHODS: 3D digital models were created, consisting of a maxillary dentition without first premolars, maxilla, periodontal ligaments, attachments, micro-implant, 3D printed lingual retractor, brackets, archwire and clear aligner. The study involved the creation of five design models for clear aligner maxillary anterior internal retraction and one design model for fixed appliance maxillary anterior internal retraction, which were subsequently subjected to finite element analysis. These design models included: (1) Model C0 Control, (2) Model C1 Posterior Micro-implant, (3) Model C2 Anterior Micro-implant, (4) Model C3 Palatal Plate, (5) Model C4 Lingual Retractor, and (6) Model F0 Fixed Appliance. RESULTS: In the clear aligner models, a consistent pattern of tooth movement was observed. Notably, among all tested models, the modified clear aligner Model C3 exhibited the smallest differences in sagittal displacement of the crown-root of the central incisor, vertical displacement of the central incisor, sagittal displacement of the second premolar and second molar, as well as vertical displacement of posterior teeth. However, distinct variations in tooth movement trends were observed between the clear aligner models and the fixed appliance model. Furthermore, compared to the fixed appliance model, significant increases in tooth displacement were achieved with the use of clear aligner models. CONCLUSIONS: In the clear aligner models, the movement trend of the teeth remained consistent, but there were variations in the amount of tooth displacement. Overall, the Model C3 exhibited better torque control and provided greater protection for posterior anchorage teeth compared to the other four clear aligner models. On the other hand, the fixed appliance model provides superior anterior torque control and better protection of the posterior anchorage teeth compared to clear aligner models. The clear aligner approach and the fixed appliance approach still exhibit a disparity; nevertheless, this study offers a developmental direction and establishes a theoretical foundation for future non-invasive, aesthetically pleasing, comfortable, and efficient modalities of clear aligner treatment.

Structural Properties and Surface Modification Decided Pharmacokinetic Behavior and Bio-Distribution of DNA Origami Frameworks in Mice.

This study establishes and validates a series of three dimentional (3D) DNA origami frameworks (DOFs) carrying imaging probes to evaluate their pharmacokinetics and real-time bio-distribution in mice. Three typical DOFs with distinguished structural properties are subjected to mice intravenous injection to systematically investigate their in vivo behaviors. Tracing the radioisotope zirconium-89 (89 Zr) trapped at the inner space of the frameworks, positron emission tomography (PET) imaging is employed to record the real-time bio-distribution of the structures and acquire their pharmacokinetic parameters in the major metabolic organs. The 3D DOFs show different behavior compared to previous structures, with lower kidney accumulation and higher liver retention. Modifications to the structures, such as exposed ssDNA or polyethylene glycol (PEG) moieties, impact their behavior, but are structure-dependent. The 43 nm icosahedra framework among the DOFs perform the best in liver targeting, with the ssDNA extensions enhancing this tendency. The modification of triantennary N-acetylgalactosamine (GalNAc), further improves its uptake in liver cells, especially in hepatocytes over other cell types, discovered by flow cytometry analysis.

[Clinical phenotype and genetic analysis of MED13L syndrome].

A boy aged 4 years and 2 months was found to have delayed language and motor development, instability of gait, poor eye contact, stereotyped behavior, and seizure at the age of 3 years. Physical examination showed special facial features, including plagiocephaly, blepharoptosis, wide nasal bridge, down-turned mouth corners at both sides, and low-set ears. There were only two knuckles at the little finger of the left hand. The anteroposterior and lateral films of the spine showed scoliosis; echocardiography showed ventricular septal defect; the Gesell Developmental Scale showed delayed language development and moderate intellectual disability; there were no abnormalities in the karyotype; genome-wide SNP arrays found a duplication in 12q24.21 region with a size of 1.03 Mb in chromosome 12, while this was not seen in his parents. The boy was diagnosed with MED13L syndrome. Point mutation, deletion, and duplication in the MED13L gene can lead to MED13L syndrome. The patients with different genotypes may have different phenotypes. Genome-wide SNP arrays may help with the diagnosis of this disease.

Multivariate analysis of the volatile components in tobacco based on infrared-assisted extraction coupled to headspace solid-phase microextraction and gas chromatography-mass spectrometry.

A novel infrared-assisted extraction coupled to headspace solid-phase microextraction followed by gas chromatography with mass spectrometry method has been developed for the rapid determination of the volatile components in tobacco. The optimal extraction conditions for maximizing the extraction efficiency were as follows: 65 µm polydimethylsiloxane-divinylbenzene fiber, extraction time of 20 min, infrared power of 175 W, and distance between the infrared lamp and the headspace vial of 2 cm. Under the optimum conditions, 50 components were found to exist in all ten tobacco samples from different geographical origins. Compared with conventional water-bath heating and nonheating extraction methods, the extraction efficiency of infrared-assisted extraction was greatly improved. Furthermore, multivariate analysis including principal component analysis, hierarchical cluster analysis, and similarity analysis were performed to evaluate the chemical information of these samples and divided them into three classifications, including rich, moderate, and fresh flavors. The above-mentioned classification results were consistent with the sensory evaluation, which was pivotal and meaningful for tobacco discrimination. As a simple, fast, cost-effective, and highly efficient method, the infrared-assisted extraction coupled to headspace solid-phase microextraction technique is powerful and promising for distinguishing the geographical origins of the tobacco samples coupled to suitable chemometrics.

Facile synthesis of iminated lignin for enhanced free radical and lead ion scavenging capabilities.

Kraft lignin (KL) holds significant potential as a renewable resource for the development of innovative materials that are currently not fully utilized. In this study, a novel iminated lignin (IL) was synthesized by grafting primary amine lignin (N-KL) onto salicylaldehyde. The effects of the dosage and reaction temperature on the nitrogen content of N-KL were evaluated. The maximum nitrogen content in N-KL reached to 3.32 %. Characterization by spectroscopy techniques (FT-IR, XPS, and NMR), elemental analysis, and gel permeation chromatography confirmed the imination of lignin. Additionally, the antioxidant activity of the lignin samples was investigated using the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging ability. Moreover, the DPPH radical scavenging capacity of IL-6 (IC50 = 38.6 ± 3.9 µg/mL) was close to that of commercial antioxidant butylated hydroxytoluene (BHT) (IC50 = 37.7 ± 4.5 µg/mL). Furthermore, the adsorption equilibrium results indicated that IL-6 had a maximum uptake of 115.6 mg/g Pb2+, which was 3.2-fold higher than that of KL. Kinetic adsorption experiments suggested that IL-6 adsorption follows a pseudo-second-order model. Therefore, the synthesized iminated lignin is a promising candidate for the development of environmentally friendly materials with applications as an antioxidant and lead-ion adsorbent.

Decoration of sodium carboxymethylcellulose gel microspheres with modified lignin to enhanced methylene blue removal.

The introduction of active groups from biomass is currently the most promising alternative method for increasing the adsorption effect of dyes. In this study, modified aminated lignin (MAL) rich in phenolic hydroxyl and amine groups was prepared by amination and catalytic grafting. The factors influencing the modification conditions of the content of amine and phenolic hydroxyl groups were explored. Chemical structural analysis results confirmed that MAL was successfully prepared using a two-step method. The content of phenolic hydroxyl groups in MAL significantly increased to 1.46 mmol/g. MAL/sodium carboxymethylcellulose (NaCMC) gel microspheres (MCGM) with enhanced methylene blue (MB) adsorption capacity owing to the formation of a composite with MAL were synthesized by a sol-gel process followed by freeze-drying and using multivalent cations Al3+ as cross-linking agents. In addition, the effects of the MAL to NaCMC mass ratio, time, concentration, and pH on the adsorption of MB were explored. Benefiting from a sufficient number of active sites, MCGM exhibited an ultrahigh adsorption capacity for MB removal, and the maximum adsorption capacity was 118.30 mg/g. These results demonstrated the potential of MCGM for wastewater treatment applications.

Single and combined effect of tetracycline and polyethylene microplastics on two drought contrasting cultivars of Oryza sativa L. (Rice) under drought stress.

Co-exposure of tetracycline (TC) and polyethylene microplastic (MP-PE) pollution might result in more intricate effects on rice growth and grain quality. In present study, two different rice cultivars of contrasting drought tolerance, Hanyou73 (H73, drought-resistant) and Quanyou280 (Q280, drought-sensitive) were grown on MP-PE and TC-contaminated soils under drought. It was found that drought stress had different influence on TC accumulation in the two rice cultivars. H73 accumulated more TC in leaves and grains without drought stress while Q280 accumulated more TC under drought stress. Furthermore, metabolomics results demonstrated that under drought stress, about 80 % of metabolites in H73 and 95 % in Q280 were down-regulated as compared to non-drought treatments. These findings provide insights into the effects of TC and MP-PE with and without drought stress on potential risks to rice growth and grain quality, which has implications on rice production and cultivar election under multiple-stress conditions.

Assessment of labially impacted canines traction mode with clear aligners vs. fixed appliance: A comparative study based on 3D finite element analysis.

Purpose: The objective of this study was to evaluate and compare the biomechanical differences between clear aligner and fixed appliance in the traction of labially impacted canines based on 3D finite element analysis. Methods: A series of patient-oriented finite element models were constructed, including a maxillary dentition with a right labially canine, maxilla, periodontal ligaments, traction attachments, and clear aligners. The two most common clinical scenarios were investigated: Scenario A: impacted canine (distal) and Scenario B: impacted canine (mesial). For each clinical scenario, three traction models with clear aligners and one fixed appliance model were established. Results: In all four models, the impacted canines exhibited similar initial displacement tendencies of mesially rotated in Scenario A and distally rotated in Scenario B, and with small differences in periodontal ligament stress magnitude. However, the sum of the periodontal ligament stresses of the anchorage teeth in the clear aligner mode was in the range of 56.28-76.21 kPa and in the fixed appliance mode was in the range of 6.61-7.22 kPa. The maximum value of initial displacement of the anchorage teeth in the clear aligner mode was in the range of 13.71-19.72 µm, while in the fixed appliance mode was 3.10-3.92 µm. Conclusion: For impacted canines, clear aligner mode and fixed appliance mode have little difference in biomechanical effect. However, the anchorage teeth in the clear aligner mode endure higher stress and show a more pronounced displacement tendency. In addition, the biomechanical effects of different clear aligner traction models are various but not obvious.

Enamel matrix derivative (EMD) enhances the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs).

To investigate the EMD's capacity in BMSCs osteogenic differentiation. In vivo and in vitro, BMSCs were treated with EMD, scanning electron microscopy, and Alizarin Red staining were used to detect the changes in the osteogenic ability of BMSCs, and the proliferation ability of BMSCs was evaluated by CCK8. In addition, by adding xav939, a typical inhibitor of Wnt/ß-catenin signaling pathway, the regulatory function of Wnt/ß-catenin signaling was clarified. The results showed that EMD promote cell proliferation and 25 µg/ml EMD had the most significant effect. Cells inducing osteogenesis for 2 and 3 even 4 weeks, the cell staining is deeper in EMD treated group than that of the control (P < 0.05) by alizarin Red staining, suggesting more mineralization of BMSCs. In vivo implanting the titanium plate wrapped with 25 µg/ml EMD treated-BMSC film into nude mice for 8 weeks, more nodules were formed on the surface of the titanium plate than that the control (P < 0.05). HE showed that there is a little blue-violet immature bone-like tissue block. Besides, the expression of RUNX Family Transcription Factor 2 (Runx2), Osterix, Osteocalcin (OCN), collagen I (COLI), alkaline phosphatase (ALP) and ß-catenin were inhibited in xav939 group (P < 0.05); Inversely, all were activated in EMD group (P < 0.05). In conclusion, EMD promoted the proliferation and osteogenic differentiation of BMSCs. EMD's function on BMSCs might be associated with the Wnt/ß-catenin signaling pathway.

Magnetic nanoparticles of nitrogen enriched carbon (mnNEC) for analysis of pesticides and metabolites in zebrafish by gas chromatography-mass spectrometry.

Nanosized carbon based sorbents have been widely used for separation, enrichment and desalting of biological samples because of their distinguished characteristics. In this work, magnetic nanoparticles of nitrogen enriched carbon (mnNEC) have been developed for enrichment of organochlorine pesticide DDT and metabolite DDE that have been accumulated in zebrafish during the course of environmental exposure. Polymerization of pyrrole was performed in the aqueous suspension of Fe(3)O(4) nanoparticles. Resultant core-shell nanoparticules coated with polypyrrole were then subjected to a process of carbonization under high temperature and nitrogen atmospheric condition. The presence of nitrogen atoms in carbon nanoparticles increases the hydrophilicity and dispersability in aqueous samples. It has been experimentally demonstrated that mnNEC can be effectively dispersed in aqueous samples and rapidly isolated by the application of an external magnetic field. Recoveries of DDT and DDE from water range from 90% to 102% and 85-97% respectively. In combination with Selected Ion Monitoring (SIM) experiments of gas chromatography-mass spectrometry, the detection limit can be down to low ng/mL level. By using mnNEC approach, two interesting results have been found for zebrafish with 60 days exposure to DDT (1 µg/l). (1) There is higher concentration of DDT (37-143 ng/g) and DDE (173-1108 ng/g) in male zebrafish body tissues than that of female (7-52 ng/g and 146-362 ng/g for DDT and DDE respectively). (2) There is high ratio of DDE/DDT for both female and male zebrafish, implying high environmental persistence and ongoing bioaccumulation.

[The genotypic diversity of oral Actinomyces naeslundii of root caries in aged people].

OBJECTIVE: To investigate the genotypic diversity of Actinomyces naeslundii in aged people and the relationship between the genotypes of Actinomyces naeslundii and root caries. METHODS: According to the inclusion criteria, 20 aged people with root caries and 20 without root caries were chosen into two groups for this study. Two sites were chosen in subjects with root caries: One site was the exposed sound root surface, and the other site was the root caries. In subjects without root caries the sampling site of root surface was exposed. Bacteria were cultured and then identified. Repetitive extragenic palindromic sequence-based polymerase chain reaction (REP-PCR) was used to analyze the genotypic diversity of the Actinomyces naeslundii clinic isolates. RESULTS: 299 strains were isolated from the groups, 156 strains were chosen to analyze, belonged to 61 different genotypes. At the site of sound root surface in the subjects with root caries, there were 57 strains with 25 different patterns. At the site of root caries and of sound root surface in subjects without caries, there were 34 strains with 25 different patterns and 65 strains with 26 different patterns respectively. There was the genotypic diversity within Actinomyces naeslundii. There was significant difference in the genotypes in every individual site. CONCLUSION: Many different genotypes of Actinomyces naeslundii concerned with occurrence of root caries.