Proteomic Analysis of Human Saliva via Solid-Phase Microextraction Coupled with Liquid Chromatography-Mass Spectrometry.

Proteomics of human saliva samples was achieved for the first time via biocompatible solid-phase microextraction (bio-SPME) devices. Upon introduction of a porogen to a conventional C18 coating, porous C18/polyacrylonitrile (PAN) SPME blades were able to extract peptides up to 3.0 kDa and more peptides than commercial SPME blades. Following Trypsin digestion, salivary proteomic analysis was achieved via SPME-LC-MS/MS. Seven endogenous proteins were consistently identified in all saliva samples via bio-SPME. Taking advantage of this strategy, untargeted peptidomics was applied for the comparison of saliva samples between healthy and SARS-CoV-2 positive individuals. The results showed clear peptidomic differences between the viral and healthy saliva samples. This proof-of-concept study demonstrates the potential of bio-SPME-LC-MS/MS for peptidomics and proteomics in biomedical applications.

Abnormal amyloid precursor protein processing in periodontal tissue in a murine model of periodontitis induced by Porphyromonas gingivalis.

OBJECTIVE: The study aimed to investigate the change of amyloid precursor protein (APP) processing and amyloid ß (Aß) metabolites in linking periodontitis to Alzheimer's disease (AD). BACKGROUND: Aß is one of the main pathological features of AD, and few studies have discussed changes in its expression in peripheral tissues or analyzed the relationship between the peripheral imbalance of Aß production and clearance. METHODS: A murine model of periodontitis was established by oral infection with Porphyromonas gingivalis (P. gingivalis). Micro-computed tomography (Micro-CT) was used to observe the destruction of the alveolar bone. Nested quantitative polymerase chain reaction (qPCR) was used to measure small quantities of P.gingivalis DNA in different tissues. Behavioral experiments were performed to measure cognitive function in the mice. The mRNA levels of TNF-α, IL-6, IL-8, RANKL, OPG, APP695, APP751, APP770, and BACE1 in the gingival tissues or cortex were detected by RT-PCR. The levels of Aß1-40 and Aß1-42 in gingival crevicular fluid (GCF) and plasma were tested by ELISA. RESULTS: P. gingivalis oral infection was found to cause alveolar bone resorption and impaired learning and memory. P.gingivalis DNA was detected in the gingiva, blood and cortex of the P.gingivalis group by nested qPCR (p < .05). The mRNA expression of TNF-α, IL-6, IL-8, RANKL/OPG, and BACE1 in the gingival tissue was significantly higher than that in the control group (p < .05). Similarly, upregulated mRNA levels of APP695 and APP770 were observed in the gingival tissuses and cortex of the P. gingivalis group (p < .05). The levels of Aß1-40 and Aß1-42 in the GCF and plasma of the P. gingivalis group were significantly higher than those in the control group (p < .05). CONCLUSION: P. gingivalis can directly invade the brain via hematogenous infection. The invasion of P. gingivalis could trigger an immune response and lead to an imbalance between Aß production and clearance in peripheral tissues, which may trigger an abnormal Aß metabolite in the brain, resulting in the occurrence and development of AD.

Evidence of microbiota-host dysbiosis between periodontitis and cerebral small vessel disease.

OBJECTIVES: To investigate the correlation between periodontitis and cerebral small vessel disease (CSVD) from the clinical and microbiological aspects. SUBJECTS AND METHODS: Periodontitis patients (CP group, n = 31) and CSVD patients (CSVD group, n = 30) were examined for neurological and periodontal condition. Subgingival plaque was collected and performed using 16S rRNA sequencing. Logistic regression and LASSO regression were used to analyze the periodontal parameters and subgingival microbiota related to CSVD, respectively. Inflammatory factors in gingival crevicular fluid (GCF) were also detected and compared between the two groups. RESULTS: Clinical attachment level (CAL), teeth number and plaque index demonstrated a significant difference between CP and CSVD group, meanwhile, CAL was independently associated with CSVD. Besides, the microbial richness and composition were distinct between two groups. Five genera related to periodontal pathogens (Treponema, Prevotella, Streptococcus, Fusobacterium, Porphyromonas) were screened out by LASSO regression, suggesting a potential association with CSVD. Finally, the levels of inflammatory factors in GCF were statistically higher in CSVD group than those in CP group. CONCLUSIONS: Cerebral small vessel disease patients demonstrated worse periodontal condition, meanwhile the interaction between microbiota dysbiosis and host factors (inflammation) leading to a better understanding of the association between periodontitis and CSVD.

Porphyromonas gingivalis LPS-stimulated BMSC-derived exosome promotes osteoclastogenesis via miR-151-3p/PAFAH1B1.

OBJECTIVES: Porphyromonas gingivalis-LPS regulated bone metabolism by triggering dysfunction of osteoblasts directly, and affecting activity of osteoclasts through intracellular communication. Exosome, as the mediator of intercellular communication, was important vesicle to regulate osteogenesis and osteoclastogenesis. This research was designed for investigating the mechanism of BMSCs-EXO in modulating osteoclastic activity under the P. gingivalis-LPS. MATERIALS AND METHODS: The cytotoxicity and osteogenic effects of P. gingivalis-LPS on BMSCs was evaluated, and then osteoclastic activity of RAW264.7 co-cultured with exosomes was detected. Besides, Affymetrix miRNA array and luciferase reporter assay were used to identify the target exosomal miRNA signal pathway. RESULTS: BMSCs' osteogenic differentiation and proliferation were decreased under 1 and 10 µg/mL P. gingivalis-LPS. Osteoclastic-related genes and proteins levels were promoted by P. gingivalis-LPS-stimulated BMSCs-EXO. Based on the miRNA microarray analysis, exosomal miR-151-3p was lessened in BMExo-LPS group, which facilitated osteoclastic differentiation through miR-151-3p/PAFAH1B1. CONCLUSIONS: Porphyromonas gingivalis-LPS could regulated bone metabolism by inhibiting proliferation and osteogenesis of BMSCs directly. Also, P. gingivalis-LPS-stimulated BMSCs-EXO promoted osteoclastogenesis via activating miR-151-3p/PAFAH1B1 signal pathway.

Indoxyl sulfate exacerbates alveolar bone loss in chronic kidney disease through ferroptosis.

OBJECTIVES: The purpose of this study was to determine whether indoxyl sulfate (IS) is involved in alveolar bone deterioration and to elucidate the mechanism underlying alveolar bone loss in chronic kidney disease (CKD) patients. MATERIALS AND METHODS: Mice were divided into the control group, CP group (ligature-induced periodontitis), CKD group (5/6 nephrectomy), and CKD + CP group. The concentration of IS in the gingival crevicular fluid (GCF) was determined by HPLC. The bone microarchitecture was evaluated by micro-CT. MC3T3-E1 cells were stimulated with IS, and changes in mitochondrial morphology and ferroptosis-related factors were detected. RT-PCR, western blotting, alkaline phosphatase activity assays, and alizarin red S staining were utilized to assess how IS affects osteogenic differentiation. RESULTS: Compared with that in the other groups, alveolar bone destruction in the CKD + CP group was more severe. IS accumulated in the GCF of mice with CKD. IS activated the aryl hydrocarbon receptor (AhR) in vitro, inhibited MC3T3-E1 cell osteogenic differentiation, caused changes in mitochondrial morphology, and activated the SLC7A11/GPX4 signaling pathway. An AhR inhibitor attenuated the aforementioned changes induced by IS. CONCLUSIONS: IS activated the AhR/SLC7A11/GPX4 signaling pathway, inhibited osteogenesis in MC3T3-E1 cells, and participated in alveolar bone resorption in CKD model mice through ferroptosis.

Hyperbranched Polymer Dots with Strong Absorption and High Fluorescence Quantum Yield for In Vivo NIR-II Imaging.

In order to improve the fluorescence quantum yield (QY) of NIR-II-emitting nanoparticles, D-A-D fluorophores are typically linked to intramolecular rotatable units to reduce aggregation-induced quenching. However, incorporating such units often leads to a twisted molecular backbone, which affects the coupling within the D-A-D unit and, as a result, lowers the absorption. Here, we overcome this limitation by cross-linking the NIR-II fluorophores to form a 2D polymer network, which simultaneously achieves a high QY by well-controlled fluorophore separation and strong absorption by restricting intramolecular distortion. Using the strategy, we developed polymer dots with the highest NIR-II single-particle brightness among reported D-A-D-based nanoparticles and applied them for imaging of hindlimb vasculatures and tumors as well as fluorescence-guided tumor resection. The high brightness of the polymer dots offered exceptional image quality and excellent surgical results, showing a promising performance for these applications.

High-Throughput and Rapid Screening of Drugs of Abuse in Saliva by Multi-Segment Injection Using Solid-Phase Microextraction-Automated Microfluidic Open Interface-Mass Spectrometry.

There is great demand for analytical methods capable of providing high-throughput and rapid screening, especially for anti-doping and clinical point-of-care applications. In this work, automated microfluidic open interface-mass spectrometry (MOI-MS) was used for coupling with high-throughput, automated solid-phase microextraction (SPME) to achieve this objective. The design of the MOI-MS interface provides a continuous and stable electrospray fluid flow to the MS without introducing any bubble, a feature that we exploit to introduce the concept of multi-segment injection for the determination of multiple samples in a single MS run. By eliminating the need to start a new MS run between sample assays, the developed approach provides significantly simplified protocols controlled by programmed software and increased reproducibility. Furthermore, the biocompatible SPME device, which utilizes coating consisting of hydrophilic-lipophilic balanced particles embedded in a polyacrylonitrile (PAN) binder, can be directly used for biological sample analysis, as the PAN acts as both a binder and a matrix-compatible barrier, thus enabling the enrichment of small molecules while eliminating interferences associated with the presence of interfering macromolecules. The above design was employed to develop a fast, quantitative method capable of analyzing drugs of abuse in saliva samples in as little as 75 s per sample. The findings indicate that the developed method provides good analytical performance, with limits of detection ranging between 0.05 and 5 ng/mL for analysis of 16 drugs of abuse, good calibration linear correlation coefficients (R2 ≥ 0.9957), accuracy between 81 and 120%, and excellent precision (RSD% < 13%). Finally, a proof-of-concept experiment was performed to demonstrate the method's suitability for real-time analysis in anti-doping applications.

NIR-II Imaging-Guided Mitochondrial-Targeting Organic Nanoparticles for Multimodal Synergistic Tumor Therapy.

Effectively interfering energy metabolism in tumor cells and simultaneously activating the in vivo immune system to perform immune attacks are meaningful for tumor treatment. However, precisely targeted therapy is still a huge challenge. Herein, a mitochondrial-targeting phototheranostic system, FE-T nanoparticles (FE-T NPs) are developed to damage mitochondria in tumor cells and change the tumor immunosuppressive microenvironment. FE-T NPs are engineered by encapsulating the near-infrared (NIR) absorbed photosensitizer IR-FE-TPP within amphiphilic copolymer DSPE-SS-PEG-COOH for high-performing with simultaneous mitochondrial-targeting, near-infrared II (NIR-II) fluorescence imaging, and synchronous photothermal therapy (PTT) /photodynamic therapy (PDT) /immune therapy (IMT). In tumor treatment, the disulfide in the copolymer can be cleaved by excess intracellular glutathione (GSH) to release IR-FE-TPP and accumulate in mitochondria. After 808 nm irradiation, the mitochondrial localization of FE-T NPs generated reactive oxygen species (ROS), and hyperthermia, leading to mitochondrial dysfunction, photoinductive apoptosis, and immunogenic cell death (ICD). Notably, in situ enhanced PDT/PTT in vivo via mitochondrial-targeting with FE-T NPs boosts highly efficient ICD toward excellent antitumor immune response. FE-T NPs provide an effective mitochondrial-targeting phototheranostic nanoplatform for imaging-guided tumor therapy.

Efficacy and safety of a nanoparticle therapeutic vaccine in patients with chronic hepatitis B: A randomized clinical trial.

BACKGROUND AND AIM: HBV DNA can be reduced using antiviral drugs in patients with chronic hepatitis B (CHB); however, the rate of HBeAg seroconversion remains low. A clinical trial was conducted to assess the efficacy and safety of a de novo designed liposome-based nanoparticle lipopeptide vaccine, εPA-44, for CHB. APPROACH AND RESULTS: A two-stage phase 2 trial, which included a 76-week, randomized, double-blind, placebo-controlled trial (stage 1) and a 68-week open-label extension (stage 2), was conducted in 15 centers across China (Clinicaltrials.gov No. NCT00869778). In stage 1, 360 human leukocyte antigen A2 (HLA-A2)-positive and HBeAg-positive patients were randomly and equally distributed to receive six subcutaneous injections of 600 µg or 900 µg εPA-44 or placebo at week 0, 4, 8, 12, 20, and 28. In stage 2, 183 patients received extended 900 µg εPA-44, and 26 patients were observed for relapse without further treatment. The primary endpoint was the percentage of patients with HBeAg seroconversion at week 76. At week 76, patients receiving 900 µg εPA-44 achieved significantly higher HBeAg seroconversion rate (38.8%) versus placebo (20.2%) (95% CI, 6.9-29.6%; p = 0.002). With a combined endpoint of HBeAg seroconversion, alanine aminotransferase normalization and HBV DNA < 2,000 IU/mL, both 900 µg (18.1%) and 600 µg (14.3%), resulted in significantly higher rate versus placebo (5.0%) (p = 0.002 and p = 0.02, respectively) at week 76. In stage 2, none (0 of 20) of 900 µg εPA-44-treated patients experienced serologic relapse. The safety profile of εPA-44 was comparable to that of placebo. CONCLUSIONS: Among HLA-A2-positive patients with progressive CHB, a finite duration of 900 µg εPA-44 monotherapy resulted in significantly higher HBeAg seroconversion rate than placebo and sustained off-treatment effect. A phase 3 trial is ongoing (ChiCTR2100043708).

3D-printed titanium surgical guides for extraction of horizontally impacted lower third molars.

OBJECTIVES: This prospective study introduced a digitally designed sectioning guide and evaluated its feasibility for the extraction of horizontally impacted lower third molars. MATERIALS AND METHODS: This study included 38 horizontally impacted lower third molars, randomly divided into experimental and control groups. The teeth were extracted using a 3D-printed titanium surgical guide in the experimental group; free-hand extractions were performed in the control group. The surgical duration, tooth sectioning duration, cortical bone perforation, and postoperative complications, including pain, swelling, trismus, dry socket, infection, and hemorrhage, were evaluated. RESULTS: Although not statistically significant, guided surgery tended to reduce the number of tooth sectioning steps compared to free-hand extractions. There were no cases of cortical bone perforation in the experimental group. Although the surgical duration was greater in the experimental group (p < 0.05), there were no differences in postoperative pain, swelling, and trismus. There were no cases of postoperative infection and hemorrhage in either group. CONCLUSIONS: 3D-printed titanium surgical guides had superior accuracy and safety compared to free-hand surgery. Further studies with larger sample sizes are required to verify these findings. CLINICAL RELEVANCE: The template improved the safety of tooth sectioning during impacted lower third molar surgery and resulted in a more predictable extraction. The narrow sectioning groove could fit comfortably with hypertrophic soft tissues in the posterior mandible.

Gravity-driven membrane coupled with oxidation technology to modify the surface properties and biofilm formation: Biofouling mitigation.

Biofilms caused by biological fouling play an essential role in gravity-driven membranes' (GDMs) flux decline and rejection rate. The effects of ozone, permanganate, and ferrate (VI) in-situ pretreatment on membrane properties and biofilm formation were systematically studied. Due to the selective retention and adsorption of algal organic matter by biofilms and oxidative degradation, the rejection efficiency of dissolved organic carbon (DOC) in algae-laden water pretreated with permanganate by GDM was up to 23.63%. Pre-oxidation extraordinarily postponed flux decline and biofilm formation of GDM and reduced membrane fouling. The total membrane resistance decreased by 87.22%-90.30% within 72 h after pre-ozonation. Permanganate was more effective than ozone and ferrate (VI) in alleviating secondary membrane fouling caused by algal cells destroyed by pre-oxidation. Extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory revealed that the distribution of electrostatic force (EL), acid-base (AB), and Lifshitz-van der Waals forces (LW) interactions between M. aeruginosa and the released intracellular algogenic organic matter (IOM) and ceramic membrane surface was similar. The membrane and foulants are always attracted to each other by LW interaction at different separation distances. The dominant fouling mechanism of GDM combined with pre-oxidation technology shifts from complete pore blocking to cake layer filtration during operation. After pre-oxidation of algae-laden water by ozone, permanganate, and ferrate (VI), GDM can treat at least 131.8%, 37.0%, and 61.5% more feed solution before forming a complete cake layer. This study provides new insights into the biological fouling control strategies and mechanisms for GDM coupled with oxidation technology, which is expected to alleviate membrane fouling and optimize the feed liquid pretreatment procedure.

Integrated metabolomic and transcriptomic analyses of regulatory mechanisms associated with uniconazole-induced dwarfism in banana.

BACKGROUND: Uniconazole is an effective plant growth regulator that can be used in banana cultivation to promote dwarfing and enhance lodging resistance. However, the mechanisms underlying banana dwarfing induced by uniconazole are unknown. In uniconazole-treated bananas, gibberellin (GA) was downregulated compared to the control groups. An integrative analysis of transcriptomes and metabolomes was performed on dwarf bananas induced by uniconazole and control groups. The key pathways involved in uniconazole-induced dwarfism in banana were determined according to the overlap of KEGG annotation of differentially expressed genes and (DEGs) differential abundant metabolites (DAMs). RESULTS: Compared with the control groups, the levels of some flavonoids, tannins, and alkaloids increased, and those of most lipids, amino acids and derivatives, organic acids, nucleotides and derivatives, and terpenoids decreased in uniconazole-treated bananas. Metabolome analysis revealed the significant changes of flavonoids in uniconazole-treated bananas compared to control samples at both 15 days and 25 days post treatment. Transcriptome analysis shows that the DEGs between the treatment and control groups were related to a series of metabolic pathways, including lignin biosynthesis, phenylpropanoid metabolism, and peroxidase activity. Comprehensive analysis of the key pathways of co-enrichment of DEGs and DAMs from 15 d to 25 d after uniconazole treatment shows that flavonoid biosynthesis was upregulated. CONCLUSIONS: In addition to the decrease in GA, the increase in tannin procyanidin B1 may contribute to dwarfing of banana plants by inhibiting the activity of GA. The increased of flavonoid biosynthesis and the change of lignin biosynthesis may lead to dwarfing phenotype of banana plants. This study expands our understanding of the mechanisms underlying uniconazole-induced banana dwarfing.

Microporous Multiresonant Plasmonic Meshes by Hierarchical Micro-Nanoimprinting for Bio-Interfaced SERS Imaging and Nonlinear Nano-Optics.

Microporous mesh plasmonic devices have the potential to combine the biocompatibility of microporous polymeric meshes with the capabilities of plasmonic nanostructures to enhance nanoscale light-matter interactions for bio-interfaced optical sensing and actuation. However, scalable integration of dense and uniformly structured plasmonic hotspot arrays with microporous polymeric meshes remains challenging due to the processing incompatibility of conventional nanofabrication methods with flexible microporous substrates. Here, scalable nanofabrication of microporous multiresonant plasmonic meshes (MMPMs) is achieved via a hierarchical micro-/nanoimprint lithography approach using dissolvable polymeric templates. It is demonstrated that MMPMs can serve as broadband nonlinear nanoplasmonic devices to generate second-harmonic generation, third-harmonic generation, and upconversion photoluminescence signals with multiresonant plasmonic enhancement under fs pulse excitation. Moreover, MMPMs are employed and explored as bio-interfaced surface-enhanced Raman spectroscopy mesh sensors to enable in situ spatiotemporal molecular profiling of bacterial biofilm activity. Microporous mesh plasmonic devices open exciting avenues for bio-interfaced optical sensing and actuation applications, such as inflammation-free epidermal sensors in conformal contact with skin, combined tissue-engineering and biosensing scaffolds for in vitro 3D cell culture models, and minimally invasive implantable probes for long-term disease diagnostics and therapeutics.

2022 Expert consensus on the use of laser ablation for papillary thyroid microcarcinoma.

OBJECTIVE: With the aim of standardizing and improving the use of ultrasound-guided PLA on PTMC, a panel of experts from China and Italy, jointly issued this expert consensus on the clinical use of PLA for low-risk PTMC. METHODS: This expert consensus was developed by Chinese and Italian experts who have specific competence and expertise in this area. An evidence-based approach combining the knowledge and practical experience of the panelists was utilized. RESULTS: Twenty-six expert consensus recommendations were developed, spanning topics including the indications and contraindications of PLA for PTMC, physician training, preoperative preparation of patients, intraoperative technical procedures, possible complications, efficacy assessment, follow-up strategy, the approach to new PTMC and metastatic lymph nodes after treatment, thyroid-stimulating hormone inhibition therapy, and quality control of the entire procedure. CONCLUSION: We summarized practical recommendations about standardized and improved PLA treatment for PTMC.

Environment-friendly bio-based controlled-release phosphate fertilizer with waste kitchen oil as coating material: Preparation, characterization, and mechanisms.

Recently, Bio-based polyurethane controlled-release fertilizers (BPCF) have been developed rapidly owing to their environmental friendliness, renewability, and low cost. However, the unsatisfying controlled release prohibits their large-scale direct application in agricultural production. Here, we prepared bio-based controlled-release phosphate (P) fertilizers using harmful waste kitchen oils (WKO) as coating materials. The membrane shell surface was modified with multi-walled carbon nanotubes (CNT), and superhydrophobic controlled-release phosphorus fertilizers (SCRF) were obtained. After CNT modification, the controlled release period of SCRF was greatly improved. Phosphorus released period of SCRF reached over 67 d while that of BPCF was merely ∼49 d. Additionally, the surface energy, cracks, roughness, microstructure, cross-linking degree, etc., of the membrane shells were measured. The results showed that CNT greatly improved the hydrophobic properties of the membrane shells. The findings indicated the application of modified WKO with great agricultural value in preparing environment-friendly BPCFs.

Activated STAT3 signaling pathway by ligature-induced periodontitis could contribute to neuroinflammation and cognitive impairment in rats.

BACKGROUND: Increasing evidence suggests a causal link between periodontitis and cognitive disorders. Systemic inflammation initiated by periodontitis may mediate the development of cognitive impairment. Our study aims to investigate the effect of ligature-induced periodontitis on cognitive function and the role of signal transducers and activators of transcription 3 (STAT3) in this process. MATERIALS AND METHODS: Ligature-induced periodontitis was established, and the rats were treated intraperitoneally with/without the pSTAT3 inhibitor cryptotanshinone (CTS). Alveolar bone resorption and periodontal inflammation were detected by micro-computed tomography analysis and histopathological evaluation. Locomotor activity and cognitive function were evaluated by the open field test and the Morris water maze test, respectively. The activation of microglia and astrocytes in the hippocampus and cortex was assessed by immunohistochemistry (IHC). The expression of interleukins (IL-1ß, IL-6, IL-8, IL-21) in both the periphery and cortex was evaluated by RT-PCR and ELISA. The expression of TLR/NF-κB and ROS cascades was evaluated by RT-PCR. The expression of pSTAT3 and the activation of the STAT3 signaling pathway (JAK2, STAT3, and pSTAT3) in the periodontal tissue and cortex were assessed by IHC and Western blot. The expression of amyloid precursor protein (APP) and its key secretases was evaluated by RT-PCR. The level of amyloid ß-protein (Aß) and the ratio of Aß1-40/1-42 were measured via ELISA in the plasma and cortex while IHC was used to detect the level of Aß1-42 in the brain. RESULTS: In periodontal ligature rats, significant alveolar bone resorption and local inflammatory cell infiltration were present. Apparent increases in inflammatory cytokines (IL-1ß, IL-6, IL-8, and IL-21) were detected in peripherial blood and brain. Additionally, spatial learning and memory ability was impaired, while locomotor activity was not affected. Activated microglia and astrocytes were found in the cortex and hippocampus, presenting as enlarged cell bodies and irregular protrusions. Levels of TLR/NF-kB, PPAR and ROS were altered. The STAT3 signaling pathway was activated in both the periodontal tissue and cortex, and the processing of APP by ß- and γ-secretases was promoted. The changes mentioned above could be relieved by the pSTAT3 inhibitor CTS. CONCLUSIONS: Ligature-induced periodontitis in rats resulted in systemic inflammation and further abnormal APP processing, leading to cognitive impairments. In this progress, the activation of the STAT3 signaling pathway may play an important role by increasing inflammatory load and promoting neuroinflammation.

Profiles of neonicotinoid insecticides and their metabolites in paired saliva and periodontal blood samples in human from South China: Association with oxidative stress markers.

Neonicotinoid insecticides (NEOs) are widely used around the world. The distribution of NEOs in paired saliva and periodontal blood samples was not previously documented in China. In this study, the concentrations of six NEOs and three corresponding metabolites were measured in 188 paired saliva and periodontal blood samples collected from South China. NEOs and their metabolites were frequently detected (68-94%) in paired saliva and periodontal blood, with median levels of 0.01-0.99 ng/mL. 1-Methyl-3-(tetrahydro-3-furylmethyl) urea was the most predominant NEO in paired saliva (39%) and periodontal blood (42%). Gender-related differences in NEOs and their metabolite concentrations were found: males showed lower levels than females. We calculated the concentration ratios between saliva and periodontal blood (S/PB ratios), and found that the median S/PB ratios of NEO and their metabolites were higher than 1, indicating that NEOs and their metabolites were easily excreted via saliva. 8-Hydroxy-2'-deoxyguanosine (8-OHdG) was measured in paired saliva and periodontal blood as a marker of oxidative stress. 8-OHdG concentrations in saliva and periodontal blood were significantly and positively correlated (p < 0.05) with the concentrations of most NEOs and their metabolites in saliva and periodontal blood samples. These findings indicated that exposure to NEOs and their metabolites is associated with oxidative stress. This study is the first to report NEOs and their metabolites in paired saliva and periodontal blood samples collected from South China.

Finite Element Analysis of Two- and Three-Dimensional Fixation in Treating Mandibular Symphyseal Fracture Combined With Bilateral Condylar Intracapsular Fractures.

ABSTRACT: The aim of this study was to compare through finite element analysis two- and three-dimensional (2D and 3D) fixation in the treatment of mandibular symphyseal fracture combined with bilateral condylar intracapsular fractures. The authors created 2 fixation models for the above fracture, and analyzed the stress and displacement in the mandible and fixation materials under 3 loading conditions. The von Mises stress of the mandible and plates peaked during lateral occlusion, and was lowest during central occlusion. In all conditions, stresses in the fixation materials did not exceed the yield stress of titanium. The inferior border of the symphyseal fracture segments showed opposing displacements, and the mandible tended to widen in the 2D fixation model. However, the fracture displacement did not exceed 150 µm for either fixation method. The results suggested that after well reduction and fixation of condylar intracapsular fractures, either 2D or 3D fixation for symphyseal fracture can provide adequately strong fixation. Compared with 2D fixation, 3D fixation has more advantages in controlling the mandibular width and preventing the fixation materials from enduring excessive stress.

3D-Printed Nanocellulose-Based Cushioning-Antibacterial Dual-Function Food Packaging Aerogel.

Cushioning and antibacterial packaging are the requirements of the storage and transportation of fruits and vegetables, which are essential for reducing the irreversible quality loss during the process. Herein, the composite of carboxymethyl nanocellulose, glycerin, and acrylamide derivatives acted as the shell and chitosan/AgNPs were immobilized in the core by using coaxial 3D-printing technology. Thus, the 3D-printed cushioning-antibacterial dual-function packaging aerogel with a shell-core structure (CNGA/C-AgNPs) was obtained. The CNGA/C-AgNPs packaging aerogel had good cushioning and resilience performance, and the average compression resilience rate was more than 90%. Although AgNPs was slowly released, CNGA/C-AgNPs packaging aerogel had an obvious antibacterial effect on E. coli and S. aureus. Moreover, the CNGA/C-AgNPs packaging aerogel was biodegradable. Due to the customization capabilities of 3D-printing technology, the prepared packaging aerogel can be adapted to more application scenarios by accurately designing and regulating the microstructure of aerogels, which provides a new idea for the development of food intelligent packaging.

The Formation of Chitosan-Coated Rhamnolipid Liposomes Containing Curcumin: Stability and In Vitro Digestion.

There is growing interest in developing biomaterial-coated liposome delivery systems to improve the stability and bioavailability of curcumin, which is a hydrophobic nutraceutical claimed to have several health benefits. The curcumin-loaded rhamnolipid liposomes (Cur-RL-Lips) were fabricated from rhamnolipid and phospholipids, and then chitosan (CS) covered the surface of Cur-RL-Lips by electrostatic interaction to form CS-coated Cur-RL-Lips. The influence of CS concentration on the physical stability and digestion of the liposomes was investigated. The CS-coated Cur-RL-Lips with RL:CS = 1:1 have a relatively small size (412.9 nm) and positive charge (19.7 mV). The CS-coated Cur-RL-Lips remained stable from pH 2 to 5 at room temperature and can effectively slow the degradation of curcumin at 80 °C; however, they were highly unstable to salt addition. In addition, compared with Cur-RL-Lips, the bioavailability of curcumin in CS-coated Cur-RL-Lips was relatively high due to its high transformation in gastrointestinal tract. These results may facilitate the design of a more efficacious liposomal delivery system that enhances the stability and bioavailability of curcumin in nutraceutical-loaded functional foods and beverages.