A sandwich-type electrochemical immunosensor based on Au-rGO composite for CA15-3 tumor marker detection.

A sensitive detection of carbohydrate antigen 15-3 (CA15-3) levels may allow for early diagnosis and monitoring the treatment of breast cancer, but this can only be made in routine clinical practice if low-cost immunosensors are available. In this work, we developed a sandwich-type electrochemical immunosensor capable of rapid detection of CA15-3 with an ultra-low limit of detection (LOD) of 0.08 fg mL-1 within a wide linear concentration range from 0.1 fg mL-1 to 1 µg mL-1. The immunosensor had a matrix of a layer-by-layer film of Au nanoparticles and reduced graphene oxide (Au-rGO) co-electrodeposited on screen-printed carbon electrodes (SPCE). The high sensitivity was achieved by using secondary antibodies (Ab2) labeled with horseradish peroxidase (HRP) in the presence of hydrogen peroxide (H2O2) as signal amplifiers, and hydroquinone (HQ) was used as an electron mediator. The immunosensor was selective for CA15-3 in human serum and artificial saliva samples, robust, and stable to permit storage at 4 °C for more than 30 days. With its high performance, the immunosensor may be incorporated into future point-of-care (POC) devices to determine CA15-3 in distinct biological fluids, including in blood and saliva samples.

A versatile and ultrasensitive molecularly imprinted electrochemiluminescence sensor with HRP-encapsulated liposome labeled by light-triggered click reaction for pesticide residues.

A novel approach for trace detection of fipronil with a molecularly imprinted electrochemiluminescence sensor (MIECLS) is proposed. The sensitivity is significantly improved via signal amplification of the enzymatic reaction of horseradish peroxidase (HRP) released from encapsulated liposomes which linked onto the template molecules after rebinding. The molecularly imprinted polymer membrane was prepared through the electropolymerization of monomers with fipronil as a template. After the elution of the template molecules, the analyte fipronil was reabsorbed into the cavities. HRP-encapsulated liposomes were linked to the target molecules by light-triggered click reaction. The higher the concentration of the target was, the more HRP-encapsulated liposomes were present on the molecularly imprinted polymer (MIP) sensor. Then, HRP was liberated from liposomes, and the catalytic degradation of hydrogen peroxide (H2O2) by HRP occurs, which changed the electrochemiluminescence intensity of luminol significantly. The change of the ∆ECL intensity was linearly proportional to the logarithm of the fipronil concentration ranging from 1.00 × 10-14 to 1.00 × 10-9 mol/L, and the detection limit was 7.77 × 10-16 mol/L. The recoveries obtained ranged from 95.7 to 105.8% with RSD < 5%. The sensitivity of the detection was significantly improved, and the analysis process was simplified in that the incubation step required in the conventional method was avoided. The sensor proposed provides a feasible platform for ultra-trace amount determination.

[Determination of Allyl Isothiocyanate in Mustard and Horseradish Extracts by Single Reference GC and HPLC Based on Relative Molar Sensitivities].

The main component of the Mustard and Horseradish extracts, which are used as natural food additives in Japan, is allyl isothiocyanate (AITC). The determination of AITC using GC-FID is the official method employed in the quality control assessments for these products. In this method, a commercially available AITC reagent is used as a calibrant. However, 1H-quantitative NMR (qNMR) analysis revealed that the AITC reagents contain impurity. Therefore, we examined the GC-FID and HPLC-refractive index detector (LC-RID) method based on relative molar sensitivities (RMSs) to high-purity single reference (SR). The RMSs of AITC/SR under the GC-FID and LC-RID conditions were accurately determined using qNMR. The AITC in two types of food additives was quantified using qNMR, SR GC-FID, and SR LC-RID methods. Both SR GC-FID and SR LC-RID showed good agreement within 2% with the AITC content determined by direct qNMR.

Chemical Signal Communication between Two Protoorganelles in a Lipid-Based Artificial Cell.

The chemical signal communication among organelles in the cell is extremely important for life. We demonstrate here the chemical signal communication between two protoorganelles using cascade enzyme reactions in a lipid-based artificial cell. Two protoorganelles inside the artificial cell are large unilamellar vesicles containing glucose oxidase (GOx-LUVs) and a vesicle containing horseradish peroxidase (HRP) and Amplex red, respectively. The glucose molecules outside the artificial cell penetrate the lipid bilayer through mellitin pores and enter into one protoroganelle (GOx-LUV) to produce H2O2, which subsequently is transported to the other protoorganelle to oxidize Amplex red into red resorufin catalyzed by HRP. The number of GOx-LUVs in an artificial cell is controlled by using a GOx-LUV solution with different density during the electroformation. The reaction rate for resorufin in the protoorganelle increases with more GOx-LUVs inside the artificial cell. The artificial cell developed here paves the way for a more complicated signal transduction mechanism study in a eukaryocyte.

Formulation and Structural Study of a Biocompatible Water-in-Oil Microemulsion as an Appropriate Enzyme Carrier: The Model Case of Horseradish Peroxidase.

A novel biocompatible water-in-oil microemulsion was developed using nonionic surfactants and was investigated as a potential enzyme delivery system for pharmaceutical applications. The system was composed of isopropyl myristate/polysorbate 80 (Tween 80)/distilled monoglycerides/water/propylene glycol (PG), had a low total surfactant concentration (8.3% w/w), and was able to incorporate approximately 3% w/w aqueous phase containing horseradish peroxidase (HRP). Structural and activity aspects of the system were studied using a variety of techniques such as dynamic light scattering (DLS), electron paramagnetic resonance (EPR), and dynamic interfacial tension. The apparent hydrodynamic diameter of the empty droplets was calculated at about 37 nm. Different enzyme concentrations, ranging from 0.01 to 1.39 µM, were used for both DLS and EPR studies to effectively determine the localization of the macromolecule in the microemulsion. According to the results, for high enzyme concentrations, a participation of HRP in the surfactant monolayer of the microemulsion is evident. The number of reverse micelles in the microemulsion was defined by a theoretical model and was used to clarify how the enzyme concentration affects the number of empty and loaded reverse micelles. To assure that the system allows the enzyme to retain its catalytic activity, an oxidative reaction catalyzed by HRP was successfully carried out with the use of the model substrate 2,2'-azino-bis[3-ethylbenzothiazoline-6-sulfonic acid]. The influence of several parameters such as temperature, pH, and PG concentration was examined to optimize the reaction conditions, and a kinetic study was conducted revealing an ordered-Bi-Bi mechanism. Values of all kinetic parameters were determined. The release of the encapsulated enzyme was studied using an adequate receiver phase, revealing the effectiveness of the proposed microemulsion not only as a microreactor but also as a carrier for therapeutic biomolecules.

Protecting Enzymatic Activity via Zwitterionic Nanocapsulation for the Removal of Phenol Compound from Wastewater.

Horseradish peroxidase (HRP) holds great potential in wastewater treatment. However, its instability in harsh environments remains a major issue. Various immobilization technologies were developed to retain enzyme stability at the cost of its effectiveness. We demonstrate that zwitterionic encapsulation of HRP retained both protein stability and activity to a large degree. In a water treatment study, encapsulating HRP into a zwitterionic nanogel resulted in a three-fold increase in the catalytic oxidation efficiency of phenol molecules. In addition, zwitterionic nanocapsules exhibited the best performance when compared with nanocapsules made from other hydrophilic polymers. These results indicated that zwitterionic HRP nanocapsules hold great potential in the decontamination of organic pollutants from wastewater.

Facile one-step targeted immobilization of an enzyme based on silane emulsion self-assembled molecularly imprinted polymers for visual sensors.

Immobilized enzymes play significant roles in many practical applications. However, the enzymes need to be purified before immobilization by conventional immobilizing methods, and the purification process is expensive, laborious, complicated and results in a decrease of the enzymatic activity. So, we present a novel method by a facile one-step targeted immobilization of an enzyme without a purification process from complex samples. For this purpose, a novel molecularly imprinted polymer was prepared via a silane emulsion self-assembly method using boric acid-modified Fe3O4 nanoparticles as magnetic nuclei, horseradish peroxidase as a template, 3-aminopropyltriethoxysilane as a functional monomer and tetraethyl orthosilicate as a crosslinking agent. The molecularly imprinted polymers were characterized using a scanning electron microscope, X-ray photoelectron spectroscope, vibrating sample magnetometer and X-ray diffractometer. The as-prepared and characterized materials were employed to immobilize horseradish peroxidase from a crude extract of horseradish. Moreover, the immobilized horseradish peroxidase was employed to develop visual sensors for the detection of glucose and sarcosine. This study demonstrated that the molecularly imprinted polymers prepared via the silane emulsion self-assembly method can facilely immobilize horseradish peroxidase from a crude extract of horseradish without any purification process. The developed visual method based on the immobilized horseradish peroxidase shows great potential applications for the visual detection of glucose and sarcosine.

Efficient enrichment of glycopeptides by supramolecular nanoassemblies that use proximity-assisted covalent binding.

Mass spectrometry (MS)-based analysis of glycoproteins and glycopeptides requires selective separation strategies to eliminate interferences from more abundant non-glycosylated biomolecules. In this work, we describe a two-phase liquid-liquid extraction method using supramolecular polymeric nanoassemblies that can selectively and efficiently enrich glycopeptides for enhanced MS detection. The polymeric nanoassemblies are made selective for glycopeptides via the incorporation of hydrazide functional groups that covalently bind to glycans. The enrichment efficiency is further enhanced via the incorporation of acidic functional groups that lead to a proximity-assisted catalysis of the hydrazide-glycan conjugation reaction. Our results further demonstrate the value of designer supramolecular nanomaterials for the selective enrichment of modified peptides from complicated mixtures.

Organic polymer dot-based fluorometric determination of the activity of horseradish peroxidase and of the concentrations of glucose and the insecticidal protein toxin Cry1Ab/Ac.

Fluorescent polymer dots (PDs) with maximum excitation/emission wavelengths of 410/515 nm were prepared in water solution from 1,4-benzoquinone and ethylenediamine. The green fluorescence of these PDs is screened off by the red-colored oxidation product (PPDox, maximum absorption at 510 nm) formed by horseradish peroxidase (HRP)-catalyzed oxidation of p-phenylenediamine (PPD). It causes the reduction of the fluorescence intensity of the PDs due to spectral overlap and an inner filter effect (IFE). If glucose is enzymatically oxidized under the formation of H2O2, the formed H2O2 can be quantified by the above IFE. The assay for HRP activity and glucose have detection limits of 0.2 U·L-1 and 0.1 µM, respectively. The nanoprobe was further extended to an immunosorbent assay (ELISA) for the determination of insecticidal Cry1Ab/Ac protein with a detection limit of 0.25 ng·mL-1. The ELISA was applied to rice leaf analysis. Graphic abstract Schematic representation of fluorometrict enzyme-linked immunosorbent assay for Cry1Ab/Ac protein detection based on horseradish peroxidase (HRP)-triggered fluorescence quenching of polymer dots (PDs). Quenching is caused by an inner filter effect (IFE) caused by PPDox, the oxidation product of p-phenylenediamine (PPD).

Polymeric Caffeic Acid Is a Safer Mucosal Adjuvant That Augments Antigen-Specific Mucosal and Systemic Immune Responses in Mice.

Infections remain a major threat to human lives. To overcome the threat caused by pathogens, mucosal vaccines are considered a promising strategy. However, no inactivated and/or subunit mucosal vaccine has been approved for human use, largely because of the lack of a safe and effective mucosal adjuvant. Here, we show that enzymatically synthesized polymeric caffeic acid (pCA) can act as a potent mucosal adjuvant in mice. Intranasal administration of ovalbumin (OVA) in combination with pCA resulted in the induction of OVA-specific mucosal IgA and serum IgG, especially IgG1. Importantly, pCA was synthesized from caffeic acid and horseradish peroxidase from coffee beans and horseradish, respectively, which are commonly consumed. Therefore, pCA is believed to be a highly safe material. In fact, administration of pCA did not show distinct toxicity in mice. These data indicate that pCA has merit for use as a mucosal adjuvant for nasal vaccine formulations.

A novel membrane-based process to isolate peroxidase from horseradish roots: optimization of operating parameters.

The optimization of operating parameters for the isolation of peroxidase from horseradish (Armoracia rusticana) roots with ultrafiltration (UF) technology was systemically studied. The effects of UF operating conditions on the transmission of proteins were quantified using the parameter scanning UF. These conditions included solution pH, ionic strength, stirring speed and permeate flux. Under optimized conditions, the purity of horseradish peroxidase (HRP) obtained was greater than 84 % after a two-stage UF process and the recovery of HRP from the feedstock was close to 90 %. The resulting peroxidase product was then analysed by isoelectric focusing, SDS-PAGE and circular dichroism, to confirm its isoelectric point, molecular weight and molecular secondary structure. The effects of calcium ion on HRP specific activities were also experimentally determined.

Preparation and evaluation of thiomer nanoparticles via high pressure homogenization.

The aim of this study was to establish and evaluate a high pressure homogenization method for the preparation of thiomer nanoparticles. Particles were formulated by incorporation of the model protein horseradish peroxidase in chitosan-glutathione (Ch-GSH) and poly(acrylic acid)-glutathione (PAA-GSH) via co-precipitation followed by air jet milling. The resulting microparticles were suspended in distilled water using an Ultraturax and subsequently micronized by high pressure homogenization. Finally, resulting particles were evaluated regarding size distribution, shape, zeta potential, drug load, protein activity and release behaviour. The mean particle size after 30 cycles with a pressure of 1500 bar was 538 +/- 94 nm for particles consisting of Ch-GSH and 638 +/- 94 nm for particles consisting of PAA-GSH. Nanoparticles of Ch-GSH had a positive zeta-potential of +1.03 mv, whereas nanoparticles from PAA-GSH had a negative zeta potential of -6.21 mv. The maximum protein load for nanoparticles based on Ch-GSH and based on PAA-GSH was 45 +/- 2% and 37 +/- %, respectively. The release profile of nanoparticles followed a first order release kinetic. Thiolated nanoparticles prepared by a high pressure homogenization technique were shown to be stable and provide controlled drug release characteristics. The preparation method described here might be a useful tool for a more upscaled production of nanoparticulate drug delivery systems.

Antimicrobial effects of mustard oil-containing plants against oral pathogens: an in vitro study.

BACKGROUND: The present study examines the antimicrobial activity of nasturtium herb (Tropaeoli maji herba) and horseradish root (Armoraciae rusticanae radix) against clinically important oral bacterial pathogens involved in periodontitis, gingivitis, pulpitis, implantitis and other infectious diseases. METHODS: A total of 15 oral pathogens, including members of the genera Campylobacter, Fusobacterium, Prevotella, Parvimonas, Porphyromonas, Tanerella, Veillonella, and HACEK organisms, were exposed to [1] a combination of herbal nasturtium and horseradish using a standardized gas test and [2] a mixture of synthetic Isothiocyantes (ITCs) using an agardilution test. Headspace gas chromatography mass spectrometry was employed to quantify the amount of allyl-, benzyl-, and 2- phenyl- ethyl-ITC. RESULTS: With exception of Veillonella parvula, all tested species were highly susceptible to herbal nasturtium and horseradish in the gas test with minimal inhibitory concentrations (MICs) between 50/20 mg and 200/80 mg and to synthetic ITCs in the agardilution with MICs between 0.0025 and 0.08 mg ITC/mL, respectively. Minimal bactericidal concentrations extended from 0.005 mg ITC/mL to 0.34 mg ITC/mL. CONCLUSIONS: ITCs may be considered an interesting alternative to antibiotics for prevention and treatment of oropharyngeal infections, periodontitis and related diseases. Furthermore, the suitability of ITCs for endocarditis prophylaxis in dental procedures might be worth further investigation.

Polymersome-Based Modular Nanoreactors with Size-Selective Transmembrane Permeability.

Polymersome nanoreactors encapsulating the enzymes or particulate catalysts attract interest because of their potential use as modular reactors to synthesize complex compounds via a cascade of chemical reactions in a single batch. To achieve these goals, a key requirement is the tunable permeability of the polymersome membrane, which allows the size-selective transportation of reagents and products while protecting the encapsulated catalysts during the chemical reaction. We report here a stimuli-responsive route for controlling the permeability of the polymersomes of the binary blend of poly(ethylene glycol)-b-polystyrene (PEG-b-PS) and poly(ethylene glycol)-b-poly(acrylbenzylborate) (PEG-b-PABB). The presence of H2O2 (1 mM) in the medium (0.1 M PBS, pH 7.4) triggers the oxidation of benzyl borate pendants of PABB to form poly(acrylic acid) (PAA). This transformation results in the perforation of the compartmentalizing membrane of polymersomes by the dissolution of PEG-b-PAA domains embedded in the inert PEG-b-PS matrix. By controlling the composition of the stimuli-responsive block copolymer, the polymersomes of the binary blend exhibit size-selective permeability without losing the structural integrity. Release of fluorescent guests with different sizes (fluorescein, PEG2k-Cm, PEG5k-Rho) can be controlled by tuning the composition (PEG-b-PS/PEG-b-PABB = 100/0-80/20) of blended polymersomes. Selective permeability of the membrane provides protection of the encapsulated enzymes from external proteases present in the medium, resulting in the one-pot synthesis of small molecules via cascades of chemical reactions. The nanoparticular catalysts are also encapsulated within the permeable polymersomes, serving as modular reactors for the conversion of organic compounds via a cascade of reactions.

Enzyme induced molecularly imprinted polymer on SERS substrate for ultrasensitive detection of patulin.

We designed a new type of MIP-SERS substrate for specific and label-free detection of patulin (PAT), by combining molecular imprinting polymer (MIP) selectivity and SERS technology sensitivity. Initially, the solid substrate of PDMS/AAO was prepared using poly dimethylsiloxane (PDMS) concreted anodized aluminum oxide (AAO) template. Then moderate Au was sputtered on the surface of PDMS/AAO to obtain Au/PDMS/AAO SERS substrate. Based on the HRP enzyme initiated in situ polymerization on the Au/PDMS/AAO, the MIP-SERS substrate was successfully synthesized with selective polymer and high tense of SERS "hot spots". The new MIP-SERS substrate showed strong SERS enhancement effect and good selectivity for PAT. Besides, the results showed that the method owned a linear range from 5 × 10-10 to 10-6 M with the limit of detection (LOD) of 8.5 × 10-11 M (S/N = 3) for PAT. The proposed method also exhibited acceptable reproducibility (relative standard deviation, RSD = 4.7%)，good stability (Raman intensity is above 80% after two weeks) and recoveries from 96.43% to 112.83% with the average RSD of 6.3%. The substrate is easy to use without complex sample pretreatment, which makes it a potential candidate as a rapid and sensitive detection method in food samples.

Controlled graft polymerization on the surface of filter paper via enzyme-initiated RAFT polymerization.

This study reports on eco-friendly graft polymerization approach for the modification of a cellulosic material via combination between enzymatic catalysis and reversible addition-fragmentation chain transfer polymerization (RAFT). Polyacrylamide (PAM) was polymerized on a cellulosic filter paper via horseradish peroxidase (HRP)-initiated RAFT polymerization. The results of grafting ratio, conversion, and pseudo-first-order kinetics were proved that the PAM graft polymerization on the filter paper followed RAFT rules. The results of Attenuated total reflection (ATR-FTIR), elemental analysis, and X-ray photoelectron spectroscopy (XPS) confirmed the presence of PAM in PAM-grafted filter paper. The results of water contact angle and Thermogravimetric analysis (TG) evidenced the change in the wetting properties and thermal performance, respectively of the treated filter paper. This work provides a new environmentally approach to graft polymerization on cellulosic materials.

Self-assembly of a magnetic DNA hydrogel as a new biomaterial for enzyme encapsulation with enhanced activity and stability.

We provide a new strategy to construct a magnetic DNA hydrogel for enzyme encapsulation through a programmable one-pot self-assembly approach, which can be easily separated from the reaction medium. The encapsulated enzyme composites exhibited significantly improved enzymatic activity, stability, reusability and excellent selectivity for the detection of low concentrations of glucose.

Assessment of immunoglobulin capture in immobilized protein A through automatic bead injection.

The repeatable immobilization of molecular recognition elements onto particle surfaces has a strong impact on the outcomes of affinity-based assays. In this work, an automatic method for the immobilization of immunoglobulin G (IgG) onto protein A-Sepharose microbeads was established through the flow programming features of the portable lab-on-valve platform using micro-bead injection spectroscopy. The reproducible packing of protein A-microbeads between two optic fibers was feasible, allowing on-column probing of IgG retention. The automation of solutions handling and the precise control of time of IgG interaction with the beads rendered repeatable immobilization cycles, within a short timeframe (<2 min). The proposed method featured the preparation of disposable immunosorbents for downstream analytical applications, such as immunosensing or microenrichment of target analytes. In-situ quantification of IgG@protein A-microbeads was carried out using a horseradish peroxidase-labeled detection IgG. The colorimetric oxidation of 3,3',5,5'-tetramethylbenzidine was monitored on-column. Quantitation of mouse and human IgG immobilized@protein A-microbeads was achieved for loading masses between 0.1 and 0.4 µg per ca. 5.5 mg of sorbent. The implemented detection strategy allowed the quantification of human IgG in certified human serum (ERM®- DA470k/IFCC) and spiked saliva, yielding recoveries of 102-108% and requiring minimal volume (1-15 µL) from serum and saliva.

A pH-responsive bioassay for paper-based diagnosis of exosomes via mussel-inspired surface chemistry.

The analysis of exosomes, which shows an increasing potential as prognostic biomarkers for non-invasive cancer diagnosis, can reveal their biological functions and disease associations. Nevertheless, the development of a convenient and quantitative method for determination of exosomes is still challenging. Herein, a novel approach for exosome quantification using pH test paper is developed via HRP-mediated promotion of mussel-inspired surface engineering and reagent-free functionalization of urease molecules. Uerase can hydrolyse urea into ammonia and carbon dioxide, and simultaneously raise the pH value of the solution. By establishing the relationship between exosome recognition and the change of pH value of the sensing solution, we can directly employ the low-cost, widely used and commercially available pH test paper to quantitatively analyse exosomes. The pH-responsive bioassay enables sensitive detection of exosomes with a detection of limit down to 4.46 × 103 particles/µL and can be successfully applied for determination of exosomes in clinical specimens. The versatility and reliability of our sensing platform may open up opportunities towards paper-based diagnosis of cancer.

Colorimetric multienzymatic smart sensors for hydrogen peroxide, glucose and catechol screening analysis.

In this work, we present a smartphone-based multiplexed enzymatic biosensor utilizing the unique colorimetric properties of the poly(aniline-co-anthranilic acid) (ANI-co-AA) composite film coupled with horseradish peroxidase (HRP), glucose oxidase (GOx), horseradish peroxidase-glucose oxidase (GOx-HRP) and tyrosinase (Tyr) enzymes. The enzymes are immobilized on the composite polymer film by adsorption and they catalyze a reversible redox color change of the host polymer from green to blue in the presence of their substrate. A smartphone was applied as color detector, for image acquisition and data handling. A ColorLab® android application, free of charge software application, was used to enable easy and clear display of the sensors' response indicating remarkable changes in the optical features. The results were confirmed by the spectrophotometric measurements. The developed colorimetric enzymatic biosensors were studied and optimized in relation to different experimental parameters. Moreover, the colorimetric enzymatic biosensors were applied to food and pharmaceutical analysis. It has been shown by these studies that the colorimetric biosensors are promising as quick and simple tests for handheld analysis in various fields.