Amyloid-like amelogenin nanoribbons template mineralization via a low-energy interface of ion binding sites.

Protein scaffolds direct the organization of amorphous precursors that transform into mineralized tissues, but the templating mechanism remains elusive. Motivated by models for the biomineralization of tooth enamel, wherein amyloid-like amelogenin nanoribbons guide the mineralization of apatite filaments, we investigated the impact of nanoribbon structure, sequence, and chemistry on amorphous calcium phosphate (ACP) nucleation. Using full-length human amelogenin and peptide analogs with an amyloid-like domain, films of ß-sheet nanoribbons were self-assembled on graphite and characterized by in situ atomic force microscopy and molecular dynamics simulations. All sequences substantially reduce nucleation barriers for ACP by creating low-energy interfaces, while phosphoserines along the length of the nanoribbons dramatically enhance kinetic factors associated with ion binding. Furthermore, the distribution of negatively charged residues along the nanoribbons presents a potential match to the Ca­Ca distances of the multi-ion complexes that constitute ACP. These findings show that amyloid-like amelogenin nanoribbons provide potent scaffolds for ACP mineralization by presenting energetically and stereochemically favorable templates of calcium phosphate ion binding and suggest enhanced surface wetting toward calcium phosphates in general.

New Avenues for Capturing Mineralization Events at Biomaterial Interfaces with Liquid-Transmission Electron Microscopy.

Liquid-transmission electron microscopy (liquid-TEM) provides exciting potential for capturing mineralization events at biomaterial interfaces, though it is largely unexplored. To address this, we established a unique approach to visualize calcium phosphate (CaP)-titanium (Ti) interfacial mineralization events by combining the nanofabrication of Ti lamellae by focused ion beam with in situ liquid-TEM. Multiphasic CaP particles were observed to nucleate, adhere, and form different assemblies onto and adjacent to Ti lamellae. Here, we discuss new approaches for exploring the interaction between biomaterials and liquids at the nanoscale. Driving this technology is crucial for understanding and controlling biomineralization to improve implant osseointegration and direct new pathways for mineralized tissue disease treatment in the future.

Journey of Mineral Precursors in Bone Mineralization: Evolution and Inspiration for Biomimetic Design.

Bone mineralization is a ubiquitous process among vertebrates that involves a dynamic physical/chemical interplay between the organic and inorganic components of bone tissues. It is now well documented that carbonated apatite, an inorganic component of bone, is proceeded through transient amorphous mineral precursors that transforms into the crystalline mineral phase. Here, the evolution on mineral precursors from their sources to the terminus in the bone mineralization process is reviewed. How organisms tightly control each step of mineralization to drive the formation, stabilization, and phase transformation of amorphous mineral precursors in the right place, at the right time, and rate are highlighted. The paradigm shifts in biomineralization and biomaterial design strategies are intertwined, which promotes breakthroughs in biomineralization-inspired material. The design principles and implementation methods of mineral precursor-based biomaterials in bone graft materials such as implant coatings, bone cements, hydrogels, and nanoparticles are detailed in the present manuscript. The biologically controlled mineralization mechanisms will hold promise for overcoming the barriers to the application of biomineralization-inspired biomaterials.

VMT/ACP/Dextran composite nanosheets against dental caries through promoting mineralization of dentin tubules, pH buffering, and antibacterial.

Dental caries is a worldwide public healthcare concern, and is closely related to the acidic environment that caused by bacterial decomposition of food. In this study, a two-step ion exchange liquid-phase stripping method was applied to strip out vermiculite (VMT) nanosheets, then amorphous calcium phosphate (ACP) and dextran were inserted between the VMT nanosheets interlayer to obtain a composite two-dimension nanosheets (VMT/ACP/Dextran). VMT/ACP/Dextran composite nanosheets exhibited excellent biocompatibility and could provide exogenous Ca2+and PO43- from ACP, provide SiO44-, Mg2+, Fe2+ and obtain buffering pH and antibacterial properties from VMT, as well as improve suspension stability and targeting Streptococcus mutans through glucan. The in vitro study showed that the composite materials could promote the mineralization and sealing of dentin tubules by releasing active ions, buffer pH 4.5 (a value close to the pH in the dental plaque environment) to pH 6.6-7.1 (values close to the pH in human saliva) through ion exchange, and exert antibacterial effects by targeting Streptococcus mutans and exerting oxidase like and peroxidase like activities to produce reactive oxygen species (ROS). The in vivo animal study showed that daily cleaning teeth using VMT/ACP/Dextran composite nanosheets could effectively reduce the incidence rate and severity of dental caries in rats. Taking together, the developed VMT/ACP/Dextran composite nanosheets, which integrated the excellent properties of VMT, ACP and dextran, can effectively prevent dental caries through a combination of factors such as buffering acids, antibacterial properties, and promoting calcification, and may be used as an active ingredient for daily oral hygiene or filling materials to prevent and treat dental caries.

Magnesium malate-modified calcium phosphate bone cement promotes the repair of vertebral bone defects in minipigs via regulating CGRP.

Active artificial bone substitutes are crucial in bone repair and reconstruction. Calcium phosphate bone cement (CPC) is known for its biocompatibility, degradability, and ability to fill various shaped bone defects. However, its low osteoinductive capacity limits bone regeneration applications. Effectively integrating osteoinductive magnesium ions with CPC remains a challenge. Herein, we developed magnesium malate-modified CPC (MCPC). Incorporating 5% magnesium malate significantly enhances the compressive strength of CPC to (6.18 ± 0.49) MPa, reduces setting time and improves disintegration resistance. In vitro, MCPC steadily releases magnesium ions, promoting the proliferation of MC3T3-E1 cells without causing significant apoptosis, proving its biocompatibility. Molecularly, magnesium malate prompts macrophages to release prostaglandin E2 (PGE2) and synergistically stimulates dorsal root ganglion (DRG) neurons to synthesize and release calcitonin gene-related peptide (CGRP). The CGRP released by DRG neurons enhances the expression of the key osteogenic transcription factor Runt-related transcription factor-2 (RUNX2) in MC3T3-E1 cells, promoting osteogenesis. In vivo experiments using minipig vertebral bone defect model showed MCPC significantly increases the bone volume fraction, bone density, new bone formation, and proportion of mature bone in the defect area compared to CPC. Additionally, MCPC group exhibited significantly higher levels of osteogenesis and angiogenesis markers compared to CPC group, with no inflammation or necrosis observed in the hearts, livers, or kidneys, indicating its good biocompatibility. In conclusion, MCPC participates in the repair of bone defects in the complex post-fracture microenvironment through interactions among macrophages, DRG neurons, and osteoblasts. This demonstrates its significant potential for clinical application in bone defect repair.

Combined Casein Phosphopeptide-Amorphous Calcium Phosphate and Fluoride Is Not Superior to Fluoride Alone in Early Carious Lesions: A Meta-Analysis.

There is a growing need for effective methods in the management of early stage carious lesions. Therefore, the aim of this study was to evaluate the effect of combined casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) and fluoride on white spot lesions (WSLs) compared to fluoride-only interventions. This meta-analysis was performed according to PRISMA guidelines and registered in PROSPERO (CRD42021286245). The Medline, Embase, and Cochrane Central databases were searched until October 17, 2022. Eligible studies were randomized controlled trials. Outcome variables included laser fluorescence (LF), quantitative light-induced fluorescence (QLF), and lesion area scores. The random-effects model was used for analysis, and results were given as standardized mean difference (SMD) and mean difference (MD) with a 95% confidence interval. Risk of bias was assessed using the RoB 2 tool, and the level of evidence with GRADE. Our systematic search yielded 973 records after duplicate removal, 21 studies were included for qualitative synthesis, and 15 studies were eligible for quantitative analysis. No significant difference was found between CPP-ACP and fluoride versus fluoride alone in LF at 1, 3, and 6 months of use: SMD -0.30 (-0.64; 0.04); SMD -0.47 (-1.02; 0.07); SMD -0.49 (-1.13; 0.15), respectively. For QLF, the analysis did not demonstrate significant differences between these two kinds of treatment at 1 and 6 months of use: MD 0.21 (-0.30;0.71); MD 0.60 (-1.70;2.90), but at 3 months, higher QLF values were found in the fluoride-only group compared to the CPP-ACP and fluoride combination was shown regarding the WSLs: MD 0.58 (0.25;0.91). On the contrary, data showed a small but statistically significant decrease in the lesion area in favor of the CPP-ACP plus fluoride versus fluoride alone at 6 months MD -0.38 (-0.72; -0.04). None of these observed changes indicated substantial clinical relevance. The combination of CPP-ACP and fluoride did not overcome the effect of fluoride given alone. Our data suggest that fluoride itself is effective in improving WSLs. However, the certainty of evidence was very low. These results indicate that further studies and future development of more effective products than CPP-ACP are needed in addition to fluoride to achieve robust amelioration of WSLs.

Implant stability and clinical outcome between implant placement using internal sinus floor elevation with alloplastic bone material grafting and without grafting: A 1-year randomized clinical trial.

OBJECTIVE: To compare implant stability and clinical outcome in implant placement between osteotome sinus floor elevation (OSFE) with biphasic calcium phosphate (BCP) which consisted of 30% of hydroxyapatite (HA) and 70% of beta-tricalcium phosphate (ß -TCP) grafting material and OSFE without using bone grafting material. The research questions is whether the BCP provides any benefit in OSFE or not. MATERIALS AND METHODS: Thirty patients (30 implants) with a single edentulous area of upper premolar or molar were randomly separated into OSFE with BCP (n = 15) and OSFE without grafting (n = 15). The patients were reevaluated 3, 6, 9, and 12 months after implant loading. The clinical assessments (implant stability quotient (ISQ), implant survival-failure rate, and surgical complication) were analyzed. Together with radiographic assessments in 2D (endo-sinus bone gain (ESBG), mean marginal bone change (MMBC)) and 3D (endo-sinus bone gain in CBCT (ESBG-CT)) were evaluated, with a mean follow-up time of at least 12 months of functional loading and prosthetic complication. RESULTS: 20 remaining implants (OSFE with BCP, n = 10; OSFE without grafting, n = 10) were analyzed. Mean ISQ was 79.18 ± 3.43 in 1-year follow-up (ISQ; OSFE with BCP = 78.72 ± 3.46, OSFE without grafting = 79.65 ± 3.52). ISQ in both groups increased steadily without significant differences in each follow-up. (p = 0.56). In radiographic evaluation, at 6-, 9-, and 12-month, OSFE without grafting group showed statistically significant lower MMBC (p < 0.05). The 1-year clinical results showed that 2 implants failed in OSFE with BCP, and 1 implant failed in OSFE without grafting. CONCLUSIONS: Graft material "BCP" (HA30:TCP70) coupled with OSFE presents no extraordinary benefit in implant stability, clinical and radiographic outcome in 1-year follow-up. CLINICAL RELEVANCE: Clinically, OSFE with grafting materials provides no additional benefit. CLINICAL TRIAL REGISTRATION NUMBER: TCTR20210517008 (date of registration: May 17, 2021).

In-vitro and in-vivo comparative studies of treatment effects on enamel demineralization during orthodontic therapy: implications for clinical early-intervention strategy.

OBJECTIVES: This study aimed to investigate if CPP-ACP / infiltrating resin was superior in treating enamel demineralization during orthodontic therapy compared with fluoride varnish, in order to provide early-intervention implications for dental professionals. MATERIALS AND METHODS: In the in-vitro study, premolars were grouped into four: remineralization with fluoride varnish / CPP-ACP, sealing with infiltrating resin, and negative control. Experimental demineralization of enamel surfaces was analyzed using techniques of QLF, SEM, EDS and micro-hardness testing. An in-vivo intervention study was conducted on patients randomly assigned into three groups. At the baseline and every-3-month follow-up, QLF parameters were compared temporally and parallelly to yield potential implications for promotion in clinical practice. RESULTS: The in-vitro study performed on 48 experimental tooth surfaces demonstrated that sealing with infiltrating resin reduced enamel surface porosity and increased surface micro-hardness significantly. In the in-vivo intervention study on 163 tooth surfaces, it was suggested that for those who meet the criteria of -10 < ΔF < -6 and - 1000 < ΔQ < -20 at the baseline, all these treatment methods could achieve acceptable outcomes; with the rising of absolute values of ΔF and ΔQ, sealing with infiltrating resin showed more evident advantages. CONCLUSION: For enamel demineralization during orthodontic therapy, all the treatment methods involved in this study showed acceptable effectiveness but had respective characteristics in treatment effects. QLF parameters could be used as indicators for clinical early-intervention strategy with regards to this clinical issue. CLINICAL RELEVANCE: With QLF parameters, clinical early-intervention strategy for enamel demineralization during orthodontic therapy could be optimized.

Biomimetic Mineral Synthesis by Nanopatterned Supramolecular-Block Copolymer Templates.

Supramolecular structures of matrix proteins in mineralizing tissues are known to direct the crystallization of inorganic materials. Here we demonstrate how such structures can be synthetically directed into predetermined patterns for which functionality is maintained. The study employs block copolymer lamellar patterns with alternating hydrophilic and hydrophobic regions to direct the assembly of amelogenin-derived peptide nanoribbons that template calcium phosphate nucleation by creating a low-energy interface. Results show that the patterned nanoribbons retain their ß-sheet structure and function and direct the formation of filamentous and plate-shaped calcium phosphate with high fidelity, where the phase, amorphous or crystalline, depends on the choice of mineral precursor and the fidelity depends on peptide sequence. The common ability of supramolecular systems to assemble on surfaces with appropriate chemistry combined with the tendency of many templates to mineralize multiple inorganic materials implies this approach defines a general platform for bottom-up-patterning of hybrid organic-inorganic materials.

Effect of Acetylsalicylic Acid on Biological Properties of Novel Cement Based on Calcium Phosphate Doped with Ions of Strontium, Copper, and Zinc.

This study aimed to compare the biological properties of newly synthesized cements based on calcium phosphate with a commercially used cement, mineral trioxide aggregate (MTA). Strontium (Sr)-, Copper (Cu)-, and Zinc (Zn)-doped hydroxyapatite (miHAp) powder was obtained through hydrothermal synthesis and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive X-ray spectrometry (EDX). Calcium phosphate cement (CPC) was produced by mixing miHAp powder with a 20 wt.% citric acid solution, followed by the assessment of its compressive strength, setting time, and in vitro bioactivity. Acetylsalicylic acid (ASA) was added to the CPC, resulting in CPCA. Biological tests were conducted on CPC, CPCA, and MTA. The biocompatibility of the cement extracts was evaluated in vitro using human dental pulp stem cells (hDPSCs) and in vivo using a zebrafish model. Antibiofilm and antimicrobial effect (quantified by CFUs/mL) were assessed against Streptococcus mutans and Lactobacillus rhamnosus. None of the tested materials showed toxicity, while CPCA even increased hDPSCs proliferation. CPCA showed a better safety profile than MTA and CPC, and no toxic or immunomodulatory effects on the zebrafish model. CPCA exhibited similar antibiofilm effects against S. mutans and L. rhamnosus to MTA.

An experimental teeth bleaching agent containing casein phosphopeptide-amorphous calcium phosphate.

OBJECTIVES: This study was aimed to obtain an experimental bleaching agent by adding casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) in order to eliminate the mineral loss on the tooth surface after bleaching and to evaluate the bleaching effectiveness. MATERIALS AND METHODS: In this study, experimental bleaching agents containing 1%, 3% CPP-ACP and without CPP-ACP were obtained. Bleaching effectiveness (color change), the effect of bleaching agents on mineral content (energy dispersive x-ray spectroscopy), surface morphology (scanning electron microscope), and surface hardness of enamel (Vicker's microhardness) before and after bleaching were evaluated. The obtained data were statistically analyzed. RESULTS: When the bleaching levels of the groups were compared, no statistically significant difference was observed between the control and 1% CPP-ACP groups (p > 0.05) while the addition of 3% CPP-ACP decreased significantly the effectiveness of the bleaching agent (p < 0.05). When the effects of experimental bleaching agents on surface hardness were examined, while the enamel surface hardness decreased statistically significantly after application in the control group (p < 0.05), no statistically significant change was observed in surface hardness after the application of 1% CPP-ACP containing bleaching agent (p > 0.05). However, a statistically significant increase was observed in surface hardness after the application of 3% CPP-ACP containing bleaching agent (p < 0.05). When the Ca and P ratio of the groups were compared, no statistically significant difference was observed between the control and 1% CPP-ACP groups (p > 0.05), while they increased significantly in 3% CPP-ACP group (p < 0.05). CONCLUSIONS: The addition of 1% CPP-ACP to the bleaching agent had positive effects on the mineral content and surface hardness of the enamel, and did not negatively affect the whitening effectiveness. CLINICAL SIGNIFICANCE: Adding CPP-ACP to the bleaching agent at appropriate concentrations can eliminate possible negative effects without compromising the effectiveness of the bleaching agent.

Development of Rapid Bioactivity-Expressed Zr-50Ti Alloys by Surface Treatment with Modified Simulated Body Fluid.

Zr-50Ti alloys are promising biomaterials due to their excellent mechanical properties and low magnetic susceptibility. However, Zr-50Ti alloys do not inherently bond well with bone. This study aims to enhance the bioactivity and bonding strength of Zr-50Ti alloys for orthopedic implant materials. Initially, the surface of Zr-50Ti alloys was treated with a sulfuric acid solution to create a microporous structure, increasing surface roughness and area. Subsequently, low crystalline calcium phosphate (L-CaP) precipitation was controlled by adding Mg2+ and/or CO32- ions in modified simulated body fluid (m-SBF). The treated Zr-50Ti alloys were then subjected to cold isostatic pressing to force m-SBF into the micropores, followed by incubation to allow L-CaP formation. The apatite-forming process was tested in simulated body fluid (SBF). The results demonstrated that the incorporation of Mg2+ and/or CO32- ions enabled the L-CaP to cover the entire surface of Zr-50Ti alloys within only one day. After short-term soaking in SBF, the L-CaP layer, modulated by Mg2+ and/or CO32- ions, formed a uniform hydroxyapatite (HA) coating on the surface of the Zr-50Ti alloys, showing potential for optimized bone integration. After soaking in SBF for 14 days, the bonding strength between the apatite layer and alloy has the potential to meet the orthopedic application requirement of 22 MPa. This study demonstrates an effective method to enhance the bioactivity and bonding strength of Zr-50Ti alloys for orthopedic applications.

Hybrid Hydroxyapatite-Metal Complex Materials Derived from Amino Acids and Nucleobases.

Calcium phosphates (CaPs) and their substituted derivatives encompass a large number of compounds with a vast presence in nature that have aroused a great interest for decades. In particular, hydroxyapatite (HAp, Ca10(OH)2(PO4)6) is the most abundant CaP mineral and is significant in the biological world, at least in part due to being a major compound in bones and teeth. HAp exhibits excellent properties, such as safety, stability, hardness, biocompatibility, and osteoconductivity, among others. Even some of its drawbacks, such as its fragility, can be redirected thanks to another essential feature: its great versatility. This is based on the compound's tendency to undergo substitutions of its constituent ions and to incorporate or anchor new molecules on its surface and pores. Thus, its affinity for biomolecules makes it an optimal compound for multiple applications, mainly, but not only, in biological and biomedical fields. The present review provides a chemical and structural context to explain the affinity of HAp for biomolecules such as proteins and nucleic acids to generate hybrid materials. A size-dependent criterium of increasing complexity is applied, ranging from amino acids/nucleobases to the corresponding macromolecules. The incorporation of metal ions or metal complexes into these functionalized compounds is also discussed.

The damage and remineralization strategies of dental hard tissues following radiotherapy.

OBJECTIVES: This study pursued two main purposes. The first aim was to expound on the microscopic factors of radiation-related caries (RRC). Further, it aimed to compare the remineralization effect of different remineralizing agents on demineralized teeth after radiotherapy. METHODS: The enamel and dentin samples of bovine teeth were irradiated with different doses of radiation. After analysis of scanning electron microscope (SEM), X-Ray diffraction (XRD), and energy dispersive spectrometer (EDS), the samples irradiated with 50 Gy radiation were selected and divided into the demineralization group, the double distilled water (DDW) group, the Sodium fluoride (NaF) group, the Casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) group, the NaF + CPP-ACP group, and the Titanium tetrafluoride (TiF4) group. After demineralization, remineralizing agents treatment, and remineralization, the samples were evaluated using SEM, atomic force microscope (AFM), EDS, and transverse microradiography (TMR). RESULTS: A radiation dose of 30 Gy was sufficient to cause damage to the dentinal tubules, but 70 Gy radiation had little effect on the microstructure of enamel. Additionally, the NaF + CPP-ACP group and the TiF4 group significantly promoted deposit formation, decreased surface roughness, and reduced mineral loss and lesion depth of demineralized enamel and dentin samples after radiation. CONCLUSIONS: Radiation causes more significant damage to dentin compared to enamel. NaF + CPP-ACP and TiF4 had a promising ability to promote remineralization of irradiated dental hard tissues. ADVANCES IN KNOWLEDGE: This in vitro study contributes to determining a safer radiation dose range for teeth and identifying the most effective remineralization approach for RRC.

Do Stainless-Steel Pins Coated with Fibroblast Growth Factor-Calcium Phosphatase Composite Layers Have Anti-Infective Effects?

Background: The most problematic complication of external fixation is infection at the pin insertion site. Technology that improves the adhesion of the external fixation pin to the skin, subcutaneous tissue, and bone may prevent infection at the pin site. The purpose of this study is to formulate a calcium phosphate-fibroblast growth factor (Cp-FGF) coating on a stainless-steel external fixation pin and to verify its effectiveness in reducing infection at the pin site and its possible influence on bone fixation in animal experiments. Methods: We compared stainless-steel screws without coating (SS group; n = 32), those with a calcium phosphate coating (Cp group; n = 30), those with a Cp-FGF coating (FGF group; n = 32), and those with a Cp-FGF coating having enhanced biological activity (FGF+ group; n = 32) in male Japanese white domesticated rabbits. Screws were inserted percutaneously into the bilateral proximal tibial diaphysis of the rabbits and implanted for 4 weeks. Screws and periscrew tissue were observed postoperatively for qualitatively assessing infection. Results: Infection assessment by gross findings after 4 weeks (at screw removal) showed no significant differences between the groups. Histopathological evaluation of soft tissue infection and bone tissue infection showed no significant differences between the groups for either soft tissue or bone tissue. Since neither the FGF+ group nor the FGF group showed anti-infective effects, the biological activity of FGF is not the only determining factor. We compared SEM, XRD, coating detaching test, sustained release test, and bioassay to examine physicochemical properties among the coatings but found no sufficient differences. Conclusions: It is suggested that improving the tissue adhesion to and/or biocompatibility of pins is also important to improve the in vivo performance of Cp-FGF-coated external fixation pins.

Adding calcium phosphate agents alongside fluorides may enhance caries prevention and remineralization, although evidence is limited.

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION: Effectiveness of Calcium Phosphate derivative agents on the prevention and remineralization of caries among children- A systematic review & meta-analysis of randomized controlled trials. Singal K, Sharda S, Gupta A, Malik VS, Singh M, Chauhan A, Agarwal A, Pradhan P, Singh M. J Evid Based Dent Pract. 2022; 22(3):101746. SOURCE OF FUNDING: Indian Council of Medical Research. TYPE OF STUDY/DESIGN: Systematic review with meta-analysis.

Localized Crystallization of Calcium Phosphates by Light-Induced Processes.

Medical treatment options for bones and teeth can be significantly enhanced by taking control over the crystallization of biomaterials like hydroxyapatite in the healing process. Light-induced techniques are particularly interesting for this approach as they offer tremendous accuracy in spatial resolution. However, in the field of calcium phosphates, light-induced crystallization has not been investigated so far. Here, proof of principle is established to successfully induce carbonate-hydroxyapatite precipitation by light irradiation. Phosphoric acid is released by a photolabile molecule exclusively after irradiation, combining with calcium ions to form a calcium phosphate in the crystallization medium. 4-Nitrophenylphosphate (4NPP) is established as the photolabile molecule and the system is optimized and fully characterized. A calcium phosphate is crystallized exclusively by irradiation in aqueous solution and identified as carbonate apatite. Control over the localization and stabilization of the carbonate apatite is achieved by a pulsed laser, triggering precipitation in calcium and 4NPP-containing gel matrices. The results of this communication open up a wide range of new opportunities, both in the field of chemistry for more sophisticated reaction control in localized crystallization processes and in the field of medicine for enhanced treatment of calcium phosphate containing biomaterials.

A biphasic calcium phosphate/acylated methacrylate gelatin composite hydrogel promotes osteogenesis and bone repair.

PURPOSE/AIM: Bone defects caused by trauma, tumors, congenital malformation, or inflammation are very common in orthopedics. In recent years, mimicking the composition and structure of natural bone tissue has become a hot topic in biomaterial research, with the aim of developing an ideal biomaterial for bone defect transplantation. Here, the feasibility of a biphasic calcium phosphate (BCP)/acylated methacrylate gelatin (GelMA) composite hydrogel to repair bone defects was evaluated in vitro and in rats. MATERIALS AND METHODS: The biocompatibility of a biphasic calcium phosphate (BCP)/acylated methacrylate gelatin (GelMA) composite hydrogel was evaluated by cytoskeleton staining, live/dead cell staining and cell proliferation assays. The in vitro osteogenic activities of the composite hydrogel were evaluated by alkaline phosphatase and alizarin red staining, as well as osteogenic gene expression analysis at both transcript and protein levels. The in vivo bone repair activities were evaluated using the rat skull defect model. RESULTS: The BCP/GelMA composite hydrogel displayed excellent biocompatibility and promoted osteogenesis of bone marrow mesenchymal stem cells in vitro. In addition, the BCP/GelMA composite hydrogel markedly promoted new bone formation in the rat skull-defect model. CONCLUSIONS: BCP/GelMA composite hydrogel may be an effective artificial material for bone tissue engineering.

Osteoinductive calcium phosphate with submicron topography as bone graft substitute for maxillary sinus floor augmentation: A translational study.

OBJECTIVES: The aim of this study was the preclinical and clinical evaluation of osteoinductive calcium phosphate with submicron surface topography as a bone graft substitute for maxillary sinus floor augmentation (MSFA). MATERIAL AND METHODS: A preclinical sheep model of MSFA was used to compare a calcium phosphate with submicron needle-shaped topography (BCPN , MagnetOs Granules, Kuros Biosciences BV) to a calcium phosphate with submicron grain-shaped topography (BCPG ) and autologous bone graft (ABG) as controls. Secondly, a 10-patient, prospective, randomized, controlled trial was performed to compare BCPN to ABG in MSFA with two-stage implant placement. RESULTS: The pre-clinical study demonstrated that both BCPN and BCPG were highly biocompatible, supported bony ingrowth with direct bone apposition against the material, and exhibited bone formation as early as 3 weeks post-implantation. However, BCPN demonstrated significantly more bone formation than BCPG at the study endpoint of 12 weeks. Only BCPN reached an equivalent amount of bone formation in the available space and a greater proportion of calcified material (bone + graft material) in the maxillary sinus compared to the "gold standard" ABG after 12 weeks. These results were validated in a small prospective clinical study, in which BCPN was found comparable to ABG in implant stability, bone height, new bone formation in trephine core biopsies, and overall clinical outcome. CONCLUSION: This translational work demonstrates that osteoinductive calcium phosphates are promising bone graft substitutes for MSFA, whereas their bone-forming potential depends on the design of their surface features. Netherlands Trial Register, NL6436.

Screening of functionalized collagen membranes with a porcine periodontal regeneration model.

OBJECTIVES: Current methods for periodontal regeneration do not promote collagen fiber insertions into new bone and cementum. We used a pig wound model to screen different functionalized collagen membranes in promoting periodontal reattachment to root surfaces. METHODS: Treatment groups included (1) control with no membranes, (2) collagen-coated membranes, (3) membranes with insulin-like growth factor-1 (IGF-1), (4) membranes with amelotin, or (5) membranes attached with calcium phosphate cement (CPC), or with CPC combined with IGF-1. Flap procedures were performed on mandibular and maxillary premolars of each pig. RESULTS: Histomorphometric, micro-CT, and clinical measurements obtained at 4 and 12 weeks after surgery showed cementum formation on denuded roots and reformation of alveolar bone, indicating that the pig model can model healing responses in periodontal regeneration. Calcium phosphate cement simplified procedures by eliminating the need for sutures and improved regeneration of alveolar bone (p < 0.05) compared with other treatments. There was a reduction (p < 0.05) of PD only for the IGF group. Large observed variances between treatment groups indicated that a priori power analyses should be conducted to optimize statistical analysis. CONCLUSIONS: Pigs can model discrete elements of periodontal healing using collagen-based, functionalized membranes. Screening indicates that membrane anchorage with calcium phosphate cements improve regeneration of alveolar bone.