Do Macrocyclic Peptide Drugs Interact with Bile Salts under Simulated Gastrointestinal Conditions?

Peptide drugs face several barriers to oral delivery, including enzymatic degradation in the gastrointestinal tract and low membrane permeability. Importantly, the direct interaction between various biorelevant colloids (i.e., bile salt micelles and bile salt-phospholipid mixed micelles) present in the aqueous gastrointestinal environment and peptide drug molecules has not been studied. In this work, we systematically characterized interactions between a water-soluble model peptide drug, octreotide, and a range of physiologically relevant bile salts in solution. Octreotide membrane flux in pure bile salt solutions and commercially available biorelevant media, i.e., fasted state simulated intestinal fluid (FaSSIF) and fed state simulated intestinal fluid (FeSSIF), was evaluated using a side-by-side diffusion cell equipped with a cellulose dialysis membrane. All seven micellar bile salt solutions as well as FaSSIF and FeSSIF decreased octreotide membrane flux, and dihydroxy bile salts were found to have a much larger effect than trihydroxy bile salts. An inverse relationship between octreotide membrane flux and pancreatic enzymatic stability was also observed; bile salt micelles and bile salt-phospholipid mixed micelles provided a protective effect toward enzymatic degradation and prolonged octreotide half-life in vitro. Diffusion ordered nuclear magnetic resonance (DOSY NMR) spectroscopy and dynamic light scattering (DLS) were used as complementary experimental techniques to confirm peptide-micelle interactions in solution. Experiments were also performed using desmopressin as a second model peptide drug; desmopressin interacted with bile salts in solution, albeit to a lower extent relative to octreotide. The findings described herein demonstrate that amphiphilic, water-soluble peptide drugs do interact with bile salts and phospholipids in solution, with an effect on peptide membrane flux and enzymatic stability. Correspondingly, oral peptide drug absorption and bioavailability may be impacted.

Physical-Chemical Characterization of Octreotide Encapsulated in Commercial Glucose-Star PLGA Microspheres.

Sandostatin LAR (SLAR) is an injectable long-acting release (LAR) microsphere formulation for octreotide based on a biodegradeable glucose star copolymer of d,l-lactic and glycolic acids (PLGA-glu), which is primarily used for the treatment of patients with acromegaly. There currently is no generic SLAR approved in the United States despite expiration of patent coverage. To understand better this important formulation, SLAR was assessed for its composition and physical-chemical properties. Octreotide release kinetics was monitored under physiological conditions over 56 days together with several bioerosion parameters [mass loss, water uptake, pH of release media, polymer molecular weight (Mw), and confocal microscopy after BODIPY uptake]. A significant increase in the amount of released peptide occurred after day 14. After 1 day of incubation in PBST, octreotide was not extractable completely from SLAR during 2 h of the extraction process, but complete extraction was accomplished after 24 h, which suggested that strong and noncovalent PLGA-octreotide interactions occurred beginning in the initial release phase. Leuprolide is considered as a cationic peptide competitor for octreotide-PLGA interactions and its presence in the release medium resulted in more continuous octreotide release from SLAR, which was linearly correlated with the mass loss from the polymer (i.e., an indication of erosion-controlled release). These data strongly suggest that octreotide forms a salt with acid end groups of linear PLGA chains that are either present as impurities in, and/or produced by the degradation of, the PLGA-Glu. This salt is expected to catalyze octreotide acylation and extend peptide release beyond that driven by erosion control. The characterization studies of physicochemical properties of SLAR described here could be useful for the development and regulatory evaluation of generic octreotide microspheres as well as new polymer formulations, in which the polymer strongly interacts with encapsulated peptides.

Proton Oriented-"Smart Depot" for Responsive Release of Ca2+ to Inhibit Peptide Acylation in PLGA Microspheres.

PURPOSE: The purpose of this study was to characterize and detail the mechanism of a smart Ca2+ release depot (Ca3(PO4)2) about its ability for sustainable inhibition on peptide acylation within PLGA microspheres. METHODS: The octreotide acetate release and acylation kinetics were analyzed by RP-HPLC. Changes of Ca2+ concentration and adsorption behavior were determined by a Calcium Colorimetric Assay Kit. The inner pH changes were delineated by a classic pH sensitive probe, Lysosensor yellow/ blue® dextran. Morphological changes of microspheres, adsorption between polymer and additive, transformation of Ca3(PO4)2 were characterized using SEM, FTIR and SSNMR separately. RESULTS: Before and after microspheres formulation, the property and effectiveness of Ca3(PO4)2 were investigated. Compared with a commonly used calcium salt (CaCl2), high encapsulation efficiency (96.56%) of Ca3(PO4)2 guarantees lasting effectiveness. In an increasingly acidic environment that simulated polymer degradation, the poorly water-soluble Ca3(PO4)2 could absorb protons and transform into the more and more soluble CaHPO4 and Ca(H2PO4)2 to produce sufficient Ca2+ according to severity of acylation. The corresponding Ca2+ produce capacity fully met the optimum inhibition requirement since the real-time adsorption sites (water-soluble carboxylic acids) inside the degrading microspheres were rare. A sustained retention of three switchable calcium salts and slow release of Ca2+ were observed during the microsphere incubation. FTIR results confirmed the long-term inhibition effect induced by Ca3(PO4)2 on the adsorption between drug and polymer. CONCLUSIONS: With the presence of the smart Ca2+ depot (Ca3(PO4)2) in the microspheres, a sustainable and long-term inhibition of peptide acylation was achieved.

Octreotide Nanoparticles Showed Affinity for In Vivo MIA Paca-2 Inducted Pancreas Ductal Adenocarcinoma Mimicking Pancreatic Polypeptide-Secreting Tumor of the Distal Pancreas (PPoma).

PURPOSE: Pancreatic Polypeptide-secreting tumor of the distal pancreas (PPoma) is a rare, difficult and indolent type of cancer with a survival rate of 5-year in only 10% of all cases. The PPoma is classified as a neuroendocrine tumor (NET) not functioning that overexpresses SSTR 2 (somatostatin receptor subtype 2). Thus, in order to improve the diagnosis of this type of tumor, we developed nanoparticulate drug carriers based on poly-lactic acid (PLA) polymer loaded with octreotide and radiolabeled with Technetium-99 m (99mTc). METHODS: PLA/PVA octreotide nanoparticles were developed by double-emulsion technique. These nanoparticles were characterized by Atomic Force Microscopy (AFM) and Dynamic Light Scattering (DLS) and radiolabeled with 99mTc by the direct via forming 99mTc-PLA/PVA octreotide nanoparticles. The safety of these nanosystems was evaluated by the MTT cell toxicity assay and their in vivo biodistribution was evaluated in xenografted inducted animals. RESULTS: The results showed that a 189 nm sized nanoparticle were formed with a PDI of 0,097, corroborating the monodispersive behavior. These nanoparticles were successfully radiolabeled with 99mTc showing uptake by the inducted tumor. The MTT assay corroborated the safety of the nanosystem for the cells. CONCLUSION: The results support the use of this nanosystem (99mTc-PLA/PVA octreotide nanoparticles) as imaging agent for PPoma. Graphical Abstract Polypeptide-Secreting Tumor of the Distal Pancreas (PPoma) Radiolabeled Nanoparticles for Imaging.

PEGylated trimethylchitosan emulsomes conjugated to octreotide for targeted delivery of sorafenib to hepatocellular carcinoma cells of HepG2.

The current study aimed to develop PEGylated trimethyl chitosan (TMC) coated emulsomes (EMs) conjugated with octreotide for targeted delivery of sorafenib to hepatocellular carcinoma cells (HCC) of HepG2. Sorafenib loaded TMC coated EMs were prepared by the emulsion evaporation method and characterized concerning particle size, zeta potential, drug encapsulation efficiency, and in vitro drug release. Synthesized EMs were then conjugated to octreotide. The cytotoxicity of the targeted and non-targeted EMs was determined by cellular uptake and MTT assay on HepG2 cell. Cell cycle assay was also studied using flow cytometry. The results showed the optimized EMs had the particle size of 127 nm, zeta potential of -5.41 mV, loading efficiency of 95%, and drug release efficiency of 62% within 52 h. Octreotide was attached efficiently to the surface of EMs as much as 71%. MTT assay and cellular uptake studies showed that targeted EMs had more cytotoxicity than free sorafenib and non-targeted EMs. Cell cycle analyses revealed that there was a significant more accumulation of targeted EMs treated HepG2 cells in the G1 phase than free sorafenib and non-targeted EMs. The results indicate that designed EMs may be promising for the treatment of hepatocellular carcinoma.

Modification of Three-Phase Drug Release Mode of Octreotide PLGA Microspheres by Microsphere-Gel Composite System.

In order to obtain sustained release of biodegradable microspheres, the purpose of this study was to design and characterize an injectable octreotide microsphere-gel composite system. The octreotide microspheres were prepared by phase separation method, which used PLGA as a carrier material, dimethyl silicone oil as a phase separation reagent, and n-heptane-Span 80 as a hardener. In addition, we used poloxamer 407 (PL 407) and poloxamer 188 (PL 188) as the thermosensitive gel matrix material. The composite system was obtained by scattering octreotide microspheres in a poloxamer gel. In vitro data showed that the release time of the composite system could last for about 50 days. Because of the blocking and control actions of the poloxamer gel, the initial burst release was significantly reduced and the plateau phase was eliminated. Pharmacokinetic data showed that the burst release of the composite system was significantly less than that of the microspheres, i.e., Cmax1 was reduced by about half. From day 2 to day 50, higher plasma concentration levels and more stable drug release behavior were exhibited. In addition, the good biocompatibility of the composite system in vivo was also demonstrated by hematoxylin-eosin (HE) staining. Therefore, the octreotide microsphere-gel composite system will be a new direction for hydrophilic polypeptide/protein-loaded sustained release dosage forms with high pharmacological activity.

Somatostatin Receptor-Mediated Tumor-Targeting Nanocarriers Based on Octreotide-PEG Conjugated Nanographene Oxide for Combined Chemo and Photothermal Therapy.

Nano-sized in vivo active targeting drug delivery systems have been developed to a high anti-tumor efficacy strategy against certain cancer-cells-specific. Graphene based nanocarriers with unique physical and chemical properties have shown significant potentials in this aspect. Here, octreotide (OCT), an efficient biotarget molecule, is conjugated to PEGylated nanographene oxide (NGO) drug carriers for the first time. The obtained NGO-PEG-OCT complex shows low toxicity and excellent stability in vivo and is able to achieve somatostatin receptor-mediated tumor-specific targeting delivery. Owing to the high loading efficiency and accurate targeting delivery of anti-cancer drug doxorubicin (DOX), our DOX loaded NGO-PEG-OCT complex offers a remarkably improved cancer-cell-specific cellular uptake, chemo-cytotoxicity, and decreased systemic toxicity compared to free DOX or NGO-PEG. More importantly, due to its strong near-infrared absorption, the NGO-PEG-OCT complex further enhances efficient photothermal ablation of tumors, delivering combined chemo and photothermal therapeutic effect against cancer cells.

Subcutaneously Administered Self-Cleaving Hydrogel-Octreotide Conjugates Provide Very Long-Acting Octreotide.

We developed a long-acting drug-delivery system that supports subcutaneous administration of the peptidic somatostatin agonist octreotide-a blockbuster drug used to treat acromegaly and neuroendocrine tumors. The current once-a-month polymer-encapsulated octreotide, Sandostatin LAR, requires a painful intragluteal injection through a large needle by a health-care professional. To overcome such shortcomings, Tetra-PEG hydrogel microspheres were covalently attached to the α-amine of d-Phe(1) or the ε-amine of Lys(5) of octreotide by a self-cleaving ß-eliminative linker; upon subcutaneous injection in the rat using a small-bore needle, octreotide was slowly released. The released drug from the ε-octreotide conjugate showed a remarkably long serum half-life that exceeded two months. The α-octreotide conjugate had a half-life of ∼2 weeks, and showed an excellent correlation of in vitro and in vivo drug release. Pharmacokinetic models indicate these microspheres should support once-weekly to once-monthly self-administered subcutaneous dosing in humans. The hydrogel-octreotide conjugate shows the favorable pharmacokinetics of Sandostatin LAR without its drawbacks.

Inhibition of Octreotide Acylation Inside PLGA Microspheres by Derivatization of the Amines of the Peptide with a Self-Immolative Protecting Group.

Acylation of biopharmaceuticals such as peptides has been identified as a major obstacle for the successful development of PLGA controlled release formulations. The purpose of this study was to develop a method to inhibit peptide acylation in poly(d,l-lactide-co-glycolide) (PLGA) formulations by reversibly and temporarily blocking the amine groups of a model peptide (octreotide) with a self-immolative protecting group (SIP), O-4-nitrophenyl-O'-4-acetoxybenzyl carbonate. The octreotide with two self-immolative protecting groups (OctdiSIP) on the N-terminus and lysine side chain was synthesized by reaction of the peptide with O-4-nitrophenyl-O'-4-acetoxybenzyl carbonate, purified by preparative RP-HPLC and characterized by mass spectrometry. Degradation studies of OctdiSIP in aqueous solutions of different pH values showed that protected octreotide was stable at low pH (pH 5) whereas the protecting group was eliminated at physiological pH, especially in the presence of an esterase, to generate native octreotide. OctdiSIP encapsulated in PLGA microspheres, prepared using a double emulsion solvent evaporation method, showed substantial inhibition of acylation as compared to the unprotected octreotide: 52.5% of unprotected octreotide was acylated after 50 days incubation of microspheres in PBS pH 7.4 at 37 °C, whereas OctdiSIP showed only 5.0% acylation in the same time frame. In conclusion, the incorporation of self-immolative protection groups provides a viable approach for inhibition of acylation of peptides in PLGA delivery systems.

Well-Defined Redox-Sensitive Polyethene Glycol-Paclitaxel Prodrug Conjugate for Tumor-Specific Delivery of Paclitaxel Using Octreotide for Tumor Targeting.

A redox-sensitive prodrug, octreotide(Phe)-polyethene glycol-disulfide bond-paclitaxel [OCT(Phe)-PEG-ss-PTX], was successfully developed for targeted intracellular delivery of PTX. The formulation emphasizes long-circulation-time polymer-drug conjugates, combined targeting based on EPR and OCT-receptor mediated endocytosis, sharp redox response, and programmed drug release. The nontargeted redox-sensitive prodrug, mPEG-ss-PTX, and the targeted insensitive prodrug, OCT(Phe)-PEG-PTX, were also synthesized as controls. These polymer-PTX conjugates, structurally confirmed by 1H NMR, exhibited approximately 23,000-fold increase in water solubility over parent PTX and possessed drug contents ranging from 11% to 14%. The redox-sensitivity of the objective OCT(Phe)-PEG-ss-PTX prodrug was verified by in vitro PTX release profile in simulated reducing conditions, and the SSTRs-mediated endocytosis was demonstrated by flow cytometry and confocal laser scanning microscopy analyses. Consequently, compared with mPEG-PTX and OCT(Phe)-PEG-PTX, the OCT(Phe)-PEG-ss-PTX exhibited much stronger cyotoxicity and apoptosis-inducing ability against NCI-H446 tumor cells (SSTRs overexpression), whereas a comparable cytotoxicity of these prodrugs was obtained against WI-38 normal cells (no SSTRs expression). Finally, the in vivo studies on NCI-H466 tumor-bearing nude mice demonstrated that the OCT(Phe)-PEG-ss-PTX possessed superior tumor-targeting ability and antitumor activity over mPEG-PTX, OCT(Phe)-PEG-PTX and Taxol, as well as minimal collateral damage. This targeted redox-sensitive polymer-PTX prodrug system is promising in tumor therapy.

Identification and Assessment of Octreotide Acylation in Polyester Microspheres by LC-MS/MS.

PURPOSE: Polyesters with hydrophilic domains, i.e., poly(D,L-lactic-co-glycolic-co-hydroxymethyl glycolic acid) (PLGHMGA) and a multiblock copolymer of poly(ε-caprolactone)-PEG-poly(ε-caprolactone) and poly(L-lactide) ((PC-PEG-PC)-(PL)) are expected to cause less acylation of encapsulated peptides than fully hydrophobic matrices. Our purpose is to assess the extent and sites of acylation of octreotide loaded in microspheres using tandem mass spectrometry analysis. METHODS: Octreotide loaded microspheres were prepared by a double emulsion solvent evaporation technique. Release profiles of octreotide from hydrophilic microspheres were compared with that of PLGA microspheres. To scrutinize the structural information and localize the actual modification site(s) of octreotide, liquid chromatography ion-trap mass spectrometry (LC-ITMS) was performed on the acylated adducts. RESULTS: Hydrophilic microspheres showed less acylated adducts in comparison with PLGA microspheres. LC-MS/MS showed that besides the N-terminus and primary amine of lysine, the primary hydroxyl of the end group of octreotide was also subjected to acylation. Nucleophilic attack of the peptide can also occur to the carbamate bond presented in (PC-PEG-PC)-(PL) since 1,4-butanediisocyanate was used as the chain extender. CONCLUSIONS: Hydrophilic polyesters are promising systems for controlled release of peptide because substantially less acylation occurs in microspheres based on these polymers. LC-ITMS provided detailed structural information of octreotide modifications via mass analysis of ion fragments.

Synthesis and radiolabeling of (111)In-core-cross linked polymeric micelle-octreotide for near-infrared fluoroscopy and single photon emission computed tomography imaging.

The objective of this study was the development of a dual-modality imaging device, namely (111)In-core-cross-linked polymeric micelle (CCPM)-octreotide, for neuroendocrine tumor detection, using near-infrared fluoroscopy (NIRF) and single photon emission computed tomography (SPECT). The tumor targeting ability of the (111)In-labeled CCPM-octreotide was evaluated in a tumor mouse model. SPECT/CT, NIRF and gamma imaging results showed high tumor uptake of (111)In-labeled CCPM-octreotide. In contrast, there was a much lower signal in the same mouse model injected with (111)In-labeled CCPM. The high accumulation of (111)In-labeled CCPM-octreotide in U87 tumor was reduced after co-injection with an excess amount of CCPM-octreotide. These results suggested CCPM-octreotide's potential applications in tumor diagnosis, drug delivery and molecular imaging.

Aqueous remote loading of model cationic peptides in uncapped poly(lactide-co-glycolide) microspheres for long-term controlled release.

Remote loading microencapsulation of peptides into polymer microspheres without organic solvent represents a promising alternative to develop long-acting release depots relative to conventional encapsulation methods. Here, we formulated drug-free microspheres from two kinds of uncapped poly(lactide-co-glycolides) (PLGAs), i.e., ring-opening polymerized Expansorb® DLG 50-2A (50/50, 11.2 kDa) and Expansorb® DLG 75-2A (75/25, 9.0 kDa), and evaluated their potential capacity to remote-load and control the release of two model peptides, leuprolide and octreotide. Degradation and erosion kinetics, release mechanism, and storage stability was also assessed. As control formulations, peptide was loaded in the same PLGA 75/25 polymer by the conventional double emulsion-solvent evaporation method (W/O/W) and remote loaded in polycondensation poly(lactic-co-glycolic acid) 75/25 (Wako 7515, 14.3 kDa). Loading content of 6.7%-8.9% w/w (~ 67%-89% encapsulation efficiency (EE)) was attained for octreotide, and that of 9.5% w/w loading (~ 95% EE) was observed for leuprolide, by the remote loading paradigm. Octreotide and leuprolide were both slowly and continuously released in vitro from the remote-loaded Expansorb® DLG 75-2A MPs for over 56 days, which was highly similar to that observed from traditionally-loaded formulations by W/O/W (8.8% loading, 52.8% EE). The faster release kinetics was observed for the faster degrading PLGA 50/50 remote-loaded Expansorb® DLG 50-2A MPs relative to microspheres from the PLGA 75/25 Expansorb® DLG 75-2A. Despite slight differences in degradation kinetics, the release mechanism of octreotide from the Expansorb® microspheres, whether remote loaded or by W/O/W, was identical as determined by release vs. mass loss curves. Octreotide acylation was also minimal (< ~ 10%) for this polymer. Finally, drug-free Expansorb® DLG 75-2A MPs displayed excellent storage stability over 3 months. Overall, this work offers support for the use of ring-opening Expansorb® PLGA-based microspheres to remote load peptides to create simple and effective long-acting release depots.

(89)Zr-labeled paramagnetic octreotide-liposomes for PET-MR imaging of cancer.

PURPOSE: Dual-modality PET/MR platforms add a new dimension to patient diagnosis with high resolution, functional, and anatomical imaging. The full potential of this emerging hybrid modality could be realized by using a corresponding dual-modality probe. Here, we report pegylated liposome (LP) formulations, housing a MR T(1) contrast agent (Gd) and the positron-emitting (89)Zr (half-life: 3.27 days), for simultaneous PET and MR tumor imaging capabilities. METHODS: (89)Zr oxophilicity was unexpectedly found advantageous for direct radiolabeling of preformed paramagnetic LPs. LPs were conjugated with octreotide to selectively target neuroendocrine tumors via human somatostatin receptor subtype 2 (SSTr2). (89)Zr-Gd-LPs and octreotide-conjugated homolog were physically, chemically and biologically characterized. RESULTS: (89)Zr-LPs showed reasonable stability over serum proteins and chelator challenges for proof-of-concept in vitro and in vivo investigations. Nuclear and paramagnetic tracking quantified superior SSTr2-recognition of octreotide-LP compared to controls. CONCLUSIONS: This study demonstrated SSTr2-targeting specificity along with direct chelator-free (89)Zr-labeling of LPs and dual PET/MR imaging properties.

Octreotide labeled aggregates containing platinum complexes as nanovectors for drug delivery.

The synthesis, formulation and a complete physico-chemical characterization, by dynamic light scattering and small angle neutron scattering techniques, of new liposomal aggregates obtained by co-assembling an amphiphilic molecule containing a platinum complex, Peg1500 -Lys(Pt-aminoEtGly)-Lys(C18)2, (abbreviated as (C18)2-PKAG-Pt), with a second amphiphilic monomer, (C18H37)2NCO(CH2)2CO(AdOO)5-Oct ((C18)2 L5-Oct), containing the octreotide bioactive peptide, is reported. Liposomes of (C18)2-PKAG-Pt present a radius of 48 nm, whereas the mixed aggregates (C18)2-PKAG-Pt/(C18)2L5-Oct at 90/10 M ratio give larger liposomes with a radius of 84 nm. In both cases, the bilayer thickness is ~5.3 nm. Encapsulation of doxorubicin in mixed liposomes is also obtained by using the pH gradient method. The obtained liposomes could represent a new target selective cargo system for delivery of cisplatin based drugs and/or doxorubicin on cells overexpressing the sstr2 and sstr5 somatostatin receptors.

Controlled release of octreotide and assessment of peptide acylation from poly(D,L-lactide-co-hydroxymethyl glycolide) compared to PLGA microspheres.

PURPOSE: To investigate the in vitro release of octreotide acetate, a somatostatin agonist, from microspheres based on a hydrophilic polyester, poly(D,L-lactide-co-hydroxymethyl glycolide) (PLHMGA). METHODS: Spherical and non-porous octreotide-loaded PLHMGA microspheres (12 to 16 µm) and loading efficiency of 60-70% were prepared by a solvent evaporation. Octreotide release profiles were compared with commercial PLGA formulation (Sandostatin LAR(®)); possible peptide modification with lactic, glycolic and hydroxymethyl glycolic acid units was monitored. RESULTS: PLHMGA microspheres showed burst release (~20%) followed by sustained release for 20-60 days, depending on the hydrophilicity of the polymer. Percentage of released loaded peptide was high (70-90%); > 60% of released peptide was native octreotide. PLGA microspheres did not show peptide release for the first 10 days, after which it was released in a sustained manner over the next 90 days; > 75% of released peptides were acylated adducts. CONCLUSIONS: PLHMGA microspheres are promising controlled systems for peptides with excellent control over release kinetics. Moreover, substantially less peptide modification occurred in PLHMGA than in PLGA microspheres.

Minimizing the initial burst of octreotide acetate from glucose star PLGA microspheres prepared by the solvent evaporation method.

Sandostatin long-acting release (SLAR) depot for 1-month controlled release of octreotide is a somatostatin analogue product that has been used extensively in the pharmacological treatment of acromegaly. The complexities in the SLAR coacervation manufacturing processes and the use of a unique glucose-starpoly(lactic-co-glycolic acid) (PLGA-glu) may have contributed to the lack of US FDA-approved generic products referencing SLAR in the USA. To address this challenge, we encapsulated octreotide acetate by the commonly used solvent evaporation method in microspheres of a similar composition to SLAR, including the use of a comparable PLGA-glu. Based on our previous study that identified key formulation variables to prepare octreotide acetate/PLGA-glu microspheres, including lowering initial peptide pH and introducing an annealing step post loading, here we added NaCl to the external water phase to further improve the formulation. The resulting microspheres exhibited highly similar release and stability performance in vitro to SLAR, including an exceptionally low initial burst. The very low initial burst was also confirmed by pharmacokinetics in rats. Full erosion behavior analysis (polymer MW, water uptake and mass loss) revealed a slightly faster degradation of SLAR than the solvent evaporation formulations. Analysis of kinetics of dry Tg of the formulations reflected (a) the elevated residual solvent in SLAR and was not duplicated in the solvent evaporation formulations, and (b) the slightly higher Tg of peptide loaded formulations relative to than blank microspheres, consistent with the interaction of the acetate salt of octreotide with linear PLGA chains in the PLGA-glu. These data indicate that it is possible to prepare peptide loaded microspheres by the solvent evaporation method with extraordinarily similar performance to microspheres, such as those in SLAR, that are prepared by the low-burst release coacervation method.

Development and characterization of composition-equivalent formulations to the Sandostatin LAR® by the solvent evaporation method.

Sandostatin long-acting release® (SLAR) is a long-acting injectable somatostatin analogue formulation composed of octreotide encapsulated in glucose-initiated poly(lactic-co-glycolic acid) (PLGA) microspheres. Despite the end of patent protection, SLAR remains resistant to generic competition likely due to complexity of production process, the uniqueness of the glucose star polymer, and the instability of octreotide in the formulation. Here, we describe development of glucose-PLGA-based composition-equivalent to SLAR formulations prepared by double emulsion-solvent evaporation method and the effect of variations in encapsulation variables on release kinetics and other formulation characteristics. The following encapsulation variables were adjusted at constant theoretical loading of 7.0% peptide: PLGA concentration, pH of inner water phase, and stirring rate. After final drying, the microspheres were examined with and without annealing at 50 °C under vacuum for 3 days. The loading and encapsulation efficiency (EE) of octreotide acetate, manufacturing yield, and in vitro drug release kinetics in PBStc (10 mM phosphate-buffered saline (PBS) with 1% triethyl citrate and 0.02% sodium azide at pH 7.4) were determined by UPLC. The in vitro release and acylation kinetics of octreotide for the solvent evaporation formulations prepared were similar to SLAR although the initial burst was slightly higher. Key formulation steps identified to maximize microsphere yield and minimize residual solvent and initial burst release included (a) addition of acetic acid to the peptide before preparation and (b) annealing the microspheres under vacuum after drying. Controlled release octreotide formulations prepared and investigated in this study could provide a better understanding of the effect of production variables on release performance and supply information useful for making progress in manufacturing of SLAR generic equivalents.

Effect of octreotide-polyethylene glycol(100) monostearate modification on the pharmacokinetics and cellular uptake of nanostructured lipid carrier loaded with hydroxycamptothecine.

A new conjugate, octreotide-polyethylene glycol(100) monostearate (OPMS), was developed for the enhancement of targeting delivery of hydroxycamptothecine (HCPT) loaded in nanostructured lipid carrier (NLC). 2 × 10(-3) and 5 × 10(-3) mmol of OPMS were respectively used to modify NLC so that the targeted nanocarriers with low and high ligand density were obtained. For comparison, the pegylated NLCs without octreotide were prepared by adding equal molar amounts of polyethylene glycol(100) monostearate (PGMS). The relation between the modification levels and properties of various NLCs were studied in vivo and in vitro. At a high modification level, a slower release rate of HCPT and the more stable nanocarriers was achieved. At the same time, the fixed aqueous layer thickness (FALT) and average surface density of PEG chains (SD(PEG)) was increased, but the distance (D) between two neighboring PEG grafting sites became narrower. The in vivo pharmacokinetic study in healthy rat indicated that the modified NLCs had a longer circulation than NLC (P < 0.05) due to pegylation effect and OPMS modified NLCs had larger MRT and AUC(0-t) than that of PGMS modified NLCs at the same modification level. Furthermore, the florescence microscopy observation also showed the targeting effect of octreotide modification on somatostatin receptors (SSTRs) of tumor cell (SMMC-7721). The uptake of SMMC-7721 was much more than that of normal liver cell (L02) for OPMS modified NLC, and the highest uptake was observed for 5 × 10(-3) mmol of OPMS modified one. No obvious difference was found among the L02 uptake of OPMS modified NLCs and NLC, but their uptake was higher than that of PGMS modified NLCs. All the results indicated that the OPMS highly modified NLCs would improve the effect of antitumor therapy by inhibiting the degradation, evading RES and enhancing the drug uptake of tumor cells.

Octreotide-modified polymeric micelles as potential carriers for targeted docetaxel delivery to somatostatin receptor overexpressing tumor cells.

PURPOSE: Somatostatin analogue octreotide (OCT)-modified PEG-b-PLA micelles were constructed to bind to somatostatin receptors (SSTRs) overexpressed on tumor cells for enhanced intracellular drug delivery and improved therapeutic efficacy for malignant tumors. METHODS: Copolymers conjugated with octreotide (OCT-PEG6000-b-PLA5000) were synthesized. The fluorescent probe DiI or docetaxel (DTX)-loaded micelles with or without octreotide modification (OCT-PM-DiI, PM-DiI, OCT-PM-DTX and PM-DTX) were prepared, and their physiochemical properties, intracellular delivery in vitro or anti-tumor activity in vivo were evaluated, respectively. RESULTS: The CMC of OCT-PEG6000-b-PLA5000 was quite low (<10⁻6 mol/L). All micelles were less than 80 nm with spherical shape and high encapsulation efficiency. DTX molecules were well dispersed in the micelles without chemical interactions with the polymers. Flow cytometry and confocal microscopy results showed that OCT-PM-DiI enhanced intracellular delivery efficiency via receptor-mediated endocytosis in NCI-H446 cells; the optimal modification ratio of OCT on micelle surface was 5%. OCT-PM-DTX exhibited higher retardation of tumor growth after intravenous injections into xenograft NCI-H446 tumor model; octreotide-modified micelles did not show severe toxicity. CONCLUSIONS: SSTRs targeting micelles may serve as promising nanocarriers in tumor treatment for hydrophobic anticancer drugs, such as DTX.