A New, MWCNT-Based, Solid-State Thiabendazole-Selective Sensor.

Direct potentiometric measurements using solid-state sensors have a great potential for thiabendazole (TBZ) determination, considering simplicity, accuracy, and low cost. Modifying the sensing material of the sensor with multi-walled carbon nanotubes (MWCNTs) leads to improved analytical properties of the sensor. In this study, a new potentiometric solid-state sensor for TBZ determination, based on MWCNTs modified with a sulfate group, and TBZ ion as sensing material was developed. The sensor exhibited a Nernstian response for TBZ (60.4 mV/decade of activity) in a working range between 8.6 × 10-7 and 1.0 × 10-3 M. The detection limit for TBZ was 6.2 × 10-7 M. The response time of the sensor for TBZ was 8 s, and its signal drift was only 1.7 mV/h. The new sensor is applicable for direct potentiometric determination of TBZ in complex real samples, such as fruit peel. The accuracy of TBZ determination is confirmed using the standard addition method.

A sensitive signal-on electrochemiluminescence sensor based on a nanocomposite of polypyrrole-Gd2O3 for the determination of L-cysteine in biological fluids.

A sensitive solid-state electrochemiluminescence (ECL) electrode for L-cysteine was developed based on depositing layers of a hybrid nanocomposite of polypyrrole-dodecyl benzene sulfate-sodium perchlorate-sodium carbonate-gadolinium (PPy-Gd2O3) on a platinum substrate. The presence of the Gd2O3 nanoparticle layer improved the ECL signal, and under optimum conditions, a linear relationship was observed between the signal and the logarithm of L-cysteine concentration from 1.0 × 10-13 to 1.0 × 10-6 M (R2 = 0.9937). At the emission wavelength around 425 nm , at which the analytical signal was measured, the electrode showed an RSD of less than 4% and a low detection limit of 4.2 × 10-14 M. The results proved to be reproducible and stable, and the electrode was applicable in the determination of L-cysteine in biological fluids with recoveries from 94.0-107%. Graphical abstract The results of this research indicated that the weak ECL of luminol is greatly improved by traces of L-cysteine on a solid-state platinum electrode coated with polypyrrole and gadolinium oxide nanoparticles (NPs) and have hence been effectively used in the analysis of L-cysteine in plasma and saliva.

Digital Intraoral Imaging Re-Exposure Rates of Dental Students.

A guiding principle of radiation safety is ensuring that radiation dosage is as low as possible while yielding the necessary diagnostic information. Intraoral images taken with conventional dental film have a higher re-exposure rate when taken by dental students compared to experienced staff. The aim of this study was to examine the prevalence of and reasons for re-exposure of digital intraoral images taken by third- and fourth-year dental students in a dental school clinic. At one dental school in Canada, the total number of intraoral images taken by third- and fourth-year dental students, re-exposures, and error descriptions were extracted from patient clinical records for an eight-month period (September 2015 to April 2016). The data were categorized to distinguish between digital images taken with solid-state sensors or photostimulable phosphor plates (PSP). The results showed that 9,397 intraoral images were made, and 1,064 required re-exposure. The most common error requiring re-exposure for bitewing images was an error in placement of the receptor too far mesially or distally (29% for sensors and 18% for PSP). The most common error requiring re-exposure for periapical images was inadequate capture of the periapical area (37% for sensors and 6% for PSP). A retake rate of 11% was calculated, and the common technique errors causing image deficiencies were identified. Educational intervention can now be specifically designed to reduce the retake rate and radiation dose for future patients.

Determination of Brilliant Blue FCF by a Novel Solid-state ECL Quenching Sensor of Ru(bpy)32+-poly(sulfosalicylic acid)/GCE.

A novel solid-state electrochemiluminescence (ECL) quenching sensor was constructed for determination of brilliant blue FCF (BB FCF). Under a simple electropolymerization step, poly(sulfosalicylic acid) (PSSA) film attached luminophore Ru(bpy)32+ was successfully formed on the surface of a glass carbon electrode [Ru(bpy)32+-PSSA/GCE], which exhibited excellent ECL behavior. A high quenching effect on the ECL signal of the Ru(bpy)32+-PSSA/GCE was obtained with the presence of low concentration of BB FCF. Moreover, the quenched ECL intensity showed a linear relation within the BB FCF concentration range of 0.5 - 7 and 7 - 10 µmol/L, with a detection limit of 57 nmol/L (S/N = 3). Besides, Ru(bpy)32+-PSSA/GCE exhibited good reproducibility and was successfully applied in the practical detection of BB FCF in peppermint candy samples.