Polysaccharide-Targeting Lipid Nanoparticles to Kill Gram-Negative Bacteria.

The rapid increase and spread of Gram-negative bacteria resistant to many or all existing treatments threaten a return to the preantibiotic era. The presence of bacterial polysaccharides that impede the penetration of many antimicrobials and protect them from the innate immune system contributes to resistance and pathogenicity. No currently approved antibiotics target the polysaccharide regions of microbes. Here, describe monolaurin-based niosomes, the first lipid nanoparticles that can eliminate bacterial polysaccharides from hypervirulent Klebsiella pneumoniae, are described. Their combination with polymyxin B shows no cytotoxicity in vitro and is highly effective in combating K. pneumoniae infection in vivo. Comprehensive mechanistic studies have revealed that antimicrobial activity proceeds via a multimodal mechanism. Initially, lipid nanoparticles disrupt polysaccharides, then outer and inner membranes are destabilized and destroyed by polymyxin B, resulting in synergistic cell lysis. This novel lipidic nanoparticle system shows tremendous promise as a highly effective antimicrobial treatment targeting multidrug-resistant Gram-negative pathogens.

The Topology of Polymer Brushes Determines Their Nanoscale Hydration.

Time-of-flight neutron reflectometry (ToF-NR) performed under different relative humidity conditions demonstrates that polymer brushes constituted by hydrophilic, cyclic macromolecules exhibit a more compact conformation with lower roughness as compared to linear brush analogues, due to the absence of dangling chain ends extending at the polymer-vapor interface. In addition, cyclic brushes feature a larger swelling ratio and an increased solvent uptake with respect to their linear counterparts as a consequence of the increased interchain steric repulsions. It is proposed that differences in swelling ratios between linear and cyclic brushes come from differences in osmotic pressure experienced by each brush topology. These differences stem from entropic constraints. The findings suggest that to correlate the equilibrium swelling ratios at different relative humidity for different topologies a new form of the Flory-like expression for equilibrium thicknesses of grafted brushes is needed.

Investigating the interactions of the 18kDa translocator protein and its ligand PK11195 in planar lipid bilayers.

The functional effects of a drug ligand may be due not only to an interaction with its membrane protein target, but also with the surrounding lipid membrane. We have investigated the interaction of a drug ligand, PK11195, with its primary protein target, the integral membrane 18kDa translocator protein (TSPO), and model membranes using Langmuir monolayers, quartz crystal microbalance with dissipation monitoring (QCM-D) and neutron reflectometry (NR). We found that PK11195 is incorporated into lipid monolayers and lipid bilayers, causing a decrease in lipid area/molecule and an increase in lipid bilayer rigidity. NR revealed that PK11195 is incorporated into the lipid chain region at a volume fraction of ~10%. We reconstituted isolated mouse TSPO into a lipid bilayer and studied its interaction with PK11195 using QCM-D, which revealed a larger than expected frequency response and indicated a possible conformational change of the protein. NR measurements revealed a TSPO surface coverage of 23% when immobilised to a modified surface via its polyhistidine tag, and a thickness of 51Å for the TSPO layer. These techniques allowed us to probe both the interaction of TSPO with PK11195, and PK11195 with model membranes. It is possible that previously reported TSPO-independent effects of PK11195 are due to incorporation into the lipid bilayer and alteration of its physical properties. There are also implications for the variable binding profiles observed for TSPO ligands, as drug-membrane interactions may contribute to the apparent affinity of TSPO ligands.

The interaction of styrene maleic acid copolymers with phospholipids in Langmuir monolayers, vesicles and nanodiscs; a structural study.

HYPOTHESIS: Self-assembly of amphipathic styrene maleic acid copolymers with phospholipids in aqueous solution results in the formation of 'nanodiscs' containing a planar segment of phospholipid bilayer encapsulated by a polymer belt. Recently, studies have reported that lipids rapidly exchange between both nanodiscs in solution and external sources of lipids. Outstanding questions remain regarding details of polymer-lipid interactions, factors influencing lipid exchange and structural effects of such exchange processes. Here, the dynamic behaviour of nanodiscs is investigated, specifically the role of membrane charge and polymer chemistry. EXPERIMENTS: Two model systems are investigated: fluorescently labelled phospholipid vesicles, and Langmuir monolayers of phospholipids. Using fluorescence spectroscopy and time-resolved neutron reflectometry, the membrane potential, monolayer structure and composition are monitored with respect to time upon polymer and nanodisc interactions. FINDINGS: In the presence of external lipids, polymer chains embed throughout lipid membranes, the extent of which is governed by the net membrane charge. Nanodiscs stabilised by three different polymers will all exchange lipids and polymer with monolayers to differing extents, related to the properties of the stabilising polymer belt. These results demonstrate the dynamic nature of nanodiscs which interact with the local environment and are likely to deposit both lipids and polymer at all stages of use.

Membrane interactions of antimicrobial peptide-loaded microgels.

In the present study, lipid membrane interactions of anionic poly(ethyl acrylate-co-methacrylic acid) (MAA) microgels as carriers for the cationic antimicrobial peptide LL-37 (LLGDFFRKSKEKIGKEFKRIVQRIKDFLRNLVPRTES) were investigated. In doing so, neutron reflectometry (NR), Fourier-transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), zeta potential, ellipsometry, and circular dichroism spectroscopy (CD) experiments were employed to investigate the relative importance of membrane interactions of peptide-loaded microgel particles and of released peptide. For the free peptide, NR results showed membrane binding occurring preferentially in the tail region in a concentration-dependent manner. At low peptide concentration (0.3 µM) only peptide insertion in the outer leaflet was seen, however, pronounced membrane defects and peptide present in both leaflets was observed at higher peptide concentration (5.0 µM). LL-37 loaded into MAA microgels qualitatively mirrored these effects regarding both peptide localization within the membrane and concentration-dependent defect formation. In addition, very limited membrane binding of microgel particles was observed, in agreement with FTIR-ATR and liposome leakage results. FTIR-ATR showed LL-37 to undergo α-helix formation on membrane insertion, also supported by CD results, the kinetics of which was substantially reduced for microgel-loaded LL-37 due to sustained peptide release. Together, these findings demonstrate that membrane interactions for microgel-loaded LL-37 are dominated by released peptide, but also that slow release of microgel-loaded LL-37 translates into kinetic effects on peptide-membrane interactions, relating to both peptide localization within the bilayer, and to bilayer structure.

Protocol for Investigating the Interactions Between Intrinsically Disordered Proteins and Membranes by Neutron Reflectometry.

Several intrinsically disordered proteins (IDPs) exhibit high affinity for lipid membranes. Among the different biophysical methods to probe protein-lipid interaction, neutron reflectometry (NR) can provide direct and structural detailed information on the location of the IDP with respect to the membrane. Supported lipid bilayers are commonly used as cell membrane models in such experiments. NR measurements can be collected on the supported lipid bilayer before and after the interaction with the IDP to characterize whether the protein molecules are mainly located on the membrane surface (interaction with the lipid headgroups), are penetrating into the hydrophobic region of the membrane (interaction with the lipid acyl chains), or are not interacting at all with the membrane. The lipid composition of the supported lipid bilayer can easily be tuned; hence the NR experiments can be designed to investigate selective IDP-lipid interactions.This chapter will describe the fundamental steps for performing an NR experiment and the subsequent data analysis aimed at characterizing IDP-lipid bilayer interactions. The specific case of an intrinsically disordered region (IDR) from the membrane protein Na+/H+ exchanger isoform 1 (NHE1) will be used as an example, but the same protocol can be easily adapted to other IDPs.

Influence of levofloxacin and clarithromycin on the structure of DPPC monolayers.

Research on lipid/drug interactions at the nanoscale underpins the emergence of synergistic mechanisms for topical drug administration. The structural understanding of bio-mimetic systems employing 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) as a lung surfactant model mixed with antibiotics, as well as their biophysical properties, is of critical importance to modulate the effectiveness of therapeutic agents released directly to the airways. In this paper, we investigate the structural details of the interaction between Levofloxacin, 'a respiratory quinolone', and the macrolide Clarithromycin, with DPPC monolayers at the air-water interface, using a combination of Brewster angle microscopy, polarization modulation-infrared reflection-adsorption spectroscopy (PM-IRRAS), surface pressure isotherms and neutron reflectometry (NR) to describe the structural details of this interaction. The results allowed association of changes in the π-A isotherm profile with changes in the molecular organization and the co-localization of the antibiotics within the lipid monolayer by NR measurements. Overall, both antibiotics are able to increase the thickness of the acyl tails in DPPC monolayers with a corresponding reduction in tail tilt as well as to interact with the phospholipid headgroups as shown by PM-IRRAS experiments. The effects on the DPPC monolayers are correlated with the physical-chemical properties of each antibiotic and dependent on its concentration.

Adsorption of polysorbate 20 and proteins on hydrophobic polystyrene surfaces studied by neutron reflectometry.

Understanding the adsorption of protein and surfactant molecules on hydrophobic surfaces is very important for storage stability and delivery of pharmaceutical liquid formulations as many commonly-used devices, such as drug containers and syringes, have hydrophobic surfaces. Neutron reflectometry is used here to investigate the structure information of the adsorption process of non-ionic surfactant (polysorbate 20) and proteins (monoclonal antibody (mAb) and lysozyme) on polystyrene surfaces. Thickness of adsorbed polysorbate 20 thin film is observed to be ≈21 Å, comparable to the radius of gyration of polysorbate 20 micelles in solution. Although no lysozyme adsorption is observed on the polystyrene surface in low solution pH condition, the mAb can be strongly absorbed on the polystyrene surface with a layer thickness of ≈145 Å. The mAb concentration near the surface is about 135 mg/ml significantly larger than the bulk protein concentration. The differences in adsorption behavior are attributed to different protein interactions with a hydrophobic surface. Further, both surfactants and proteins adsorbed on the polystyrene surfaces can not be rinsed off using pure water.

Interactions between model cell membranes and the neuroactive drug propofol.

Vibrational sum frequency spectroscopy (VSFS) complemented by surface pressure isotherm and neutron reflectometry (NR) experiments were employed to investigate the interactions between propofol, a small amphiphilic molecule that currently is the most common general anaesthetic drug, and phospholipid monolayers. A series of biologically relevant saturated phospholipids of varying chain length from C18 to C14 were spread on either pure water or propofol (2,6-bis(1-methylethyl)phenol) solution in a Langmuir trough, and the change in the molecular structure of the film, induced by the interaction with propofol, was studied with respect to the surface pressure. The results from the surface pressure isotherm experiments revealed that propofol, as long as it remains at the interface, enhances the fluidity of the phospholipid monolayer. The VSF spectra demonstrate that for each phospholipid the amount of propofol in the monolayer region decreases with increasing surface pressure. Such squeeze out is in contrast to the enhanced interactions that can be exhibited by more complex amphiphilic molecules such as peptides. At surface pressures of 22-25 mN m-1, which are relevant for biological cell membranes, most of the propofol has been expelled from the monolayer, especially in the case of the C16 and C18 phospholipids that adopt a liquid condensed phase packing of its alkyl tails. At lower surface pressures of 5 mN m-1, the effect of propofol on the structure of the alkyl tails is enhanced when the phospholipids are present in a liquid expanded phase. Specifically, for the C16 phospholipid, NR data reveal that propofol is located exclusively in the head group region, which is rationalized in the context of previous studies. The results imply a non-homogeneous distribution of propofol in the plane of real cell membranes, which is an inference that requires urgent testing and may help to explain why such low concentration of the drug are required to induce general anaesthesia.

Neutron Reflectometry reveals the interaction between functionalized SPIONs and the surface of lipid bilayers.

The safe application of nanotechnology devices in biomedicine requires fundamental understanding on how they interact with and affect the different components of biological systems. In this respect, the cellular membrane, the cell envelope, certainly represents an important target or barrier for nanosystems. Here we report on the interaction between functionalized SuperParamagnetic Iron Oxide Nanoparticles (SPIONs), promising contrast agents for Magnetic Resonance Imaging (MRI), and lipid bilayers that mimic the plasma membrane. Neutron Reflectometry, supported by Quartz Crystal Microbalance with Dissipation monitoring (QCM-D) experiments, was used to characterize this interaction by varying both SPION coating and lipid bilayer composition. In particular, the interaction of two different SPIONs, functionalized with a cationic surfactant and a zwitterionic phospholipid, and lipid bilayers, containing different amount of cholesterol, were compared. The obtained results were further validated by Dynamic Light Scattering (DLS) measurements and Cryogenic Transmission Electron Microscopy (Cryo-TEM) images. None of the investigated functionalized SPIONs were found to disrupt the lipid membrane. However, in all case we observed the attachment of the functionalized SPIONs onto the surface of the bilayers, which was affected by the bilayer rigidity, i.e. the cholesterol concentration.

Building a biomimetic membrane for neutron reflectivity investigation: Complexity, asymmetry and contrast.

The preparation and investigation of model membranes is deserving growing interest both for the physics of complex systems, and for biology. The need of simplified models should preserve mimicking the qualifying characteristics of biological membranes, and keep non-invasive and detailed description. As a main feature, biological membranes are non-homogeneous in the disposition of components, both in the lateral and in the transverse direction. We prepared asymmetric supported membranes containing GM1 ganglioside in biomimetic proportion according to different protocols. Then, we studied their internal structure by neutron reflectometry, providing few-Angstrom sensitivity in the cross direction meanwhile avoiding radiation damage. This technique can also be profitably applied to study interactions at the membrane surface. The best protocol has proven to be the Langmuir-Blodgett/Langmuir-Schaefer depositions. Notably, also the simpler and most accessible protocol of vesicle fusion was found to be suitable for straightforward and good quality deposition of compositionally asymmetric membranes.

Enhanced specific ion effects in ethylene glycol-based thermoresponsive polymer brushes.

The thermoresponse of poly(di(ethyleneglycol) methyl ether methacrylate) (PMEO2MA) brushes has been investigated in the presence of monovalent anions at either end of the Hofmeister series using ellipsometry, neutron reflectometry (NR) and colloid probe atomic force microscopy (AFM). NR measurements in deuterium oxide showed no evidence of vertical phase separation perpendicular to the grafting substrate with a gradual transition between a block-like, dense structure at 45°C and an extended, dilute conformation at lower temperatures. All three techniques revealed a shift to a more collapsed state for a given temperature in kosmotropic potassium acetate solutions, while more swollen structures were observed in chaotropic potassium thiocyanate solutions. No difference was observed between 250mM and 500mM thiocyanate for a 540Å brush studied by ellipsometry, while the lower molecular weight ∼200Å brushes used for NR and AFM measurements continued to respond with increasing salt concentration. The effect of thiocyanate on the temperature response was greatly enhanced relative to PNIPAM with the shift in temperature response at 250mM being five times greater than a PNIPAM brush of similar thickness and grafting density.

Thermoresponsive PNIPAM Coatings on Nanostructured Gratings for Cell Alignment and Release.

Thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) has been widely used as a surface coating to thermally control the detachment of adsorbed cells without the need for extreme stimuli such as enzyme treatment. Recently, the use of 2D and 3D scaffolds in controlling cell positioning, growth, spreading, and migration has been of a great interest in tissue engineering and cell biology. Here, we use a PNIPAM polymer surface coating atop a nanostructured linear diffraction grating to controllably change the surface topography of 2D linear structures using temperature stimuli. Neutron reflectometry and surface diffraction are utilized to examine the conformity of the polymer coating to the grating surface, its hydration profile, and its evolution in response to temperature variations. The results show that, in the collapsed state, the PNIPAM coating conforms to the grating structures and retains a uniform hydration of 63%. In the swollen state, the polymer expands beyond the grating channels and absorbs up to 87% water. Such properties are particularly desirable for 2D cell growth scaffolds with a built-in nonextreme tissue-release mechanism. Indeed, the current system demonstrates advanced performance in the effective alignment of cultured fibroblast cells and the easy release of the cells upon temperature change.