The in vivo anatomy of the deep circumflex iliac artery perforators: defining the role for the DCIA perforator flap.

The deep circumflex iliac artery (DCIA) provides a dependable option for use as an osteo-musculo-cutaneous flap, particularly in mandibular reconstruction. Modifications to flaps based on DCIA perforators have been sought to prevent donor site morbidity as a consequence of muscle cuff harvest. Previous studies have been inconsistent in their descriptions of perforator anatomy, and means of assessing these preoperatively have not been widely described. A clinical anatomical study was undertaken, with a cohort of 44 hemiabdominal walls in 22 consecutive patients undergoing preoperative computed tomographic angiography (CTA) before free flap surgery. The feasibility of CTA and the regional vascular anatomy were both assessed. The use of CTA was shown to demonstrate DCIA perforators with high resolution and to be able to assess vessel size and location. In 44 hemiabdominal walls, there were 44 perforators of >0.8 mm diameter. There were no suitable perforators in 40% of sides, with 32% of sides having one perforator >0.8 mm diameter, 16% having two perforators, <10% had three perforators, and only one side had over four perforators. Perforators emerged from the deep fascia on an average of 5.1 cm cranial and 3.9 cm posterior to the anterior superior iliac spine (ASIS). Of the 44 perforators identified, 82% of perforators were located within a 4 cm by 4 cm area, 3 cm superior, and 2 cm posterior to the ASIS. The current study has demonstrated the utility of preoperative CTA for identifying DCIA perforators, and for selecting patients who may be suitable for a DCIA perforator flap given the variable perforator anatomy.

The influence of competitive flow on graft patency.

To evaluate the effects of competitive flow, bilateral aorto-iliac ePTFE grafts, 10 cm in length and with an internal diameter of 6 mm, were placed in ten mongrel dogs. On one side the external iliac artery was ligated (the control side); on the opposite side (the experimental side) flow continued through the native aorto-iliac system, as well as the graft, to allow a situation of competitive flow. Flow measurements showed the experimental graft carried 38.6% of the total blood flow going to the ipsilateral external iliac artery. After 30 days the grafts were exposed and patency and flow were evaluated by Doppler ultrasound. The control side showed 60% patency; all of the grafts on the experimental side were occluded. In addition, complete endothelial healing was observed at the occluded ostia of all experimental grafts. We conclude that competitive flow does influence graft patency and that graft thrombosis appears to be a relatively early phenomenon, as evidenced by the endothelial healing which occurred.

Vascular healing and integration of a fully bioresorbable everolimus-eluting scaffold in a rabbit iliac arterial model.

AIMS: We aimed to investigate a fully bioresorbable poly-l-lactide (PLLA) scaffold to assess vascular remodelling in comparison to a permanent polymeric metal DES. METHODS AND RESULTS: Twenty-five New Zealand white rabbits received an Absorb bioresorbable vascular scaffold (BVS, 1.0 and 1.1) or a CYPHER sirolimus-eluting stent (SES) in the iliac arteries. Twelve arteries were harvested at one month for scanning electron microscopy (SEM) analysis (BVS 1.1). The other implanted (BVS 1.0) arteries (n=32) were explanted at three, six and 36 months for light microscopic analysis. Re-endothelialisation assessed at one month was incomplete in both BVS and SES by SEM, with a trend towards greater coverage in SES (endothelialisation above strut: 32.2% vs. 60.6%, p=0.10). However, light microscopic analysis at later time points revealed greater endothelial coverage in BVS than in SES at 36 months (100.0% vs. 93.3%, p=0.05). Inflammation scores were comparable between arteries implanted with BVS and SES at three months (1.1 vs. 1.1, p=0.99), which decreased over time in the BVS implanted arteries (36 months: 0.0 vs. 0.2, p=0.05). At 36 months, BVS were completely resorbed, and resorption sites were replaced by connective tissue. CONCLUSIONS: BVS in the rabbit iliac artery model demonstrated ongoing vascular healing at three and six months, and complete vessel restoration, re-endothelialisation and no to minimal vascular inflammation at 36 months.

Evaluation of tubular poly(trimethylene carbonate) tissue engineering scaffolds in a circulating pulsatile flow system.

Tubular scaffolds (internal diameter approximately 3 mm and wall thickness approximately 0.8 mm) with a porosity of approximately 83% and an average pore size of 116 µm were prepared from flexible poly(trimethylene carbonate) (PTMC) polymer by dip-coating and particulate leaching methods. PTMC is a flexible and biocompatible polymer that crosslinks upon irradiation; porous network structures were obtained by irradiating the specimens in vacuum at 25 kGy before leaching soluble salt particles. To assess the suitability of these scaffolds in dynamic cell culturing for cardiovascular tissue engineering, the scaffolds were coated with a thin (0.1 to 0.2 mm) non-porous PTMC layer and its performance was evaluated in a closed pulsatile flow system (PFS). For this, the PFS was operated at physiological conditions at liquid flows of 1.56 ml/s with pressures varying from 80-120 mmHg at a frequency of 70 pulsations per minute. The mechanical properties of these coated porous PTMC scaffolds were not significantly different than non-coated scaffolds. Typical tensile strengths in the radial direction were 0.15 MPa, initial stiffness values were close to 1.4 MPa. Their creep resistance in cyclic deformation experiments was excellent. In the pulsatile flow setup, the distention rates of these flexible and elastic scaffolds were approximately 0.10% per mmHg, which is comparable to that of a porcine carotid artery (0.11% per mmHg). The compliance and stiffness index values were close to those of natural arteries.?In long-term deformation studies, where the scaffolds were subjected to physiological pulsatile pressures for one week, the morphology and mechanical properties of the PTMC scaffolds did not change. This suggests their suitability for application in a dynamic cell culture bioreactor.

Evaluation of the efficacy and safety of a stent covered with biosynthetic cellulose in a rabbit iliac artery model.

OBJECTIVES: We sought to test the efficacy and safety of the implantation of a stent covered with biosynthetic cellulose compared to a conventional bare-metal stent (BMS) in a rabbit iliac artery model. BACKGROUND: Biosynthetic cellulose is a biocompatible film used in several fields of medicine. Stents covered with biosynthetic cellulose are devices with the potential of achieving total lesion coverage, acting as a physical barrier to the migration of smooth muscle cells from the artery wall to the arterial lumen, and capturing circulating endothelial progenitor cells that may form a functional endothelial layer. METHODS AND RESULTS: Seven BMS and 7 stents covered with biosynthetic cellulose were implanted in the iliac arteries of 7 rabbits. Angiographic restudy and morphometric analysis of the specimens were performed after 4 weeks. No intrastent angiographic restenosis was observed, either with BMS or with stents covered with biosynthetic cellulose. There was also no acute or late vessel occlusion caused by stent thrombosis in either group. In the BMS and biosynthetic cellulose stented groups, respectively, mean neointimal thicknesses were 0.18 +/- 0.02 mm and 0.35 +/- 0.02 mm*; lumen area, 4.6 +/- 0.43 mm2 and 4.04 +/- 0.42 mm2; neointimal area, 0.58 +/- 0.09 mm2 and 2.13 +/- 0.11 mm(2)*; % lumen, 79.09 +/- 1.6% and 58.44 +/- 3.26%*; % stenosis, 10.97 +/- 1.23% and 35.55 +/- 3.39%* (*p < 0.05 vs. bare-metal). CONCLUSIONS: Implantation of stents covered with biosynthetic cellulose was safe, with no acute or late vessel occlusion caused by stent thrombosis, although it resulted in a more pronounced absolute neointimal thickness when compared to BMS.

The surgical anatomy of the blood supply to the femoral head: description of the anastomosis between the medial femoral circumflex and inferior gluteal arteries at the hip.

The inferior gluteal artery is described in standard anatomy textbooks as contributing to the blood supply of the hip through an anastomosis with the medial femoral circumflex artery. The site(s) of the anastomosis has not been described previously. We undertook an injection study to define the anastomotic connections between these two arteries and to determine whether the inferior gluteal artery could supply the lateral epiphyseal arteries alone. From eight fresh-frozen cadaver pelvic specimens we were able to inject the vessels in 14 hips with latex moulding compound through either the medial femoral circumflex artery or the inferior gluteal artery. Injected vessels around the hip were then carefully exposed and documented photographically. In seven of the eight specimens a clear anastomosis was shown between the two arteries adjacent to the tendon of obturator externus. The terminal vessel arising from this anastomosis was noted to pass directly beneath the posterior capsule of the hip before ascending the superior aspect of the femoral neck and terminating in the lateral epiphyseal vessels. At no point was the terminal vessel found between the capsule and the conjoined tendon. The medial femoral circumflex artery receives a direct supply from the inferior gluteal artery immediately before passing beneath the capsule of the hip. Detailed knowledge of this anatomy may help to explain the development of avascular necrosis after hip trauma, as well as to allow additional safe surgical exposure of the femoral neck and head.

Simultaneous measurements of arterial diameter and blood pressure to determine the arterial compliance, wall mechanics and stresses in vivo.

BACKGROUND: to develop a periarterial dimensional clip-probe which, associated with endovascular pressure measurement, real-time digital signal processing/data treatment systems, enables characterisation of the basic wall mechanics in given arterial sites. DESIGN: experimental study. MATERIAL: a facing pair of ultrasonic crystals was incorporated in periarterial highlight probes, made of sterilisable silicone and manufactured from computer-designed stainless steel casts. The A/D converted diameter and pressure (from an endovascular micro-tip probe) signals, triggered by the ECG, were on-line processed to provide their respective profiles during an averaged cardiac cycle, and subsequently the arterial wall physics. The technique was tested in the iliac and renal arteries in eight pigs. RESULTS: the technique was found to indicate adequately that arterial responses to distending blood pressure, as given by Petersons modulus and relative pulsatility, were identical in renals and iliacs. In contrast, the compliance, circumferential incremental elastic modulus and midwall circumferential stress were higher in iliacs than in renals, whereas arterial stiffness of the renals surpassed that of the iliacs. DISCUSSION: the technique with sterilisable probes produces in vivo pressure-diameter relationships, arterial compliance, and wall mechanics and stresses, whatever the arterial size. The porcine iliacs and renals are elastic and viscorigid arteries, respectively.

Biologic response to polymer-coated stents: in vitro analysis and results in an iliac artery sheep model.

PURPOSE: To evaluate biologic response to poly(hydroxymethyl-p-xylylene-co-p-xylylene) (PHPX)-coated stents in vitro and in vivo in sheep. MATERIALS AND METHODS: Physical stability, hemocompatibility, and cytotoxicity of the coating were first assessed in vitro. Thirty-six self-expanding nitinol (Memotherm), 24 stainless steel balloon-mounted (Palmaz), and 12 self-expanding nitinol (ZA) stents were coated with PHPX by using chemical vapor deposition polymerization. Seventy-two coated and 72 uncoated stents were placed into iliac arteries of 36 sheep. Sheep were classified into three groups of 12 animals each. In each group, six sheep were killed after 1 month; six, after 6 months. In each sheep, two uncoated stents were placed into one limb; two coated stents of the same type, into the opposite limb. In groups 1 and 2, Palmaz and Memotherm stents were used; in group 3, Memotherm and ZA stents were used. In groups 1 and 3, arteries were healthy. In group 2, arteries were pretreated with a Fogarty maneuver. Stent patency was measured with intravascular ultrasonography (US) and histologic analysis. Cellular response to coated and uncoated stents was assessed. Measurements were compared (Wilcoxon test). RESULTS: In vitro, PHPX coating was stable; hemocompatibility and cytotoxicity were similar to those of stainless steel. In vivo, patency of coated and uncoated Palmaz and ZA stents was not different (P >.05). Patency of coated and uncoated Memotherm stents did not differ in four of six follow-up subgroups, but it was significantly reduced in group 2 after 6 months (intravascular US, P =.03; histologic analysis, P =.01) and in group 3 after 1 month (histologic analysis, P =.01). Histologically, the cellular response to coated and uncoated stents was not different (P >.05). CONCLUSION: PHPX coating had good physical stability and biocompatibility in vitro and in vivo. Performance of coated and uncoated Palmaz and ZA stents was similar. Patency of Memotherm stents was similar in four of six follow-up subgroups. Materials effects did not result in severely enhanced neointimal hyperplasia.

Wall shear stress distribution in a model canine artery during steady flow.

The wall shear stress pattern was measured in a rigid plastic cast of a canine artery during steady flow by means of an electrochemical technique. The topographic distribution of shear stress is very nonuniform, with regions of high and low shear in close proximity. The steady shear stresses are highest at the leading edge of flow dividers and at the entrance regions to branch vessels. The shapes of the shear stress curves in the celiac branch are primarily a function of the ratio of branch flow to total aortic flow. However, the shapes of the shear stress curves in the adjacent anterior mesenteric branch remain the same for different anterior mesenteric branch flow ratios, although the shear increases with the branch flow ratio. An unstable pattern of flow separation and reattachment is found at the anterior mesenteric flow divider lip and remains localized to that region. A correlation is suggested between sites of high shear stress, extremes in the range of stress, and unstable stress patterns and sites at which atherosclerosis has been shown to develop.

Effect of low-grade conductive heating on vascular compliance during in vitro balloon angioplasty.

Radiofrequency-powered, thermal balloon angioplasty is a new technique that enhances luminal dilatation with less dissection than conventional angioplasty. The purpose of this study was to assess the effect of radiofrequency heating of balloon fluid on the pressure-volume mechanics of in vitro balloon angioplasty and to determine the histologic basis for thermal-induced compliance changes. In vitro, radiofrequency-powered, thermal balloon angioplasty was performed on 46 paired iliac segments freshly harvested from 23 nonatherosclerotic pigs. Balloon inflations at 60 degrees C were compared to room temperature inflations in paired arterial segments. Intraballoon pressure and volume were recorded during each inflation as volume infusion increased pressure over a 0 to 10 atm range. Pressure-volume compliance curves were plotted for all dilatations. Six segments were stained to assess the histologic abnormalities associated with thermal compliance changes. Radiofrequency heating acutely shifted the pressure-volume curves rightward in 20 of 23 iliac segments compared to nonheated controls. This increase in compliance persisted after heating and exceeded the maximum compliance shift caused by multiple nonheated inflations in a subset of arterial segments. Histologically, heated segments showed increased thinning and compression of the arterial wall, increased medial cell necrosis and altered elastic tissue fibers compared to nonheated specimens. In conclusion, radiofrequency heating of intraballoon fluid to 60 degrees C acutely increases vascular compliance during in vitro balloon angioplasty of nonatherosclerotic iliac arteries. The increased compliance persists after heating and can be greater than the compliance shifts induced by multiple conventional dilatations. Arterial wall thinning and irreversible alteration of elastic tissue fibers probably account for thermal compliance changes.