Transformation of Al Species on Carbon Surfaces: Effects of Al Species and Carbon Surface Oxygen Groups.

Control of residual Al is critical, owing to its high tendency to accumulate in drinking water distribution systems and its potential risks to human health. Herein, the effects of surface properties of activated carbon (AC) on intercepting different Al species (including monomeric Al and polymeric Al species-Al13) are evaluated. The results showed that Al in the form of monomers was considerably adsorbed by AC; whereas Al in the form of polymeric Al13 was held to a much lower degree by AC, and the effluent Al concentration was even higher than that without AC. By comparing virgin AC and hydrogen thermal treated AC, the surface oxygen functional groups on the AC were proposed to play a critical role in the transformation of Al species. The oxygen functional groups on the AC surface can directly form complexes with monomeric Al, thereby inducing the binding of monomeric Al on the AC surface. However, the AC surface oxygen groups could not bind to polymeric Al13, and the interaction between AC surface oxygen groups and polymeric Al13 partially transforms Al13 into monomeric Al species, which inhibited the self-aggregation of Al13. This study aims to provide new insights into the control of residual Al in water treatment plants to ensure drinking water safety.

Anaerobic membrane bioreactor coupled with polyaluminum chloride for high-strength phenolic wastewater treatment: Robust performance and potential mechanisms.

Anaerobic digestion of phenolic wastewater by anaerobic membrane bioreactor (AnMBR) has revealed increasing attractiveness, but the application of AnMBRs for treating high-strength phenolic wastewater faces challenges related to elevated phenol stress and membrane fouling. In this study, the coupling of AnMBR and polyaluminum chloride (PAC) was developed for efficient treatment of high-strength phenolic wastewater. The system achieved robust removal efficiencies of phenol (99%) and quinoline (98%) at a gradual increase of phenol concentration from 1000 to 5000 mg/L and a constant quinoline concentration of 100 mg/L. The dosing of PAC could effectively control the membrane fouling rate with the transmembrane pressure (TMP) increasing rate as low as 0.17 kPa/d. The robust performances were mainly attributed to the favorable retention of functional microbes through membrane interception, while pulse cross flow buffered against phenol stress and facilitated cake layer removal. Meanwhile, the enriched core functional microbes, such as Syntrophorhabdus, Syntrophus, Mesotoga and Methanolinea, played a crucial role in further reduction of phenol stress. Notably, the significant presence of biomacromolecule degrader, such as Levilinea, contributed to membrane fouling mitigation through extracellular polymer degradation. Moreover, the enlargement of particle size distribution (PSD) by PAC was expected to mitigate membrane fouling. This study provided a promising avenue for sustainable treatment of high-strength phenolic wastewater.

The impact of recycling polyaluminium chloride and anionic polyacrylamide water treatment residuals on heavy metal adsorption in soils: implications for stormwater bioretention systems.

Despite the high adsorption capacity of polyaluminum chloride and anionic polyacrylamide water treatment residuals (PAC-APAM WTRs) for Pb2+, Cd2+, Cu2+, and Zn2+, their influence on the adsorption behavior of heavy metals in traditional bioretention soil media remains unclear. This study investigated the impact of PAC-APAM WTRs at a 20% weight ratio on the adsorption removal of Pb2+, Cd2+, Cu2+, and Zn2+ in three types of soils. The results demonstrated improved heavy metal adsorption in the presence of PAC-APAM WTRs, with enhanced removal observed at higher pH levels and temperatures. The addition of PAC-APAM WTRs augmented the maximum adsorption capacity for Pb2+ (from 0.98 to 3.98%), Cd2+ (from 0.52 to 10.99%), Cu2+ (from 3.69 to 36.79%), and Zn2+ (from 2.63 to 13.46%). The Langmuir model better described the data in soils with and without PAC-APAM WTRs. The pseudo-second-order model more accurately described the adsorption process, revealing an irreversible chemical process, although qe demonstrated improvement with the addition of PAC-APAM WTRs. This study affirms the potential of PAC-APAM WTRs as an amendment for mitigating heavy metal pollution in stormwater bioretention systems. Further exploration of the engineering application of PAC-APAM WTRs, particularly in field conditions for the removal of dissolved heavy metals, is recommended.

New insights into membrane fouling in coagulation-ultrafiltration by cake characteristics analysis: A case study with PACl-Al13 and PACl.

Membrane fouling is a bottleneck issue that hindered the further application of ultrafiltration technology. To alleviate membrane fouling, coagulation-ultrafiltration (C-UF) process using polyaluminum chloride (PACl) and PACl-Al13 with high proportion of Al13O4(OH)247+ as coagulants, respectively, were investigated at various pH conditions. Results indicated that an increase in solution pH contributed to larger floc size and looser floc structure for both PACl and PACl-Al13. It was conducive to the formation of more porous cake, as evidenced by mean pore area and pore area distribution of cake, leading to lower reversible fouling. Furthermore, humic acid (HA) removal presented a trend of first increasing and then decreasing with the increase of pH. The optimal HA removal was achieved at pH 6 regardless of coagulant type, suggesting that the slightest irreversible fouling should be occurred at this point. Interestingly, the irreversible fouling with PACl coagulant achieved a minimum value at pH 9, while the minimal irreversible fouling with PACl-Al13 was observed at pH 6. We speculated that the cake formed by PACl could further intercept HA prior to UF process at alkaline pH. Furthermore, compared with PACl, PACl-Al13 had a stronger charge neutralization ability, thus contributing to more compact floc structure and higher HA removal at various pH conditions. By UF fractionation measurement, higher HA removal for PACl-Al13 was due to higher removal of HA with molecular weight less than 50 kDa.

Effect of an Antacid (Aluminum Hydroxide/Magnesium Hydroxide/Simethicone) or a Proton Pump Inhibitor (Omeprazole) on the Pharmacokinetics of Tebipenem Pivoxil Hydrobromide (TBP-PI-HBr) in Healthy Adult Subjects.

Tebipenem pivoxil hydrobromide (TBP-PI-HBr) is a novel oral carbapenem prodrug being developed for the treatment of serious bacterial infections. This open-label, 3-period, fixed sequence study evaluated the effect of gastric acid-reducing agents, aluminum hydroxide/magnesium hydroxide/simethicone, and omeprazole on the pharmacokinetics (PK) of tebipenem (TBP), the active moiety, following coadministration with immediate release TBP-PI-HBr during fasting. In Period 1, subjects received a single oral dose of TBP-PI-HBr 600 mg (2 × 300 mg tablets). In Period 2, subjects received a single oral dose of aluminum hydroxide 800 mg/magnesium hydroxide 800 mg/simethicone 80 mg suspension co-administered with a single dose of TBP-PI-HBr 600 mg. In Period 3, subjects received a single oral dose of omeprazole 40 mg once daily over 5 days, followed by single dose administration of TBP-PI-HBr 600 mg on day 5. In each period, whole blood samples were obtained prior to, and up to 24 h, following TBP-PI-HBr dose administration in order to characterize TBP PK. A 7-day washout was required between periods. Twenty subjects were enrolled and completed the study. Following co-administration of TBP-PI-HBr with either aluminum hydroxide/magnesium hydroxide/simethicone or omeprazole, total TBP exposure (area under the curve [AUC]) was approximately 11% (geometric mean ratio 89.2, 90% confidence interval: 83,2, 95.7) lower, and Cmax was 22% (geometric mean ratio 78.4, 90% confidence interval: 67.9, 90.6) and 43% (geometric mean ratio 56.9, 90% confidence interval: 49.2, 65.8) lower, respectively, compared to administration of TBP-PI-HBr alone. Mean TBP elimination half-life (t1/2) was generally comparable across treatments (range: 1.0 to 1.5 h). Concomitant administration of TBP-PI-HBr with omeprazole or aluminum hydroxide/magnesium hydroxide/simethicone is not expected to impact the efficacy of TBP-PI-HBr, as there is minimal impact on TBP plasma AUC, which is the pharmacodynamic driver of efficacy. Co-administration was generally safe and well tolerated.

Enhanced coagulation process for removing dissolved organic matter, microplastics, and silver nanoparticles.

Dissolved organic carbon (DOC), microplastics (MPs), and silver nanoparticles (AgNPs) in water are of major concern because of their direct and indirect toxic effects on aquatic organisms and human exposure via water. This work investigated the effect of poly aluminum chloride (PACl) coagulation for reducing DOC, MPs, and AgNPs. This work used water from a canal in Thailand with a DOC of 5.2 mg/L in the experiment. AgNPs of 5-20 mg/L were added to canal water to create synthetic water for the PACl coagulation. Polyethylene and polypropylene (PP) type MPs were identified in the raw water with Fourier transform infrared spectroscopy. Coagulation with 15 mg/L of PACl performed better in the PP removal. The PACl coagulation at dosages of 15, 40, and 70 mg/L removed DOC by 16-20%, 44-52%, and 46-63% and AgNPs by 34-90%, 53-93%, and 81-95%, respectively. The presence of AgNPs at high levels could inhibit the efficiency of DOC reduction by the PACl coagulation. The FESEM identified the adsorption of silver-containing nanoparticles onto the flocs with increased dosages of PACl. So, PACl is a coagulant in the removal of AgNPs that can reduce health hazards and eco-toxicological risks in water sources due to the release of silver.

Adsorption of pyridine from aqueous solutions onto polyaluminium chloride and anionic polyacrylamide water treatment residuals.

The adsorption performance of pyridine onto polyaluminium chloride (PAC) and anionic polyacrylamide (APAM) water treatment residuals (WTRs) was investigated by batch experiments. This study confirmed the assumption that PAC-APAM WTRs had the ability to remove pyridine. The non-linear Dubinin-Radushkevich model and non-linear Freundlich model better described the isotherms, indicating that the adsorption was a chemically controlled multilayer process. The pyridine adsorption rate was simultaneously controlled by external film diffusion and intraparticle diffusion. The adsorption of pyridine was an endothermic reaction with randomness increase. The pyridine adsorption decreased with pH increase. Pyridine removal was observed to be a linear increase from 6.16% to 96.18%, with the increase of dosage from 2.5 g/L to 15 g/L. The Langmuir maximum adsorption capacity was 3.605 mg/g while the theoretical isotherm saturation capacity was 9.823 mg/g. Therefore, PAC-APAM WTRs recycled into contaminated soils for remediation is expected to be an innovative alternative disposal method. More research is recommended in the future to identify detailed adsorption mechanisms and the most appropriate mixing ratio of PAC-APAM WTRs to contaminated soils under various climatic conditions.

Preparation and characterization of PAN nanofibers containing boehmite nanoparticles for the removal of microbial contaminants and cadmium ions from water.

Nanofibers of polyacrylonitrile (PAN)/boehmite were prepared by electrospinning a homogeneous solution of PAN/DMF (dimethyl formamide). Enhancing the amount of boehmite nanoparticles (NPs) led to increase in the nanofibers' diameter. Samples had high pure water flux, which did not change significantly with boehmite concentration, but decreased with increasing electrospinning duration. Escherichia coli bacteria removal was remarkably more efficient, as it was enhanced from 72.33% to 97.37% with increase in the boehmite NPs' concentration from 0 to 10% wt. High bacterial removal efficiency could be attained by the large surface area of NPs, as well as the electrostatic force of attraction between NPs and microorganisms. The increase in boehmite concentration from 10 to 30 and 50% did not noticeably affect bacterial removal. Prolonging electrospinning time significantly enhanced bacteria removal. Hence, it was shown that 6-hour electrospinning of PAN/boehmite nanofiber layers composed of 50% boehmite led to 99.7%, 99.39%, 99.8%, and 74% E. coli, Staphylococcus aureus bacteria removal, particles' separation efficiency of 2 µm and cadmium adsorptivity, respectively, which were better than those obtained by using pure PAN nanofibers. E. coli bacterial removal efficiency of the sample was increased to 99.99% by repeating filtering four times. Considering the results, this PAN/boehmite nanofibers' membrane has potential application to purification of drinking water.

Synthesis of Hydrotalcites from Waste Steel Slag with [Bmim]OH Intercalated for the Transesterification of Glycerol Carbonate.

Ca-Mg-Al hydrotalcites were prepared by coprecipitation from Type S95 steel slag of Shanghai Baosteel Group as supports of ionic liquid in this paper. Five basic ionic liquids [Bmim][CH3COO], [Bmim][HCOO], [Bmim]OH, [Bmim]Br and ChOH were prepared and their catalytic performance on the synthesis of glycerol carbonate by transesterification between dimethyl carbonate and glycerol was investigated. The characterization results indicated that [Bmim]OH is the best ionic liquid (IL) for the transesterification reaction of glycerol carbonate. The hydrotalcites before and after intercalation by ionic liquid were characterized by XRD, FTIR, SEM, EDS and the IL were characterized by FT-IR, 13C-NMR and basicity determination via the Hammett method. The analysis results implied that the dispersion of [Bmim]OH in hydrotalcites reduced the alkali density appropriately and facilitated the generation of glycerol carbonate. The yield of glycerol carbonate and the conversion rate of glycerol reached 95.0% and 96.1%, respectively, when the molar ratio of dimethyl carbonate and glycerol was 3:1, the catalyst dosage was 3 wt%, the reaction temperature was 75 °C and the reaction time was 120 min. The layered structure of hydrotalcites increased the stability of ionic liquid intercalated in carriers, thus the glycerol conversion and the GC yield still remained 91.9% and 90.5% in the fifth reaction cycle.

Detoxification of sugarcane bagasse hydrolysate with different adsorbents to improve the fermentative process.

Second generation ethanol has the prospect of becoming an important bioenergy alternative. The development of this technology is associated with the lignocellulosic materials' use, with emphasis on agricultural and agroindustrial by-products from which fermentable sugar can be produced. The acid hydrolysis depolymerizes the hemicellulose releasing mainly xylose. Subsequently, the cellulose can be converted into glucose by enzymatic hydrolysis. However, the acid hydrolysis produces toxic compounds, such as furan derivatives, phenolics, and organic acids, which are harmful to fermentative microorganisms. This study investigated different acid concentrations in the sulfuric acid hydrolysis of sugarcane bagasse (1- 5% m/v) and the use of adsorbents with the prerogative to improve the acid hydrolysate (AH) quality for microbial ethanolic fermentation. Cell growth and fermentative yield of Saccharomyces cerevisiae (PE-2) and Scheffersomyces stipitis (NRRL Y-7124) were evaluated. AH was used as a source of pentoses (17.7 g L-1) and molasses (ME) sugarcane as source of hexoses (47 g L-1). The following adsorbents were used: activated charcoal, clay, hydrotalcite and active and inactive cells of PE-2 and NRRL Y-7124, at concentrations ranging (1 - 8% m/v). Results of cell growth and chemical characterization allowed to select the most effective adsorbents with emphasis for active cells that removed 66% furfural and 51% 5-(hydroxymethyl) furfural) (5-HMF) and alcoholic productivity of 23.5 g L-1 in AH and ME substrates, in the presence of mixed culture. These results indicate the application of active yeast cells in the detoxification of acid hydrolysates of the sugarcane bagasse previously to the fermentation.

First-in-human, Randomized, Double-blind Clinical Trial of Differentially Adjuvanted PAMVAC, A Vaccine Candidate to Prevent Pregnancy-associated Malaria.

BACKGROUND: Malaria in pregnancy has major impacts on mother and child health. To complement existing interventions, such as intermittent preventive treatment and use of impregnated bed nets, we developed a malaria vaccine candidate with the aim of reducing sequestration of asexual "blood-stage" parasites in the placenta, the major virulence mechanism. METHODS: The vaccine candidate PAMVAC is based on a recombinant fragment of VAR2CSA, the Plasmodium falciparum protein responsible for binding to the placenta via chondroitin sulfate A (CSA). Healthy, adult malaria-naive volunteers were immunized with 3 intramuscular injections of 20 µg (n = 9) or 50 µg (n = 27) PAMVAC, adjuvanted with Alhydrogel or glucopyranosyl lipid adjuvant in stable emulsion (GLA-SE) or in a liposomal formulation with QS21 (GLA-LSQ). Allocation was random and double blind. The vaccine was given every 4 weeks. Volunteers were observed for 6 months following last immunization. RESULTS: All PAMVAC formulations were safe and well tolerated. A total of 262 adverse events (AEs) occurred, 94 (10 grade 2 and 2 grade 3) at least possibly related to the vaccine. No serious AEs occurred. Distribution and severity of AEs were similar in all arms. PAMVAC was immunogenic in all participants. PAMVAC-specific antibody levels were highest with PAMVAC-GLA-SE. The antibodies inhibited binding of VAR2CSA expressing P. falciparum-infected erythrocytes to CSA in a standardized functional assay. CONCLUSIONS: PAMVAC formulated with Alhydrogel or GLA-based adjuvants was safe, well tolerated, and induced functionally active antibodies. Next, PAMVAC will be assessed in women before first pregnancies in an endemic area. CLINICAL TRIALS REGISTRATION: EudraCT 2015-001827-21; ClinicalTrials.gov NCT02647489.

Bio template route for fabrication of a hybrid material composed of hierarchical boehmite, layered double hydroxides (Mg-Al) and porous carbon on a steel fiber for solid phase microextraction of agrochemicals.

Nanosheets of a porous layered double hydroxide were directionally arranged on boehmite nanowires and porous carbon and used as a coating for solid-phase microextraction (SPME) method. Porous carbon tubes were prepared from goat grass and then coated with layered double hydroxide nanosheets and boehmite nanowires. The nanomaterial was placed on a stainless-steel wire which then was used for the extraction of fifteen agrochemicals from aqueous sample solutions. The extraction temperature, extraction time, ionic strength, stirring rate, and desorption temperature and time were optimized. Following thermal desorption of the agrochemicals in the injector of the gas chromatograph, they were quantified by GC/MS. Under optimum conditions, the repeatability for one fiber, expressed as relative standard deviation, was between 2.9 and 11.1%. The detection limits for the agrochemicals are between 2-29 ng L-1. The method is simple, fast, and inexpensive (in terms of equipment). The fiber is thermally stable, and the relative recoveries from spiked samples are better compared to conventional methods of extraction. Graphical abstract Schematic illustration of the preparation of three-dimensional hierarchical boehmite/ layered double hydroxides/ porous carbon (Boeh/LDH/pC) SPME fibers and application for the extraction of fifteen agrochemicals from aqueous sample solutions following quantification by GC/MS.

The Impact of Magnesium-Aluminum-Layered Double Hydroxide-Based Polyvinyl Alcohol Coated on Magnetite on the Preparation of Core-Shell Nanoparticles as a Drug Delivery Agent.

One of the current developments in drug research is the controlled release formulation of drugs, which can be released in a controlled manner at a specific target in the body. Due to the diverse physical and chemical properties of various drugs, a smart drug delivery system is highly sought after. The present study aimed to develop a novel drug delivery system using magnetite nanoparticles as the core and coated with polyvinyl alcohol (PVA), a drug 5-fluorouracil (5FU) and Mg-Al-layered double hydroxide (MLDH) for the formation of FPVA-FU-MLDH nanoparticles. The existence of the coated nanoparticles was supported by various physico-chemical analyses. In addition, the drug content, kinetics, and mechanism of drug release also were studied. 5-fluorouracil (5FU) was found to be released in a controlled manner from the nanoparticles at pH = 4.8 (representing the cancerous cellular environment) and pH = 7.4 (representing the blood environment), governed by pseudo-second-order kinetics. The cytotoxicity study revealed that the anticancer delivery system of FPVA-FU-MLDH nanoparticles showed much better anticancer activity than the free drug, 5FU, against liver cancer and HepG2 cells, and at the same time, it was found to be less toxic to the normal fibroblast 3T3 cells.

Carminic Acid Stabilized with Aluminum-Magnesium Hydroxycarbonate as New Colorant Reducing Flammability of Polymer Composites.

In this study, hybrid pigments based on carminic acid (CA) were synthesized and applied in polymer materials. Modification of aluminum-magnesium hydroxycarbonate (LH) with CA transformed the soluble chromophore into an organic-inorganic hybrid colorant. Secondary ion mass spectroscopy (TOF-SIMS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and UV-Vis spectroscopy were used to study the structure, composition, and morphology of the insoluble LH/CA colorant. Successful modification of the LH was confirmed by the presence of interactions between the LH matrix and molecules of CA. XPS analysis corroborated the presence of CA complexes with Mg2+ ions in the LH host. The batochromic shift in UV-Vis spectra of the organic-inorganic hybrid colorant was attributed to metal-dye interactions in the organic-inorganic hybrid colorants. Strong metal-dye interactions may also be responsible for the improved solvent resistance and chromostability of the modified LH. In comparison to uncolored ethylene-norbornene copolymer (EN), a modified EN sample containing LH/CA pigment showed lower heat release rate (HRR) and reduced total heat release (THR), providing the material with enhanced flame retardancy.

Dentifrice Based on Fluoride-Hydrotalcite Compounds: Characterization and Release Capacity Evaluation by Novel In Vitro Methods.

Anti-caries activity of fluoride ions is due to the protection against demineralization and the enhancement of remineralization of tooth enamel. Dentifrices available on the market contain sodium fluoride, sodium monofluorophosphate, stannous fluoride, and amine fluoride as source of these ions. A new compound working both as fluoride ion source and as abrasive was projected. Hybrids based on F- ions intercalated between the lamellae of hydrotalcite-like compounds (HTlc-F), namely MgAl-HTlc-F and ZnAl-HTlc-F, were prepared and characterized. Then, three different percentages (2, 3, and 4%) of both HTlc-F compounds were assayed. After the rheological characterization, the dentifrices containing 3 and 4% of MgAl-HTlc-F and ZnAl-HTlc-F, respectively, resulted to be the most suitable ones. Two novel in vitro methods, "rotary toothbrush method" and "manual brushing method," were developed and used in order to study the F- ions release from the prepared dentifrices. The obtained results showed that the dentifrice containing ZnAl-HTlc-F (4%) was the most effective in releasing fluoride ions. The "rotary toothbrush method" resulted to be the most suitable as the simulation of the brushing movements is standardizable and reproducible.

Label-Free, Direct Measurement of Protein Concentrations in Turbid Solutions with a UV-Visible Integrating Cavity Absorbance Spectrometer.

Protein-particle conjugates and mixtures have been investigated extensively for their diverse applications in biotechnology. However, general methods to measure protein concentration of protein-particle solutions are lacking. Typically, proteins in turbid solutions require separation or staining with another chromophore to quantitate their concentration. Here we demonstrate a label-free, direct approach to measure protein concentrations in turbid solutions using a UV-vis integrating cavity absorbance spectrometer. Three systems are used to test the ability to measure accurate protein concentrations: proteins adsorbed to Alhydrogel, proteins in solution with gold nanoparticles, and proteins encapsulated within polymeric microspheres. Protein concentrations in each of the three protein-particle systems were successfully quantified using a calibration curve created from the absorbance at 280 nm.

Characterization of a hybrid polyacrylamide and its flocculation properties in cyanide tailing suspensions.

An inorganic-organic hybrid flocculant Al(OH)3-polyacrylamide (Al-PAM) with narrow molecular weight distribution was synthesized using inverse microemulsion polymerization. The hybrid polymer Al-PAM was characterized by Infrared spectroscopy, thermogravimetric analysis, transmission electron microscopy and scanning electron microscopy, and it was found that it had a 'star-like' structure in which Al(OH)3 colloidal particles acted as cores linking PAM chains. The properties of Al-PAM were investigated in flocculating 10 wt% cyanide tailing suspensions. It was found that as the amount of Al-PAMM1 with high molecular weight and aluminum content increased, the initial settling rate of particles accelerated, achieving the maximum 6.6 m/h, 17.3 times the rate of the control without flocculants. The turbidity of the supernatant decreased to 35 ± 2 NTU accordingly, compared to 353 ± 2 NTU of that in the control, which meant that 90.0% of turbidity was removed from the cyanide tailing suspensions. The flocculation mechanism was further explored by floccule size and ζ potential measurements. The superior performance of cationic Al-PAM in flocculating negatively charged particles compared to commercial non-ionic GG indicated that electrostatic repulsion between tailing particles was a crucial factor in deciding the flocculation performance of the polymer. The study demonstrated that both charge neutralization and bridge adsorption were conductive to the particle flocculation.

Application of PAC and flocculants for improving settling of solid particles in oilfield wastewater with high salinity and Ca2.

The suspended solids in wastewater from Rekabak oilfield, Kazakhstan, were characterized and treated with flocculants to enhance settling. The wastewater contained a high concentration of total dissolved solids and calcium ion. Scanning electron microscopy and energy dispersive X-ray analyses showed that suspended solids were mainly composed of corrosion products (iron oxides) and silicon dioxide particles. Also, much salt deposition from wastewater caused a large increase in the suspended solids value. The settling of solid particles in wastewater was investigated by turbidity decrease within 60 min. The particle settling was enhanced by adding polyaluminum chloride (PAC) as coagulant and hydrolyzed polyacryamide (HPAM) or cationic polyacrylamide (CPAM) as flocculant. At optimal dose, the particle settling ability with PAC and CPAM was better than that with PAC and HPAM. Particle size analysis showed that HPAM or CPAM with high molecular weight played an important role for enlarging the particle size. The experiments with simulated wastewater showed that particle settling by using HPAM deteriorated significantly compared to that by CPAM at high calcium ion. This study provides further understanding about the effect of high salinity and Ca2+ on solids formation, flocculant performance and particle settling. Meanwhile, the results are also helpful to develop novel flocculants used for high salinity wastewater.

The impact of anionic polyacrylamide (APAM) on ultrafiltration efficiency in flocculation-ultrafiltration process.

With the purpose of improving the ultrafiltration (UF) efficiency, anionic polyacrylamide (APAM) has been used as a coagulant aid in the flocculation-UF process. In this study, the impact of APAM on UF efficiency has been investigated with regard to membrane fouling, membrane cleaning and effluent quality. The results indicated that the optimal dosage of APAM had positive impacts on membrane fouling control, membrane cleaning and effluent quality. According to the flux decline curve, scanning electron microscopy and contact angle characterization, the optimal dosage of APAM was determined to be 0.1 mg/L coupled with 2 mg/L (as Al3+) poly-aluminium chloride. Under this optimal condition, membrane fouling can be mitigated because of the formation of a porous and hydrophilic fouling layer. APAM in the fouling layer can improve the chemical cleaning efficiency of 0.5% NaOH due to the disintegration of the fouling layer when APAM is dissolved under strong alkaline conditions. Furthermore, with the addition of APAM in the flocculation-UF process, more active adsorption sites can be formed in the flocs as well as the membrane fouling layer, thus more antipyrine molecules in the raw water can be adsorbed and removed in the flocculation-UF process.

The flocculation mechanism and treatment of oily wastewater by flocculation.

In the present study, the performance of compound flocculants composed of different concentrations of polyaluminum chloride (PAC) and cationic polyacrylamide (CPAM), the influencing mechanism of the flocculation process and the effects of temperature, settling time, and speed and time of stirring were investigated. The results show that the poor water quality with high concentrations of oil, suspended solids (SS) and polymer greatly increases the oily wastewater emulsion stability and the difficulty of the flocculation treatment process. The compound flocculant in oily wastewater treatment can achieve best results at optimum conditions of temperature 45 °C, settling time 60 min, and two stirring stages, 250 r·min-1 for 3 min followed by 100 r·min-1 for 7 min. At the PAC dosage of 80 mg·L-1 and the CPAM dosage of 0.8 mg·L-1, the turbidity of oily wastewater is reduced from 153.8 NTU to 11.2 NTU, and the turbidity removal rate reaches 92.69%. Through further measurements, oil content and SS content are less than 10 mg·L-1, which meets the requirement of the Daqing oilfield re-injection standard.