Thiomorpholine Derivatives with Hypolipidemic and Antioxidant Activity.

A number of thiomorpholine derivatives that are structurally similar to some substituted morpholines possessing antioxidant and hypocholesterolemic activity were synthesized. The new compounds incorporate an antioxidant moiety as the thiomorpholine N-substituent. The derivatives were found to inhibit the ferrous/ascorbate-induced lipid peroxidation of microsomal membrane lipids, with IC50 values as low as 7.5 µΜ. In addition, these compounds demonstrate hypocholesterolemic and hypolipidemic action. The most active compound (5) decreases the triglyceride, total cholesterol, and low-density lipoprotein levels in the plasma of Triton WR-1339-induced hyperlipidemic rats, by 80, 78, and 76%, respectively, at 56 mmol/kg (i.p.). They may also act as squalene synthase inhibitors. The above results indicate that the new molecules may be useful as leads for the design of novel compounds as potentially antiatherogenic factors.

Bacterial resistance to antisense peptide phosphorodiamidate morpholino oligomers.

Peptide phosphorodiamidate morpholino oligomers (PPMOs) are synthetic DNA mimics that bind cRNA and inhibit bacterial gene expression. The PPMO (RFF)(3)RXB-AcpP (where R is arginine, F, phenylalanine, X is 6-aminohexanoic acid, B is ß-alanine, and AcpP is acyl carrier protein) is complementary to 11 bases of the essential gene acpP (which encodes acyl carrier protein). The MIC of (RFF)(3)RXB-AcpP was 2.5 µM (14 µg/ml) in Escherichia coli W3110. The rate of spontaneous resistance of E. coli to (RFF)(3)RXB-AcpP was 4 × 10(-7) mutations/cell division. A spontaneous (RFF)(3)RXB-AcpP-resistant mutant (PR200.1) was isolated. The MIC of (RFF)(3)RXB-AcpP was 40 µM (224 µg/ml) for PR200.1. The MICs of standard antibiotics for PR200.1 and W3110 were identical. The sequence of acpP was identical in PR200.1 and W3110. PR200.1 was also resistant to other PPMOs conjugated to (RFF)(3)RXB or peptides with a similar composition or pattern of cationic and nonpolar residues. Genomic sequencing of PR200.1 identified a mutation in sbmA, which encodes an active transport protein. In separate experiments, a (RFF)(3)RXB-AcpP-resistant isolate (RR3) was selected from a transposome library, and the insertion was mapped to sbmA. Genetic complementation of PR200.1 or RR3 with sbmA restored susceptibility to (RFF)(3)RXB-AcpP. Deletion of sbmA caused resistance to (RFF)(3)RXB-AcpP. We conclude that resistance to (RFF)(3)RXB-AcpP was linked to the peptide and not the phosphorodiamidate morpholino oligomer, dependent on the composition or repeating pattern of amino acids, and caused by mutations in sbmA. The data further suggest that (RFF)(3)R-XB PPMOs may be transported across the plasma membrane by SbmA.

Polymer-Assisted Synthesis of Single and Fused Diketomorpholines.

The synthesis of different diketomorpholines via N-acyl-3,4-dihydro-2 H-1,4-oxazine-3-carboxylic acids is reported in this article. The key intermediates were prepared using a convenient solid-phase synthesis starting from polymer-supported Ser( tBu)-OH. After subsequent sulfonylation with 4-nitrobenzenesulfonyl chloride (4-Nos-Cl), alkylation with an α-bromoketone, cleavage of the 4-Nos group and acylation with an α-halocarboxylic acids, acid-mediated cleavage from the resin yielded dihydrooxazine-3-carboxylic acids in high crude purities. Depending on the reaction conditions, exposure to base resulted in cyclization to either oxazino[3,4- c][1,4]oxazine-diones or 3-methylidenemorpholine-2,5-diones. Further reaction with triethylsilane-trifluoroacetic acid (TES/TFA) led to olefin reduction, in the case of oxazino[3,4- c][1,4]oxazine-dione with full control of the newly formed stereocenter.

Stereoselective Polymer-Supported Synthesis of Morpholine- and Thiomorpholine-3-carboxylic Acid Derivatives.

Herein we report the polymer-supported synthesis of 3,4-dihydro-2H-1,4-oxazine-3-carboxylic acid derivatives using immobilized Fmoc-Ser(tBu)-OH and Fmoc-Thr(tBu)-OH as the starting materials. After the solid-phase-synthesis of N-alkyl-N-sulfonyl/acyl intermediates, the target dihydrooxazines were obtained using trifluoroacetic acid-mediated cleavage from the resin. This approach was also studied for the preparation of dihydrothiazines from immobilized Fmoc-Cys(Trt)-OH. Inclusion of triethylsilane in the cleavage cocktail resulted in the stereoselective formation of the corresponding morpholine/thiomorpholine-3-carboxylic acids. Stereochemical studies revealed the specific configuration of the newly formed stereocenter and also the formation of stable N-acylmorpholine rotamers.

Enantioselective determination of a gastroprokinetic drug using amylose tris-(3,5-dimethylphenylcarbamate) as a stationary phase by HPLC.

An enantioselective high-performance liquid chromatographic method for determination of enantiomers of mosapride citrate in bulk drugs and pharmaceuticals using UV-vis and polarimetric detectors in series has been developed. Baseline separation with resolution >2.0 was achieved on a column containing amylose tris-(3,5-dimethylphenylcarbamate) as stationary phase using a mobile phase consisting of n-hexane:ethanol:triethylamine (80:20:0.3, v/v/v) at 40 degrees C. The detection was carried out at UV-276 nm and enantiomers were identified by polarimetric detector. The effect of ethanol, 2-propanol, TEA, temperature and mobile phase flow rate on separation of MSP enantiomers was studied and the method was validated with respect to accuracy, precision, linearity and limits of detection and quantification. The linearity of the method was studied between 6.25 and 50 microg/ml and r2 was >0.9997. The recoveries were in the range 99.63-100.22%, the method was suitable not only for process development of mosapride citrate but also for quality assurance of the individual enantiomers in bulk drugs and pharmaceuticals.

Cytosolic delivery of macromolecules. II. Mechanistic studies with pH-sensitive morpholine lipids.

Drug carriers containing weak acids or bases can promote cytosolic delivery of macromolecules by exploiting the acidic pH of the endosome. We have prepared two pH-sensitive mono-stearoyl derivatives of morpholine, one with a (2-hydroxy) propylene (ML1) linker and the other, an ethylene (ML2) linker. The pK(a) values of lipids ML1 and ML2, when incorporated into liposomes, are 6.12 and 5.91, respectively. Both lipids disrupt human erythrocytes at pH equal to or below their pK(a) but show no such activity at pH 7.4. Confocal microscopy studies suggest partial endosome-to-cytosol transfer of fluorescent dextran (MW 10 kDa) encapsulated in liposomes that contained 20 mol% of morpholine lipids. Interestingly, co-incubation of morpholine lipids in free or micellar form (without liposomal incorporation) with dextran resulted in efficient cytosolic delivery. Upon acidification to the endosomal pH, liposomes containing ML1 revealed: (a). leakage of entrapped solute that is independent of solute size; (b). lack of liposomal collapse into micelles as evidenced by photon correlation spectroscopy and UV light scattering; and (c). minimal inter-bilayer interactions as shown in a fluorescence resonance energy transfer assay. These observations are consistent with progressive intravesicular reorganization of lipids into stable liposomes of smaller size, but of more homogeneous distribution, upon acidification. The results emphasize a need to manipulate liposomal formulations containing ML1 such that ML1 will promote catastrophic collapse of liposomes to mixed micelles upon exposure to acidic pH. It is only then that micelle-mediated permeabilization of the endosomal membrane will lead to efficient cytosolic delivery of macromolecules originally loaded in liposomes.

Effect of the molecular architecture on the thermosensitive properties of chitosan-g-poly(N-vinylcaprolactam).

A series of thermoresponsive copolymers based on chitosan-g-poly(N-vinylcaprolactam) were synthesized by amidation reaction using 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride as coupling reagent. The effect of molecular architecture on the thermoresponsive properties of the graft copolymers solutions was studied by varying the chain length of the grafted poly(N-vinylcaprolactam), PVCL, (in the range from 4 to 26 kDa) and the spacing between grafted chains onto the chitosan backbone. The most interesting characteristic of these copolymers is their solubility in water at temperatures below their lower critical solution temperature (LCST). These solutions presented a LCST between 36 and 44 °C, which decreases with the spacing and length of grafted PVCL chains onto the chitosan backbone, in contrast with the limited decrease of the LCST of PVCL above a critical M¯n value around 18 kDa. This behavior offers tangible possibilities for the preparation and application of sensitive bioactive formulations and "smart" drug delivery systems.

New synthetic amphiphilic polymers for steric protection of liposomes in vivo.

Carboxy group-terminated synthetic polymers--branched poly(ethylene glycol), poly(acryloylmorpholine), and poly(vinylpyrrolidone)--were made amphiphilic by derivatization with phosphatidyl ethanolamine via the terminal carboxy group and then incorporated into lecithin-cholesterol liposomes prepared by the detergent dialysis method. Following the biodistribution of liposomes in mice, all three polymers were shown to be effective steric protectors for liposomes and were able to sharply increase liposome circulation times in a concentration-dependent manner. The accumulation of liposomes in the liver decreases. The effects observed are similar to those found for liposomes modified with linear poly(ethylene glycol). At low polymer concentration, amphiphilic branched poly(ethylene glycol) seems to be the most effective liposome protector, most probably, because at the same molar content of anchoring groups, each attachment point carries two polymeric chains and doubles the quantity of liposome-grafted polymer comparing to linear poly(ethylene glycol).

Pharmacokinetics in mice of four oligomer-conjugated polymers for amplification targeting.

UNLABELLED: For use in amplification targeting, an oligomer-conjugated polymer must display adaptable chemistry, minimal steric hindrance, low toxicity, and favorable pharmacokinetics. In particular, the polymer must remain in circulation sufficiently long to permit target localization. OBJECTIVES: To evaluate their properties for amplification targeting, the biodistribution in normal mice was determined for four polymers conjugated with multiple copies of a phosphorodiamidate morpholino (MORF) oligomer. METHODS: An amine-derivatized 25-mer MORF oligomer was radiolabeled with 99mTc. Three polymers of succinylated polylysine (PL) with initial weight average molecular weights (Mw) of 30, 100, and 200 KDa, and one poly (methyl vinyl ether-alt-maleic acid) (PA) with initial Mw of 45 KDa polymer, were each conjugated with an amine derivatized 25-mer complementary MORF (i.e., cMORF). The average number of attached cMORF groups on each polymer molecule (i.e., gpm) was estimated by a high performance liquid chromatography (HPLC) shift assay after the addition of trace 99mTc-MORF to the unpurified polymer, while the average number of accessible cMORF on each polymer was determined by adding radiolabeled MORF at increasing concentrations to the purified cMORF polymer solution until saturation. After purification, each polymer was radiolabeled by incubation with trace 99mTc-MORF. The biodistribution was then established in normal CD1 mice at a constant dosage of 2-4 micrograms of cMORF. RESULTS: The gpm varied from about 12 on 30 KDa PL to 40 on 45 KDa PA. The biodistribution results show that the pharmacokinetics of the radiolabel is a function of both the type of polymer as well as its gpm. Of the four polymers, the 30 KDa PL showed the most favorable pharmacokinetic profile, with the lowest liver accumulation and the highest blood values compared to the remaining three polymers. CONCLUSION: The biodistribution of the four polymers showed characteristic differences, with one polymer (30 KDa PL) showing the most favorable properties for amplification targeting.

PAcM-AN: poly (N-acryloylmorpholine)-conjugated antisense oligonucleotides.

A new amphiphilic, high-molecular weight poly (N-acryloylmorpholine) (PAcM) polymer has been used to be linked to oligonucleotide chains through a liquid-phase stepwise synthesis. This new conjugate has been investigated for its melting property, nuclease stability and capacity to elicit RNase H activity. Its antisense activity against an HIV-1 target has been also evaluated.

Biological evaluation of degradable, stimuli-sensitive multiblock copolymers having polydepsipeptide- and poly(ε-caprolactone) segments in vitro.

Polydepsipeptides, alternating copolymers consisting of α-amino acids and α-hydroxy acids, are degradable polymers. Depsipeptide-based polymers of varied architectures can be synthesized via ring-opening polymerization of various morpholine-2,5-dione derivatives. Thermoplastic phase-segregated multiblock copolymers with poly(ε-caprolactone) (PCL) and poly(iso-butyl-morpholinedione) segments have been synthesized from the macrodiols and an aliphatic diisocyanate as a coupling agent. The respective multiblock copolymers showed shape-memory capabilities and good elastic properties, making them attractive candidates for potential application as biomaterials for controlled drug release systems, scaffolds to be applied in tissue engineering or biofunctional implants. Thus, these abilities cumulate to form multifunctional materials, combining degradability with shape-memory capability. The advantages of depsipeptide-based multiblock copolymers compared to previously reported poly(ether)ester-derived biomaterials having shape-memory property may result from their different degradation products, as the resulting α-amino acids may act as a buffer for the hydroxy acids, thereby stabilizing pH values. In this context, we report on the biological evaluation of material samples in accordance with international standards (EN DIN ISO 10993-5 and 10993-12). Here, extracts of the substrates were exposed to a continuous fibroblast like cell line (L929) to study cytocompatibility of extractable substrates. Cell viability, morphology, LDH-release (as a parameter for the functional integrity of the cell membrane), activity of the mitochondrial dehydrogenases (as a parameter of the cell activity) and assembly of the actin- and vinculin cytoskeleton indicated no incompatibilities between the extracts and L929 cells. These results suggest that depsipeptide-based multiblock copolymers are promising candidates for soft, multifunctional implant materials.

Versatile precursors of functional RAFT agents. Application to the synthesis of bio-related end-functionalized polymers.

Biomolecule-polymer conjugates are widely used in bio-related fields, but their synthesis is often tricky, especially the introduction of a single biomolecule at one chain end. This paper describes a new straightforward approach to prepare such conjugates via RAFT polymerization. By designing appropriate bio-related RAFT agents, polymer chains of controlled chain length (Mn = 10 000-40 000 and PDI < 1.1) carrying a single biomolecule as an alpha-end group (a sugar or a biotin) linked by a stable amide bond are obtained. Considering the versatility of the RAFT process, this strategy appears to be very attractive for the design of a variety of conjugates.

Solid phase organic synthesis (SPOS): a novel route to diketopiperazines and diketomorpholines.

The solid phase synthesis of libraries containing a 1,3,4,6-tetrasubstituted-2,5-diketo-1,4-piperazine scaffold (DKP) or a 3,4,6-trisubstituted-2,5-diketo-1,4-morpholine scaffold (DKM) from alpha-bromocarboxylic acids and amines is described. Using a design strategy which we refer to as divergent library design, both templates were prepared from a common intermediate. The general utility of this synthetic route in creating novel, non-peptidyl chemical libraries is discussed.