Antifungal and antiocratoxigenic potential of Alpinia speciosa and Cymbopogon flexuosus essential oils encapsulated in poly(lactic acid) nanofibres against Aspergillus fungi.

Essential oils encapsulated in a polymeric matrix can be used as an alternative method to control fungi and mycotoxins. The essential oils were extracted by hydrodistillation and characterized by gas chromatography. The nanofibres were produced from poly (acid lactic) (PLA) containing essential oils by the Solution Blow Spinning method. The antifungal and antimicotoxygenic properties were evaluated against Aspergillus ochraceus and Aspergillus westerdijkiae by the fumigation method. Terpinen-4-ol (20·23%), sabinene (20·18%), 1·8-cineole (16·69%) and γ-terpinene (11·03%) were the principal compounds present in the essential oil from Alpinia speciosa, whereas citral (97·67%) was dominant from Cymbopogon flexuosus. Microscopy images showed that the addition of essential oils caused an increase in the diameter of the nanofibres. The infrared spectroscopy results indicated the presence of essential oils in the PLA nanofibres. Differential scanning calorimetry curves also indicated the existence of interactions between the essential oils and polymeric macromolecules through their plasticizing action. The hydrophobic character of nanofibres was revealed by the contact angle technique. An antifungal effect was observed, the mycelial growths (3·25-100%) and the synthesis of ochratoxin A (25·94-100%) were inhibited by the presence of the nanofibres. The results suggest that bioactive nanofibres hold promise for application to control toxigenic fungi.

Antimicrobial activity of conventional and plant-extract disinfectant solutions on microbial biofilms on a maxillofacial polymer surface.

STATEMENT OF PROBLEM: Dentists often note problems with infection in patients with maxillofacial prostheses. Conventional disinfection protocols are not always effective and may alter the properties of the polymer used in the prosthesis. Thus, the search for improved disinfection methods is important. PURPOSE: The purpose of this in vitro study was to evaluate and compare the antimicrobial activity of conventional disinfectant solutions (water and neutral soap and 4% chlorhexidine) and plant extracts (Cymbopogon nardus and Hydrastis canadensis) on specimens of maxillofacial silicone contaminated with Candida albicans and Staphylococcus aureus biofilms. MATERIAL AND METHODS: Seventy-two silicone (MDX4-4210) specimens were fabricated (5×2 mm) and sterilized. Thirty-six were contaminated with C albicans (10(6) cells/mL) and 36 with S aureus (10(8) cells/mL) to evaluate the antimicrobial activity of the cleaning protocols. After incubation (37°C/72 hours), the specimens were divided into 5 groups: not disinfected (positive control), soaking in saline solution for 10 minutes, soaking in 4% chlorhexidine for 10 minutes, soaking in C nardus for 10 minutes, soaking in H canadensis for 10 minutes, and washing by hand with water and neutral soap for 30 seconds. The viability of cells was evaluated by XTT (2,3-bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H-tetrazolium-5-carboxanilide) assay and by scanning electron microscope analysis. The results were analyzed by ANOVA and the Tukey HSD test (α=.05). RESULTS: All disinfection solutions provided a statistically significant reduction in biofilm viability compared with the control group for both microorganisms (P<.05). Washing with water and neutral soap was significantly more effective in reducing biofilm viability than immersion in the disinfection solutions, with persistence of viable microorganisms between 1.05% for C albicans and 0.62% for S aureus after this cleaning protocol. Photomicrographs revealed that 4% chlorhexidine altered the surface of the polymer. CONCLUSIONS: Within the limitations of this in vitro study, it was concluded that the cleaning protocols with different disinfectant solutions produced a significant reduction in the viability of C albicans and S aureus biofilms on the silicone polymer. Washing with water and neutral soap was the most effective protocol against both microorganisms.

Antimicrobial Lemongrass Essential Oil-Copper Ferrite Cellulose Acetate Nanocapsules.

Cellulose acetate (CA) nanoparticles were combined with two antimicrobial agents, namely lemongrass (LG) essential oil and Cu-ferrite nanoparticles. The preparation method of CA nanocapsules (NCs), with the two antimicrobial agents, was based on the nanoprecipitation method using the solvent/anti-solvent technique. Several physical and chemical analyses were performed to characterize the resulting NCs and to study their formation mechanism. The size of the combined antimicrobial NCs was found to be ca. 220 nm. The presence of Cu-ferrites enhanced the attachment of LG essential oil into the CA matrix. The magnetic properties of the combined construct were weak, due to the shielding of Cu-ferrites from the polymeric matrix, making them available for drug delivery applications where spontaneous magnetization effects should be avoided. The antimicrobial properties of the NCs were significantly enhanced with respect to CA/LG only. This work opens novel routes for the development of organic/inorganic nanoparticles with exceptional antimicrobial activities.

Inhibition of adherence of C. albicans to dental implants and cover screws by Cymbopogon nardus essential oil and citronellal.

OBJECTIVE: This study investigated the biological activity of the essential oil from Cymbopogon nardus and of the phytoconstituent citronellal on Candida strains as to the inhibition of adherence to dental implants and cover screws. MATERIAL AND METHODS: The essential oil was analyzed by gas chromatography coupled to mass spectrometry (GC-MS) and had its MIC and MFC determined against 12 strains of Candida. Then, tests of inhibition of adherence to the dental implants and cover screws were carried out using the MIC of the substances, followed by scanning electron microscopy analysis. Nystatin and chlorhexidine were used as positive controls, and experiments were performed in triplicate. RESULTS: The analysis by GC-MS of the essential oil identified citronellal as the major compound. The MICs of the essential oil, citronellal, chlorhexidine, and nystatin--able to inhibit 100 % of the strains--were found to be 64, 512, 64, and 32 µg/ml, respectively. The essential oil significantly inhibited the adherence of Candida albicans to the dental implants and cover screws (p < 0.001). Citronellal inhibited yeast adherence only to the dental implants (p < 0.001), and no significant results were found for the cover screws (p > 0.05) compared to the growth control. CONCLUSION: The essential oil and citronellal have proven antifungal activity and are able to inhibit the in vitro adherence of C. albicans. CLINICAL RELEVANCE: There has been a search for alternative natural product-containing formulations that should be effective in inhibiting adherence of yeasts to the surfaces of materials and also able to treat oral fungal infections. Further trials could make these products an alternative to chemical removal of peri-implant biofilm.

Comprehensive characterization of microcrystalline cellulose from lemon grass (Cymbopogan citratus) oil extraction agro-industrial waste for cementitious composites applications.

Presently, the construction industry demands components that are exceptionally strong and long-lasting. The initial important construction material is concrete, which contains between 1 % and 2 % of air voids. The structural damage caused by water that enters through the air spaces are improved with filler material. Chemical filler materials are environmentally harmful; therefore, eco-friendly materials are selected for this study. The environmentally benign character of agro-waste byproduct usage is a driving factor in the field of research. Numerous uses can be found for waste materials, especially after they have been repurposed. We used a byproduct of an essential oil extraction company, an extract made from the leaves of lemon grass (Cymbopogan citrus), in our research. Alkalization, slow pyrolysis, acid hydrolysis, and bleaching are only some of the chemical treatments that could be used to easily extract microcrystalline cellulose from the discarded waste material. In our study the chemicals used are mild harmful to the environment and a surface reactant (linear alkyl benzene sulfonic acid) is utilised to bleach and purify the microcrystalline cellulose. Thermal analysis, scanning electron microscopy, transmission electron microscopy and Fourier transform spectroscopy were all used to learn more about the cellulose that had been extracted. The extracted cellulose powder comprises a high crystallinity index (68.14 %) and low crystallite size (5.13 nm) found using X-ray diffraction analysis. The smooth and porous surface is observable in scanning electron microscope analysis. The Differential scanning calorimeter curve shows the highest degradation temperature at 218.16 °C. The micro sized particles mostly range between 100 and 120 µm and are found using ImageJ. The surface roughness and permissible skewness of cellulose particles were examined using atomic force microscopy. The density of extracted cellulose is 1.092 g/cm3. The microcrystalline cellulose yield % was notably maximum (40.45 %). This cellulose was introduced in a M30 grade cement concrete as fillers up to 5 % by the weight of cement. The fresh and mechanical properties of the concrete was found to get improved with the addition of cellulose up to 3 %. As a result, the characteristics of cellulose boost its utility within the construction sector.

Preparation and application of hydroxypropyl methylcellulose blended with beeswax and essential oil edible coating to enhance the shelf life of sweet cherries.

The study involved preparing and applying edible nano-emulsion coatings containing hydroxypropyl methylcellulose (HPMC), beeswax (BW), and essential oils (thyme, cinnamon, clove, and peppermint) onto sweet cherries. The application was conducted at 4 °C, and the coated cherries were stored for 36 days. This research examines synthesized nano-emulsions physicochemical properties and antibacterial and antifungal activities (C1, C2, and C3). Additionally, it evaluates the quality parameters of control and coated sweet cherry samples. The features of the three edible coatings were assessed, and the findings from the zeta sizer, zeta potential, FTIR, and SEM analyses were deemed satisfactory. It was observed that the application of nano-emulsion coating C1 yielded positive results in maintaining quality attributes such as total suspended solids (TSS), total solids (TS), color, weight loss, respiration rate, firmness, total phenolic contents, and sensory evaluations. Nano-emulsion coating C1 demonstrated efficacy as an antibacterial and antifungal agent against foodborne pathogens E. coli and A. niger, respectively. The current research results are promising and applicable in food industries. The implications suggest that composite nano-emulsion, specifically nano-emulsion edible coatings, can be extensively and effectively used to preserve the quality and shelf life of fruits and vegetables. Furthermore, the environmental waste from conventional food packaging will be minimized using edible packaging applications.

Determination of required hydrophilic-lipophilic balance of citronella oil and development of stable cream formulation.

CONTEXT: Citronella oil is reported to have excellent mosquito-repellent activity. To develop a stable cream formulation (emulsion), its hydrophilic-lipophilic balance (HLB) value is important. OBJECTIVE: To determine required hydrophilic-lipophilic balance (rHLB) value of citronella oil and to develop stable cream formulation. MATERIALS AND METHODS: Emulsions of citronella oil were prepared by phase inversion temperature technique using water, Tween 80 and Span 80. A first series of 11 emulsions with HLB values ranging from 5.0 to 15.0 and a second series of eight emulsions with smaller interval in HLB values from 11.0 to 13.8 were prepared. Emulsions were evaluated for creaming index, droplet size and turbidity to determine rHLB. Utilizing determined rHLB, citronella oil cream was formulated and evaluated for different texture parameters. rHLB of light liquid paraffin was also determined for validation of methodology. RESULTS: rHLB of light liquid paraffin and citronella oil was determined to be 11.80 and 12.60, respectively. Stable citronella oil cream was developed with 10% emulsifier blend. Texture parameters were found to be consistent over the entire storage period. DISCUSSION: Creaming index, droplet diameter, percent increase in droplet diameter and turbidity are the established parameters to determine rHLB and to develop stable emulsion. Emulsions with optimum emulsifier concentration resulted in less percentage creaming index, smallest droplet, less percentage increase in droplet diameter and highest turbidity. Texture properties evaluation ensures the stability of the developed cream. CONCLUSION: rHLB value of citronella oil was found 12.6 and a stable cream was formulated utilizing determined rHLB.

Cymbopogon citratus essential oil: an active principle of nanoemulsion against Enterococcus faecalis root canal biofilm.

Aim: The objective was to formulate and characterize the nanoemulsion based on Cymbopogon citratus oil, intended for use in infected teeth root canal therapy. The investigation of the antioxidant and antibiofilm potential toward Enterococcus faecalis was aimed as well. Materials & methods: Characterization of oil (by GC/MS analysis) and nanoemulsion (by dynamic light scattering instrument), and determination of antibacterial (by microdilution assay), antibiofilm (by crystal violet assay) and antioxidant properties (by 2,2-diphenyl-1-picryl-hydrazyl-hydrate and thiobarbituric acid assay methods) were provided. Antibiofilm efficacy of irrigation procedure including nanoemulsion was screened on extracted teeth (by CFU-counting assay). Results: Notable antibacterial and antibiofilm activity, both against forming and preformed biofilms of oil, was observed. Irrigation involved nanoemulsion showed remarkable antibiofilm potential. Both substances induced some antioxidant activity. Conclusion: Results encourage further research with the aim of application of the nanoemulsion in dental practice.

Novel cellulose-based biosorbent from lemongrass leaf combined with cellulose acetate for adsorption of crystal violet.

A novel biosorbent from lemongrass leaf fibers incorporated with cellulose acetate (TLGL-CA) was prepared and its properties and adsorption capacity toward crystal violet (CV) were investigated. The good adhesion between TLGL and CA in TLGL-CA sheet was revealed by scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier Transform Infrared Spectroscopy (FTIR), and tensile properties. The potential of the biosorbent for CV adsorption was indicated by its high swelling capacity and the presence of functional groups of lignocellulose. Adsorption results obtained at different contact times and initial CV concentrations fitted well with the pseudo-second order model. The adsorption data at equilibrium were well described by the Langmuir isotherm model and the maximum monolayer adsorption capacity was 36.10 mg g-1 at 25 °C. In the desorption study, five adsorption-desorption cycles of CV were successfully repeated with TLGL-CA sheet, using acetic acid as the desorbing agent. Based on the study results, it was concluded that the developed biosorbent is effective, inexpensive, and convenient to use for the removal of cationic dye in wastewater.

Poly(lactic acid) nanocapsules containing lemongrass essential oil for postharvest decay control: In vitro and in vivo evaluation against phytopathogenic fungi.

The increased demand for pesticide-free foods has also increased the search for healthier and environmentally friendly alternatives in agriculture. Essential oils are known to possess natural antifungal properties, becoming a reliable alternative for commercial fungicides, especially for postharvest decay control. However, essential oils are volatile and photodegradable, which reduces their long-term activities. This work presents the development of a lemongrass essential oil-containing poly(lactic acid) nanocapsules. They have shown in vitro antifungal activity against Colletotrichum acutatum and Colletotrichum gloeosporioides with a MIC dosage of 0.1% (v/v) for both phytopathogens. In the in vivo assay with postharvest apples, the ones treated with encapsulated essential oil showed bitter rot lesions three times smaller than the ones treated with non-encapsulated essential oil, or in comparison to the apples in positive control. The methodology led to stable nanocapsules with spherical morphology, a mean diameter of 96.4 nm, and with an encapsulation efficiency of 99%.

Ecofriendly Approach for the Control of a Common Insect Pest in the Food Industry, Combining Polymeric Nanoparticles and Post-application Temperatures.

One of the most common insect pests is Plodia interpunctella (Hübner) (Lepidoptera: Pyralidae), which affects different food commodities. A new effective approach for the management of insect pests is the development of new formulations based on essential oils (EO). However, few works informed about the relationship between insecticidal activity of EO or essential oils loaded polymeric nanoparticles (EOPN) and post-application temperature. In our work, palmarosa [Cymbopogon martinii (Roxb.) Watson], geranium (Geranium maculatum L.), and peppermint (Mentha piperita L.) oils were formulated in a polyethylene glycol 6000 matrix to obtain EOPN. Geranium and palmarosa EOPN had sizes of 259 and 191 nm, respectively; the encapsulation efficiency (EE) was close to 90%, and the samples were monodisperse. The sizes from peppermint EOPN were around 380 nm, with an EE of 72%, and were polidisperse. In a contact toxicity bioassay, the insecticidal effect of the oils was increased by all EOPN, with palmarosa oil being the most toxic. In addition, the oils and their nanoparticles showed a significantly negative temperature coefficient when applied by contact. In a fumigant bioassay, just palmarosa and peppermint EOPN enhanced the oil activity and palmarosa EO and EOPN showed the highest toxic effect. In this case, the EO and EOPN insecticidal activity was unaffected by environmental temperature variation.

Antimicrobial potential of irrigants based on essential oils of Cymbopogon martinii and Thymus zygis towards in vitro multispecies biofilm cultured in ex vivo root canals.

OBJECTIVE: The objective was to determine the antibiofilm efficacy of Cymbopogon martinii and Thymus zygis essential oils and to estimate the disruption potential of oil-based endodontic irrigants on the multispecies biofilm formed in the root canals of extracted teeth. DESIGN: The essential oils were characterized (GC-MS), while their antibacterial and cytotoxic properties were detected by microdilution and MTT assays. Particles sizes and polydispersity indices were determined for the irrigants. The isolates from root canals of pediatric patients were identified (MALDI-TOF). The multispecies biofilms were formed from Streptococcus mitis, Streptococcus sanguinis and Enterococcus faecalis. Antibiofilm properties of the essential oils and irrigants were determined by crystal violet and plate counting assay. Statistical analysis was performed by one-way ANOVA. RESULTS: The screening of biofilm biomass revealed a disruption potential of C. martinii essential oil. The plate counting assay showed the efficacy of both oils in diminishing cell viability: high in biofilms (reduction of log10CFU was 2.75-2.87) and moderate in the planktons formed above. The essential oil-based irrigants showed the same antibiofilm activity as in the control (1.5 % sodium hypochlorite) for C. martini and almost 2-fold higher for T. zygis. Successive irrigations with 1.5 % sodium hypochlorite, saline and an oil-based irrigant was more efficient for C. martini than for the control (reductions of log10CFU was 1.69 and 1.14, respectively). CONCLUSIONS: Notable activities achieved by essential oils and oil-based irrigants, particularly regarding C. martini, against the biofilm consisting of S. mitis, S. sanguinis, and E. faecalis, are expected to encourage further research in endodontics.

Cytotoxicity and antimicrobial effects of citronella oil (Cymbopogon nardus) and commercial mouthwashes on S. aureus and C. albicans biofilms in prosthetic materials.

Although the effectiveness of some mouthwashes has been proven, phytotherapy is still a field to be explored as an alternative to commercial products. OBJECTIVE: To evaluate, in vitro, the cytotoxicity and efficacy of two solutions based on citronella oil (CN), on S. aureus and C. albicans biofilms (in formation-adhesion phase and 24 h-biofilm formation) on acrylic resin and nickel-chromium alloy samples (one trademark of each material), compared to two alcohol-free commercial mouthwashes. MATERIAL AND METHODS: Two solutions containing CN at concentrations of 5x and 10x the minimum bactericidal/fungicidal concentration (MBC/MFC) were prepared by microdilution. After contamination of the samples surfaces with these microorganisms, the mouthwashes (CN - 5x and 10x; CHX - 0,12% alcohol-free chlorhexidine and LT - alcohol-free essential oils) were evaluated. Mouthwash simulation was performed for 1 min at two moments, the first simulation after 4 h of microbial adhesion and 24 h-biofilm formation, and the second simulation, 6 h after the first simulation. For biofilm quantification, the number of cultured cells was evaluated by CFUs. The cytotoxicity assay was performed on HaCat epithelial cells and quantified by the MTT method. RESULTS: Tested solutions completely inhibited the growth of both microorganisms in the adhesion phase. All solutions showed inhibitory activity against 24 h-biofilm formation. However, CN led to greater microbial reduction, regardless of the surface of the sample. All solutions demonstrated a toxic effect. However, after serial dilution, CN presented the lowest cytotoxic effect. CONCLUSION: Citronella had a lower cytotoxic effect and a higher action compared to commercial solutions.

Cellulose nanofibers from lignocellulosic biomass of lemongrass using enzymatic hydrolysis: characterization and cytotoxicity assessment.

BACKGROUND: The lemongrass (LG) leaves could be a useful source of cellulose after its oil extraction, which is still either dumped or burned, not considered as a cost-effective approach. The synthesis of cellulose nanofibers (CNF) from LG waste has emerged as a beneficial alternative in the value-added applications. The non-toxicity, biodegradability, and biocompatibility of CNF have raised the interest in its manufacturing. METHOD: In the present study, we have isolated and characterized CNFs using enzymatic hydrolysis. We also explored the cytotoxic properties of the final material. The obtained products were characterized using dynamic light scattering (DLS), fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), x-ray diffraction (XRD), and thermogravimetric/differential thermal gravimetric analysis (TG/DTG). The cytotoxicity of CNF was assessed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay against three different cancer cell lines NCIH460, PA1, and L132 cells. RESULTS: The FT-IR results showed that the resulting sample was of cellulose species, and CNF was found free from the non-cellulosic components like lignin and hemicellulose. The SEM micrographs of the cellulose showed a bundle like structure. The TEM micrographs of CNF showed diverse long fibers structure with 105.7 nm particle size analysed using DLS. The TGA analysis revealed that the thermal stability was slightly lower, compared to cellulose. Additionally, CNF did not show the cytotoxic effect at the tested concentrations (~10-1000 µg/ml) in any of the cell lines. CONCLUSION: Overall, the results concluded that LG waste-derived CNF is a potential sustainable material and could be employed as a favourable reinforcing agent or nanocarriers in diverse areas, mainly in food and drug delivery sectors. Graphical abstract Systematic representation of the synthesis of the cellulose nanofibers: The lignocellulosic waste of lemongrass (after oil extraction) was pretreated for the isolation of raw cellulose, followed by enzyme hydrolysis for the synthesis of pure cellulose nanofibers.

PLGA nanoparticles optimized by Box-Behnken for efficient encapsulation of therapeutic Cymbopogon citratus essential oil.

This study aimed to optimize Cymbopogon citratus essential oil loaded into PLGA-nanoparticles by investigating the effect of processing variables (sonication time, ultrasound power, and essential oil/polymer ratio) on encapsulation efficiency and particle mean hydrodynamic diameter using Box-Behnken design. Nanoparticles were prepared by an emulsification/solvent diffusion method and physicochemically characterized by FTIR, DSC and TGA/DTA. Cytotoxicity was evaluated in human HaCat keratinocytes by WST-1 and LDH assays. The optimized formulation had a hydrodynamic mean diameter of 277 nm, a polydispersity index of 0.18, a Zeta potential of -16 mV and an encapsulation efficiency of 73%. Nanoparticle characterization showed that only citral was incorporated in nanocarriers, with some amount adsorbed on their surface, and highlighted the potential in increasing the oil thermal stability. The drug release profile demonstrated a biphasic pattern with a substantial sustained release depending on diffusion from the polymeric matrix. Toxicity effects on cell viability of pure essential oil at low concentrations were significantly eliminated when encapsulated. Results revealed the ability of PLGA-nanoparticles to improve essential oil physicochemical characteristics, by controlling release and reducing toxicity, suggesting their potential use in pharmaceutical preparations.

Application of poly(dimethylsiloxane) fiber sol-gel coated onto NiTi alloy electrodeposited with zirconium oxide for the determination of organochlorine pesticides in herbal infusions.

A PDMS fiber sol-gel coated onto an NiTi alloy previously electrodeposited with zirconium oxide (named NiTi-ZrO(2)-PDMS) was applied to the determination of organochlorine pesticides (OCPs) in infusions of peppermint (Mentha piperita L.), lemon grass (Cymbopogon citratus Stapf), chamomile (Matricaria recutita L.), lemon balm (Melissa officinalis L.), and anise seeds (Pimpinella anisum L.). Salting-out effect, extraction time, and extraction temperature were optimized firstly by means of a full-factorial design and then using a Doehlert matrix. No salt addition and 50 min of extraction at 70 degrees C were the optimum conditions. Satisfactory LODs in the range of 2-17 ng/L, as well as good correlation coefficients (at least 0.9981) in the linear range studied, were obtained. Calibration was successfully applied using an infusion of M. recutita L. and recovery tests were performed to ensure the accuracy of the method, with values in the range of 77-120%. Comparison of the NiTi-ZrO(2)-PDMS with commercially available PDMS fibers showed that the proposed fiber has an extraction efficiency comparable to that of PDMS 30 microm for the compounds evaluated, demonstrating its potential applicability.

Cymbopogon citratus essential oil: effect on polymicrobial caries-related biofilm with low cytotoxicity.

The objective of this study was to evaluate the effects of Cymbopogon citratus essential oil and its main compound (citral) against primary dental colonizers and caries-related species. Chemical characterization of the essential oil was performed by gas chromatography/mass spectroscopy (GC/MS), and the main compound was determined. Antimicrobial activity was tested against Actinomyces naeslundii, Lactobacillus acidophilus, S. gordonii, S. mitis, S. mutans, S. sanguinis and S. sobrinus. Minimum inhibitory and bactericide concentrations were determined by broth microdilution assay for streptococci and lactobacilli reference, and for clinical strains. The effect of the essential oil on bacterial adhesion and biofilm formation/disruption was investigated. Negative (without treatment) and positive controls (chlorhexidine) were used. The effect of citral on preformed biofilm was also tested using the same methodology. Monospecies and microcosm biofilms were tested. ANOVA or Kruskal-Wallis tests were used (α=0.05). Cytotoxicity of the essential oil to human keratinocytes was performed by MTT assay. GC/MS demonstrated one major component (citral). The essential oil showed an inhibitory effect on all tested bacterial species, including S. mutans and L. acidophilus. Essential oil of C. citratus (10X MIC) reduced the number of viable cells of lactobacilli and streptococci biofilms (p < 0.05). The essential oil inhibited adhesion of caries-related polymicrobial biofilm to dental enamel (p < 0.01). Citral significantly reduced the number of viable cells of streptococci biofilm (p < 0.001). The essential oil showed low cytotoxicity to human keratinocytes. Based on these findings, this study can contribute to the development of new formulations for products like mouthwash, against dental biofilms.

Development of Crystalline Cellulosic Fibres for Sustained Release of Drug.

Natural quinoline alkaloid camptothecin (CPT) is used for the treatment of colon, lung, breast and ovarian cancers still facing challenges due to low solubility in aqueous and biological fluids. Its lactone form easily converts into a toxic carboxylic form at slightly basic pH, typical in blood and tissue fluid has rapid clearance from systemic administration. We report a new approach based on micro crystalline cellulose (MCC) and nano crystalline cellulose (NCC) isolated from natural sources such as Cymbopogan flexuosus to stabilize and regulate the release kinetics of CPT in physiological solution. Langmuir and Freundlich isotherm studies approve that degree of crystallinity i.e. ratio of amorphous and crystalline cellulose regulate the adsorption of CPT. The freeze dried celluloses of Cymbopogan flexuosus origin (MCC and NCC) further were optimized for drug delivery with a mimicked physiologically relevant solution. Both carriers can significantly extend the release of drug as compared to reported values, however, NCC showed better results. Not only the crystallinity but crystal size and hydrogen bonding play critical role in drug release. Free diffusion of drug into physiological solution follows the Ritger- Peppes kinetic model. The coefficient of the model signifies the Fickian diffusion mechanism of release. The investigation indicates that NCC cellulosic matrix can act as a better carrier of CPT for its sustained release formulation.

In vitro Effects of Lemongrass Extract on Candida albicans Biofilms, Human Cells Viability, and Denture Surface.

The purpose of this study was to investigate whether immersion of a denture surface in lemongrass extract (LGE) has effects on C. albicans biofilms, human cell viability and denture surface. Minimal inhibitory concentration (MIC) and minimal fungicidal concentration (MFC) were performed for LGE against C. albicans. For biofilm analysis, discs were fabricated using a denture acrylic resin with surface roughness standardization. C. albicans biofilms were developed on saliva-coated discs, and the effects of LGE at MIC, 5XMIC, and 10XMIC were investigated during biofilm formation and after biofilm maturation. Biofilms were investigated for cell counting, metabolic activity, and microscopic analysis. The cytotoxicity of different concentrations of LGE to peripheral blood mononuclear cells (PBMC) was analyzed using MTT. The effects of LGE on acrylic resin were verified by measuring changes in roughness, color and flexural strength after 28 days of immersion. Data were analyzed by ANOVA, followed by a Tukey test at a 5% significance level. The minimal concentration of LGE required to inhibit C. albicans growth was 0.625 mg/mL, while MFC was 2.5 mg/mL. The presence of LGE during biofilm development resulted in a reduction of cell counting (p < 0.05), which made the MIC sufficient to reduce approximately 90% of cells (p < 0.0001). The exposure of LGE after biofilm maturation also had a significant antifungal effect at all concentrations (p < 0.05). When compared to the control group, the exposure of PBMC to LGE at MIC resulted in similar viability (p > 0.05). There were no verified differences in color perception, roughness, or flexural strength after immersion in LGE at MIC compared to the control (p > 0.05). It could be concluded that immersion of the denture surface in LGE was effective in reducing C. albicans biofilms with no deleterious effects on acrylic properties at MIC. MIC was also an effective and safe concentration for use.

Effect of Lippia alba and Cymbopogon citratus essential oils on biofilms of Streptococcus mutans and cytotoxicity in CHO cells.

BACKGROUND: Caries is a public health problem, given that it prevails in 60 to 90% of the school-age global population. Multiple factors interact in its etiology, among them dental plaque is necessary to have lactic acid producing microorganisms like Streptococcus from he Mutans group. Existing prevention and treatment measures are not totally effective and generate adverse effects, which is why it is necessary to search for complementary strategies for their management. AIM: The study sought to evaluate the eradication capacity of Streptococcus mutans biofilms and the toxicity on eukaryotic cells of Lippia alba and Cymbopogon citratus essential oils. METHODOLOGY: Essential oils were extracted from plant material through steam distillation and then its chemical composition was determined. The MBEC-high-throughput (MBEC-HTP) (Innovotech, Edmonton, Alberta, Canada) assay used to determine the eradication concentration of S. mutans ATCC 35668 strain biofilms. Cytotoxicity was evaluated on CHO cells through the MTT cell proliferation assay. RESULTS: The major components in both oils were Geraniol and Citral; in L. alba 18.9% and 15.9%, respectively, and in C. citratus 31.3% and 26.7%. The L. alba essential oils presented eradication activity against S. mutans biofilms of 95.8% in 0.01mg/dL concentration and C. citratus essential oils showed said eradication activity of 95.4% at 0.1, 0.01mg/dL concentrations and of 93.1% in the 0.001mg/dL concentration; none of the concentrations of both essential oils showed toxicity on CHO cells during 24h. CONCLUSION: The L. alba and C. citratus essential oils showed eradication activity against S. mutans biofilms and null cytotoxicity, evidencing the need to conduct further studies that can identify their active components and in order to guide a safe use in treating and preventing dental caries.