A Heat-Resistant Polymer Based on the Reversible Change in Polymer Skeleton Structure for Self-Anticounterfeiting.

Heat-resistant polymer materials have been widely used in many fields, but their anticounterfeit is still a significant challenge. This work has successfully constructed a heat-resistant polymer material that can achieve self-anticounterfeit. In response to changes in the external environment, the color of polymer changes from yellow-green to red reversibly, which is due to the fact that polymer material's backbone undergoes isomerization. Therefore, this high-performance polymer material can not only be used in a high-temperature environment for a long time but also achieve its anticounterfeit and be used in advanced security applications.

Newly graphene/polypyrrole (rGO/PPy) modified carbon felt as bio-cathode in bio-electrochemical systems (BESs) achieving complete denitrification.

Nitrate reduction in bio-electrochemical systems (BESs) has attracted wide attention due to its low sludge yields and cost-efficiency advantages. However, the high resistance of traditional electrodes is considered to limit the denitrification performance of BESs. Herein, a new graphene/polypyrrole (rGO/PPy) modified electrode is fabricated via one-step electrodeposition and used as cathode in BES for improving nitrate removal from wastewater. The formation and morphological results support the successful formation of rGO/PPy nanohybrids and confirm the part covalent bonding of Py into GO honeycomb lattices to form a three-dimensional cross-linked spatial structure. The electrochemical tests indicate that the rGO/PPy electrode outperforms the unmodified electrode due to the 3.9-fold increase in electrochemical active surface area and 6.9-fold decrease in the charge transfer resistance (Rct). Batch denitrification activity tests demonstrate that the BES equipped with modified rGO/PPy biocathode could not only achieve the full denitrification efficiency of 100% with energy recovery (15.9 × 10-2 ± 0.14 A/m2), but also favor microbial attach and growth with improved biocompatible surface. This work provides a feasible electrochemical route to fabricate and design a high-performance bioelectrode to enhance denitrification in BESs.

Minimizing Cross-Reactivity for the Chemiluminescent Lateral Flow Immunoassay of Cardiac Troponin I Based on PEGylation of Gold Nanoparticles.

Lateral flow immunoassays (LFIAs) have been employed extensively for the rapid, accurate, and portable detection of protein biomarkers in healthcare. However, the cross-reactivity, especially in the multiplexed detection, leads to false-positive errors that would further limit their practical applications. In this work, we report a highly sensitive and accurate chemiluminescent LFIA based on the synthesis of the Au nanoparticle-antibody-horseradish peroxidase-polyethylene glycol conjugate for detecting cardiac troponin I (cTnI), a major biomarker of acute myocardial infarction. Due to the presence of polyethylene glycol, the accuracy of the LFIA was improved significantly from a clear false positive signal to the absence of a false positive signal. In addition, the device exhibited a highly sensitive detection of cTnI in the concentration range of 1-90 ng mL-1, and the detection limit can be as low as 10 pg mL-1. The method further enabled the multiplex detection of cTnI and myoglobin successfully. It is anticipated that this work may open new paradigms for the development of a variety of lateral flow devices with high sensitivity and accuracy and further lead to widespread practical applications in clinical diagnosis.

3 L split-dose polyethylene glycol is superior to 2 L polyethylene glycol in colonoscopic bowel preparation in relatively high-BMI (≥ 24 kg/m2) individuals: a multicenter randomized controlled trial.

BACKGROUND: Whether body mass index (BMI) is a risk factor for poor bowel preparation is controversial, and the optimal bowel preparation regimen for people with a high BMI is unclear. METHODS: We prospectively included 710 individuals with high BMIs (≥ 24 kg/m2) who were scheduled to undergo colonoscopy from January to November 2021 at 7 hospitals. Participants were randomly allocated into 3 L split-dose polyethylene glycol (PEG) group (n=353) and 2 L PEG group (n=357). The primary outcome was the rate of adequate bowel preparation, and the secondary outcomes included Boston Bowel Preparation Scale (BBPS) score, polyp detection rate, cecal intubation rate, and adverse reactions during bowel preparation. Furthermore, we did exploratory subgroup analyses for adequate bowel preparation. RESULTS: After enrollment, 15 individuals didn't undergo colonoscopy, finally 345 participants took 3 L split-dose PEG regimen, and 350 participants took 2 L PEG regimen for colonoscopic bowel preparation. 3 L split-dose PEG regimen was superior to 2 L PEG regimen in the rate of adequate bowel preparation (81.2% vs. 74.9%, P = 0.045), BBPS score (6.71±1.15 vs. 6.37±1.31, P < 0.001), and the rate of polyp detection (62.0% vs. 52.9%, P = 0.015). The cecal intubation rate was similar in both groups (99.7%). Regarding adverse reactions, individuals were more likely to feel nausea in the 3 L PEG group (30.9% vs. 19.3%; P = 0.001); however, the degree was mild. In the subgroup analysis for adequate bowel preparation, 3 L split-dose PEG regimen performed better than 2 L PEG regimen in the overweight (BMI 25-29.9 kg/m2 ) (P = 0.006) and individuals with constipation (P = 0.044), while no significant differences were observed in relatively normal (BMI 24-24.9 kg/m2) (P = 0.593) and obese individuals (BMI ≥ 30 kg/m2) (P = 0.715). CONCLUSIONS: 3 L split-dose PEG regimen is superior to 2 L PEG regimen for colonoscopic Bowel Preparation in relatively high-BMI individuals, especially overweight individuals (BMI 25-29.9 kg/m2 ). TRIAL REGISTRATION: This trial was registered in the Chinese Clinical Trials Registry (ChiCTR2000039068). The date of first registration, 15/10/2020, http://www.chictr.org.cn.

A novel, simplified method to prepare and preserve freeze-dried mouse sperm in plastic microtubes.

Although freeze-drying sperm can save space, reduce maintenance costs, and facilitate the transportation of genetic samples, the current method requires breakable, custom-made, and expensive glass ampoules. In the present study, we developed a simple and economical method for collecting freeze-dried (FD) sperm using commercially available plastic microtubes. Mouse epididymal sperm suspensions were placed in 1.5 ml polypropylene tubes, frozen in liquid nitrogen, and dried in an acrylic freeze-drying chamber, after which they were closed under a vacuum. The drying duration did not differ between the microtube and glass ampoule methods (control); however, the sperm recovery rate was higher using the microtube method, and the physical damage to the sperm after rehydration was also reduced. Intracytoplasmic sperm injection (ICSI) using FD sperm stored in microtubes at -30°C yielded healthy offspring without reducing the success rate, even after 9 months of storage. Air infiltration into all microtubes stored at room temperature (RT) within 2 weeks of storage caused a drastic decrease in the fertilization rate of FD sperm; underwater storage did not prevent air infiltration. RT storage of FD sperm in microtubes for 1 week resulted in healthy offspring after ICSI (5-18%), but the addition of silica gel or CaCl2 did not improve the success rate. Our novel microtube method is currently the simplest and most effective method for treating FD sperm, contributing to the development of alternative low-cost approaches for preserving and transporting genetic resources.

Rutin alleviates bisphenol A-glycidyl methacrylate-induced generation of proinflammatory mediators through the MAPK and NF-κB pathways in macrophages.

Bisphenol A-glycidyl methacrylate (BisGMA) is a methacrylate monomer that is mainly used in three-dimensional structures to reconstruct dental and bony defects. BisGMA has toxic and proinflammatory effects on macrophages. Rutin is a natural flavonol glycoside that is present in various plants and has useful biological effects, such as anti-inflammatory, anticancer, and antioxidative effects. The aim of this study was to investigate the anti-inflammation of rutin in macrophages after exposure to BisGMA. Pretreatment of the RAW264.7 macrophage with rutin at 0, 10, 30, and 100 µM for 30 min before being incubated with BisGMA at 0 or 3 µM. Proinflammatory cytokines and prostaglandin (PG) E2 were detected by enzyme-linked immunosorbent assay (ELISA). Nitric oxide (NO) was detected by the Griess assay. Expression and phosphorylation of proteins were measured by Western blot assay. Pretreatment with rutin inhibited the BisGMA-induced generation of proinflammatory cytokines, including tumor necrosis factor (TNF)-α, interleukin (IL)-1ß, IL-6, and PGE2, in macrophages. Rutin also suppressed the BisGMA-induced secretion of NO and expression of inducible nitric oxide synthase (iNOS) in a concentration-dependent manner. Furthermore, rutin suppressed the mitogen-activated protein kinase (MAPK) phosphorylation in a concentration-dependent manner. Finally, rutin suppressed the BisGMA-induced phosphorylation of nuclear factor (NF)-κB p65 and degradation of inhibitor of κB (IκB). These results indicate that the concentration of rutin has an inhibitory effect on proinflammatory mediator generation, MAPK phosphorylation, NF-κB p65 phosphorylation, and IκB degradation. In conclusion, rutin is a potential anti-inflammatory agent for BisGMA-stimulated macrophages through NF-κB p65 phosphorylation and IκB degradation resulting from MAPK phosphorylation.

Cost-effectiveness analysis: nonsurgical root canal treatment versus single-tooth implant.

BACKGROUND: Economic evaluation of nonsurgical root canal treatment (NSRCT) and single-tooth implant (STI) provides useful information for medical decision. This retrospective study aimed to evaluate the cost-effectiveness of NSRCT versus single-tooth implant (STI) after 5-year treatment in a university affiliated hospital in Beijing, China. METHODS: 211 patients who underwent NSRCT and 142 patients who had STI were included and recalled after 5-year treatment. The propensity scores were used to match the cases of two treatment modalities. At recall, outcomes were determined based on clinical and radiographical examinations. For endodontically treated cases, absence or reduction of radiolucency were defined as success. Marginal bone loss (MBL) ≤ 4 mm were determined as success for implant cases. Direct and indirect costs were calculated in China Yuan (CNY). Patients' willingness to pay (WTP) for each treatment modality was evaluated by questionnaires. A cost-effectiveness analysis was performed from the societal perspective. RESULTS: 170 patients with 120 NSRCT teeth and 96 STI were available at recall. Based on propensity score matching, 76 endodontically treated teeth were matched to 76 implants. Absence of the radiolucency was observed in 58 of 76 endodontically treated teeth (76%) and reduction of the radiolucency in 9 of 76 teeth (12%) and altogether the success rate was 88%. 100% implants were detected with marginal bone loss (MBL) ≤ 4 mm. The cost advantage of NSRCT (4,751 CNY) over STI (20,298 CNY) was more pronounced. Incremental cost effectiveness ratio (ICER) was 129,563 CNY (STI-NSRCT) per success rate gained. It exceeded the patients' willingness to pay value 7,533 CNY. CONCLUSIONS: Clinical outcomes of NSRCT and STI could be predictable after 5-year treatment. NSRCT may be more cost-effective than STI for managing endodontically diseased teeth.

Effects of overtreatment with different attachment positions on maxillary anchorage enhancement with clear aligners: a finite element analysis study.

BACKGROUND: The effect of attachment positions on anchorage has not been fully explored. The aim of the present study is to analyze the effect of overtreatment with different anchorage positions on maxillary anchorage enhancement with clear aligners in extraction cases. METHODS: Models of the maxilla and maxillary dentition were constructed and imported into SOLIDWORKS software to create periodontal ligament (PDL), clear aligners, and attachments. Attachment positions on second premolars included: without attachment (WOA), buccal attachment (BA), and bucco-palatal attachment (BPA). Overtreatment degrees were divided into five groups (0°, 1°, 2°, 3°, 4°) and added on the second premolars. The calculation and analysis of the displacement trends and stress were performed using ANSYS software. RESULTS: Distal tipping and extrusion of the canines, and mesial tipping and intrusion of the posterior teeth occurred during retraction. A strong anchorage was achieved in cases of overtreatment of 2.8° with BA and 2.4° with BPA. Moreover, the BPA showed the best in achieving bodily control of the second premolars. When the overtreatment was performed, the canines and first molars also showed reduced tipping trends with second premolars attachments. And the stress on the PDL and the alveolar bone was significantly relieved and more evenly distributed in the BPA group. CONCLUSIONS: Overtreatment is an effective means for anchorage enhancement. However, the biomechanical effect of overtreatment differs across attachment positions. The BPA design performs at its best for stronger overtreatment effects with fewer adverse effects.

Endoscopic Cyanoacrylate Injection Versus Balloon-Occluded Retrograde Transvenous Obliteration for Prevention of Gastric Variceal Bleeding: A Randomized Controlled Trial.

BACKGROUND AND AIMS: The optimal treatment for gastric varices (GVs) is a topic that remains open for study. This study compared the efficacy and safety of endoscopic cyanoacrylate injection and balloon-occluded retrograde transvenous obliteration (BRTO) to prevent rebleeding in patients with cirrhosis and GVs after primary hemostasis. APPROACH AND RESULTS: Patients with cirrhosis and history of bleeding from gastroesophageal varices type 2 or isolated gastric varices type 1 were randomized to cyanoacrylate injection (n = 32) or BRTO treatment (n = 32). Primary outcomes were gastric variceal rebleeding or all-cause rebleeding. Patient characteristics were well balanced between two groups. Mean follow-up time was 27.1 ± 12.0 months in a cyanoacrylate injection group and 27.6 ± 14.3 months in a BRTO group. Probability of gastric variceal rebleeding was higher in the cyanoacrylate injection group than in the BRTO group (P = 0.024). Probability of remaining free of all-cause rebleeding at 1 and 2 years for cyanoacrylate injection versus BRTO was 77% versus 96.3% and 65.2% versus 92.6% (P = 0.004). Survival rates, frequency of complications, and worsening of esophageal varices were similar in both groups. BRTO resulted in fewer hospitalizations, inpatient stays, and lower medical costs. CONCLUSIONS: BRTO is more effective than cyanoacrylate injection in preventing rebleeding from GVs, with similar frequencies of complications and mortalities.

Hemocompatibility Multi-in-One Hydrogel Coating with ROS-Triggered Inflammation Suppression and Anti-Infection Properties for Blood-Contacting Device.

In traditional blood-contacting medical devices, infection and thrombosis are easily formed on the surface of the materials. In addition, inflammation is also a clinical complication that cannot be ignored. More importantly, there is a mutually promoting relationship between the inflammatory response and the infection as well as thrombosis. In this work, we propose a self-adaptive anti-inflammatory coating strategy combined with anti-infection and anticoagulant capacity, which was accomplished based on nano-Ag particles and dexamethasone (Dex)-loaded hydrogel coating. The coating loaded with nano-Ag endows it with good bactericidal performance, including Gram-positive and Gram-negative bacteria. As an anti-inflammatory drug, Dex was grafted onto hydrogel coating by a reactive oxygen species (ROS)-cleavable thioketal (TK) bond and released upon the trigger of an inflammatory environment, blocking further inflammatory cascade, providing self-adaptive anti-inflammatory properties, and avoiding side effects of the drug. It was demonstrated that the coating worked as a precise strategy to resist coagulation, infection, and inflammation, provided a new perspective for designing clinical complication-conformable coatings, and had great application prospects on blood-contacting medical devices.

Antibacterial and antibiofilm activities of novel antimicrobial peptide DP7 against the periodontal pathogen Porphyromonas gingivalis.

AIMS: Accumulating evidence suggests that Porphyromonas gingivalis is closely associated with the development of various chronic inflammatory diseases, particularly periodontitis. This study investigated the antibacterial activity and action mechanism of a novel antimicrobial peptide (AMP), DP7, against P. gingivalis. METHODS AND RESULTS: The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) for DP7 were determined via a broth microdilution method, revealing an MIC of 8 µg ml-1 and MBC of 32 µg ml-1 . Growth inhibition and killing assays confirmed the bactericidal effect of DP7, and treatment with DP7 at MBC eliminated P. gingivalis within 8 h. DP7 had a low cytotoxic effect against human cells. Transmission electron microscopy revealed that DP7 destroyed the bacterial membrane, and confocal laser scanning microscopy revealed its inhibitory effect on P. gingivalis biofilms. Quantitative reverse transcription-polymerase chain reaction revealed DP7-mediated inhibition of several virulence factor genes, partially explaining its antibacterial mechanism. CONCLUSIONS: DP7, a novel AMP with low mammalian cytotoxicity, inhibits both planktonic and biofilm forms of P. gingivalis by destroying the bacterial membrane and reducing virulence factor gene expression. SIGNIFICANCE AND IMPACT OF THE STUDY: DP7 has potential clinical application in the prevention and treatment of P. gingivalis-associated diseases.

A universal strategy for the fabrication of single-photon and multiphoton NIR nanoparticles by loading organic dyes into water-soluble polymer nanosponges.

The development of optical organic nanoparticles (NPs) is desirable and widely studied. However, most organic dyes are water-insoluble such that the derivatization and modification of these dyes are difficult. Herein, we demonstrated a simple platform for the fabrication of organic NPs designed with emissive properties by loading ten different organic dyes (molar masses of 479.1-1081.7 g/mol) into water-soluble polymer nanosponges composed of poly(styrene-alt-maleic acid) (PSMA). The result showed a substantial improvement over the loading of commercial dyes (3.7-50% loading) while preventing their spontaneous aggregation in aqueous solutions. This packaging strategy includes our newly synthesized organic dyes (> 85% loading) designed for OPVs (242), DSSCs (YI-1, YI-3, YI-8), and OLEDs (ADF-1-3, and DTDPTID) applications. These low-cytotoxicity organic NPs exhibited tunable fluorescence from visible to near-infrared (NIR) emission for cellular imaging and biological tracking in vivo. Moreover, PSMA NPs loaded with designed NIR-dyes were fabricated, and photodynamic therapy with these dye-loaded PSMA NPs for the photolysis of cancer cells was achieved when coupled with 808 nm laser excitation. Indeed, our work demonstrates a facile approach for increasing the biocompatibility and stability of organic dyes by loading them into water-soluble polymer-based carriers, providing a new perspective of organic optoelectronic materials in biomedical theranostic applications.

The effects of cortical bone thickness and miniscrew implant root proximity on the success rate of miniscrew implant: A retrospective study.

OBJECTIVE: To investigate the effects of cortical bone thickness (CBT), miniscrew implant root proximity (MRP) and other related factors on the success rate of miniscrew implant (MSI). MATERIALS AND METHODS: Four hundred and five MSIs placed in 171 patients were analysed in this retrospective study. The primary predictor variables were CBT and MRP at MSI insertion sites. The predictor variables also included patient, location, MSI design and procedure related factors. The outcome variable was the survival of MSI. The differences in measurement data between success group and failed group were evaluated by the analysis of variance and independent samples t tests. Patient, location, MSI design and procedure related factors associated with the MSI prognosis were analysed by survival analysis with Cox proportional hazard regression model. The P value was set at .05. And the survival curves of independent factors were plotted. RESULTS: The overall success rate of MSI was 82.7%. The age of MSI host, CBT, interdental root distance (IRD) and MRP at MSI sites showed no significant differences between failed group and success group. CBT and insertion jaws were independent prognosis factors screened out by Cox proportional hazard regression model. Failure risk (hazard ratio) of MSI with CBT <1 mm was 4.72. The failure risk in the mandible was 3.80 times as high as that in the maxilla. CONCLUSION: Inadequate CBT (<1 mm) contributed to the failure of MSI. MSI placed in the maxilla showed better prognosis compared to the mandible. MRP had no significant effect on the prognosis.

Comparison of Tensile Properties and Knot Security of Surgical Sutures: An In Vitro Mechanical Study.

PURPOSE: Studies on the mechanical properties and knot security of smaller sutures used in oral and maxillofacial surgery are limited. The objective of this study is to measure the tensile properties and knot security depending on the suture materials, knotting techniques, and number of throws using 5-0 sized sutures. METHODS: Seven 5-0 sized sutures were measured in both straight-pull and knot-pull according to the procedures outlined by the United States Pharmacopeia. Regarding knot security, there were 3 predictor variables: suture material, knot technique, and number of throws. Two surgical tying techniques were square knot and surgeon's knot and the number of throws were 3, 4, and 5. One-way analysis of variance was applied to test tensile properties (α = 0.05). The dichotomous outcome of knot security (stable or unstable) was analyzed using logistic regression analysis and odds ratios with Tukey-adjusted 95% confidence intervals. RESULTS: Ethicon polyglactin 910 was found to have the highest failure load (18.0 N) of straight, while silk sutures had the lowest of both straight and knotted. A higher elongation rate was found in the 2 monofilament suture materials polypropylene and polydioxanone. Knot security depended on the suture technique, material, and number of throws. Surgeon's knots were stronger than square knots. The number of throws required to achieve knot security depends on the specific combination. For polypropylene or Jinhuan silk with the surgeon's knot, 3 throws can probably achieve knot security. CONCLUSIONS: The new data presented in the study provided important information for guiding the selection of smaller suture materials for oral and maxillofacial surgery. A wider range of suture combinations should be tested, and more in vivo studies are needed to clarify the characteristics of sutures and knots.

Protective effect of wogonin on inflammatory responses in BisGMA-treated macrophages through the inhibition of MAPK and NFκB pathways.

Composites, resins, and sealants that are commonly used in orthopedics and dentistry are based on 2,2-bis[p-(2'-hydroxy-3'-methacryloxypropoxy)phenylene]propane (BisGMA), which induces proinflammatory responses in macrophages. The present study aimed to explore the anti-inflammatory responses of wogonin, which is a natural dihydroxyl flavonoid compound, in BisGMA-treated macrophages. According to the findings, wogonin exhibits anti-inflammatory, antiallergic, anticancer, and antioxidative properties. The generation of nitric oxide (NO) and the expression of inducible nitric oxide synthase (iNOS) were noted to be inhibited by wogonin in BisGMA-treated macrophages. Furthermore, the production of proinflammatory cytokines including tumor necrosis factor (TNF)-α, interleukin (IL)-1ß, and IL-6 was reduced. In addition, BisGMA-induced nuclear factor (NF)-κB p65 phosphorylation and inhibitor of κB (IκB) degradation were inhibited. Finally, the BisGMA-induced phosphorylation of mitogen-activated protein kinases (MAPKs), including p38 MAPK, extracellular signal-regulated kinase (ERK), c-Jun N-terminal kinase (JNK) was inhibited. All these effects were induced by wogonin in the macrophages in a concentration-dependent manner. Similar inhibitory effects of wogonin were observed on the production of NO and proinflammatory cytokines, expression of iNOS, phosphorylation of NF-κB p65 and MAPK, and degradation of IκB. These results indicated that rutin is a potential anti-inflammatory agent for BisGMA-treated macrophages that undergo NFκB p65 phosphorylation and IκB degradation through upstream MAPK phosphorylation. Therefore, wogonin inhibits BisGMA-induced proinflammatory responses in macrophages through the regulation of the NFκB pathway and its upstream factor, MAPK.

Protective Effect of Rutin on Triethylene Glycol Dimethacrylate-Induced Toxicity through the Inhibition of Caspase Activation and Reactive Oxygen Species Generation in Macrophages.

Rutin, also called quercetin-3-rhamnosyl glucoside, is a natural flavonol glycoside present in many plants. Rutin is used to treat various diseases, such as inflammation, diabetes, and cancer. For polymeric biomaterials, triethylene glycol dimethacrylate (TEGDMA) is the most commonly used monomer and serves as a restorative resin, a dentin bonding agent and sealant, and a bone cement component. Overall, TEGDMA induces various toxic effects in macrophages, including cytotoxicity, apoptosis, and genotoxicity. The aim of this study was to investigate the protective mechanism of rutin in alleviating TEGDMA-induced toxicity in RAW264.7 macrophages. After treatment with rutin, we assessed the cell viability and apoptosis of TEGDMA-induced RAW264.7 macrophages using an methylthiazol tetrazolium (MTT) assay and Annexin V-FITC/propidium iodide assay, respectively. Subsequently, we assessed the level of genotoxicity using comet and micronucleus assays, assessed the cysteinyla aspartate specific proteinases (caspases) and antioxidant enzyme (AOE) activity using commercial kits, and evaluated the generation of reactive oxygen species (ROS) using a dichlorodihydrofluorescein diacetate (DCFH-DA) assay. We evaluated the expression of heme oxygenase (HO)-1, the expression of nuclear factor erythroid 2 related factor (Nrf-2), and phosphorylation of AMP activated protein kinase (AMPK) using the Western blot assay. The results indicated that rutin substantially reduced the level of cytotoxicity, apoptosis, and genotoxicity of TEGDMA-induced RAW264.7 macrophages. Rutin also blocked the activity of caspase-3, caspase-8, and caspase-9 in TEGDMA-stimulated RAW264.7 macrophages. In addition, it decreased TEGDMA-induced ROS generation and AOE deactivation in macrophages. Finally, we found that TEGDMA-inhibited slightly the HO-1 expression, Nrf-2 expression, and AMPK phosphorylation would be revered by rutin. In addition, the HO-1 expression, Nrf-2 expression, and AMPK phosphorylation was enhanced by rutin. These findings indicate that rutin suppresses TEGDMA-induced caspase-mediated toxic effects through ROS generation and antioxidative system deactivation through the Nrf-2/AMPK pathway. Therefore, rutin has the potential to serve as a novel antitoxicity agent for TEGDMA in RAW264.7 macrophages.

Knowledge of Oral Cancer Amongst Dental Patients Attending Public Clinics in South East Queensland, Australia.

Patient knowledge of risk factors, signs and symptoms associated with oral cancers is crucial for increasing the likelihood of patient presentation for opportunistic screening and reducing delay in patient appraisal for early detection. This study aimed to assess the knowledge of oral cancer and to ascertain socio-demographic factors that influence knowledge amongst adult dental patients attending public clinics in Brisbane, Australia. A convenience sample of 213 adult dental patients who attended the Herston and Stafford public health clinics in Brisbane, Australia, between July and August 2019 participated in the self-administered questionnaire. Multivariate analyses were performed to identify predictors for oral cancer knowledge. Patients were well informed of smoking as a risk factor (n = 135; 84.4%), whereas only 53.8% (n = 82) of participants agreed that heavy alcohol consumption was a risk factor. A larger proportion of participants identified difficulty of moving the tongue (n = 79; 49.4%) and pain on swallowing (n = 72; 45.0%) compared to the proportion who identified fixed red patches (n = 61; 38.1%) and fixed white patches (n = 57; 35.6%) as a sign or symptom. Education level and gender were significant knowledge predictors for alcohol (p = 0.01), old age (p = 0.008) and family history (p = 0.004) as a risk factors for oral cancer. Those with a family history of cancer were more likely to identify a red patch (p = 0.02), bleeding gums (p = 0.001) and altered sensation (p = 0.023) as a sign or symptom of oral cancer. Overall, patient knowledge was greater for risk factors than for signs and symptoms for oral cancer. Symptoms associated with later stages of cancer were recognised by a greater proportion of patients compared to early stages of oral cancer. These results indicate the need for targeted public health initiatives to improve patient knowledge.

A Toughening and Anti-Counterfeiting Benzotriazole-Based High-Performance Polymer Film Driven by Appropriate Intermolecular Coordination Force.

It is of great significance to circumvent the inherent trade-off between strength and extensibility for epoxy resins. Herein dynamic Cu-benzotriazole cross-links are incorporated, as the appropriate intermolecular coordination interaction, into high performance epoxy networks, and the resulting epoxy resins exhibits outstanding thermal stability and mechanical properties, their strength and extensibility are simultaneously improved. Additionally, local manipulation of coordination crosslinking confers the film with anti-counterfeiting function.

Treatment Outcomes of Pulpectomy in Primary Maxillary Incisors Filled with ZOE and Metapex: A Two-year Retrospective Study.

OBJECTIVES: To address a literature gap by evaluating, in a larger set of samples, the clinical and radiographic outcomes of pulpectomy in primary maxillary incisors using ZOE and calcium hydroxide/iodoform paste. To also identify the predisposing factors for treatment outcomes. STUDY DESIGN: Medical charts of 124 patients (aged 16 to 60 months) and radiographs of their incisors (309 incisors) were reviewed (128 with ZOE and 181 with Metapex). All incisors were restored with composite resin crowns. RESULTS: The radiographic success rates for ZOE and Metapex were: 85.9% and 82.9% at the 12-month recall, and 69.2% and 64% at the 24-month recall, with no statistically significant difference between the two groups. Clinical failures occurred more frequently in the Metapex group (P = 0.006), as clinical signs of pain and soft tissue pathosis were found in 6.2% of the Metapex cases at 24 months but none in the ZOE group. Significant predisposing factors for radiographic success were type of tooth, degree of obturation at recalls, and preoperative root resorption. CONCLUSIONS: The radiographic success rates are comparable between the ZOE and Metapex groups. Clinical pathological manifestations such as pain and soft tissue pathosis are seen in the Metapex group at recalls, but none in the ZOE group. Predisposing factors such as type of incisor, preoperative root resorption, and extent of filling at recalls are associated with the radiographic success rate.

Ultrasensitive determination of organotin compounds in plastic food packaging and edible oils by sheathless capillary electrophoresis-electrospray ionization-mass spectrometry.

The determination of trace-amount organotins in plastic food packaging materials is of great significance in food safety. However, due to the complexity of organotins and sample treatment processes, it is still a challenging task. Here, we report a method for the sensitive and simultaneous determination of organotins in plastic food packaging materials and edible oils, by utilizing sheathless capillary electrophoresis-electrospray ionization-mass spectrometry. The method of sample pretreatment with ultrasonic extraction and solid phase extraction is used to eliminate interference. The results showed low limits of detection (LODs) of 2 pg mL-1-50 pg mL-1 and excellent inter/intra-day repeatability. Good average recoveries in the range of 80.27% to 108.52% were obtained at three spiked concentrations, with a relative standard deviation less than 8.71%. The successful simultaneous determination of the target analytes will pave the way for further assessment of contamination and migration behaviour of organotins from packaging materials to food, which is of great significance for evaluating and controlling food safety.