Multidisciplinary Team of Chemists and Geneticists Working to Reclaim Value Embedded in Plastics.

This invited Team Profile was created by Clay C. C. Wang. He and his collaborators recently published an article on the conversion of polyethylenes to fungal secondary metabolites. First, the team employs an oxidative catalytic process, highly tolerant of impurities, to degrade post-consumer polyethylenes to carboxylic diacids. Then, they utilize engineered strains of the fungus Aspergillus nidulans to convert these diacids to structurally diverse and pharmacologically active secondary metabolites. "Conversion of Polyethylenes into Fungal Secondary Metabolites", C. Rabot, Y. Chen, S. Bijlani, Y.-M. Chiang, C. E. Oakley, B. R. Oakley, T. J. Williams, C. C. C. Wang, Angew. Chem. Int. Ed. 2023, e202214609; Angew. Chem. 2023, e202214609.

Conversion of Polyethylenes into Fungal Secondary Metabolites.

Waste plastics represent major environmental and economic burdens due to their ubiquity, slow breakdown rates, and inadequacy of current recycling routes. Polyethylenes are particularly problematic, because they lack robust recycling approaches despite being the most abundant plastics in use today. We report a novel chemical and biological approach for the rapid conversion of polyethylenes into structurally complex and pharmacologically active compounds. We present conditions for aerobic, catalytic digestion of polyethylenes collected from post-consumer and oceanic waste streams, creating carboxylic diacids that can then be used as a carbon source by the fungus Aspergillus nidulans. As a proof of principle, we have engineered strains of A. nidulans to synthesize the fungal secondary metabolites asperbenzaldehyde, citreoviridin, and mutilin when grown on these digestion products. This hybrid approach considerably expands the range of products to which polyethylenes can be upcycled.

Redesigning the Aspergillus nidulans xylanase regulatory pathway to enhance cellulase production with xylose as the carbon and inducer source.

BACKGROUND: Biomass contains cellulose (C6-sugars), hemicellulose (C5-sugars) and lignin. Biomass ranks amongst the most abundant hydrocarbon resources on earth. However, biomass is recalcitrant to enzymatic digestion by cellulases. Physicochemical pretreatment methods make cellulose accessible but partially destroy hemicellulose, producing a C5-sugar-rich liquor. Typically, digestion of pretreated LCB is performed with commercial cellulase preparations, but C5-sugars could in principle be used for "on site" production of cellulases by genetically engineered microorganism, thereby reducing costs. RESULTS: Here we report a succession of genetic interventions in Aspergillus nidulans that redesign the natural regulatory circuitry of cellulase genes in such a way that recombinant strains use C5-sugar liquors (xylose) to grow a vegetative tissue and simultaneously accumulate large amounts of cellulases. Overexpression of XlnR showed that under xylose-induction conditions only xylanase C was produced. XlnR overexpression strains were constructed that use the xynCp promoter to drive the production of cellobiohydrolases, endoglucanases and ß-glucosidase. All five cellulases accumulated at high levels when grown on xylose. Production of cellulases in the presence of pretreated-biomass C5-sugar liquors was investigated, and cellulases accumulated to much higher enzyme titers than those obtained for traditional fungal cell factories with cellulase-inducing substrates. CONCLUSIONS: By replacing expensive substrates with a cheap by-product carbon source, the use of C5-sugar liquors directly derived from LCB pretreatment processes not only reduces enzyme production costs, but also lowers operational costs by eliminating the need for off-site enzyme production, purification, concentration, transport and dilution.

A fungal ball within a maxillary sinus with dental root canal filler and rare fungal propagules.

A fungal ball of a maxillary sinus sometimes includes dental treatment-related foreign material because the sinus is close to the root of the upper teeth. We present a case of right maxillary sinus fungal ball with a gutta-percha point, a dental root canal filler. X-ray analysis of the foreign material in the paraffin section of the fungal ball successfully detected zinc, sulfur, and barium, all of which were constituents of the gutta-percha point. The gutta-percha point might have facilitated the formation of the fungal ball through disruption of the sinus-clearing mechanism. Another interesting histological feature of the fungal ball was the finding of calcium oxalate crystals and non-hyphal fungal elements such as cleistothecia, Hülle cells, and conidial heads. This is the first report of such a combination being found in a specimen of human fungal disease. Although fungal culture was not available in the present case, molecular analysis of the formalin-fixed paraffin-embedded tissue of the fungal ball succeeded in revealing only DNA sequences of Aspergillus nidulans and some other environmental Aspergillus spp.

McmA-dependent and -independent regulatory systems governing expression of ClrB-regulated cellulase and hemicellulase genes in Aspergillus nidulans.

Fungal cellulolytic and hemicellulolytic enzymes are promising tools for industrial hydrolysis of cellulosic biomass; however, the regulatory network underlying their production is not well understood. The recent discovery of the transcriptional activators ClrB and McmA in Aspergillus nidulans implied a novel regulatory mechanism driven by their interaction, experimental evidence for which was obtained from transcriptional and DNA-binding analyses in this study. It was found that ClrB was essential for induced expression of all the genes examined in this study, while McmA dependency of their expression was gene-dependent. DNA-binding studies revealed McmA assisted in the recruitment of ClrB to the cellulose-responsive element (CeRE) in the promoters of eglA and eglB, expression of which was significantly reduced in the mcmA mutant. The CCG triplet within the CeRE served as the recognition sequence for the ClrB monomer. In contrast, ClrB did not require McmA for binding as a homodimer to the CGGN8 CCG sequences in the promoter of mndB, expression of which was affected less in the mcmA mutant than in all other examined genes. Thus, there are two types of ClrB-mediated regulation: McmA-assisted and McmA-independent. This novel McmA-ClrB synergistic system provides new insights into the complex regulatory network involved in cellulase and hemicellulase production.

Structural and functional characterization of a highly secreted α-l-arabinofuranosidase (GH62) from Aspergillus nidulans grown on sugarcane bagasse.

Carbohydrate-Active Enzymes are key enzymes for biomass-to-bioproducts conversion. α-l-Arabinofuranosidases that belong to the Glycoside Hydrolase family 62 (GH62) have important applications in biofuel production from plant biomass by hydrolyzing arabinoxylans, found in both the primary and secondary cell walls of plants. In this work, we identified a GH62 α-l-arabinofuranosidase (AnAbf62Awt) that was highly secreted when Aspergillus nidulans was cultivated on sugarcane bagasse. The gene AN7908 was cloned and transformed in A. nidulans for homologous production of AnAbf62Awt, and we confirmed that the enzyme is N-glycosylated at asparagine 83 by mass spectrometry analysis. The enzyme was also expressed in Escherichia coli and the studies of circular dichroism showed that the melting temperature and structural profile of AnAbf62Awt and the non-glycosylated enzyme from E. coli (AnAbf62Adeglyc) were highly similar. In addition, the designed glycomutant AnAbf62AN83Q presented similar patterns of secretion and activity to the AnAbf62Awt, indicating that the N-glycan does not influence the properties of this enzyme. The crystallographic structure of AnAbf62Adeglyc was obtained and the 1.7Å resolution model showed a five-bladed ß-propeller fold, which is conserved in family GH62. Mutants AnAbf62AY312F and AnAbf62AY312S showed that Y312 was an important substrate-binding residue. Molecular dynamics simulations indicated that the loop containing Y312 could access different conformations separated by moderately low energy barriers. One of these conformations, comprising a local minimum, is responsible for placing Y312 in the vicinity of the arabinose glycosidic bond, and thus, may be important for catalytic efficiency.

Analysis of the ionic interaction between the hydrophobin RodA and two cutinases of Aspergillus nidulans obtained via an Aspergillus oryzae expression system.

Hydrophobins are amphipathic secretory proteins with eight conserved cysteine residues and are ubiquitous among filamentous fungi. In the fungus Aspergillus oryzae, the hydrophobin RolA and the polyesterase CutL1 are co-expressed when the sole available carbon source is the biodegradable polyester polybutylene succinate-co-adipate (PBSA). RolA promotes the degradation of PBSA by attaching to the particle surface, changing its structure and interacting with CutL1 to concentrate CutL1 on the PBSA surface. We previously reported that positively charged residues in RolA and negatively charged residues in CutL1 are cooperatively involved in the ionic interaction between RolA and CutL1. We also reported that hydrophobin RodA of the model fungus Aspergillus nidulans, which was obtained via an A. oryzae expression system, interacted via ionic interactions with CutL1. In the present study, phylogenetic and alignment analyses revealed that the N-terminal regions of several RolA orthologs contained positively charged residues and that the corresponding negatively charged residues on the surface of CutL1 that were essential for the RolA-CutL1 interaction were highly conserved in several CutL1 orthologs. A PBSA microparticle degradation assay, a pull-down assay using a dispersion of Teflon particles, and a kinetic analysis using a quartz crystal microbalance revealed that recombinant A. nidulans RodA interacted via ionic interactions with two recombinant A. nidulans cutinases. Together, these results imply that ionic interactions between hydrophobins and cutinases may be common among aspergilli and other filamentous fungi.

Immobilization of LccC Laccase from Aspergillus nidulans on Hard Surfaces via Fungal Hydrophobins.

Fungal hydrophobins are small amphiphilic proteins that can be used for coatings on hydrophilic and hydrophobic surfaces. Through the formation of monolayers, they change the hydrophobicity of a given surface. Especially, the class I hydrophobins are interesting for biotechnology, because their layers are stable at high temperatures and can only be removed with strong solvents. These proteins self-assemble into monolayers under physiological conditions and undergo conformational changes that stabilize the layer structure. Several studies have demonstrated how the fusion of hydrophobins with short peptides allows the specific modification of the properties of a given surface or have increased the protein production levels through controlled localization of hydrophobin molecules inside the cell. Here, we fused the Aspergillus nidulans laccase LccC to the class I hydrophobins DewA and DewB and used the fusion proteins to functionalize surfaces with immobilized enzymes. In contrast to previous studies with enzymes fused to class II hydrophobins, the DewA-LccC fusion protein is secreted into the culture medium. The crude culture supernatant was directly used for coatings of glass and polystyrene without additional purification steps. The highest laccase surface activity was achieved after protein immobilization on modified hydrophilic polystyrene at pH 7. This study presents an easy-to-use alternative to classical enzyme immobilization techniques and can be applied not only for laccases but also for other biotechnologically relevant enzymes. IMPORTANCE: Although fusion with small peptides to modify hydrophobin properties has already been performed in several studies, fusion with an enzyme presents a more challenging task. Both protein partners need to remain in active form so that the hydrophobins can interact with one another and form layers, and so the enzyme (e.g., laccase) will remain active at the same time. Also, because of the amphiphilic nature of hydrophobins, their production and purification remain challenging so far and often include steps that would irreversibly disrupt most enzymes. In our study, we present the first functional fusion proteins of class I hydrophobins from A. nidulans with a laccase. The resulting fusion enzyme is directly secreted into the culture medium by the fungus and can be used for the functionalization of hard surfaces.

A family of AA9 lytic polysaccharide monooxygenases in Aspergillus nidulans is differentially regulated by multiple substrates and at least one is active on cellulose and xyloglucan.

Fungal genomes contain multiple genes encoding AA9 lytic polysaccharide monooxygenases (LPMOs), a recently discovered class of enzymes known to be active on cellulose and expressed when grown on biomass. Because of extensive genetic and biochemical data already available, Aspergillus nidulans offers an excellent model system to study the need for multiple AA9 LPMOs and their activity during oxidative degradation of biomass. We provide the first report on regulation of the entire family of AA9 LPMOs in A. nidulans over a range of polysaccharides including xylan, xyloglucan, pectin, glucan, and cellulose. We have successfully cloned and expressed AN3046, an AA9 LPMO in A. nidulans that is active on cellulose. Additionally, we performed mass spectral analyses that show the enzyme is active on the hemicellulose xyloglucan. The AN3046 LPMO showed synergy with other hydrolases in degrading sorghum stover. Our data showing activity of the overexpressed LPMO on cellulose and xyloglucan provides further evidence for the breadth of substrates acted on by AA9 LPMOs.

The old 3-oxoadipate pathway revisited: new insights in the catabolism of aromatics in the saprophytic fungus Aspergillus nidulans.

Aspergilli play major roles in the natural turnover of elements, especially through the decomposition of plant litter, but the end catabolism of lignin aromatic hydrocarbons remains largely unresolved. The 3-oxoadipate pathway of their degradation combines the catechol and the protocatechuate branches, each using a set of specific genes. However, annotation for most of these genes is lacking or attributed to poorly- or un-characterised families. Aspergillus nidulans can utilise as sole carbon/energy source either benzoate or salicylate (upstream aromatic metabolites of the protocatechuate and the catechol branches, respectively). Using this cultivation strategy and combined analyses of comparative proteomics, gene mining, gene expression and characterisation of particular gene-replacement mutants, we precisely assigned most of the steps of the 3-oxoadipate pathway to specific genes in this fungus. Our findings disclose the genetically encoded potential of saprophytic Ascomycota fungi to utilise this pathway and provide means to untie associated regulatory networks, which are vital to heightening their ecological significance.

Conserved and essential transcription factors for cellulase gene expression in ascomycete fungi.

Rational engineering of filamentous fungi for improved cellulase production is hampered by our incomplete knowledge of transcriptional regulatory networks. We therefore used the model filamentous fungus Neurospora crassa to search for uncharacterized transcription factors associated with cellulose deconstruction. A screen of a N. crassa transcription factor deletion collection identified two uncharacterized zinc binuclear cluster transcription factors (clr-1 and clr-2) that were required for growth and enzymatic activity on cellulose, but were not required for growth or hemicellulase activity on xylan. Transcriptional profiling with next-generation sequencing methods refined our understanding of the N. crassa transcriptional response to cellulose and demonstrated that clr-1 and clr-2 were required for the bulk of that response, including induction of all major cellulase and some major hemicellulase genes. Functional CLR-1 was necessary for expression of clr-2 and efficient cellobiose utilization. Phylogenetic analyses showed that CLR-1 and CLR-2 are conserved in the genomes of most filamentous ascomycete fungi capable of degrading cellulose. In Aspergillus nidulans, a strain carrying a deletion of the clr-2 homolog (clrB) failed to induce cellulase gene expression and lacked cellulolytic activity on Avicel. Further manipulation of this control system in industrial production strains may significantly improve yields of cellulases for cellulosic biofuel production.

Elucidating how the saprophytic fungus Aspergillus nidulans uses the plant polyester suberin as carbon source.

BACKGROUND: Lipid polymers in plant cell walls, such as cutin and suberin, build recalcitrant hydrophobic protective barriers. Their degradation is of foremost importance for both plant pathogenic and saprophytic fungi. Regardless of numerous reports on fungal degradation of emulsified fatty acids or cutin, and on fungi-plant interactions, the pathways involved in the degradation and utilisation of suberin remain largely overlooked. As a structural component of the plant cell wall, suberin isolation, in general, uses harsh depolymerisation methods that destroy its macromolecular structure. We recently overcame this limitation isolating suberin macromolecules in a near-native state. RESULTS: Suberin macromolecules were used here to analyse the pathways involved in suberin degradation and utilisation by Aspergillus nidulans. Whole-genome profiling data revealed the complex degrading enzymatic machinery used by this saprophytic fungus. Initial suberin modification involved ester hydrolysis and ω-hydroxy fatty acid oxidation that released long chain fatty acids. These fatty acids were processed through peroxisomal ß-oxidation, leading to up-regulation of genes encoding the major enzymes of these pathways (e.g. faaB and aoxA). The obtained transcriptome data was further complemented by secretome, microscopic and spectroscopic analyses. CONCLUSIONS: Data support that during fungal growth on suberin, cutinase 1 and some lipases (e.g. AN8046) acted as the major suberin degrading enzymes (regulated by FarA and possibly by some unknown regulatory elements). Suberin also induced the onset of sexual development and the boost of secondary metabolism.

Regulation of cellulolytic genes by McmA, the SRF-MADS box protein in Aspergillus nidulans.

Cellobiose triggers the production of two endoglucanases, EglA and EglB, in Aspergillus nidulans. The cellulose responsive element (CeRE) cis-element that is essential for induction has been identified on the eglA promoter, but transcription factors that bind to CeRE have not yet been identified. CeRE contained a consensus sequence CC(A/T)6GG for binding of the SRF-type MADS box proteins. Introduction of a missense mutation into mcmA, encoding for the sole SRF-MADS protein in A. nidulans, caused a significant reduction in cellulase induction. Real-time RT-PCR analysis revealed that inductive expression of not only eglA but also eglB and cbhA by cellobiose were under control of McmA. The McmA protein expressed in Escherichia coli specifically bound to two regions of the eglA promoter: CeRE and its upstream proximal region. These results, together with our previous study on the eglA promoter structure, imply that McmA regulates eglA expression by binding directly to its promoter. This is the first evidence for participation of an SRF-MADS protein in cellulase regulation.

A revised architecture of primary cell walls based on biomechanical changes induced by substrate-specific endoglucanases.

Xyloglucan is widely believed to function as a tether between cellulose microfibrils in the primary cell wall, limiting cell enlargement by restricting the ability of microfibrils to separate laterally. To test the biomechanical predictions of this "tethered network" model, we assessed the ability of cucumber (Cucumis sativus) hypocotyl walls to undergo creep (long-term, irreversible extension) in response to three family-12 endo-ß-1,4-glucanases that can specifically hydrolyze xyloglucan, cellulose, or both. Xyloglucan-specific endoglucanase (XEG from Aspergillus aculeatus) failed to induce cell wall creep, whereas an endoglucanase that hydrolyzes both xyloglucan and cellulose (Cel12A from Hypocrea jecorina) induced a high creep rate. A cellulose-specific endoglucanase (CEG from Aspergillus niger) did not cause cell wall creep, either by itself or in combination with XEG. Tests with additional enzymes, including a family-5 endoglucanase, confirmed the conclusion that to cause creep, endoglucanases must cut both xyloglucan and cellulose. Similar results were obtained with measurements of elastic and plastic compliance. Both XEG and Cel12A hydrolyzed xyloglucan in intact walls, but Cel12A could hydrolyze a minor xyloglucan compartment recalcitrant to XEG digestion. Xyloglucan involvement in these enzyme responses was confirmed by experiments with Arabidopsis (Arabidopsis thaliana) hypocotyls, where Cel12A induced creep in wild-type but not in xyloglucan-deficient (xxt1/xxt2) walls. Our results are incompatible with the common depiction of xyloglucan as a load-bearing tether spanning the 20- to 40-nm spacing between cellulose microfibrils, but they do implicate a minor xyloglucan component in wall mechanics. The structurally important xyloglucan may be located in limited regions of tight contact between microfibrils.

Improved polyhydroxybutyrate production by Saccharomyces cerevisiae through the use of the phosphoketolase pathway.

The metabolic pathways of the central carbon metabolism in Saccharomyces cerevisiae are well studied and consequently S. cerevisiae has been widely evaluated as a cell factory for many industrial biological products. In this study, we investigated the effect of engineering the supply of precursor, acetyl-CoA, and cofactor, NADPH, on the biosynthesis of the bacterial biopolymer polyhydroxybutyrate (PHB), in S. cerevisiae. Supply of acetyl-CoA was engineered by over-expression of genes from the ethanol degradation pathway or by heterologous expression of the phophoketolase pathway from Aspergillus nidulans. Both strategies improved the production of PHB. Integration of gapN encoding NADP(+) -dependent glyceraldehyde-3-phosphate dehydrogenase from Streptococcus mutans into the genome enabled an increased supply of NADPH resulting in a decrease in glycerol production and increased production of PHB. The strategy that resulted in the highest PHB production after 100 h was with a strain harboring the phosphoketolase pathway to supply acetyl-CoA without the need of increased NADPH production by gapN integration. The results from this study imply that during the exponential growth on glucose, the biosynthesis of PHB in S. cerevisiae is likely to be limited by the supply of NADPH whereas supply of acetyl-CoA as precursor plays a more important role in the improvement of PHB production during growth on ethanol.

Enhanced enzymatic cellulose degradation by cellobiohydrolases via product removal.

Product inhibition by cellobiose decreases the rate of enzymatic cellulose degradation. The optimal reaction conditions for two Emericella (Aspergillus) nidulans-derived cellobiohydrolases I and II produced in Pichia pastoris were identified as CBHI: 52 °C, pH 4.5-6.5, and CBHII: 46 °C, pH 4.8. The optimum in a mixture of the two was 50 °C, pH 4.9. An almost fourfold increase in enzymatic hydrolysis yield was achieved with intermittent product removal of cellobiose with membrane filtration (2 kDa cut-off): The conversion of cotton cellulose after 72 h was ~19 % by weight, whereas the conversion in the parallel batch reaction was only ~5 % by weight. Also, a synergistic effect, achieving ~27 % substrate conversion, was obtained by addition of endo-1,4-ß-D-glucanase. The synergistic effect was only obtained with product removal. By using pure, monoactive enzymes, the work illustrates the profound gains achievable by intermittent product removal during cellulose hydrolysis.

Asperemestrins A-D, Emestrin Hybrid Polymers with Bridged Skeletons from the Endophytic Fungus Aspergillus nidulans.

Four emestrin hybrid polymers, asperemestrins A-D (1-4, respectively), were isolated from the fungus Aspergillus nidulans. Asperemestrins A-C are the first examples of emestrin-sterigmatocystin heterodimers bearing a 7/5/6/6/5/5/6/6/6 nonacyclic system with a 2,5-diazabicyclo[2.2.2]octane-3,6-dione core, while asperemestrin D features an unprecedented 2,15-dithia-17,19-diazabicyclo[14.2.2]icosa-4,8-diene-12,18,20-trione core skeleton. Their structures were determined by extensive spectroscopic data, electronic circular dichroism calculations, and single-crystal X-ray diffraction. Asperemestrin B showed moderate cytotoxicity against cancer cell lines, including SU-DHL-2, HEPG2, and HL-60.

Deletion of AA9 Lytic Polysaccharide Monooxygenases Impacts A. nidulans Secretome and Growth on Lignocellulose.

Lytic polysaccharide monooxygenases (LPMOs) are oxidative enzymes found in viruses, archaea, and bacteria as well as eukaryotes, such as fungi, algae and insects, actively contributing to the degradation of different polysaccharides. In Aspergillus nidulans, LPMOs from family AA9 (AnLPMO9s), along with an AA3 cellobiose dehydrogenase (AnCDH1), are cosecreted upon growth on crystalline cellulose and lignocellulosic substrates, indicating their role in the degradation of plant cell wall components. Functional analysis revealed that three target LPMO9s (AnLPMO9C, AnLPMO9F and AnLPMO9G) correspond to cellulose-active enzymes with distinct regioselectivity and activity on cellulose with different proportions of crystalline and amorphous regions. AnLPMO9s deletion and overexpression studies corroborate functional data. The abundantly secreted AnLPMO9F is a major component of the extracellular cellulolytic system, while AnLPMO9G was less abundant and constantly secreted, and acts preferentially on crystalline regions of cellulose, uniquely displaying activity on highly crystalline algae cellulose. Single or double deletion of AnLPMO9s resulted in about 25% reduction in fungal growth on sugarcane straw but not on Avicel, demonstrating the contribution of LPMO9s for the saprophytic fungal lifestyle relies on the degradation of complex lignocellulosic substrates. Although the deletion of AnCDH1 slightly reduced the cellulolytic activity, it did not affect fungal growth indicating the existence of alternative electron donors to LPMOs. Additionally, double or triple knockouts of these enzymes had no accumulative deleterious effect on the cellulolytic activity nor on fungal growth, regardless of the deleted gene. Overexpression of AnLPMO9s in a cellulose-induced secretome background confirmed the importance and applicability of AnLPMO9G to improve lignocellulose saccharification. IMPORTANCE Fungal lytic polysaccharide monooxygenases (LPMOs) are copper-dependent enzymes that boost plant biomass degradation in combination with glycoside hydrolases. Secretion of LPMO9s arsenal by Aspergillus nidulans is influenced by the substrate and time of induction. These findings along with the biochemical characterization of novel fungal LPMO9s have implications on our understanding of their concerted action, allowing rational engineering of fungal strains for biotechnological applications such as plant biomass degradation. Additionally, the role of oxidative players in fungal growth on plant biomass was evaluated by deletion and overexpression experiments using a model fungal system.

Fed-batch production of Thermothelomyces thermophilus lignin peroxidase using a recombinant Aspergillus nidulans strain in stirred-tank bioreactor.

Enzymatic lignin depolymerization is considered a favorable approach to utilize lignin due to the higher selectivity and less energy requirement when compared to thermochemical lignin valorization. Lignin peroxidase (LiP) is one of the key enzymes involved in lignin degradation and possesses high redox potential to oxidize non-phenolic structures and phenolic compounds in lignin. However, the production of LiP is mainly from white-rot fungi at small scales. It is critical to discover new LiP from other microorganisms and produce LiP at large scales. This study aims to produce a novel LiP originally from Thermothelomyces thermophiles using a recombinant Aspergillus nidulans strain. The LiP production medium was optimized, and different fed-batch strategies for LiP production were investigated to improve LiP activity, yield, and productivity. Results demonstrated that LiP production was enhanced by using multi-pulse fed-batch fermentation. A maximum LiP activity of 1,645 mU/L with a protein concentration of 0.26 g/L was achieved.

Effect of bioaugmentation and nitrogen supplementation on composting of paddy straw.

A composting experiment was conducted to evaluate the effect of a hyperlignocellulolytic fungal consortium and different nitrogen amendments on paddy straw composting in terms of changes in physicochemical and biological parameters. A fungal consortium comprising four lignocellulolytic mesophilic fungal cultures was used as inoculum for bioaugmentation of paddy straw in perforated pits. The comparative effect of farmyard manure (FYM), soybean trash, poultry litter and urea on the composting process was evaluated at monthly intervals in terms of physicochemical (pH, EC, available P, C:N ratio and humus content) and biological (enzymatic and microbial activity) parameters. The compost prepared from bioaugmented paddy straw composting mixture, with poultry manure as nitrogen supplement attained desirable C:N ratio in 1 month and displayed least phytotoxicity levels along with higher production of beta-1,4-Exoglucanase. The combined activity of the autochthonous composting microbiota as well as the externally applied fungal inoculum accelerated the composting process of paddy straw. Supplementation of paddy straw with poultry manure in 8:1 ratio was identified as the best treatment to hasten the composting process. This study highlights the importance of application of fungal inoculum and an appropriate N-amendment such as poultry manure for preparation of compost using a substrate having high C:N ratio, such as paddy straw.