Heat-activated sustaining nitric oxide release from zwitterionic diazeniumdiolate loaded in thermo-sensitive liposomes.

Zwitterionic diazeniumdiolate, a nitric oxide precursor, was dissolved in basic buffer solution (pH=9.0) and encapsulated in thermo-sensitive liposomes composed of phospholipids of different sensitive temperatures. The basic intra-liposomal environment dramatically delayed spontaneous NO release. When the liposomes were placed in physiological buffer solution and temperatures were increased to the sensitive temperatures of the phospholipids' membranes, extra-liposomal protons started to influx to collapse the pH gradient and subsequently induce a significant NO release. Moreover, the presence of a stronger pH gradient when the liposomes were applied to a more acidic environment caused a higher proton influx driving force to trigger the influx of protons and, subsequently, NO release. In this work, we demonstrate that thermo-sensitive liposomes can be used to create a stable pH gradient in a nanoenvironment entrapping zwitterionic diazeniumdiolate for sustained and heat/acid-activated NO release.

Enhancing analytical accuracy of intravascular electrochemical oxygen sensors via nitric oxide release using S-nitroso-N-acetyl-penicillamine (SNAP) impregnated catheter tubing.

Implantable medical devices are an integral part of primary/critical care. However, these devices carry a high risk for blood clots, caused by platelet aggregation on a foreign body surface. This study focuses on the development of a simplified approach to create nitric oxide (NO) releasing intravascular electrochemical oxygen (O2) sensors with increased biocompatibility and analytical accuracy. The implantable sensors are prepared by embedding S-nitroso-N-acetylpenacillamine (SNAP) as the NO donor molecule in the walls of the catheter type sensors. The SNAP-impregnated catheters were prepared by swelling silicone rubber tubing in a tetrahydrofuran solution containing SNAP. Control and SNAP-impregnated catheters were used to fabricate the Clark-style amperometric PO2 sensors. The SNAP-impregnated sensors release NO under physiological conditions for 18 d as measured by chemiluminescence. The analytical response of the SNAP-impregnated sensors was evaluated in vitro and in vivo. Rabbit and swine models (with sensors placed in both veins and arteries) were used to evaluate the effects on thrombus formation and analytical in vivo PO2 sensing performance. The SNAP-impregnated PO2 sensors were found to more accurately measure PO2 levels in blood continuously (over 7 and 20 h animal experiments) with significantly reduced thrombus formation (as compared to controls) on their surfaces.

72-Hour in vivo evaluation of nitric oxide generating artificial lung gas exchange fibers in sheep.

The large, densely packed artificial surface area of artificial lungs results in rapid clotting and device failure. Surface generated nitric oxide (NO) can be used to reduce platelet activation and coagulation on gas exchange fibers, while not inducing patient bleeding due to its short half-life in blood. To generate NO, artificial lungs can be manufactured with PDMS hollow fibers embedded with copper nanoparticles (Cu NP) and supplied with an infusion of the NO donor S-nitroso-N-acetyl-penicillamine (SNAP). The SNAP reacts with Cu NP to generate NO. This study investigates clot formation and gas exchange performance of artificial lungs with either NO-generating Cu-PDMS or standard polymethylpentene (PMP) fibers. One miniature artificial lung (MAL) made with 10 wt% Cu-PDMS hollow fibers and one PMP control MAL were attached to sheep in parallel in a veno-venous extracorporeal membrane oxygenation circuit (n = 8). Blood flow through each device was set at 300 mL/min, and each device received a SNAP infusion of 0.12 µmol/min. The ACT was between 110 and 180 s in all cases. Blood flow resistance was calculated as a measure of clot formation on the fiber bundle. Gas exchange experiments comparing the two groups were conducted every 24 h at blood flow rates of 300 and 600 mL/min. Devices were removed once the resistance reached 3x baseline (failure) or following 72 h. All devices were imaged using scanning electron microscopy (SEM) at the inlet, outlet, and middle of the fiber bundle. The Cu-PDMS NO generating MALs had a significantly smaller increase in resistance compared to the control devices. Resistance rose from 26 ±â€¯8 and 23 ±â€¯5 in the control and Cu-PDMS devices, respectively, to 35 ±â€¯8 mmHg/(mL/min) and 72 ±â€¯23 mmHg/(mL/min) at the end of each experiment. The resistance and SEM imaging of fiber surfaces demonstrate lower clot formation on Cu-PDMS fibers. Although not statistically significant, oxygen transfer for the Cu-PDMS MALs was 13.3% less than the control at 600 mL/min blood flow rate. Future in vivo studies with larger Cu-PDMS devices are needed to define gas exchange capabilities and anticoagulant activity over a long-term study at clinically relevant ACTs. STATEMENT OF SIGNIFICANCE: In artificial lungs, the large, densely-packed blood contacting surface area of the hollow fiber bundle is critical for gas exchange but also creates rapid, surface-generated clot requiring significant anticoagulation. Monitoring of anticoagulation, thrombosis, and resultant complications has kept permanent respiratory support from becoming a clinical reality. In this study, we use a hollow fiber material that generates nitric oxide (NO) to prevent platelet activation at the blood contacting surface. This material is tested in vivo in a miniature artificial lung and compared against the clinical standard. Results indicated significantly reduced clot formation. Surface-focused anticoagulation like this should reduce complication rates and allow for permanent respiratory support by extending the functional lifespan of artificial lungs and can further be applied to other medical devices.

Multifunctional S-Nitroso-N-acetylpenicillamine-Incorporated Medical-Grade Polymer with Selenium Interface for Biomedical Applications.

Modern crises in implantable or indwelling blood-contacting medical devices are mainly due to the dual problems of infection and thrombogenicity. There is a paucity of biomaterials that can address both problems simultaneously through a singular platform. Taking cues from the body's own defense mechanism against infection and blood clotting (thrombosis) via the endogenous gasotransmitter nitric oxide (NO), both of these issues are addressed through the development of a layered S-nitroso-N-acetylpenicillamine (SNAP)-doped polymer with a blended selenium (Se)-polymer interface. The unique capability of the SNAP-Se-1 polymer composites to explicitly release NO from the SNAP reservoir as well as generate NO via the incorporated Se is reported for the first time. The NO release from the SNAP-doped polymer increased substantially in the presence of the Se interface. The Se interface was able to generate NO in the presence of S-nitrosoglutathione (GSNO) and glutathione (GSH), demonstrating the capability of generating NO from endogenous S-nitrosothiols (RSNO). Scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) traced distribution of elemental Se nanoparticles on the interface and the surface properties were evaluated by surface wettability and roughness. The SNAP-Se-1 efficiently inhibited the growth of bacteria and reduced platelet adhesion while showing minimal cytotoxicity, thus potentially eliminating the risks of systemic antibiotic and blood coagulation therapy. The SNAP-Se-1 exhibited antibacterial activity of ∼2.39 and ∼2.25 log reductions in the growth of clinically challenging adhered Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. SNAP-Se-1 also significantly reduced platelet adhesion by 85.5% compared to corresponding controls. A WST-8-based cell viability test performed on NIH 3T3 mouse fibroblast cells provided supporting evidence for the potential biocompatibility of the material in vitro. These results highlight the prospective utility of SNAP-Se-1 as a blood-contacting infection-resistant biomaterial in vitro which can be further tuned by application specificity.

Smart pH-Sensitive Nanogels for Enhancing Synergistic Anticancer Effects of Integrin αvß3 Specific Apoptotic Peptide and Therapeutic Nitric Oxide.

Apoptotic peptide (kla), which can trigger the mitochondria-mediated apoptotic programmed cell death, has been widely recognized as a potential anticancer agent. However, its therapeutic potential has been significantly impaired by its poor biostability, lack of tumor specificity, and particularly low cellular uptake. Herein, a linear peptide Arg-Trp-d-Arg-Asn-Arg (RWrNR) was identified as an integrin αvß3 specific ligand with a nanomolar dissociation constant (Kd = 0.95 nM), which can greatly improve kla antitumor activity (IC50 = 8.81 µM) by improving its cellular uptake, compared to the classic integrin-recognition motif c-RGDyK (IC50 = 37.96 µM). Particularly, the RWrNR-kla conjugate can be entrapped in acidic sensitive nanogels (RK/Parg/CMCS-NGs), composed of poly-l-arginine (Parg) and carboxymethyl chitosan (CMCS, pI = 6.8), which can not only carry out controlled release of RWrNR-kla in response to the tumor acidic microenvironment, and consequently enhance its tumor specificity and cell internalization, but also trigger tumor-associated macrophages to generate nitric oxide, leading to enhanced synergistic anticancer efficacy. Importantly, RK/Parg/CMCS-NGs have been proven to effectively activate the apoptosis signaling pathway in vivo and significantly inhibit tumor growth with minimal adverse effects. To summarize, RK/Parg/CMCS-NGs are a promising apoptotic peptide-based therapeutics with enhanced tumor accumulation, cytosolic delivery, and synergistic anticancer effects, thereby holding great potential for the treatment of malignant tumors.

PEI/NONOates-doped PLGA nanoparticles for eradicating methicillin-resistant Staphylococcus aureus biofilm in diabetic wounds via binding to the biofilm matrix.

Wounds infected with methicillin-resistant Staphylococcus aureus (MRSA) biofilm represent a high risk in patients with diabetes. Nitric oxide (NO) has shown promise in dispersing biofilm and wound healing. For an effective treatment of MRSA biofilm-infected wounds, however, NO needs to be supplied to the biofilm matrix in a sustainable manner due to a short half-life and limited diffusion distance of NO. In this study, polyethylenimine/diazeniumdiolate (PEI/NONOate)-doped PLGA nanoparticles (PLGA-PEI/NO NPs) with an ability to bind to the biofilm matrix are developed to facilitate the NO delivery to MRSA biofilm-infected wound. In simulated wound fluid, PLGA-PEI/NO NPs show an extended NO release over 4 days. PLGA-PEI/NO NPs firmly bind to the MRSA biofilm matrix, resulting in a greatly enhanced anti-biofilm activity. Moreover, PLGA-PEI/NO NPs accelerate healing of MRSA biofilm-infected wounds in diabetic mice along with complete biofilm dispersal and reduced bacterial burden. These results suggest that the biofilm-binding NO-releasing NPs represent a promising NO delivery system for the treatments of biofilm-infected chronic wounds.

Nitric oxide-releasing semi-crystalline thermoplastic polymers: preparation, characterization and application to devise anti-inflammatory and bactericidal implants.

Semi-crystalline thermoplastics are an important class of biomaterials with applications in creating extracorporeal and implantable medical devices. In situ release of nitric oxide (NO) from medical devices can enhance their performance via NO's potent anti-thrombotic, bactericidal, anti-inflammatory, and angiogenic activity. However, NO-releasing semi-crystalline thermoplastic systems are limited and the relationship between polymer crystallinity and NO release profile is unknown. In this paper, the functionalization of poly(ether-block-amide) (PEBA), Nylon 12, and polyurethane tubes, as examples of semi-crystalline polymers, with the NO donor S-nitroso-N-acetylpenicillamine (SNAP) within, is demonstrated via a polymer swelling method. The degree of crystallinity of the polymer plays a crucial role in both SNAP impregnation and NO release. Nylon 12, which has a relatively high degree of crystallinity, exhibits an unprecedented NO release duration of over 5 months at a low NO level, while PEBA tubing exhibits NO release over days to weeks. As a new biomedical application of NO, the NO-releasing PEBA tubing is examined as a cannula for continuous subcutaneous insulin infusion. The released NO is shown to enhance insulin absorption into the bloodstream probably by suppressing the tissue inflammatory response, and thereby could benefit insulin pump therapy for diabetes management.

Nitric Oxide-Releasing Macromolecular Scaffolds for Antibacterial Applications.

Exogenous nitric oxide (NO) represents an attractive antibacterial agent because of its ability to both disperse and directly kill bacterial biofilms while avoiding resistance. Due to the challenges associated with administering gaseous NO, NO-releasing macromolecular scaffolds are developed to facilitate NO delivery. This progress report describes the rational design and application of NO-releasing macromolecular scaffolds as antibacterial therapeutics. Special consideration is given to the role of the physicochemical properties of the NO storage vehicles on antibacterial or anti-biofilm activity.

Plant-inspired gallolamine catalytic surface chemistry for engineering an efficient nitric oxide generating coating.

A novel concept of generating therapeutic gas, nitric oxide (NO) via catalytic phenolic-amine "gallolamine" surface chemistry is developed. The concept is realized using plant polyphenol, gallic acid, and a glutathione peroxidase-like organoselenium compound cystamine or selenocystamine through one-step phenol-amine molecular assembling process. The resulting NO-generating coating with phenolic-cystamine or -selenocystamine framework showed the ability for long-term, steady and controllable range of NO release rates being unparalleled with any existing NO-releasing or NO-generating surface engineering toolkits. STATEMENT OF SIGNIFICANCE: Developing a facile and versatile strategy for a NO-generating coating with long-term, stable and adjustable NO release is of great interest for the application of blood-contacting materials and devices. Covalent immobilization of glutathione peroxidase (GPx)-like compound to generate NO from a material surface by exposure of endogenously existed S-nitrothiol (RSNO) is a popular strategy. However, it is generally involved in multi-step and complicated processes. Moreover, the amount of immobilized GPx-like compounds is limited by the density of introduced reactive functional groups on a surface. Herein, we propose a novel concept of catalytic plant-inspired gallolamine surface chemistry for material-independent NO-generating coatings. The concept is realized using plant polyphenol, gallic acid, and a GPx-like organoselenium compound cystamine or selenocystamine through one-step phenol-amine molecular assembling process. Without tedious multi-step synthesis, complicated surface treatments, and leakage of toxic chemicals, our unprecedentedly simple, histocompatible and biocompatible phenolic-cystamine or -selenocystamine framework demonstrated long-term, on-demand and facile dose controls of NO generated from the engineering surfaces. These unique features of such a NO-generating coating imparted a material with ability to impressively improve anti-thrombogenicity in vivo. This work constitutes the first report of an interfacial catalytic coating based on material-independent surface chemistry by plant polyphenols. This concept not only expands the application of material-independent surface chemistry in an interfacial catalytic area, but also can be a new platform for antithrombotic materials.

Supramolecular poly(acrylic acid)/F127 hydrogel with hydration-controlled nitric oxide release for enhancing wound healing.

Topical nitric oxide (NO) delivery has been shown to accelerate wound healing. However, delivering NO to wounds at appropriate rates and doses requires new biomaterial-based strategies. Here, we describe the development of supramolecular interpolymer complex hydrogels comprising PEO-PPO-PEO (F127) micelles embedded in a poly(acrylic acid) (PAA) matrix, with S-nitrosoglutathione (GSNO) molecules dissolved in the hydrophilic domain. We show that PAA:F127/GSNO hydrogels start releasing NO upon hydration at rates controlled by their rates of water absorption. SAXS measurements indicate that the supramolecular structure of the hydrogels retains long-range order domains of F127 micelles. The PAA/F1227 hydrogels displayed dense morphologies and reduced rates of hydration. The NO release rates remain constant over the first 200 min, are directly correlated with the hydration rates of the PAA:F127/GSNO hydrogels, and can be modulated in the range of 40 nmol/g h to 1.5 µmol/g h by changing the PAA:F127 mass ratio. Long-term NO-release profiles over 5 days are governed by the first-order exponential decay of GSNO, with half-lives in the range of 0.5-3.4 days. A preliminary in vivo study on full-thickness excisional wounds in mice showed that topical NO release from the PAA:F127/GSNO hydrogels is triggered by exudate absorption and leads to increased angiogenesis and collagen fiber organization, as well as TGF-ß, IGF-1, SDF-1, and IL-10 gene expressions in the cicatricial tissue. In summary, these results suggest that hydration-controlled NO release from topical PAA:F127/GSNO hydrogels is a potential strategy for enhancing wound healing. STATEMENT OF SIGNIFICANCE: The topical delivery of nitric oxide (NO) to wounds may provide significant beneficial results and represent a promising strategy to treat chronic wounds. However, wound dressings capable of releasing NO after application and allowing the modulation of NO release rates, demand new platforms. Here, we describe a novel strategy to overcome these challenges, based on the use of supramolecular poly(acrylic acid) (PAA):F127 hydrogels charged with the NO donor S-nitrosoglutathione (GSNO) from whereby the NO release can be triggered by exudate absorption and delivered to the wound at rates controlled by the PAA:F127 mass ratio. Preliminary in vivo results offer a proof of concept for this strategy by demonstrating increased angiogenesis; collagen fibers organization; and TGF-ß, IGF-1, SDF-1, and IL-10 gene expressions in the cicatricial tissue after topical treatment with a PAA:F127/GSNO hydrogel.

Functional poly(ε-caprolactone)/chitosan dressings with nitric oxide-releasing property improve wound healing.

Wound healing dressings are increasingly needed clinically due to the large number of skin damage annually. Nitric oxide (NO) plays a key role in promoting wound healing, thus biomaterials with NO-releasing property receive increasing attention as ideal wound dressing. In present study, we prepared a novel functional wound dressing by combining electrospun poly(ε-caprolactone) (PCL) nonwoven mat with chitosan-based NO-releasing biomaterials (CS-NO). As-prepared PCL/CS-NO dressing released NO sustainably under the physiological conditions, which was controlled by the catalysis of ß-galactosidase. In vivo wound healing characteristics were further evaluated on full-thickness cutaneous wounds in mice. Results showed that PCL/CS-NO wound dressings remarkably accelerated wound healing process through enhancing re-epithelialization and granulation formation and effectively improved the organization of regenerated tissues including epidermal-dermal junction, which could be ascribed to the pro-angiogenesis, immunomodulation, and enhanced collagen synthesis provided by the sustained release of NO. Therefore, PCL/CS-NO may be a promising candidate for wound dressings, especially for the chronic wound caused by the ischemia. STATEMENT OF SIGNIFICANCE: Serious skin damage caused by trauma, surgery, burn or chronic disease has become one of the most serious clinical problems. Therefore, there is an increasing demand for ideal wound dressing that can improve wound healing. Due to the vital role of nitric oxide (NO), we developed a novel functional wound dressing by combining electrospun polycaprolactone (PCL) mat with NO-releasing biomaterial (CS-NO). The sustained release of NO from PCL/CS-NO demonstrated positive effects on wound healing, including pro-angiogenesis, immunomodulation, and enhanced collagen synthesis. Hence, wound healing process was remarkably accelerated and the organization of regenerated tissues was effectively improved as well. Taken together, PCL/CS-NO dressing may be a promising candidate for wound treatment, especially for the chronic wound caused by the ischemia.

Characterization and in vivo performance of nitric oxide-releasing extracorporeal circuits in a feline model of thrombogenicity.

Infection and thrombosis are the two leading complications associated with blood contacting medical devices, and have led to the development of active materials that can delivery antibiotics or antithrombotic agents. Two key characteristics of these materials are the ability to produce controlled delivery, as well as minimal systemic delivery of the agent outside of the device site. Nitric oxide (NO) releasing materials are attractive as NO plays pivotal roles in the body's natural defense against bacterial infection, as well as regulation of platelet adhesion and activation. This work characterizes an NO-releasing extracorporeal circuit (ECC) under flow conditions for the first time, examining the effect of incubation and application of the top coating on leaching of NO donor and NO-release kinetics. Top coated ECCs with incubation delivered ca. 1% of the total NO potential over the 4-h period, whereas uncoated ECCs delivered over 4.5% of the total NO. Incubated ECC loops maintained a flux of 1.83 ± 0.50 × 10-10 mol min-1 cm-2 for the full 4 h duration. The NO-releasing ECC loops significantly increased the time-to-clot as compared to the corresponding control (11 ± 3.6 min control, 132 ± 93.0 min NO-releasing) when evaluated in vivo in a feline animal model. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 539-546, 2017.

Plasma-modified nitric oxide-releasing polymer films exhibit time-delayed 8-log reduction in growth of bacteria.

Tygon(®) and other poly(vinyl chloride)-derived polymers are frequently used for tubing in blood transfusions, hemodialysis, and other extracorporeal circuit applications. These materials, however, tend to promote bacterial proliferation which contributes to the high risk of infection associated with device use. Antibacterial agents, such as nitric oxide donors, can be incorporated into these materials to eliminate bacteria before they can proliferate. The release of the antimicrobial agent from the device, however, is challenging to control and sustain on timescales relevant to blood transport procedures. Surface modification techniques can be employed to address challenges with controlled drug release. Here, surface modification using H2O (v) plasma is explored as a potential method to improve the biocompatibility of biomedical polymers, namely, to tune the nitric oxide-releasing capabilities from Tygon films. Film properties are evaluated pre- and post-treatment by contact angle goniometry, x-ray photoelectron spectroscopy, and optical profilometry. H2O (v) plasma treatment significantly enhances the wettability of the nitric-oxide releasing films, doubles film oxygen content, and maintains surface roughness. Using the kill rate method, the authors determine both treated and untreated films cause an 8 log reduction in the population of both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. Notably, however, H2O (v) plasma treatment delays the kill rate of treated films by 24 h, yet antibacterial efficacy is not diminished. Results of nitric oxide release, measured via chemiluminescent detection, are also reported and correlated to the observed kill rate behavior. Overall, the observed delay in biocidal agent release caused by our treatment indicates that plasma surface modification is an important route toward achieving controlled drug release from polymeric biomedical devices.

Nitric oxide-releasing poly(lactic-co-glycolic acid)-polyethylenimine nanoparticles for prolonged nitric oxide release, antibacterial efficacy, and in vivo wound healing activity.

Nitric oxide (NO)-releasing nanoparticles (NPs) have emerged as a wound healing enhancer and a novel antibacterial agent that can circumvent antibiotic resistance. However, the NO release from NPs over extended periods of time is still inadequate for clinical application. In this study, we developed NO-releasing poly(lactic-co-glycolic acid)-polyethylenimine (PEI) NPs (NO/PPNPs) composed of poly(lactic-co-glycolic acid) and PEI/diazeniumdiolate (PEI/NONOate) for prolonged NO release, antibacterial efficacy, and wound healing activity. Successful preparation of PEI/NONOate was confirmed by proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, and ultraviolet/visible spectrophotometry. NO/PPNPs were characterized by particle size, surface charge, and NO loading. The NO/PPNPs showed a prolonged NO release profile over 6 days without any burst release. The NO/PPNPs exhibited potent bactericidal efficacy against methicillin-resistant Staphylococcus aureus (MRSA) and Pseudomonas aeruginosa concentration-dependently and showed the ability to bind on the surface of the bacteria. We also found that the NO released from the NO/PPNPs mediates bactericidal efficacy and is not toxic to healthy fibroblast cells. Furthermore, NO/PPNPs accelerated wound healing and epithelialization in a mouse model of a MRSA-infected wound. Therefore, our results suggest that the NO/PPNPs presented in this study could be a suitable approach for treating wounds and various skin infections.

Nitric oxide-eluting scaffolds and their interaction with smooth muscle cells in vitro.

Fabrication of scaffolds loaded with nitric oxide (NO) donors (S-nitrosoglutathione, GSNO, and isosorbide mononitrate, ISMN) with suitable cell compatibility and optimized properties for tissue-engineering applications is reported using "in situ" technique. Based on FDA-approved polymer, solvent and dosage forms, this gentle process allowed the incorporation of the GSNO labile drug into scaffolds made of either poly(lactide-co-glycolide) (PLGA) or PLGA/poly(ɛ-caprolactone) (PCL) blend. During scaffolds manufacturing process including washing cycles, NO donors were leached from scaffolds. However, GSNO and ISMN concentrations in the last washing medium (10(-7) M and 10(-4) M, respectively) were in the range of cell suitability for tissue engineering. Further morphological analyses indicated that smoother surfaces with fewer but bigger pores (compatible with cell penetration and ingrowth) were obtained with PLGA in comparison with PLGA/PCL scaffolds. Among all tested matrices, only unloaded PLGA and GSNO-loaded PLGA/PCL exhibited intermediate cell anchorage, with mitochondrial activity close to the control and an increase in protein content, a prognostic for scaffold cell colonization, defining them as promising candidates. Deeper analyses of these two scaffolds looking at intracellular redox balance through reactive oxygen species production, glutathione, S-nitrosothiols, and nitrite ions content exhibited GSNO-loaded PLGA/PCL as the best of all tested 3D scaffolds for tissue engineering.

Pulsed ultrasound enhances the delivery of nitric oxide from bubble liposomes to ex vivo porcine carotid tissue.

Ultrasound-mediated drug delivery is a novel technique for enhancing the penetration of drugs into diseased tissue beds noninvasively. By encapsulating drugs into microsized and nanosized liposomes, the therapeutic can be shielded from degradation within the vasculature until delivery to a target site by ultrasound exposure. Traditional in vitro or ex vivo techniques to quantify this delivery profile include optical approaches, cell culture, and electrophysiology. Here, we demonstrate an approach to characterize the degree of nitric oxide (NO) delivery to porcine carotid tissue by direct measurement of ex vivo vascular tone. An ex vivo perfusion model was adapted to assess ultrasound-mediated delivery of NO. This potent vasodilator was coencapsulated with inert octafluoropropane gas to produce acoustically active bubble liposomes. Porcine carotid arteries were excised post mortem and mounted in a physiologic buffer solution. Vascular tone was assessed in real time by coupling the artery to an isometric force transducer. NO-loaded bubble liposomes were infused into the lumen of the artery, which was exposed to 1 MHz pulsed ultrasound at a peak-to-peak acoustic pressure amplitude of 0.34 MPa. Acoustic cavitation emissions were monitored passively. Changes in vascular tone were measured and compared with control and sham NO bubble liposome exposures. Our results demonstrate that ultrasound-triggered NO release from bubble liposomes induces potent vasorelaxation within porcine carotid arteries (maximal relaxation 31%± 8%), which was significantly stronger than vasorelaxation due to NO release from bubble liposomes in the absence of ultrasound (maximal relaxation 7%± 3%), and comparable with relaxation due to 12 µM sodium nitroprusside infusions (maximal relaxation 32%± 3%). This approach is a valuable mechanistic tool for assessing the extent of drug release and delivery to the vasculature caused by ultrasound.

Sustained release nitric oxide from long-lived circulating nanoparticles.

The current limitations of nitric oxide (NO) delivery systems have stimulated an extraordinary interest in the development of compounds that generate NO in a controlled and sustained manner with a heavy emphasis on the treatment of cardiovascular disease states. This work describes the positive physiological response to the infusion of NO-releasing nanoparticles prepared using a new platform based on hydrogel/glass hybrid nanoparticles. When exposed to moisture, these nanoparticles slowly release therapeutic levels of NO, previously generated through thermal reduction of nitrite to NO trapped within the dry particles. The controlled and sustained release of NO observed from these nanoparticles (NO-np) is regulated by its hydration over extended periods of time. In a dose-dependent manner, circulating NO-np both decreased mean arterial blood pressure and increased exhaled concentrations of NO over a period of several hours. Circulating NO-np induced vasodilatation and increased microvascular perfusion during their several hour circulation lifetime. Control nanoparticles (control-np; without nitrite) did not induce changes in arterial pressure, although a decrease in the number of capillaries perfused and an increase in leukocyte rolling and immobilization in the microcirculation were observed. The NO released by the NO-np prevents the inflammatory response observed after infusion of control-np. These data suggest that NO release from NO-np is advantageous relative to other NO-releasing compounds, because it does not depend on chemical decomposition or enzymatic catalysis; it is only determined by the rate of hydration. Based on the observed physiological properties, NO-np has clear potential as a therapeutic agent and as a research tool to increase our understanding of NO signaling mechanisms within the vasculature.

Sensitive determination of nitric oxide in some rat tissues using polymer monolith microextraction coupled to high-performance liquid chromatography with fluorescence detection.

A simple, sensitive, selective, and low-cost method is proposed for rapidly determining nitric oxide (NO) in some rat tissues. Polymer monolith microextraction (PMME) using a poly(methacrylic acid-ethylene glycol dimethacrylate) (MAA-EGDMA) monolithic column was combined with derivatization of NO using 1,3,5,7-tetramethyl-8-(3',4'-diaminophenyl)-difluoroboradiaza-s-indacene (TMDABODIPY), and this was used to analyze the derivatives of NO by high-performance liquid chromatography (HPLC) with fluorescence detection at lambda (ex)/lambda (em) = 498/507 nm. The baseline separation of TMDABODIPY and its NO derivative is performed under simple conditions in which a C(18) column is used and eluted with 50 mmol L(-1) ethanolamine and methanol. The conditions for the extraction of NO derivatives were optimized. The limit of detection of NO was 2 x 10(-12) mol L(-1) (S/N = 3). The linearity range of the method was 9 x 10(-11)-4.5 x 10(-8) mol L(-1). The interday and intraday relative standard deviations were less than 5%. The proposed method was successfully applied to the determination of NO levels in some rat tissue samples including heart, kidney, and liver with recoveries varying from 87.1 to 95.2%.

Incorporation of nitric oxide-releasing crosslinked polyethyleneimine microspheres into vascular grafts.

Over the years, many attempts have been made to increase the patency of small- to medium-sized prosthetic vascular grafts. However, none of them has greatly affected long-term rates. Recently, nitric oxide (NO) has been shown to inhibit thrombus formation in such grafts, suggesting that local delivery of NO may help to increase graft patency. This study describes the site-specific delivery of NO by entrapping NO-releasing microspheres in the pores of a vascular graft. NO-releasing polyethyleneimine microspheres (PEIX) were developed using a novel water-in-oil emulsion technique involving chemical crosslinking with a bis-epoxide. The PEIX microspheres were then derivatized with NO forming the [N(O)NO]- moiety of the diazeniumdiolates formerly known as NONOates. These polymeric NO-releasing particles were found to spontaneously release 194 nmol NO/mg with a half-life of over 66 h under physiologic conditions. Fluorescein isothiocyanate-labeled microspheres were then embedded into the pores of a 60-micron nonreinforced Gore-tex vascular graft using a simple evacuation technique and evaluated for microsphere placement and NO release. Scanning electron microscopic analysis showed the microspheres entrapped in the pores of the vascular graft releasing 10 nmol NO/mg with a half-life of 51 h. The microspheres remained entrapped in the graft even after immersion and NO release, as confirmed by fluorescence of the medium. These results suggest that NO-releasing particles can be incorporated into the pores of a vascular graft to deliver therapeutic amounts of NO for the prevention of thrombosis in small-diameter prosthetic grafts.

In vivo biocompatibility and analytical performance of intravascular amperometric oxygen sensors prepared with improved nitric oxide-releasing silicone rubber coating.

The in vivo biocompatibility and analytical performance of amperometric oxygen-sensing catheters prepared with a new type of nitric oxide (NO)-releasing silicone rubber polymer (DACA/N2O2 SR) is reported. The NO-release silicone rubber coating contains diazeniumdiolated secondary amine sites covalently anchored to a dimethylsiloxane matrix. Narrow diameter (0.9 mm, o.d.) silicone rubber tubing coated with this polymer can be employed to construct functional oxygen-sensing catheters that release NO continuously at levels > 1 x 10(-10) mol/cm2-min for more than 20 h. In vivo evaluation of such sensors within the carotid and femoral arteries of swine over a 16-h time period demonstrates that sensors prepared with the new NO-release coating exhibit no significant platelet adhesion or thrombus formation, but control sensors (non-NO release) implanted within the same animals do show a high propensity for cell adhesion and bulk clot formation. Furthermore, the in vivo analytical data provided by sensors fabricated with NO-release coatings (N = 9) are shown to be statistically equivalent to PO2 levels measured in vitro on discrete samples of blood. Control sensors (N = 9) placed within the same animals yield average PO2 values that are statistically different (p < or = 0.05) (lower) from both the levels measured on discrete samples and those provided by the NO-release sensors over a 16-h in vivo monitoring period.