A Spironolactone-Based Prototype of an Innovative Biomedical Patch for Wound Dressing Applications.

The electrospinning process is an effective technique for creating micro- and nanofibers from synthetic and natural polymers, with significant potential for biomedical applications and drug delivery systems due to their high drug-loading capacity, large surface area, and tunable release times. Poly(L-lactic acid) (PLLA) stands out for its excellent thermo-mechanical properties, biodegradability, and bioabsorbability. Electrospun PLLA nanofibrous structures have been extensively investigated as wound dressings, sutures, drug delivery carriers, and tissue engineering scaffolds. This study aims to create and characterize electrospun PLLA membranes loaded with spironolactone (SP), mimicking active compounds of Ganoderma lucidum (GL), to develop a biodegradable patch for topical wound-healing applications. GL, a medicinal mushroom, enhances dermal wound healing with its bioactive compounds, such as polysaccharides and ganoderic acids. Focusing on GL extracts-obtained through green extraction methods-and innovative drug delivery, we created new fibers for wound-healing potential applications. To integrate complex mixtures of bioactive compounds into the fibers, we developed a prototype using a single pure substance representing the extract mixture. This painstaking work presents the results of the fabricating, wetting, moisture properties, material resilience, and full characterization of the product, providing a robust rationale for the fabrication of fibers imbued with more complex extracts.

Comparison of Amorphous Solid Dispersions of Spironolactone Prepared by Spray Drying and Electrospinning: The Influence of the Preparation Method on the Dissolution Properties.

This research aimed to compare two solvent-based methods for the preparation of amorphous solid dispersions (ASDs) made up of poorly soluble spironolactone and poly(vinylpyrrolidone-co-vinyl acetate). The same apparatus was used to produce, in continuous mode, drug-loaded electrospun (ES) and spray-dried (SD) materials from dichloromethane and ethanol-containing solutions. The main differences between the two preparation methods were the concentration of the solution and application of high voltage. During electrospinning, a solution with a higher concentration and high voltage was used to form a fibrous product. In contrast, a dilute solution and no electrostatic force were applied during spray drying. Both ASD products showed an amorphous structure according to differential scanning calorimetry and X-ray powder diffraction results. However, the dissolution of the SD sample was not complete, while the ES sample exhibited close to 100% dissolution. The polarized microscopy images and Raman microscopy mapping of the samples highlighted that the SD particles contained crystalline traces, which can initiate precipitation during dissolution. Investigation of the dissolution media with a borescope made the precipitated particles visible while Raman spectroscopy measurements confirmed the appearance of the crystalline active pharmaceutical ingredient. To explain the micro-morphological differences, the shape and size of the prepared samples, the evaporation rate of residual solvents, and the influence of the electrostatic field during the preparation of ASDs had to be considered. This study demonstrated that the investigated factors have a great influence on the dissolution of the ASDs. Consequently, it is worth focusing on the selection of the appropriate ASD preparation method to avoid the deterioration of dissolution properties due to the presence of crystalline traces.

Ocular Biodistribution of Spironolactone after a Single Intravitreal Injection of a Biodegradable Sustained-Release Polymer in Rats.

Sustained-release formulations for ocular delivery are of increasing interest given their potential to significantly improve treatment efficacy and patient adherence. The objectives of this study were (i) to develop a sustained-release formulation of spironolactone (SPL) using a biodegradable and injectable polymer, hexyl-substituted poly-lactic acid (hexPLA) and (ii) to investigate the ocular biodistribution and tolerability of SPL and its metabolites in rats in vivo over 1 month following a single intravitreal injection (IVT inj). The concentrations of SPL and its two principal active metabolites, 7α-thiomethylspironolactone and canrenone (CAN), in the different ocular compartments were determined at different time points (3, 7, and 31 days after IVT inj) using a validated ultra-high-performance liquid chromatography-mass spectrometry method. Systemic exposure following a single IVT inj of 5% SPL-hexPLA formulation was evaluated by quantifying SPL and its metabolites in the plasma. Ocular tolerability of the formulation was evaluated using in vivo retinal imaging and histology. In vitro release studies revealed a sustained release of SPL from 5% SPL-hexPLA for up to 65 days. In vivo studies showed that SPL and its metabolites were detected in all ocular tissues at 3 and 7 days post-IVT inj. At 31 days post-IVT inj, SPL and CAN were mainly detected in the retina. These results also highlighted the clearance pathway of SPL and its metabolite involving the anterior and posterior routes in the first week (days 3 and 7), then mainly the posterior segment in the last week (day 31). This study showed that a single IVT inj of 5% SPL-hexPLA in rats enabled sustained delivery of therapeutic amounts of SPL for up to 1 month to the retina without systemic exposure. This formulation may be of interest for the local treatment of diseases involving overactivation of the mineralocorticoid receptor in the chorioretina such as chronic central serous chorioretinopathy.

Mineralocorticoid receptor mediated liposomal delivery system for targeted induction of apoptosis in cancer cells.

Mineralocorticoid receptors (MRs) are nuclear hormone receptors that are ubiquitously present in all cell types and are known to mediate distinct physiological functions like regulating Na(+) and K(+) balance and water excretion. MRs are linked to cell proliferation and can be exploited for the targeted control of cell mass in cancer. The present study is aimed towards extending the concept of using MR ligand spironolactone for selective delivery of genes in cancer cells. The lipoplex (SP) has shown MR mediated targeted transfections as indicated by receptor down-regulation studies using MR antagonists and siRNA. SP-targeted delivery of genes resulted in apoptosis in cell-specific manner while free drug was found to be cytotoxic irrespective of the cancerous or non-cancerous nature. In conclusion, this study presents MR as a target for efficiently delivering anticancer genes and thereby treating cancer through MR-mediated pathway.

Effect of polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer on bioadhesion and release rate property of eplerenone pellets.

The present study involved the design and development of oral bioadhesive pellets of eplerenone. A solid dispersion of eplerenone was developed with a hydrophilic carrier, polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer (Soluplus®). Bioadhesive pellets were prepared from this solid dispersion using a combination of HPMC K4M and Carbopol 934P. Both the solid dispersion and the pellets were evaluated for various physicochemical properties such as solubility, entrapment efficiency, drug content, surface morphology, mucoadhesion and swelling behavior. Analysis carried out using FT-IR, DSC and XRD found no interaction between the eplerenone and excipients. The solid dispersion had irregular-shaped smooth-surfaced particles of diameter 265 ± 105.5 µm. In TEM analysis, eplerenone particles of size 79-120 nm were found. The solubility and dissolution of eplerenone in the Soluplus®-based solid dispersion were 5.26 and 2.50 times greater, respectively. Investigation of the swelling behavior of the pellets showed that the thickness of the gel layer increased continuously over the duration of the study. Moreover, a correlation was observed between the thickness and strength of the gel layer and the percentage release. The mechanism of drug release was found to be non-Fickian (anomalous), with the release kinetics approaching first-order kinetics. The bioavailability of the eplerenone bioadhesive pellet formulation was studied using Wistar rats and was found to be improved. An in vivo mucoadhesion study showed that the pellets are retained for 24 h in rabbits. It was concluded that Soluplus® had a positive effect on the solubility and dissolution of pellets without affecting the bioadhesion.

Functional assessment of four types of disintegrants and their effect on the spironolactone release properties.

Spironolactone is a drug derived from sterols that exhibits an incomplete oral absorption due to its low water solubility and slow dissolution rate. In this study, formulations of spironolactone with four disintegrants named as croscarmellose sodium, crospovidone, sodium starch glycolate and microcrystalline cellulose II (MCCII) were conducted. The effect of those disintegrants on the tensile strength, disintegration time and dissolution rate of spironolactone-based compacts was evaluated using a factorial design with three categorical factors (filler, lubricant, and disintegrant). The swelling values, water uptake and water sorption studies of these disintegrants all suggested that MCCII compacts disintegrate by a wicking mechanism similar to that of crospovidone, whereas a swelling mechanism was dominant for sodium starch glycolate and croscarmellose sodium. The disintegration time of MCCII and sodium starch glycolate remained unchanged with magnesium stearate. However, this lubricant delayed the disintegration time of crospovidone and croscarmellose sodium. MCCII presented the fastest disintegration time independent of the medium and lubricant employed. The water sorption ratio and swelling values determined sodium starch glycolate followed by croscarmellose sodium as the largest swelling materials, whereas crospovidone and MCCII where the least swelling disintegrants. The swelling property of sodium starch glycolate and croscarmellose sodium was strongly affected by the medium pH. The disintegration time of spironolactone compacts was faster when starch was used as a filler due to the formation of soft compacts. In this case, the type of filler employed rather than the disintegrant had a major effect on the disintegration and dissolution times of spironolactone.

Mineralocorticoid Receptor Pathway and Its Antagonism in a Model of Diabetic Retinopathy.

Diabetic retinopathy remains a major cause of vision loss worldwide. Mineralocorticoid receptor (MR) pathway activation contributes to diabetic nephropathy, but its role in retinopathy is unknown. In this study, we show that MR is overexpressed in the retina of type 2 diabetic Goto-Kakizaki (GK) rats and humans and that cortisol is the MR ligand in human eyes. Lipocalin 2 and galectin 3, two biomarkers of diabetes complications regulated by MR, are increased in GK and human retina. The sustained intraocular delivery of spironolactone, a steroidal mineralocorticoid antagonist, decreased the early and late pathogenic features of retinopathy in GK rats, such as retinal inflammation, vascular leakage, and retinal edema, through the upregulation of genes encoding proteins known to intervene in vascular permeability such as Hey1, Vldlr, Pten, Slc7a1, Tjp1, Dlg1, and Sesn2 but did not decrease VEGF. Spironolactone also normalized the distribution of ion and water channels in macroglial cells. These results indicate that MR is activated in GK and human diabetic retina and that local MR antagonism could be a novel therapeutic option for diabetic retinopathy.

Preparation and characterization of spironolactone-loaded gelucire microparticles using spray-drying technique.

The basic objectives of this study were to prepare and characterize solid dispersions of poorly soluble drug spironolactone (SP) using gelucire carriers by spray-drying technique. The properties of the microparticles produced were studied by differential scanning calorimetry (DSC), scanning electron microscopy, saturation solubility, encapsulation efficiency, and dissolution studies. The absence of SP peaks in DSC profiles of microparticles suggests the transformation of crystalline SP into an amorphous form. The in vitro dissolution test showed a significant increase in the dissolution rate of microparticles as compared with pure SP and physical mixtures (PMs) of drug with gelucire carriers. Therefore, the dissolution rate of poorly water-soluble drug SP can be significantly enhanced by the preparation of solid dispersion using spray-drying technique.

Corona alternating current electrospinning: A combined approach for increasing the productivity of electrospinning.

Corona alternating current electrospinning (C-ACES), a scaled-up productivity electrospinning method was developed by combining the intense forces of the alternating electrostatic field and a sharp-edged spinneret design with increased free surface. C-ACES reached two orders of magnitude higher productivity (up to 1200 mL/h) than the classical single needle direct current electrospinning (DCES) without any alteration of fiber properties. Polyvinylpyrrolidone K90 (PVPK90), a water soluble high molecular weight nonionic polymer was processed for the first time with single needle alternating current electrospinning (ACES) and C-ACES in order to prepare fast dissolving amorphous solid dispersions of spironolactone (SPIR), a poorly water-soluble antihypertensive model drug. The limited spinnability of PVPK90 with AC high voltage could only be resolved by optimizing the solution conductivity with organophilic salts such as sodium dodecyl sulfate (SDS) demonstrating the importance of conductivity during ACES. The effects of varied solution properties (composition and conductivity) and scaling-up were investigated by SEM imaging. Solid state analyses revealed that SPIR was dispersed in an amorphous form in the fibrous mats. In vitro dissolution tests showed ultrafast drug release in case of the amorphous formulations even when prepared with scaled-up C-ACES. Besides the enhancement of conductivity SDS also prevents SPIR from precipitation from the dissolution media due to its solubilization ability.

Solubilisation of drugs in worm-like micelles of block copolymers of ethylene oxide and 1,2-butylene oxide in aqueous solution.

Ethylene oxide and 1,2-butylene oxide were sequentially polymerised to form the diblock copolymer E13B10 (E=oxyethylene, B=oxybutylene, subscripts denote number-average block lengths in repeat units). Dynamic and static light scattering over the temperature range 10-30 degrees C demonstrated a transition from compact (spheroidal) micelles to larger, more elongated (worm-like) micelles with temperature increase above a critical onset temperature of about 20 degrees C. Determination of the solubilisation capacity for griseofulvin, carbamazepine and spironolactone of dilute micellar solutions of this copolymer, together with those of E11B8 and E17B12 block copolymers (which also show the sphere-to-worm transition), allowed investigation of the influence on solubilisation characteristics of hydrophobic block length and temperature. The extent of solubilisation at 25 degrees C of the poorly water-soluble drug spironolactone increased linearly with increase of hydrophobic block length, attributable to a concomitant increase in the proportion of worm-like micelles in solution.

[Thermosensitive polymers in drug form technology. II. Possibilities of use of thermosensitive polymers as active substance carriers]. / Termowrazliwe polimery w technologii postaci leku. II. Mozliwosci zastosowania polimerów termowrazliwych jako nosników substancji leczniczej.

Thermosensitive drug delivery can be used as substances carriers, which are applied in oral system, vaginal systems of release, applied on skin, the rectal, nasal, passed to eyes and parenteral. Sol-gel transition of the prepared formulations at physiological temperature ranges of the body makes possible their application in the liquid state and subsequent gelification in situ providing a prolonged release of the active substance at the application site.

Novel Alternating Current Electrospinning of Hydroxypropylmethylcellulose Acetate Succinate (HPMCAS) Nanofibers for Dissolution Enhancement: The Importance of Solution Conductivity.

Novel, high-yield alternating current electrospinning (ACES) and direct current electrospinning methods were investigated to prepare high-quality hydroxypropylmethylcellulose acetate succinate (HPMCAS) fibers for the dissolution enhancement of poorly soluble spironolactone. Although HPMCAS is of great pharmaceutical importance as a carrier of marketed solid dispersion-based products, it was found to be unprocessable using electrospinning. Addition of small amounts of polyethylene oxide as aid polymer provided smooth fibers with direct current electrospinning but strongly beaded products with ACES. Solution characteristics were thus modified by introducing further excipients. In the presence of sodium dodecyl sulfate, high-quality, HPMCAS-based fibers were obtained even at higher throughput rates of ACES owing to the change in conductivity (rather than surface tension). Replacement of sodium dodecyl sulfate with non-surface-active salts (calcium chloride and ammonium acetate) maintained the fine quality of nanofibers, confirming the importance of conductivity in ACES process. The HPMCAS-based fibers contained spironolactone in an amorphous form according to differential scanning calorimetry and X-ray powder diffraction. In vitro dissolution tests revealed fast drug release rates depending on the salt used to adjust conductivity. The presented results signify that ACES can be a prospective process for high-scale production of fibrous solid dispersions in which conductivity of solution has a fundamental role.

Nanostructured DPA-MPC-DPA triblock copolymer gel for controlled drug release of ketoprofen and spironolactone.

OBJECTIVE: Uncontrolled rapid release of drugs can reduce their therapeutic efficacy and cause undesirable toxicity; however, controlled release from reservoir materials helps overcome this issue. The aims of this study were to determine the release profiles of ketoprofen and spironolactone from a pH-responsive self-assembling DPA-MPC-DPA triblock copolymer gel and elucidate underlying physiochemical properties. METHODS: Drug release profiles from DPA50 -MPC250 -DPA50 gel (pH 7.5), over 32 h (37 °C), were determined using UV-Vis spectroscopy. Nanoparticle size was measured by dynamic light scattering (DLS) and critical micelle concentration (CMC) by pyrene fluorescence. Polymer gel viscosity was examined via rheology, nanoparticle morphology investigated using scanning transmission electron microscopy (STEM) and the gel matrix observed using cryo-scanning electron microscopy (Cryo-SEM). KEY FINDINGS: DPA50 -MPC250 -DPA50 copolymer (15% w/v) formed a free-standing gel (pH 7.5) that controlled drug release relative to free drugs. The copolymer possessed a low CMC, nanoparticle size increased with copolymer concentration, and DLS data were consistent with STEM. The gel displayed thermostable viscosity at physiological temperatures, and the gel matrix was a nanostructured aggregation of smaller nanoparticles. CONCLUSIONS: The DPA50 -MPC250 -DPA50 copolymer gel could be used as a drug delivery system to provide the controlled drug release of ketoprofen and spironolactone.

Tolerance of high and low amounts of PLGA microspheres loaded with mineralocorticoid receptor antagonist in retinal target site.

Mineralocorticoid receptor (MR) contributes to retinal/choroidal homeostasis. Excess MR activation has been shown to be involved in pathogenesis of central serous chorioretinopathy (CSCR). Systemic administration of MR antagonist (MRA) reduces subretinal fluid and choroidal vasodilation, and improves the visual acuity in CSCR patients. To achieve long term beneficial effects in the eye while avoiding systemic side-effects, we propose the use of biodegradable spironolactone-loaded poly-lactic-co-glycolic acid (PLGA) microspheres (MSs). In this work we have evaluated the ocular tolerance of MSs containing spironolactone in rat' eyes. As previous step, we have also studied the tolerance of the commercial solution of canrenoate salt, active metabolite of spironolactone. PLGA MSs allowed in vitro sustained release of spironolactone for 30days. Rat eyes injected with high intravitreous concentration of PLGA MSs (10mg/mL) unloaded and loaded with spironolactone maintained intact retinal lamination at 1month. However enhanced glial fibrillary acidic protein immunostaining and activated microglia/macrophages witness retinal stress were observed. ERG also showed impaired photoreceptor function. Intravitreous PLGA MSs concentration of 2mg/mL unloaded and loaded with spironolactone resulted well tolerated. We observed reduced microglial/macrophage activation in rat retina compared to high concentration of MSs with normal retinal function according to ERG. Spironolactone released from low concentration of MSs was active in the rat retina. Low concentration of spironolactone-loaded PLGA MSs could be a safe therapeutic choice for chorioretinal disorders in which illicit MR activation could be pathogenic.

Preparation and characterization of spironolactone-loaded nanocapsules for paediatric use.

Spironolactone is a steroidal diuretic showing incomplete oral behaviour because of its low solubility and slow dissolution rate. In this study, we applied the nanoprecipitation method to prepare spironolactone-loaded nanocapsules, at laboratory-scale and pilot-scale. The effect of several formulation variables on the spironolactone-loaded nanocapsules properties (average size, drug release rate and drug entrapment) was investigated. The optimized formulations at laboratory-scale and pilot-scale lead to the preparation of spironolactone-loaded nanocapsules with a mean size of 320 and 400 nm, respectively, a high encapsulation efficiency (96.21% and 90.56% respectively), both stable for 6 months. The release of spironolactone from nanocapsules was rapid and complete in a simulated gastric fluid, therefore recourse to spironolactone nanoencapsulation should enhance its oral bioavailability and probably its efficiency. The optimized formulations lead to a high drug-concentration in the liquid preparation (1.5 mg/ml) allowing minimizing the preparation volume administered for children medication.

AC and DC electrospinning of hydroxypropylmethylcellulose with polyethylene oxides as secondary polymer for improved drug dissolution.

Alternating current electrospinning (ACES) capable to reach multiple times higher specific productivities than widely used direct current electrospinning (DCES) was investigated and compared with DCES to prepare drug-loaded formulations based on one of the most widespread polymeric matrix used for commercialized pharmaceutical solid dispersions, hydroxypropylmethylcellulose 2910 (HPMC). In order to improve the insufficient spinnability of HPMC (both with ACES and DCES) polyethylene oxide (PEO) as secondary polymer with intense ACES activity was introduced into the electrospinning solution. Different grades of this polymer used at as low concentrations in the fibers as 0.1% or less enabled the production of high quality HPMC-based fibrous mats without altering its physicochemical properties remarkably. Increasing concentrations of higher molecular weight PEOs led to the thickening of fibers from submicronic diameters to several microns of thickness. ACES fibers loaded with the poorly water-soluble model drug spironolactone were several times thinner than drug-loaded fibers prepared with DCES in spite of the higher feeding rates applied. The amorphous HPMC-based fibers with large surface area enhanced the dissolution of spironolactone significantly, the presence of small amounts of PEO did not affect the dissolution rate. The presented results confirm the diverse applicability of ACES, a novel technique to prepare fibrous drug delivery systems.

Design of freeze-dried Soluplus/polyvinyl alcohol-based film for the oral delivery of an insoluble drug for the pediatric use.

Spironolactone (SL) is a poorly water-soluble drug. Being poorly soluble affects its dissolution rate which in turn affects its oral bioavailability. This work aimed to prepare freeze-dried SL-Soluplus/polyvinyl alcohol (PVA) oral thin film in an attempt to enhance the drug solubility on one hand and at the same time prepare a solid dosage form convenient for the pediatric use. SL-Soluplus/PVA films were prepared using polyethylene glycol 400 (PEG 400) as a plasticizer applying the solvent-casting technique. The prepared films were evaluated for their thickness, tensile strength, and in vitro dissolution studies. Box-Behnken design (17 runs) was applied to optimize the effects of the formulation variables on the film properties. The optimized film formulation was freeze-dried after casting so as to enhance the drug dissolution. Moreover, the optimized freeze-dried film was re-characterized in vitro and evaluated in vivo in human volunteers to investigate its palatability and satisfaction. The results showed that the optimized formulation composed of 10% polymer concentration containing Soluplus:PVA (0.33:0.66) and plasticized with 30% PEG 400 possessed the highest desirability value (0.836). Freeze-drying of the optimized formulation succeeded to improve SL in vitro dissolution due to the preparation of a more porous film compared to the non-freeze-dried one. In vivo evaluation of the optimized freeze-dried film showed high satisfaction among the participating volunteers concerning the ease of administration and sensation thereafter, where all the film specimens dissolved without the need for water and no film residues remained in the mouth following film dissolution. In conclusion, freeze-dried Soluplus®/PVA-based oral thin film proved to be a successful carrier for the oral delivery of insoluble drugs like SL for pediatrics.

Inflammatory monocyte/macrophage modulation by liposome-entrapped spironolactone ameliorates acute lung injury in mice.

AIM: To examine the therapeutic/preventive potential of liposome-encapsulated spironolactone (SP; Lipo-SP) for acute lung injury (ALI) and fibrosis. MATERIALS & METHODS: Lipo-SP was prepared by the film-ultrasonic method, and physicochemical and pharmacokinetic characterized for oral administration (10 and 20 mg/kg for SP-loaded liposome; 20 mg/kg for free SP) in a mouse model bleomycin-induced ALI. RESULTS: Lipo-SP enhanced bioavailability of SP with significant amelioration in lung pathology. Mechanistically, SP-mediated mineralocorticoid receptor antagonism contributes to inflammatory monocyte/macrophage modulation via an inhibitory effect on Ly6C(hi) monocytosis-directed M2 polarization of alveolar macrophages. Moreover, Lipo-SP at lower dose (10 mg/kg) exhibited more improvement in body weight gain. CONCLUSION: Our data highlight Lipo-SP as a promising approach with therapeutic/preventive potential for ALI and fibrosis.

Formulation optimization and in vitro skin penetration of spironolactone loaded solid lipid nanoparticles.

The aim of the current investigation was to prepare and evaluate the potential use of solid lipid nanoparticles for the dermal delivery of spironolactone (SP). The spironolactone loaded SLN (SP-SLN) was prepared by emulsion-solvent evaporation method followed by ultrasonication. The properties of obtained SLNs were characterized by photon correlation spectroscopy (PCS), scanning tunneling microscopy (STM) and differential scanning calorimetry. FT-IR was also used to investigate any interaction between SP and excipients in the molecular level during the preparation of SLNs. The performance of the formulations was investigated in terms of drug release, skin permeation and also the retention of drug by the skin. The SP-SLNs presented spherical shape with the mean diameter, zeta potential and entrapment efficiency of 88.9 nm, -23.9 mV and 59.86%, respectively. DSC study showed that SP alone encapsulated in SLNs was in the amorphous form. FT-IR analysis revealed that there were hydrogen bond interactions between the SP alone and SLN components. The dissolution results revealed that the drug release from SP-SLNs was at least 4.9 times faster than original SP within the first 30 min. The cumulative amount of SP penetrated through rat skin from SP-SLNs was almost twofold that of the SP alone in 24h after the administration. In vitro permeation studies indicated that SP-SLN may be a promising vector for use in the topical treatment. It can be concluded that SLNs provide good skin permeation for SP and may be a promising carrier for topical delivery of spironolactone offering the biphasic release pattern that might be interesting for topical application resulting in an effective treatment for skin disorders such as acne.

Transformation and nuclear translocation of brain type L corticosteroid receptors complexed with the mineralocorticoid antagonist ZK 91587, aldosterone or dexamethasone.

Type I corticosteroid receptors were determined in cytosol from hippocampus (HIPPO) and amygdala (AMYG), using [3H]aldosterone (ALDO), [3H]dexamethasone (DEX) or the mineralocorticoid antagonist [3H]ZK 91587 as ligands. Incubations with the first two compounds also contained the pure glucocorticoid RU 28362 to block type II receptors. Binding of the three ligands was comparable in cytosol from HIPPO and it was slightly higher for [3H]DEX in AMYG. However, after heat-induced receptor transformation, binding to DNA-cellulose was observed for [3H]ALDO-receptor complex obtained from HIPPO or AMYG, whereas it was negligible for [3H]ZK 91587. Receptors charged with [3H]DEX or [3H]ALDO showed similar retention on DNA-cellulose columns in the case of the AMYG, while binding to the polynucleotide was higher for [3H]ALDO in the HIPPO. Finally, only [3H]ALDO was taken up to a significant extent in purified cell nuclei prepared from slices of HIPPO and AMYG previously incubated with the three ligands. It is concluded that binding of a natural agonist steroid may be a prerequisite for type I receptor transformation and translocation from the cytoplasm into the nuclear fraction. DEX binding to type I receptors resembles a partial agonist with antagonist properties, whereas antagonists such as ZK 91587 are bound and retained in cytoplasm, without further translocation.