High-frequency and intrinsically stretchable polymer diodes.

Skin-like intrinsically stretchable soft electronic devices are essential to realize next-generation remote and preventative medicine for advanced personal healthcare1-4. The recent development of intrinsically stretchable conductors and semiconductors has enabled highly mechanically robust and skin-conformable electronic circuits or optoelectronic devices2,5-10. However, their operating frequencies have been limited to less than 100 hertz, which is much lower than that required for many applications. Here we report intrinsically stretchable diodes-based on stretchable organic and nanomaterials-capable of operating at a frequency as high as 13.56 megahertz. This operating frequency is high enough for the wireless operation of soft sensors and electrochromic display pixels using radiofrequency identification in which the base-carrier frequency is 6.78 megahertz or 13.56 megahertz. This was achieved through a combination of rational material design and device engineering. Specifically, we developed a stretchable anode, cathode, semiconductor and current collector that can satisfy the strict requirements for high-frequency operation. Finally, we show the operational feasibility of our diode by integrating it with a stretchable sensor, electrochromic display pixel and antenna to realize a stretchable wireless tag. This work is an important step towards enabling enhanced functionalities and capabilities for skin-like wearable electronics.

Structure of Geobacter pili reveals secretory rather than nanowire behaviour.

Extracellular electron transfer by Geobacter species through surface appendages known as microbial nanowires1 is important in a range of globally important environmental phenomena2, as well as for applications in bio-remediation, bioenergy, biofuels and bioelectronics. Since 2005, these nanowires have been thought to be type 4 pili composed solely of the PilA-N protein1. However, previous structural analyses have demonstrated that, during extracellular electron transfer, cells do not produce pili but rather nanowires made up of the cytochromes OmcS2,3 and OmcZ4. Here we show that Geobacter sulfurreducens binds PilA-N to PilA-C to assemble heterodimeric pili, which remain periplasmic under nanowire-producing conditions that require extracellular electron transfer5. Cryo-electron microscopy revealed that C-terminal residues of PilA-N stabilize its copolymerization with PilA-C (to form PilA-N-C) through electrostatic and hydrophobic interactions that position PilA-C along the outer surface of the filament. PilA-N-C filaments lack π-stacking of aromatic side chains and show a conductivity that is 20,000-fold lower than that of OmcZ nanowires. In contrast with surface-displayed type 4 pili, PilA-N-C filaments show structure, function and localization akin to those of type 2 secretion pseudopili6. The secretion of OmcS and OmcZ nanowires is lost when pilA-N is deleted and restored when PilA-N-C filaments are reconstituted. The substitution of pilA-N with the type 4 pili of other microorganisms also causes a loss of secretion of OmcZ nanowires. As all major phyla of prokaryotes use systems similar to type 4 pili, this nanowire translocation machinery may have a widespread effect in identifying the evolution and prevalence of diverse electron-transferring microorganisms and in determining nanowire assembly architecture for designing synthetic protein nanowires.

A Zinc Oxide Nanowire-Modified Mineralized Collagen Scaffold Promotes Infectious Bone Regeneration.

Bone infection poses a major clinical challenge that can hinder patient recovery and exacerbate postoperative complications. This study has developed a bioactive composite scaffold through the co-assembly and intrafibrillar mineralization of collagen fibrils and zinc oxide (ZnO) nanowires (IMC/ZnO). The IMC/ZnO exhibits bone-like hierarchical structures and enhances capabilities for osteogenesis, antibacterial activity, and bacteria-infected bone healing. During co-cultivation with human bone marrow mesenchymal stem cells (BMMSCs), the IMC/ZnO improves BMMSC adhesion, proliferation, and osteogenic differentiation even under inflammatory conditions. Moreover, it suppresses the activity of Gram-negative Porphyromonas gingivalis and Gram-positive Streptococcus mutans by releasing zinc ions within the acidic infectious microenvironment. In vivo, the IMC/ZnO enables near-complete healing of infected bone defects within the intricate oral bacterial milieu, which is attributed to IMC/ZnO orchestrating M2 macrophage polarization, and fostering an osteogenic and anti-inflammatory microenvironment. Overall, these findings demonstrate the promise of the bioactive scaffold IMC/ZnO for treating bacteria-infected bone defects.

Electroactive polymer tag modified nanosensors for enhanced intracellular ATP detection.

ATP plays a crucial role in cell energy supply, so the quantification of intracellular ATP levels is particularly important for understanding many physio-pathological processes. The intracellular quantification of this non-electroactive molecule can be realized using aptamer-modified nanoelectrodes, but is hindered by the limited quantity of modification and electroactive tags on the nanosized electrodes. Herein, we developed a simple but effective electrochemical signal amplification strategy for intracellular ATP detection, which replaces the regular ATP aptamer-linked ferrocene monomer with a polymer, thus greatly magnifying the amounts of electrochemical reporters linked to one chain of the aptamer and enhancing the signals. This ferrocene polymer-ATP aptamer was further immobilized onto Au nanowire electrodes (SiC@C@Au NWEs) to achieve accurate quantification of intracellular ATP in single cells, presenting high electrochemical signal output and high specificity. This work not only provides a powerful tool for quantifying intracellular ATP but also offers a simple and versatile strategy for electrochemical signal amplification in the detection of broader non-electroactive molecules involved in different kinds of intracellular physiological processes.

Silver nanowires/waterborne polyurethane composite film based piezoresistive pressure sensor for ultrasensitive human motion monitoring.

Flexible piezoresistive pressure sensors are gaining significant attention, particularly in the realm of flexible wearable electronic skin. Here, a flexible piezoresistive pressure sensor was developed with a broad sensing range and high sensitivity. We achieved this by curing polydimethylsiloxane (PDMS) on sandpaper, creating a PDMS film as the template with a micro-protrusion structure. The core sensing layer was formed using a composite of silver nanowires (AgNWs) and waterborne polyurethane (WPU) with a similar micro-protrusion structure. The sensor stands out with its exceptional sensitivity, showing a value of 1.04 × 106kPa-1with a wide linear range from 0 to 27 kPa. It also boasts a swift response and recovery time of 160 ms, coupled with a low detection threshold of 17 Pa. Even after undergoing more than 1000 cycles, the sensor continues to deliver stable performance. The flexible piezoresistive pressure sensor based on AgNWs/WPU composite film (AWCF) can detect small pressure changes such as pulse, swallowing, etc, which indicates that the sensor has great application potential in monitoring human movement and flexible wearable electronic skin.

Enhanced osteogenic and antibacterial properties of titanium implant surface modified with Zn-incorporated nanowires: Preclinical in vitro and in vivo investigations.

OBJECTIVE: This study aimed to synthesize zinc-incorporated nanowires structure modified titanium implant surface (Zn-NW-Ti) and explore its superior osteogenic and antibacterial properties in vitro and in vivo. MATERIALS AND METHODS: Zn-NW-Ti was synthesized via displacement reactions between zinc sulfate solutions and the titanium (Ti) surface, which was pretreated by hydrofluoric acid etching and hyperthermal alkalinization. The physicochemical properties of the Zn-NW-Ti surface were examined. Moreover, the biological effects of Zn-NW-Ti on MC3T3-E1 cells and its antibacterial property against oral pathogenic bacteria (Staphylococcus aureus, Porphyromonas gingivalis, and Actinobacillus actinomycetemcomitans) compared with sandblasted and acid-etched Ti (SLA-Ti) and nanowires modified Ti (NW-Ti) surface were assessed. Zn-NW-Ti and SLA-Ti modified implants were inserted into the anterior extraction socket of the rabbit mandible with or without exposure to the mixed bacterial solution (S. aureus, P. gingivalis, and A. actinomycetemcomitans) to investigate the osteointegration and antibacterial performance via radiographic and histomorphometric analysis. RESULTS: The Zn-NW-Ti surface was successfully prepared. The resultant titanium surface appeared as a nanowires structure with hydrophilicity, from which zinc ions were released in an effective concentration range. The Zn-NW-Ti surface performed better in facilitating the adhesion, proliferation, and differentiation of MC3T3-E1 cells while inhibiting the colonization of bacteria compared with SLA-Ti and NW-Ti surface. The Zn-NW-Ti implant exhibited enhanced osseointegration in vivo, which was attributed to increased osteogenic activity and reduced bacterial-induced inflammation compared with the SLA-Ti implant. CONCLUSIONS: The Zn-incorporated nanowires structure modified titanium implant surface exhibited improvements in osteogenic and antibacterial properties, which optimized osteointegration in comparison with SLA titanium implant surface.

One-Stop Strategy for Obtaining Controllable Sensitivity and Feasible Self-Patterning in Silver Nanowires/Elastomer Nanocomposite-Based Stretchable Ultrathin Strain Sensors.

In this study, selective photo-oxidation (SPO) is proposed as a simple, fast, and scalable one-stop strategy that enables simultaneous self-patterning and sensitivity adjustment of ultrathin stretchable strain sensors. The SPO of an elastic substrate through irradiation time-controlled ultraviolet treatment in a confined region enables precise tuning of both the surface energy and the elastic modulus. SPO induces the hydrophilization of the substrate, thereby allowing the self-patterning of silver nanowires (AgNWs). In addition, it promotes the formation of nonpermanent microcracks of AgNWs/elastomer nanocomposites under the action of strain by increasing the elastic modulus. This effect improves sensor sensitivity by suppressing the charge transport pathway. Consequently, AgNWs are directly patterned with a width of 100 µm or less on the elastic substrate, and AgNWs/elastomer-based ultrathin and stretchable strain sensors with controlled sensitivity work reliably in various operating frequencies and cyclic stretching. Sensitivity-controlled strain sensors successfully detect both small and large movements of the human hand.

Abiotic tooth enamel.

Tooth enamel comprises parallel microscale and nanoscale ceramic columns or prisms interlaced with a soft protein matrix. This structural motif is unusually consistent across all species from all geological eras. Such invariability-especially when juxtaposed with the diversity of other tissues-suggests the existence of a functional basis. Here we performed ex vivo replication of enamel-inspired columnar nanocomposites by sequential growth of zinc oxide nanowire carpets followed by layer-by-layer deposition of a polymeric matrix around these. We show that the mechanical properties of these nanocomposites, including hardness, are comparable to those of enamel despite the nanocomposites having a smaller hard-phase content. Our abiotic enamels have viscoelastic figures of merit (VFOM) and weight-adjusted VFOM that are similar to, or higher than, those of natural tooth enamels-we achieve values that exceed the traditional materials limits of 0.6 and 0.8, respectively. VFOM values describe resistance to vibrational damage, and our columnar composites demonstrate that light-weight materials of unusually high resistance to structural damage from shocks, environmental vibrations and oscillatory stress can be made using biomimetic design. The previously inaccessible combinations of high stiffness, damping and light weight that we achieve in these layer-by-layer composites are attributed to efficient energy dissipation in the interfacial portion of the organic phase. The in vivo contribution of this interfacial portion to macroscale deformations along the tooth's normal is maximized when the architecture is columnar, suggesting an evolutionary advantage of the columnar motif in the enamel of living species. We expect our findings to apply to all columnar composites and to lead to the development of high-performance load-bearing materials.

A Dielectric Polymer/Metal Oxide Nanowire Composite for Self-Adaptive Charge Release.

Electrostatic discharge is a fatal threat to a variety of electronic products. Here we report on a polymer nanocomposite composed of a dielectric polymer embedded with aligned core-shell structured nanowires for highly efficient distributed electrostatic discharge protection. The dielectric nanocomposite is capable of self-adaptive charge release, stemming from the nonlinear interface built in the Bi/Co oxide coated ZnO nanowires that leads to a "hand-in-hand" double-Schottky barrier. The ultralow filler concentration (e.g., 0.5 vol %) endows the nanocomposite with low permittivity (close to the pristine polymer matrix) and high optical transmittance (75%) in the visible light wavelength range, which is desirable in packaging materials and display coatings for portable electronics. The effectiveness for electrostatic discharge protection was validated with an organic light-emitting diode screen protected by the nanocomposite that survived multiple rounds of electrostatic discharge.

Polypyrrole-Silicon Nanowire Arrays for Controlled Intracellular Cargo Delivery.

Intracellular cargo delivery is a critical and challenging step in controlling cell states. Silicon nanowire (NW) arrays have emerged as a powerful platform for accessing the intracellular space through a combination of their nanoscale dimensions and electrical properties. Here, we develop and characterize a conductive polypyrrole (PPy)-NW device for temporally controlled intracellular delivery. Fluorescent cargos, doped in electroresponsive PPy matrices at wire tips as well as entire NW arrays, are released with an applied reducing potential. Intracellular delivery into endothelial cells from PPy-Si substrates demonstrated comparable kinetics to solution-based delivery methods while requiring an order of magnitude less cargo loading. This hybrid polymer-semiconductor platform extends methods available for intracellular delivery and links electrical signaling from artificial systems with living molecular transduction.

Enhanced Antibacterial Ability of Electrospun PCL Scaffolds Incorporating ZnO Nanowires.

The infection of implanted biomaterial scaffolds presents a major challenge. Existing therapeutic solutions, such as antibiotic treatment and silver nanoparticle-containing scaffolds are becoming increasingly impractical because of the growth of antibiotic resistance and the toxicity of silver nanoparticles. We present here a novel concept to overcome these limitations, an electrospun polycaprolactone (PCL) scaffold functionalised with zinc oxide nanowires (ZnO NWs). This study assessed the antibacterial capabilities and biocompatibility of PCL/ZnO scaffolds. The fabricated scaffolds were characterised by SEM and EDX, which showed that the ZnO NWs were successfully incorporated and distributed in the electrospun PCL scaffolds. The antibacterial properties were investigated by co-culturing PCL/ZnO scaffolds with Staphylococcus aureus. Bacterial colonisation was reduced to 51.3% compared to a PCL-only scaffold. The biocompatibility of the PCL/ZnO scaffolds was assessed by culturing them with HaCaT cells. The PCL scaffolds exhibited no changes in cell metabolic activity with the addition of the ZnO nanowires. The antibacterial and biocompatibility properties make PCL/ZnO a good choice for implanted scaffolds, and this work lays a foundation for ZnO NWs-infused PCL scaffolds in the potential clinical application of tissue engineering.

Versatile Inorganic Subnanometer Nanowire Adhesive.

Adhesives are applied extensively in daily life and industries, and people have developed numerous commercial polymeric adhesives. However, in most cases, these adhesives work on dry surfaces in air and form permanent bonds with the substrates, limiting the applications of adhesives. Inspired by the innate adhesive functions of some animals, such as geckos, spiders, mussels, and clingfish, scientists have developed various adhesive compositions and structures to meet various conditions. Here, we show a versatile subnanometer nanowire (SNW) adhesive with high strength and great reversibility, which could be prepared at a large scale through a facile room-temperature reaction. The SNW adhesive contacts the substrates at multiple sites due to the ultrahigh flexibility, and meanwhile, the multilevel interactions among the SNWs endow them with strong cohesion, so they exhibit good adhesive performance. This adhesive is applicable to various substrates, such as metals, polymers, and glass, and not only possesses good stability at room temperature in air but also is suitable for underwater environments and ultralow temperatures. Moreover, this adhesive could be easily recycled and removed from the substrates without any residue and damage. The SNW adhesive not only inspires the design of hierarchical adhesive structures with new contact modes but also has potential for practical applications.

Interfacial Assembly of Nanowire Arrays toward Carbonaceous Mesoporous Nanorods and Superstructures.

Synthesis of anisotropic carbonaceous nano- and micro-materials with well-ordered mesoporous structures has attracted increasing attention for a broad scope of applications. Although hard-templating method has been widely employed, overcoming the viscous forces to prepare anisotropic mesoporous materials is particularly challenging via the universal soft-templating method, especially from sustainable biomass as a carbon resource. Herein, the synthesis of biomass-derived nanowire-arrays based mesoporous nanorods and teeth-like superstructures is reported, through a simple and straightforward polyelectrolyte assisted soft-templating hydrothermal carbonization (HTC) approach. A surface energy induced interfacial assembly mechanism with the synergetic interactions between micelles, nanowire, nanorods, and polyelectrolyte is proposed. The polyelectrolyte acts not only as a stabilizer to decrease the surface energy of cylindrical micelles, nanowires and nanorods, but also as a structure-directing agent to regulate the oriented attachment and anisotropic assembly of micelles, nanowires, and nanorods. After a calcination treatment, the carbon nanorod and teeth-like superstructure are successfully coupled with Ru to directly produce supported catalysts for the hydrogen evolution reaction, exhibiting much better performance than the isotropic nanospheres based catalyst. This HTC approach will open up new avenues for the synthesis of anisotropic materials with various morphologies and dimensions, expanding the palette of materials selection for many applications.

Electrochemical Actuators with Multicolor Changes and Multidirectional Actuation.

Electrochemical (EC) actuators have garnered significant attention in recent years, yet there are still some critical challenges to limit their application range, such as responsive time, multifunctionality, and actuating direction. Herein, an EC actuator with a back-to-back structure is fabricated by stacking two membranes with bilayer V2 O5 nanowires/single-walled carbon nanotubes (V2 O5 NWs/SWCNTs) networks, and shows a synchronous high actuation amplitude (about ±9.7 mm, ±28.4°) and multiple color changes. In this back-to-back structure, the inactive SWCNTs layer is used as a conductive current collector, and the bilayer network is attached to a porous polymer membrane. The dual-responsive processes of V2 O5 nanowires (V2 O5 NWs) actuation films and actuators are also deeply investigated through in situ EC X-ray diffraction and Raman spectroscopy. The results show that the EC actuation of the V2 O5 NWs/SWCNTs film is highly related to the redox behavior of the pseudocapacitive V2 O5 NWs layer. At last, both V2 O5 NWs and W18 O49 nanowires (W18 O49 NWs)-based EC actuators are constructed to demonstrate the multicolor changes and multidirectional actuation induced by the opposite lattice changes of V2 O5 NWs and W18 O49 NWs during ionic de-/intercalation, guiding the design of multifunctional EC actuators in the future.

In-situelectrochemical fabrication of Ag@AgCl NW-PET film with superior photocatalytic bactericidal activity.

Constructing a composite photocatalyst with efficient charge-transfer pathways is contribute to improving charge separation, which has attracted wide attention owing to its availability in photocatalysis applications. In this work, three-dimensional (3D) silver@silver chloride (Ag@AgCl) network structures are fabricated for photocatalytic inactivation ofEscherichia coli(E. coli) by thein situelectrochemical introducing AgCl shell on the surface of Ag nanowire (NW) networks that are coated on a polyethylene terephthalate (PET) substrate. The obtained Ag@AgCl NW-PET films exhibit good photocatalytic bactericidal activity againstE. coliunder simulated Sunlight irradiation, mainly due to their efficient charge-transport channel constructed by the Ag NWs network. It is worth noting that the content of converted AgCl shell is positively correlated with their photocatalytic bactericidal efficiency. The experimental results also demonstrate that the synergistic contribution of Ag+sustained release, rough surfaces and energy band structure optimization in photocatalytic sterilization. Besides, the prepared Ag@AgCl NW-PET film can be recycled, and the photocatalytic sterilization efficiency can still keep above 99% after three cycles. This work might provide new and more diverse opportunities for the development of excellent charge-transport, recyclable photocatalysts for photocatalytic sterilization.

Identification of Trace Polystyrene Nanoplastics Down to 50 nm by the Hyphenated Method of Filtration and Surface-Enhanced Raman Spectroscopy Based on Silver Nanowire Membranes.

Nanoplastics are emerging pollutants that pose potential threats to the environment and organisms. However, in-depth research on nanoplastics has been hindered by the absence of feasible and reliable analytical methods, particularly for trace nanoplastics. Herein, we propose a hyphenated method involving membrane filtration and surface-enhanced Raman spectroscopy (SERS) to analyze trace nanoplastics in water. In this method, a bifunctional Ag nanowire membrane was employed to enrich nanoplastics and enhance their Raman spectra in situ, which omitted sample transfer and avoided losing smaller nanoplastics. Good retention rates (86.7% for 50 nm and approximately 95.0% for 100-1000 nm) and high sensitivity (down to 10-7 g/L for 50-1000 nm and up to 105 SERS enhancement factor) of standard polystyrene (PS) nanoplastics were achieved using the proposed method. PS nanoplastics with concentrations from 10-1 to 10-7 g/L and sizes ranging from 50 to 1000 nm were successfully detected by Raman mapping. Moreover, PS micro- and nanoplastics in environmental water samples collected from the seafood market were also detected at the µg/L level. Consequently, the proposed method provides more possibilities for analyzing low-concentration nanoplastics in aquatic environments with high enrichment efficiency, minimal sample loss, and high sensitivity.

Selenium Nanowire Formation by Reacting Selenate with Magnetite.

The mobility of 79Se, a fission product of 235U and long-lived radioisotope, is an important parameter in the safety assessment of radioactive nuclear waste disposal systems. Nonradioactive selenium is also an important contaminant of drainage waters from black shale mountains and coal mines. Highly mobile and soluble in its high oxidation states, selenate (Se(VI)O42-) and selenite (Se(IV)O32-) oxyanions can interact with magnetite, a mineral present in anoxic natural environments and in steel corrosion products, thereby being reduced and consequently immobilized by forming low-solubility solids. Here, we investigated the sorption and reduction capacity of synthetic nanomagnetite toward Se(VI) at neutral and acidic pH, under reducing, oxygen-free conditions. The additional presence of Fe(II)aq, released during magnetite dissolution at pH 5, has an effect on the reduction kinetics. X-ray absorption spectroscopy analyses revealed that, at pH 5, trigonal gray Se(0) formed and that sorbed Se(IV) complexes remained on the nanoparticle surface during longer reaction times. The Se(0) nanowires grew during the reaction, which points to a complex transport mechanism of reduced species or to active reduction sites at the tip of the Se(0) nanowires. The concomitant uptake of aqueous Fe(II) and Se(VI) ions is interpreted as a consequence of small pH oscillations that result from the Se(VI) reduction, leading to a re-adsorption of aqueous Fe(II) onto the magnetite, renewing its reducing capacity. This effect is not observed at pH 7, where we observed only the formation of Se(0) with slow kinetics due to the formation of an oxidized maghemite layer. This indicates that the presence of aqueous Fe(II) may be an important factor to be considered when examining the environmental reactivity of magnetite.

Multimode Time-Resolved Superresolution Microscopy Revealing Chain Packing and Anisotropic Single Carrier Transport in Conjugated Polymer Nanowires.

Here, we developed a novel, multimode superresolution method to perform full-scale structural mapping and measure the energy landscape for single carrier transport along conjugated polymer nanowires. Through quenching of the local emission, the motion of a single photogenerated hole was tracked using blinking-assisted localization microscopy. Then, utilizing binding and unbinding dynamics of quenchers onto the nanowires, local emission spectra were collected sequentially and assembled to create a superresolution map of emission sites throughout the structure. The hole polaron trajectories were overlaid with the superresolution maps to correlate structures with charge transport properties. Using this method, we compared the efficiency of inter- and intrachain hole transport inside the nanowires and for the first time directly measured the depth of carrier traps originated from torsional disorder and chemical defects.

Laser-Processed PEN with Au Nanowires Array: A Biocompatibility Assessment.

Although many noble metals are known for their antibacterial properties against the most common pathogens, such as Escherichia coli and Staphylococcus epidermidis, their effect on healthy cells can be toxic. For this reason, the choice of metals that preserve the antibacterial effect while being biocompatible with health cells is very important. This work aims to validate the effect of gold on the biocompatibility of Au/Ag nanowires, as assessed in our previous study. Polyethylene naphthalate (PEN) was treated with a KrF excimer laser to provide specific laser-induced periodic structures. Then, Au was deposited onto the modified PEN via a vacuum evaporation method. Atomic force microscopy and scanning electron microscopy revealed the dependence of the surface morphology on the incidence angle of the laser beam. A resazurin assay cytotoxicity test confirmed safety against healthy human cells and even cell proliferation was observed after 72 h of incubation. We have obtained satisfactory results, demonstrating that monometallic Au nanowires can be applied in biomedical applications and provide the biocompatibility of bimetallic Au/AgNWs.

Versatile Construction of Biomimetic Nanosensors for Electrochemical Monitoring of Intracellular Glutathione.

The current strategies for nanoelectrode functionalization usually involve sophisticated modification procedures, uncontrollable and unstable modifier assembly, as well as a limited variety of modifiers. To address this issue, we propose a versatile strategy for large-scale synthesis of biomimetic molecular catalysts (BMCs) modified nanowires (NWs) to construct functionalized electrochemical nanosensors. This design protocol employs an easy, controllable and stable assembly of diverse BMCs-poly(3,4-ethylenedioxythiophene) (PEDOT) composites on conductive NWs. The intrinsic catalytic activity of BMCs combined with outstanding electron transfer ability of conductive polymer enables the nanosensors to sensitively and selectively detect various biomolecules. Further application of sulfonated cobalt phthalocyanine functionalized nanosensors achieves real-time electrochemical monitoring of intracellular glutathione levels and its redox homeostasis in single living cells for the first time.