The inhibitory effect of ovomucoid from egg white on biofilm formation by Streptococcus mutans.

BACKGROUND: Streptococcus mutans, the main pathogen associated with tooth decay, forms cariogenic biofilms on tooth surfaces. Therefore, controlling oral biofilm helps prevent dental caries. Hen's egg is a nutrient-dense food, and egg white is a good source of protein. Ovomucoid is one of the major proteins in egg white, with a 28 kDa molecular weight. The present study aimed to investigate the inhibitory effects of ovomucoid on the biofilm formation of S. mutans by suppressing virulence factors, including bacterial adherence, cellular aggregation and exopolysaccharide (EPS) production. RESULTS: Crystal violet staining showed that biofilm formation by S. mutans was inhibited by ovomucoid at 0.25-1 mg mL-1 levels. Field emission scanning electron microscopy also confirmed this inhibition. In addition, ovomucoid reduced mature biofilm, water-insoluble EPS synthesis and the metabolic activity of bacterial cells in the biofilm. The bacterial adhesion and aggregation abilities of S. mutans were also decreased in the presence of ovomucoid. Ovomucoid downregulated the expression of comDE and vicR genes involved in the two-component signal transduction system and gtfA and ftf genes involved in EPS production. CONCLUSION: Ovomucoid has the potential for use as an anti-biofilm agent for dental caries treatment because of its inhibitory effects on the virulence factors of S. mutans. © 2023 Society of Chemical Industry.

UiO66-based molecularly imprinted polymers with water-compatible deep eutectic solvent as functional monomer for purification of lysozyme from egg white.

Protein-templated molecularly imprinted polymers have limitations such as poor mass transfer, slow recognition kinetics, and difficulties in isolation and purification due to their large molecular sizes, complex structures, and flexible conformations. To address these limitations and obtain lysozyme (Lyz)-imprinted polymers, a molecularly imprinted polymer (UiO66@DES-MIPs) was prepared for the first time by using Lyz as a template molecule, a metal-organic framework (UiO66-NH2) as a matrix, and a water-compatible deep eutectic solvent (DES) as a functional monomer. The introduction of UiO66-NH2 by the solvothermal method with a large specific surface area and favorable stability and resistance to environmental disturbances into the MIPs can reduce the "embedding" phenomenon and acquire a higher binding capacity and fast mass transfer. In addition, a water-soluble binary DES (1:2 molar ratio of choline chloride to 1,3 dimethylurea) prepared by a hydrothermal method as a functional monomer generates multiple forces with Lyz, increasing the hydrophilicity of UiO66@DES-MIPs and contributing to the formation and stabilization of the imprinted sites. Consequently, UiO66@DES-MIPs exhibited good selectivity, water compatibility, and fast adsorption equilibrium (the adsorption equilibrated at 243.87 ± 4.88 mg g-1 in 90 min). Besides, reusability experiments indicated that the UiO66@DES-MIPs could be recycled six times without obvious loss of adsorption capacity. The imprinting factor of UiO66@DES-MIPs is 3.67. The isolation and purification of Lyz from egg white confirmed the practicability of UiO66@DES-MIPs. The high adsorption capacity and specific recognition make this polymer a promising candidate for the isolation and purification of biological macromolecules.

A Novel Mechanically Robust and Biodegradable Egg White Hydrogel Membrane by Combined Unidirectional Nanopore Dehydration and Annealing.

A homogeneous egg white obtained by high-speed shearing and centrifugation was dehydrated into a fragile and water-soluble egg white glass (EWG) by unidirectional nanopore dehydration (UND). After EWG annealing, it can become an egg white hydrogel membrane (EWHM) that is water-insoluble, flexible, biocompatible, and mechanically robust. Its tensile strength, elongation at break, and the swelling ratio are about 5.84 MPa, 50-110%, and 60-130%, respectively. Protein structure analysis showed that UND caused the rearrangement of the protein molecules to form EWG with random coil and α-helix structures. The thermal decomposition temperature of the EWG was 309.25 °C. After EWG annealing at over 100 or 110 °C for 1.0 h or 45 min, the porous network EWHM was mainly composed of ß-sheet structures, and the thermal decomposition temperature increased to 317.25-318.43 °C. Their 12-day residues in five proteases ranged from 1% to 99%, and the order was pepsin > neutral protease > papain > trypsin > alkaline protease. Mouse fibroblast L929 cells can adhere, grow, and proliferate well on these EWHMs. Therefore, the combined technology of UND and annealing for green and novel processing of EWHM has potential applications in the field of biomimetic and biomedical materials.

Fabrication and characterization of Pickering emulsions stabilized by desalted duck egg white nanogels and sodium alginate.

BACKGROUND: The waste of salted egg white resources has always been a serious problem in the food industry. In this current study, we report on a kind of Pickering emulsion system, which was stabilized by duck egg white nanogels (DEWNs) and sodium alginate (SA), followed by which this system was crosslinked by calcium carbonate (CaCO3 ) via controlling the gluconolactone (GDL) concentrations, aiming to open up a promising route for making full use of these protein resources. RESULTS: The droplet size of the emulsion exhibited a reduction with an increase in SA concentrations, indicating that higher negative charges and steric hindrance was useful for a stable emulsion system. Meanwhile, the result of rheology measurement showed that storage modulus (G') values were higher than loss modulus (G″) values of the samples at higher GDL concentration, revealing the formation of elastic gel-like networks in the system, which was fabricated by SA and Ca2+ released by the CaCO3 particles. The gel-like network structure in the continuous phase improved both the freeze-thaw and thermal stability of the obtained Pickering emulsion system. Encouragingly, the Pickering high internal phase emulsions (HIPEs, φ = 0.75) stabilized by DEWN/SA3 -GDL3 were prepared, which could be stored at 4 °C for at least 30 days without oiling-off and creaming. CONCLUSION: These findings not only develop a green ultra-stable Pickering emulsion system but also extend the potential commercial applications of duck egg white proteins in the food, cosmetics, and pharmaceutical industries. © 2021 Society of Chemical Industry.

Online preconcentration of lysozyme in hen egg white using responsive polymer coating in CE.

A mixed polymer brushes material based on poly (2-methyl-2-oxazoline)- and poly (acrylic acid)-coated capillary with switchable protein adsorption/desorption properties was applied for online preconcentration of lysozyme in hen egg white during capillary electrophoresis performance. First, lysozyme in simulated egg white was successfully online preconcentrated and the detection signal of lysozyme was amplified. Ovalbumin, ovomucoid, and conalbumin in egg white were verified show negligible interference on the online preconcentration of lysozyme according to the study on electroosmotic flow mobility. Second, a series validation procedure was carried out to evaluate the proposed method performance. There was a good linearity behavior range from 0.1 to 5.0 ng/mL, limit of detection was 20 pg/mL, and limit of quantity was 50 pg/mL, the accuracy and robustness of this method were also excellent. Last, the proposed method has been successfully used to detect and analyze lysozyme in hen egg white, the determined amounts of lysozyme in hen egg white were consistent with reported normal levels and recoveries were in the range of 96.0-99.2%. After 75 consecutive runs, this prepared capillary was still stable for online preconcentration and determination of lysozyme in hen egg white without being affected by complex matrix.

Boronate affinity magnetic nanoparticles with hyperbranched polymer brushes for the adsorption of cis-diol biomolecules.

A boronate-modified magnetic affinity sorbent was prepared by adopting hyperbranched polyethyleneimine as the scaffold to amplify initiator sites. 3-Acrylamidophenylboronic acid was employed as monomer to proceed in situ free-radical polymerization on magnetite (Fe3O4) nanoparticles. Due to the improved density of boronic acid polymers, the adsorbent exhibited high adsorption capacity, typically (134 ± 8) µg mg-1 for dopamine, (92 ± 7) µg mg-1 for catechol, (363 ± 14) µg mg-1 for ovalbumin and (464 ± 22) µg mg-1 for horseradish peroxidase. These capacities are much higher than those of other adsorbents. The sorbent was applied to the enrichment of catecholamines from spiked human urine. Owing to the high adsorption capacity, only 1.0 mg of adsorbent was sufficient to eliminate the interferences and enrich the targets (dopamine, norepinephrine and epinephrine) within 5 min. They were quantified by HPLC. The recoveries from spiked samples range between 83.5% ~106%, with relative standard deviations of 3.2 ~ 9.4% (n = 5). The separation of glycoproteins from egg white was also accomplished prior to their analysis by PAGE. In the authors' perception, this approach is promising in that the density of functional groups on the adsorbent is strongly increased. Graphical abstract The preparation routine of boronate affinity magnetic adsorbent (Fe3O4@HpAAPBA). The adsorbent is used for the magnetic solid phase extraction of cis-dol compounds from real sample.

Facile synthesis of titanium(IV) ion-immobilized poly-glycidyl methacrylate microparticles functionalized with polyethylenimine and adenosine triphosphate for highly specific enrichment of intact phosphoproteins.

In this study, a facile synthesis of the titanium(IV) ion-immobilized poly-glycidyl methacrylate microparticles functionalized with polyethylenimine and adenosine triphosphate was developed for efficient enrichment of intact phosphoproteins. The titanium(IV) ion-immobilized microparticles had higher saturated adsorption capacity for phosphoproteins (1217.6 mg/g for ß-casein) than nonphosphoproteins (97.1 mg/g for bovine serum albumin) and the average particle diameter was about 1.4 µm with good dispersibility. In application, as demonstrated by SDS-PAGE, titanium(IV) ion-immobilized microparticles exhibited good performance in enriching intact phosphoproteins from standard protein mixtures of ß-casein and bovine serum albumin with high specificity and selectivity. In addition, titanium(IV) ion-immobilized microparticles were also successfully applied in intact phosphoprotein enrichment from complex biological samples including nonfat milk, chicken egg white, and mouse heart tissue extract.

Fabrication of an ionic-liquid-based polymer monolithic column and its application in the fractionation of proteins from complex biosamples.

An ionic-liquid-based polymer monolithic column was synthesized by free radical polymerization within the confines of a stainless-steel column (50 mm × 4.6 mm id). In the processes, ionic liquid and stearyl methacrylate were used as dual monomers, ethylene glycol dimethacrylate as the cross-linking agent, and polyethylene glycol 200 and isopropanol as co-porogens. Effects of the prepolymerization solution components on the properties of the resulting monoliths were studied in detail. Scanning electron microscopy, nitrogen adsorption-desorption measurements, and mercury intrusion porosimetry were used to investigate the morphology and pore size distribution of the prepared monoliths, which showed that the homemade ionic-liquid-based monolith column possessed a relatively uniform macropore structure with a total macropore specific surface area of 44.72 m2 /g. Compared to a non-ionic-liquid-based monolith prepared under the same conditions, the ionic-liquid-based monolith exhibited excellent selectivity and high performance for separating proteins from complex biosamples, such as egg white, snailase, bovine serum albumin digest solution, human plasma, etc., indicating promising applications in the fractionation and analysis of proteins from the complex biosamples in proteomics research.

Separation of proteins from complex bio-matrix samples using a double-functionalized polymer monolithic column.

A double-functionalized polymer monolithic column was fabricated within the confines of a stainless-steel column (50 mm × 4.6 mm i.d.) via a facile method using iron porphyrin, ionic liquid (1-allyl-3-methylimidazolium chloride) and 1,10-decanediol dimethacrylate as tri-monomers; ethylene dimethacrylate as a crosslinker; polyethylene glycol 400 and N,N-dimethylformamide as co-porogens; benzoyl peroxide and N,N-dimethyl aniline as the redox initiation system. Results obtained from scanning electron microscopy, nitrogen adsorption-desorption, and mercury intrusion porosimetry confirmed the uniform pore structure and the pore size distribution of macro-pores. The home-made monolith was further characterized by elemental analysis to investigate the elemental composition of Fe supplied by iron porphyrin, confirming the synthetic process. The resulting optimized monolithic column was used as the stationary phase in high performance liquid chromatography for separating proteins, such as mixture of standard proteins, egg white, and human plasma, exhibiting good selectivity and high performance. It is worth noting that the home-made double-functionalized polymer monolithic column shows excellent selectivity for fractionation separation of human plasma proteins, and it is a promising separation tool for complex bio-samples in proteomic research.

Dressings and topical agents for treating pressure ulcers.

BACKGROUND: Pressure ulcers, also known as bedsores, decubitus ulcers and pressure injuries, are localised areas of injury to the skin or the underlying tissue, or both. Dressings are widely used to treat pressure ulcers and promote healing, and there are many options to choose from including alginate, hydrocolloid and protease-modulating dressings. Topical agents have also been used as alternatives to dressings in order to promote healing.A clear and current overview of all the evidence is required to facilitate decision-making regarding the use of dressings or topical agents for the treatment of pressure ulcers. Such a review would ideally help people with pressure ulcers and health professionals assess the best treatment options. This review is a network meta-analysis (NMA) which assesses the probability of complete ulcer healing associated with alternative dressings and topical agents. OBJECTIVES: To assess the effects of dressings and topical agents for healing pressure ulcers in any care setting. We aimed to examine this evidence base as a whole, determining probabilities that each treatment is the best, with full assessment of uncertainty and evidence quality. SEARCH METHODS: In July 2016 we searched the Cochrane Wounds Specialised Register; the Cochrane Central Register of Controlled Trials (CENTRAL); Ovid MEDLINE; Ovid MEDLINE (In-Process & Other Non-Indexed Citations); Ovid Embase and EBSCO CINAHL Plus. We also searched clinical trials registries for ongoing and unpublished studies, and scanned reference lists of relevant included studies as well as reviews, meta-analyses, guidelines and health technology reports to identify additional studies. There were no restrictions with respect to language, date of publication or study setting. SELECTION CRITERIA: Published or unpublished randomised controlled trials (RCTs) comparing the effects of at least one of the following interventions with any other intervention in the treatment of pressure ulcers (Stage 2 or above): any dressing, or any topical agent applied directly to an open pressure ulcer and left in situ. We excluded from this review dressings attached to external devices such as negative pressure wound therapies, skin grafts, growth factor treatments, platelet gels and larval therapy. DATA COLLECTION AND ANALYSIS: Two review authors independently performed study selection, risk of bias assessment and data extraction. We conducted network meta-analysis using frequentist mega-regression methods for the efficacy outcome, probability of complete healing. We modelled the relative effectiveness of any two treatments as a function of each treatment relative to the reference treatment (saline gauze). We assumed that treatment effects were similar within dressings classes (e.g. hydrocolloid, foam). We present estimates of effect with their 95% confidence intervals for individual treatments compared with every other, and we report ranking probabilities for each intervention (probability of being the best, second best, etc treatment). We assessed the certainty (quality) of the body of evidence using GRADE for each network comparison and for the network as whole. MAIN RESULTS: We included 51 studies (2947 participants) in this review and carried out NMA in a network of linked interventions for the sole outcome of probability of complete healing. The network included 21 different interventions (13 dressings, 6 topical agents and 2 supplementary linking interventions) and was informed by 39 studies in 2127 participants, of whom 783 had completely healed wounds.We judged the network to be sparse: overall, there were relatively few participants, with few events, both for the number of interventions and the number of mixed treatment contrasts; most studies were small or very small. The consequence of this sparseness is high imprecision in the evidence, and this, coupled with the (mainly) high risk of bias in the studies informing the network, means that we judged the vast majority of the evidence to be of low or very low certainty. We have no confidence in the findings regarding the rank order of interventions in this review (very low-certainty evidence), but we report here a summary of results for some comparisons of interventions compared with saline gauze. We present here only the findings from evidence which we did not consider to be very low certainty, but these reported results should still be interpreted in the context of the very low certainty of the network as a whole.It is not clear whether regimens involving protease-modulating dressings increase the probability of pressure ulcer healing compared with saline gauze (risk ratio (RR) 1.65, 95% confidence interval (CI) 0.92 to 2.94) (moderate-certainty evidence: low risk of bias, downgraded for imprecision). This risk ratio of 1.65 corresponds to an absolute difference of 102 more people healed with protease modulating dressings per 1000 people treated than with saline gauze alone (95% CI 13 fewer to 302 more). It is unclear whether the following interventions increase the probability of healing compared with saline gauze (low-certainty evidence): collagenase ointment (RR 2.12, 95% CI 1.06 to 4.22); foam dressings (RR 1.52, 95% CI 1.03 to 2.26); basic wound contact dressings (RR 1.30, 95% CI 0.65 to 2.58) and polyvinylpyrrolidone plus zinc oxide (RR 1.31, 95% CI 0.37 to 4.62); the latter two interventions both had confidence intervals consistent with both a clinically important benefit and a clinically important harm, and the former two interventions each had high risk of bias as well as imprecision. AUTHORS' CONCLUSIONS: A network meta-analysis (NMA) of data from 39 studies (evaluating 21 dressings and topical agents for pressure ulcers) is sparse and the evidence is of low or very low certainty (due mainly to risk of bias and imprecision). Consequently we are unable to determine which dressings or topical agents are the most likely to heal pressure ulcers, and it is generally unclear whether the treatments examined are more effective than saline gauze.More research is needed to determine whether particular dressings or topical agents improve the probability of healing of pressure ulcers. The NMA is uninformative regarding which interventions might best be included in a large trial, and it may be that research is directed towards prevention, leaving clinicians to decide which treatment to use on the basis of wound symptoms, clinical experience, patient preference and cost.

Effect of temperature and seven storage media on human periodontal ligament fibroblast viability.

BACKGROUND/AIM: Natural resources, such as coconut water, propolis, and egg whites, have been examined as possible storage media for avulsed teeth. However, there is a lack of research focused on the efficacy of these three products together compared with Hank's balanced salt solution and milk. The aim of this study was to evaluate the capacity of seven storage media to maintain the viability of human periodontal ligament fibroblasts (PDLFs). MATERIAL AND METHODS: PDLFs were kept at 5°C and 20°C, in skimmed milk (SMilk), whole milk (WMilk), recently prepared Hank's balanced salt solution (HBSS), Save-A-Tooth® system's HBSS (Save), natural coconut water (Coconut), Propolis, and egg white (Egg) for 3, 6, 24, 48, 72, 96, and 120 h, through the analysis of tetrazolium salt-based colorimetric (MTT) assay. RESULTS: At 5°C, SMilk and WMilk were better than HBSS in maintaining cell viability, from 24 h onward. At 20°C, HBSS was the best storage medium at 96 and 120 h. At both temperatures, from 6 h onward, Coconut, Propolis and Egg were less effective than SMilk, WMilk, and HBSS. In general, the performance of Coconut, Propolis and Egg were not influenced by storage temperature. However, the lowest temperature undermined the effectiveness of HBSS from 24 h and favored SMilk and WMilk, from 96 and 48 h onward, respectively. Save and water were the worst storage media. CONCLUSION: SMilk was the best storage medium, followed by WMilk and HBSS. Coconut, Propolis, and Egg can be indicated for the conservation of PDLF up to 3 h. The lower temperature (5°C) undermined the effectiveness of HBSS and favored SMilk and WMilk.

Effects of tooth storage media on periodontal ligament preservation.

BACKGROUND/AIMS: An easily available tooth storage medium is required to preserve a tooth after avulsion. Milk and Hank's balanced salt solution (HBSS) are recommended as tooth storage media, and egg white is also reported to be comparable with milk. The aim of this study was to histologically and immunohistochemically evaluate the effect of different tooth storage media on the periodontal ligament (PDL) of extracted teeth. MATERIALS AND METHODS: This experiment used HBSS, milk, and egg white as tooth storage media. A total of ninety-six 6-week-old male Sprague-Dawley rats were used in these experiments. In each experiment, six rats were used for each medium and for the control group. Extracted rat molar teeth were immersed in these three different storage media for 1 hour. In each medium, six samples (n=18) were fixed immediately, and the remaining samples (n=54) were subcutaneously transplanted. In the control group (n=24), the extracted teeth were fixed or transplanted immediately after extraction. At day 4, 1 and 2 weeks after transplantation, the teeth were examined by radiographic, histological, and immunohistochemical methods. The number of PDL cells in the storage media was also counted. RESULTS: Teeth immersed for 1 hour in milk showed the thinnest PDL. Immunohistochemistry of periostin and CD68 labeling suggested degradation of the extracellular matrix in the PDL. In the media used for immersion, more PDL cells were observed in milk than in the other solutions. After transplantation, the HBSS and egg white groups maintained adequate thickness of PDL but in the milk group, thinner PDL and ankylosis were observed. CONCLUSION: Adequate thickness of PDL was maintained in the egg white group, whereas the milk group showed disturbance in the PDL, which may lead to ankylosis.

Effects of macromolecular crowding on a small lipid binding protein probed at the single-amino acid level.

Macromolecular crowding is a distinctive feature of the cellular interior, influencing the behaviour of biomacromolecules. Despite significant advancements in the description of the effects of crowding on global protein properties, the influence of cellular components on local protein attributes has received limited attention. Here, we describe a residue-level systematic interrogation of the structural, dynamic, and binding properties of the liver fatty acid binding protein (LFABP) in crowded solutions. Two-dimensional NMR spectral fingerprints and relaxation data were collected on LFABP in the presence of polymeric and biomolecular crowders. Non-interacting crowders produced minimal site-specific spectral perturbations on ligand-free and lipid-bound LFABP. Conformational adaptations upon ligand binding reproduced those observed in dilute solution, but a perturbation of the free oleate state resulted in less favorable uptake. When LFABP engaged in direct interactions with background molecules, changes in local chemical environments were detected for residues of the internal binding pocket and of the external surface. Enhanced complexity was introduced by investigating LFABP in cell lysates, and in membrane-bounded compartments. LFABP was able to capture ligands from prokaryotic and eukaryotic cell lysates, and from artificial cells (water-in-oil emulsion droplets). The data suggest that promiscuous interactions are a major factor influencing protein function in the cell.

Preparation of magnetic glycoprotein-imprinted nanoparticles with dendritic polyethyleneimine as a monomer for the specific recognition of ovalbumin from egg white.

Glycoproteins are crucial in massive physiological events and clinical application. It is necessary to prepare new materials to isolate the specific glycoprotein. New and simple core-shell molecularly imprinted polymers were prepared by surface imprinting. The polymers are synthesized with magnetic nanoparticles as the core, water-soluble dendritic polyethyleneimine as the monomer and the ovalbumin as the template. The prepared imprinted polymers showed thin imprinted shell, biocompatibility and superparamagnetic properties. The resultant materials exhibited fast kinetics, high adsorption capacity, perfect selectivity and reusability. More important, they can absorb the template glycoprotein from the neutral solution and successfully be applied to recognize the ovalbumin from egg white, which means that they can provide an alternate method to isolate glycoprotein from bodily fluids.

Egg White Templated Synthesis of Ag and Au@Ag Alloy Microspheres for Surface-Enhanced Raman Spectroscopy Research.

Herein, we report the green synthesis of Ag and Au@Ag microspheres by using the aqueous extracts of the egg white as well as their application as substrates for surface-enhanced Raman spectroscopy (SERS) detection. Both microspheres are prepared via the green synthesis method (room temperature, in aqueous solution and a benign reducer). The as-prepared urchin-like Ag microspheres have an average diameter of 600-800 nm, which is made up of some nanopricks with an average length of 10-40 nm. Meanwhile, the Au@Ag architectures prepared by galvanic replacement keep nearly similar size, which is also composed of some compact nanoparticles with an average diameter of about 10-40 nm. These products are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electronic microscopy (TEM), and Fourier transform infrared spectrophotometer (FTIR). The study on SERS activities is also carried out for both microspheres. It is found that Au@Ag microspheres possess much higher SERS activity than Ag microspheres. Our work may shed light on the design and synthesis of self-assembled 3D micro/nano-architectures for the use of SERS, catalysis, biosensors, nanomedicine, etc.

Carbon nanotubes play an important role in the spatial arrangement of calcium deposits in hydrogels for bone regeneration.

Age related bone diseases such as osteoporosis are considered among the main causes of reduced bone mechanical stability and bone fractures. In order to restore both biological and mechanical function of diseased/fractured bones, novel bioactive scaffolds that mimic the bone structure are constantly under development in tissue engineering applications. Among the possible candidates, chitosan-based thermosensitive hydrogel scaffolds represent ideal systems due to their biocompatibility, biodegradability, enhanced antibacterial properties, promotion of osteoblast formation and ease of injection, which makes them suitable for less invasive surgical procedures. As a main drawback, these chitosan systems present poor mechanical performance that could not support load-bearing applications. In order to produce more mechanically-competent biomaterials, the combined addition of hydroxyapatite and carbon nanotubes (CNTs) is proposed in this study. Specifically, the aim of this work is to develop thermosensitive chitosan hydrogels containing stabilised single-walled and multi-walled CNTs, where their effect on the mechanical/physiochemical properties, calcium deposition patterns and ability to provide a platform for the controlled release of protein drugs was investigated. It was found that the addition of CNTs had a significant effect on the sol-gel transition time and significantly increased the resistance to compression for the hydrogels. Moreover, in vitro calcification studies revealed that CNTs played a major role in the spatial arrangements of newly formed calcium deposits in the composite materials studied, suggesting that they may have a role in the way the repair of fragile and/or fractured bones occurs in vivo.

Preparation of poly(vinylphenylboronic acid) chain grafted poly(glycidylmethacrylate-co-ethylenedimethacrylate) beads for the selective enrichment of glycoprotein.

Surface-initiated atom transfer radical polymerization was successfully used to prepare 4-vinylphenylboronic acid functionalized poly(glycidylmethacrylate-co-ethylenedimethacrylate) beads for the selective enrichment of glycoprotein from complex biological samples in this study. The modified bead surfaces were characterized using Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The sorption behaviors, including adsorption isotherms, incubation time, and pH effect, were investigated. The results demonstrated that the boronated beads have a high affinity for glycoprotein, which is due to the well-defined boronic acid brushes on the beads surfaces. Furthermore, the polyvinylphenylboronic acid grafted poly(glycidylmethacrylate-co-ethylenedimethacrylate) beads were used to efficiently enrich and purify glycoprotein from real egg white samples and α-fetoprotein from human serum samples. The mass spectrometry results demonstrated that the polyvinylphenylboronic acid grafted poly(glycidylmethacrylate-co-ethylenedimethacrylate) beads are a suitable material for the enrichment of glycosylated protein from complex biological samples.

Artificial biomelanin: highly light-absorbing nano-sized eumelanin by biomimetic synthesis in chicken egg white.

The spontaneous oxidative polymerization of 0.01-1% w/w 5,6-dihydroxyindole (DHI) in chicken egg white (CEW) in the absence of added solvents leads to a black, water-soluble, and processable artificial biomelanin (ABM) with robust and 1 order of magnitude stronger broadband light absorption compared to natural and synthetic eumelanin suspensions. Small angle neutron scattering (SANS) and transmission electron microscopy (TEM) analysis indicated the presence in the ABM matrix of isolated eumelanin nanoparticles (≤100 nm) differing in shape from pure DHI melanin nanoparticles (SANS evidence). Electron paramagnetic resonance (EPR) spectra showed a slightly asymmetric signal (g ∼ 2.0035) similar to that of solid DHI melanin but with a smaller amplitude (ΔB), suggesting hindered spin delocalization in biomatrix. Enhanced light absorption, altered nanoparticle morphology and decreased free radical delocalization in ABM would reflect CEW-induced inhibition of eumelanin aggregation during polymerization accompanied in part by covalent binding of growing polymer to the proteins (SDS-PAGE evidence). The technological potential of eumelanin nanosizing by biomimetic synthesis within a CEW biomatrix is demonstrated by the preparation of an ABM-based black flexible film with characteristics comparable to those of commercially available polymers typically used in electronics and biomedical applications.

Facile preparation of organic-inorganic hybrid polymeric ionic liquid monolithic column with a one-pot process for protein separation in capillary electrochromatography.

An organic-inorganic hybrid monolithic column based on 1-vinyl-3-dodecylimidazolium bromide (VC12Im(+)Br(-)) has been prepared in a single step by combining radical copolymerization with a non-hydrolytic sol-gel (NHSG) process. The NHSG process was significantly shortened to 6 h by using formic acid as catalyst. For comparison, we also prepared polymeric ionic liquid (PIL) monolithic columns by hydrolytic sol-gel and organic polymeric process, respectively. The resulting monolithic columns were characterized by Fourier transform infrared spectra, scanning electron microscopy, and Brunauer-Emmett-Teller. Under the capillary electrochromatography mode, these columns were applied to separate alkylbenzenes, anilines, and proteins, respectively. The results indicated that the NHSG-based hybrid PIL monolithic column exhibited the highest column efficiency among the three types of columns; organic solvent, commonly required by the traditional columns to achieve satisfactory separation efficiency for proteins, was absent in the NHSG-based hybrid PIL monolithic column because of the biocompatibility of the VC12Im(+)Br(-), which was beneficial to analysis of protein containing samples. In order to demonstrate its application potential, the developed NHSG-based hybrid PIL monolithic column was also employed to separate egg white sample.

Preparation of lysozyme molecularly imprinted polymers and purification of lysozyme from egg white.

Molecular imprinting as a promising and facile separation technique has received much attention because of its high selectivity for target molecules. In this study, lysozyme molecularly imprinted polymers (Lys-MIPs) were successfully prepared by the entrapment method with lysozyme as the template molecule, acrylamide as the functional monomer and N,N-methylenebisacrylamide as the cross-linker. The removal of the template lysozyme from the molecularly imprinted polymers was investigated in detail by two methods. The synthesized Lys-MIPs were characterized by scanning electron microscopy and Fourier transform-infrared, and the adsorption capacity, selectivity and reproducibility of the Lys-MIPs were also evaluated. The maximum adsorption capacity reached 94.8 mg/g, which is twice that of nonmolecularly imprinted polymers, and satisfactory selectivity and reproducibility were achieved. Using the Lys-MIP column, lysozyme could be separated completely from egg white, with purity close to 100% and mass recovery of 98.2%. This illustrated that the synthesized Lys-MIPs had high specific recognition and selectivity to the template lysozyme when they were applied to a mixture of protein standards and a real sample.