Polysaccharide-Derived Ice Recrystallization Inhibitors with a Modular Design: The Case of Dextran-Based Graft Polymers.

Ice recrystallization inhibitors inspired from antifreeze proteins (AFPs) are receiving increasing interest for cryobiology and other extreme environment applications. Here, we present a modular strategy to develop polysaccharide-derived biomimetics, and detailed studies were performed in the case of dextran. Poly(vinyl alcohol) (PVA) which has been termed as one of the most potent biomimetics of AFPs was grafted onto dextran via thiol-ene click chemistry (Dex-g-PVA). This demonstrated that Dex-g-PVA is effective in IRI and its activity increases with the degree of polymerization (DP) (sizes of ice crystals were 18.846 ± 1.759 and 9.700 ± 1.920 µm with DPs of 30 and 80, respectively) and fraction of PVA. By means of the dynamic ice shaping (DIS) assay, Dex-g-PVA is found to engage on the ice crystal surfaces, thus the ice affinity accounts for their IRI activity. In addition, Dex- g-PVA displayed enhanced IRI activity compared to that of equivalent PVA alone. We speculate that the hydrophilic nature of dextran would derive PVA in a stretch conformation that favors ice binding. The modular design can not only offer polysaccharides IRI activity but also favor the ice-binding behavior of PVA.

Design of an Ice Recrystallization-Inhibiting Polyampholyte-Containing Graft Polymer for Inhibition of Protein Aggregation.

Freezing-induced damage to proteins, through osmotic stress and ice recrystallization, during protein processing and long-term storage is a serious concern and may lead to loss of protein activity owing to denaturation. In this study, graft copolymers composed of a cryoprotective polymer (capable of preventing osmotic stress) and poly(vinyl alcohol) (PVA; known for its high ice recrystallization inhibition (IRI) property) were developed. The polymers had high IRI activity, albeit slightly lower than that of PVA alone, but substantially higher than that of succinylated ε-poly-l-lysine (PLLSA) alone. The graft polymers showed an efficiency higher than that of PVA or PLLSA alone in protecting proteins from multiple freeze-thaw cycles, as well as during prolonged freezing, indicating a synergy between PVA and PLLSA. The PLLSA-based graft polymer is a promising material for use in protein biopharmaceutics for the long-term storage of proteins under freezing conditions.

Hydroxyl Group Separation Distances in Anti-Freeze Compounds and Their Effects on Ice Nucleation.

Since the discovery of biological antifreeze glycoproteins (AFGPs), which can inhibit ice nucleation, there has been considerable interest in understanding their mechanisms and mimicking them in synthetic polymers. In this study, we used molecular dynamics simulations of modified polyvinyl alcohol (PVA) compounds to show that the hydroxyl (OH) group distance is a key factor in whether certain compounds promote or inhibit ice nucleation. A hydroxyl distance smaller than ~2.8 Å but greater than ~7.1 Å in modified PVA (MPVA) compounds was associated with the promotion of ice nucleation, while a hydroxyl group separation distance of approximately ~5.0 Å was correlated with a delay in ice nucleation, owing to changes in the energy of the system. Thus, these results may help explain some of the mechanisms of current known anti-freeze compounds and may have implications for designing new anti-freeze compounds in the future.

Blocking rapid ice crystal growth through nonbasal plane adsorption of antifreeze proteins.

Antifreeze proteins (AFPs) are a unique class of proteins that bind to growing ice crystal surfaces and arrest further ice growth. AFPs have gained a large interest for their use in antifreeze formulations for water-based materials, such as foods, waterborne paints, and organ transplants. Instead of commonly used colligative antifreezes such as salts and alcohols, the advantage of using AFPs as an additive is that they do not alter the physicochemical properties of the water-based material. Here, we report the first comprehensive evaluation of thermal hysteresis (TH) and ice recrystallization inhibition (IRI) activity of all major classes of AFPs using cryoscopy, sonocrystallization, and recrystallization assays. The results show that TH activities determined by cryoscopy and sonocrystallization differ markedly, and that TH and IRI activities are not correlated. The absence of a distinct correlation in antifreeze activity points to a mechanistic difference in ice growth inhibition by the different classes of AFPs: blocking fast ice growth requires rapid nonbasal plane adsorption, whereas basal plane adsorption is only relevant at long annealing times and at small undercooling. These findings clearly demonstrate that biomimetic analogs of antifreeze (glyco)proteins should be tailored to the specific requirements of the targeted application.

Understanding Poly(vinyl alcohol)-Mediated Ice Recrystallization Inhibition through Ice Adsorption Measurement and pH Effects.

The development of improved cryopreservative materials is necessary to enable complete recovery of living cells and tissue after frozen storage. Remarkably, poly(vinyl alcohol) (PVA) displays some of the same cryoprotective properties as many antifreeze proteins found in cold tolerant organisms. In particular, PVA is very effective at halting the Ostwald ripening of ice, a process that mechanically damages cells and tissue. Despite the large practical importance of such a property, the mechanism by which PVA interacts with ice is poorly understood, hindering the development of improved cryoprotective materials. Herein, we quantitatively evaluated ice growth kinetics in the presence of PVA at different pH conditions and in the presence of a range of neutral salts. We demonstrated that pH, but not salt identity, alters the ability of PVA to halt ice grain coarsening. These observations are consistent with hydrogen-bonding playing a crucial role in PVA-mediated ice recrystallization inhibition. The evolution of the size distribution of ice crystals with annealing was consistent with incomplete surface coverage of ice with PVA. Binding assay measurements of dissolved fluorescently labeled PVA in an ice slurry showed that PVA interacts with ice through weak adsorption (<9%) to the ice crystal surface, which stands in contrast to fluorescently tagged type III antifreeze peptide, which binds strongly (ca. 64%) under the same conditions.

Regioregular Alternating Polyampholytes Have Enhanced Biomimetic Ice Recrystallization Activity Compared to Random Copolymers and the Role of Side Chain versus Main Chain Hydrophobicity.

Antifreeze proteins from polar fish species are potent ice recrystallization inhibitors (IRIs) effectively stopping all ice growth. Additives that have IRI activity have been shown to enhance cellular cryopreservation with potential to improve the distribution of donor cells and tissue. Polyampholytes, polymers with both anionic and cationic side chains, are a rapidly emerging class of polymer cryoprotectants, but their mode of action and the structural features essential for activity are not clear. Here regioregular polyampholytes are synthesized from maleic anhydride copolymers to enable stoichiometric installation of the charged groups, ensuring regioregularity, which is not possible using conventional random copolymerization. A modular synthetic strategy is employed to enable the backbone and side chain hydrophobicity to be varied, with side chain hydrophobicity found to have a profound effect on the IRI activity. The activity of the regioregular polymers was found to be superior to those derived from a standard random copolymerization with statistical incorporation of monomers, demonstrating that sequence composition is crucial to the activity of IRI active polyampholytes.

Influence of Block Copolymerization on the Antifreeze Protein Mimetic Ice Recrystallization Inhibition Activity of Poly(vinyl alcohol).

Antifreeze (glyco) proteins are produced by many cold-acclimatized species to enable them to survive subzero temperatures. These proteins have multiple macroscopic effects on ice crystal growth which makes them appealing for low-temperature applications-from cellular cryopreservation to food storage. Poly(vinyl alcohol) has remarkable ice recrystallization inhibition activity, but its mode of action is uncertain as is the extent at which it can be incorporated into other high-order structures. Here the synthesis and characterization of well-defined block copolymers containing poly(vinyl alcohol) and poly(vinylpyrrolidone) by RAFT/MADIX polymerization is reported, as new antifreeze protein mimetics. The effect of adding a large second hydrophilic block is studied across a range of compositions, and it is found to be a passive component in ice recrystallization inhibition assays, enabling retention of all activity. In the extreme case, a block copolymer with only 10% poly(vinyl alcohol) was found to retain all activity, where statistical copolymers of PVA lose all activity with very minor changes to composition. These findings present a new method to increase the complexity of antifreeze protein mimetic materials, while retaining activity, and also to help understand the underlying mechanisms of action.

Antifreeze (glyco)protein mimetic behavior of poly(vinyl alcohol): detailed structure ice recrystallization inhibition activity study.

This manuscript reports a detailed study on the ability of poly(vinyl alcohol) to act as a biomimetic surrogate for antifreeze(glyco)proteins, with a focus on the specific property of ice-recrystallization inhibition (IRI). Despite over 40 years of study, the underlying mechanisms that govern the action of biological antifreezes are still poorly understood, which is in part due to their limited availability and challenging synthesis. Poly(vinyl alcohol) (PVA) has been shown to display remarkable ice recrystallization inhibition activity despite its major structural differences to native antifreeze proteins. Here, controlled radical polymerization is used to synthesize well-defined PVA, which has enabled us to obtain the first quantitative structure-activity relationships, to probe the role of molecular weight and comonomers on IRI activity. Crucially, it was found that IRI activity is "switched on" when the polymer chain length increases from 10 and 20 repeat units. Substitution of the polymer side chains with hydrophilic or hydrophobic units was found to diminish activity. Hydrophobic modifications to the backbone were slightly more tolerated than side chain modifications, which implies an unbroken sequence of hydroxyl units is necessary for activity. These results highlight that, although hydrophobic domains are key components of IRI activity, the random inclusion of addition hydrophobic units does not guarantee an increase in activity and that the actual polymer conformation is important.

Poly(l-Ala-co-l-Lys) Exhibits Excellent Ice Recrystallization Inhibition Activity.

The control of ice recrystallization is very important in cryo-technological fields such as the food industry, biopharmaceuticals, and cell storage. Ice recrystallization inhibition (IRI) compounds are therefore designed to limit the growth of ice crystals, decrease the crystal size, and control the crystal shape. To improve the IRI activity of cryo-systems, various synthetic polymers such as biomimetic polypeptides from polar fish, facially amphiphilic polymers, polyampholytes, poly(vinyl alcohol) derivatives, and block copolymers with hydrophilic-hydrophobic balance have been developed. Except for graphene oxide, poly(vinyl alcohol) has thus far exhibited the best performance among these polymers. Herein, poly(l-alanine-co-l-lysine) (PAK) was shown to exhibit a similar IRI activity to that of poly(vinyl alcohol). Moreover, in contrast to the needle-shaped ice crystals generated by the aqueous PVA solution, the PAK solution was shown to generate cubic-to-spherical shaped ice crystals. Furthermore, neither poly(l-alanine-co-l-aspartic acid) (PAD) nor poly(ethylene glycol) (PEG) with a similar molecular weight provided any significant IRI activity. Examination by FTIR and circular dichroism spectroscopies indicated that the PAK forms α-helices, whereas the PAD forms random coils in water. Further, a dynamic ice shaping study suggested that PAK strongly interacts with ice crystals, whereas PAD and PEG only weakly interact. These results suggest that PAK is an important compound with superior IRI activity and that this activity is dependent upon the functional groups and secondary structure of the polypeptides.

Conductive and anti-freezing hydrogels constructed by pseudo-slide-ring networks.

Stretchable, tough, and anti-freezing hydrogels were prepared using partially carboxymethylated polyrotaxanes and polyacrylamides. The carboxylic acid groups of α-cyclodextrins in the polyrotaxane and the amide groups in polyacrylamide are hydrogen-bonded, affording a pseudo-slide-ring network, greatly enhancing the hydrogels' macroscale mechanical properties, anti-freezing features, and electrical conductivity for the fabrication of a cold-temperature strain sensor.

Incorporation of antifreeze proteins into polymer coatings using site-selective bioconjugation.

The diverse functional repertoire of proteins promises to yield new materials with unprecedented capabilities, so long as versatile chemical methods are available to introduce synthetic components at specific sites on biomolecule surfaces. As a demonstration of this potential, we have used site-selective strategies to attach antifreeze proteins found in Arctic fish and insects to polymer chains. This multivalent arrangement increases the thermal hysteresis activity of the proteins and leads to materials that can be cast into thin films. The polymer-protein conjugates retain the ability of the proteins to slow ice growth in subzero water and can inhibit ice formation after attachment to glass surfaces. These inexpensive materials may prove useful as coatings for device components that must function at low temperature without ice buildup. The polymer attachment also allows higher thermal hysteresis values to be achieved while using less protein, thus lowering the cost of these additives for biomedical applications.

Interaction of antifreeze proteins with hydrocarbon hydrates.

Recombinant antifreeze proteins (AFPs), representing a range of activities with respect to ice growth inhibition, were investigated for their abilities to control the crystal formation and growth of hydrocarbon hydrates. Three different AFPs were compared with two synthetic commercial inhibitors, poly-N-vinylpyrrolidone (PVP) and HIW85281, by using multiple approaches, which included gas uptake, differential scanning calorimetry (DSC) temperature ramping, and DSC isothermal observations. A new method to assess the induction period before heterogeneous nucleation and subsequent hydrate crystal growth was developed and involved the dispersal of water in the pore space of silica gel beads. Although hydrate nucleation is a complex phenomenon, we have shown that it can now be carefully quantified. The presence of AFPs delayed crystallization events and showed hydrate growth inhibition that was superior to that of one of the benchmark commercial inhibitors, PVP. Nucleation and growth inhibition were shown to be independent processes, which indicates a difference in the mechanisms required for these two inhibitory actions. In addition, there was no apparent correlation between the assayed activities of the three AFPs toward hexagonal ice and the cubic structure II (sII) hydrate, which suggests that there are distinctive differences in the protein interactions with the two crystal surfaces.

The Inhibition of Icing and Frosting on Glass Surfaces by the Coating of Polyethylene Glycol and Polypeptide Mimicking Antifreeze Protein.

The development of anti-icing, anti-frosting transparent plates is important for many reasons, such as poor visibility through the ice-covered windshields of vehicles. We have fabricated new glass surfaces coated with polypeptides which mimic a part of winter flounder antifreeze protein. We adopted glutaraldehyde and polyethylene glycol as linkers between these polypeptides and silane coupling agents applied to the glass surfaces. We have measured the contact angle, the temperature of water droplets on the cooling surfaces, and the frost weight. In addition, we have conducted surface roughness observation and surface elemental analysis. It was found that peaks in the height profile, obtained with the atomic force microscope for the polypeptide-coated surface with polyethylene glycol, were much higher than those for the surface without the polypeptide. This shows the adhesion of many polypeptide aggregates to the polyethylene glycol locally. The average supercooling temperature of the droplet for the polypeptide-coated surface with the polyethylene glycol was lower than for the polypeptide-coated surface with glutaraldehyde and the polyethylene-glycol-coated surface without the polypeptide. In addition, the average weight of frost cover on the specimen was lowest for the polypeptide-coated surface with the polyethylene glycol. These results argue for the effects of combined polyethylene glycol and polypeptide aggregates on the locations of ice nuclei and condensation droplets. Thus, this polypeptide-coating with the polyethylene glycol is a potential contender to improve the anti-icing and anti-frosting of glasses.

Inhibition of ice crystal growth by synthetic glycopolymers: implications for the rational design of antifreeze glycoprotein mimics.

A series of structurally diverse polymers, containing either peptide or vinyl-derived backbones, was tested for ice recrystallization inhibition activity, which is commonly associated with antifreeze (glyco)proteins. It was revealed that only polymers bearing hydroxyl groups in the side chain could inhibit ice growth. Furthermore, well-defined glycopolymers were shown to have a small but significant recrystallization inhibition effect, showing that it may be possible to design antifreeze glycoprotein mimics based upon polymers derived from vinyl monomers.

Parameterizations for ice nucleation in biological and atmospheric systems.

Ice nucleation is an important process in numerous environmental systems such as atmospheric aerosol droplets or biological tissues. Here we analyze two widely used approaches for describing homogeneous ice nucleation in aqueous solutions with respect to their applicability to heterogeneous ice nucleation processes: the lambda approach and the water-activity-based approach. We study experimentally the heterogeneous ice nucleation behaviour of mineral dust particles and biological ice nuclei (Snomax; Pseudomonas syringae) in aqueous solutions as a function of solute concentration for various solutes (sulfuric acid, ammonium sulfate, glucose, and poly(ethylene glycol) with two different molar masses of 400 and 6000 g mol(-1)). We show that the ice nucleation temperature and the corresponding lambda values depend on both the type of ice nucleus and the type of solute, while the water-activity-based approach depends only on the type of ice nucleus when the solution water activity is known. Finally, we employ both approaches to the study of ice nucleation in biological systems such as the supercooling point of living larvae and insects. We show that the behaviour of freeze tolerant and freeze avoiding species can be described using the two approaches and we discuss how the analysis can be used to interpret experimental results of the freezing behaviour of living species.

Mimicking the Ice Recrystallization Activity of Biological Antifreezes. When is a New Polymer "Active"?

Antifreeze proteins and ice-binding proteins have been discovered in a diverse range of extremophiles and have the ability to modulate the growth and formation of ice crystals. Considering the importance of cryoscience across transport, biomedicine, and climate science, there is significant interest in developing synthetic macromolecular mimics of antifreeze proteins, in particular to reproduce their property of ice recrystallization inhibition (IRI). This activity is a continuum rather than an "on/off" property and there may be multiple molecular mechanisms which give rise to differences in this observable property; the limiting concentrations for ice growth vary by more than a thousand between an antifreeze glycoprotein and poly(vinyl alcohol), for example. The aim of this article is to provide a concise comparison of a range of natural and synthetic materials that are known to have IRI, thus providing a guide to see if a new synthetic mimic is active or not, including emerging materials which are comparatively weak compared to antifreeze proteins, but may have technological importance. The link between activity and the mechanisms involving either ice binding or amphiphilicity is discussed and known materials assigned into classes based on this.

Electrophoresis in ice surface grooves for probing protein affinity to a specific plane of ice crystal.

Channel-like grooves are formed on the surface of frozen aqueous sucrose. They are filled with a freeze concentrated solution (FCS) and act as an efficient size-tunable separation field for micro and nanoparticles. The width of the channel can be easily varied by changing the temperature. Because the channel width decreases with decreasing temperature, particles become immobilized due to physical interference from the ice wall when the temperature reaches a threshold point specific to the particle size. Surface modification of particles can add a factor of chemical interaction between the particles and ice walls. In this study, anti-freeze proteins (AFPs) are anchored on 1µm-polystyrene (PS) particles, and their behavior in the surface grooves on the ice is studied. The threshold temperature is an effective criterion for evaluating chemical interactions between particles and ice walls. The AFP binding on 1µm PS particles lowers the threshold temperature by 2.5°C, indicating interactions between AFPs on the PS particles and the ice wall. Because the AFPs studied here show selectivity towards the prism plane, it is critical that the prism plane of the ice crystal is in contact with the FCS in the surface grooves.

Engineering amyloid fibrils from ß-solenoid proteins for biomaterials applications.

Nature provides numerous examples of self-assembly that can potentially be implemented for materials applications. Considerable attention has been given to one-dimensional cross-ß or amyloid structures that can serve as templates for wire growth or strengthen materials such as glue or cement. Here, we demonstrate controlled amyloid self-assembly based on modifications of ß-solenoid proteins. They occur naturally in several contexts (e.g., antifreeze proteins, drug resistance proteins) but do not aggregate in vivo due to capping structures or distortions at their ends. Removal of these capping structures and regularization of the ends of the spruce budworm and rye grass antifreeze proteins yield micron length amyloid fibrils with predictable heights, which can be a platform for biomaterial-based self-assembly. The design process, including all-atom molecular dynamics simulations, purification, and self-assembly procedures are described. Fibril formation with the predicted characteristics is supported by evidence from thioflavin-T fluorescence, circular dichroism, dynamic light scattering, and atomic force microscopy. Additionally, we find evidence for lateral assembly of the modified spruce budworm antifreeze fibrils with sufficient incubation time. The kinetics of polymerization are consistent with those for other amyloid formation reactions and are relatively fast due to the preformed nature of the polymerization nucleus.

Gold Nanoparticle Aggregation as a Probe of Antifreeze (Glyco) Protein-Inspired Ice Recrystallization Inhibition and Identification of New IRI Active Macromolecules.

Antifreeze (glyco)proteins are found in polar fish species and act to slow the rate of growth of ice crystals; a property known as ice recrystallization inhibition. The ability to slow ice growth is of huge technological importance especially in the cryopreservation of donor cells and tissue, but native antifreeze proteins are often not suitable, nor easily available. Therefore, the search for new materials that mimic this function is important, but currently limited by the low-throughout assays associated with the antifreeze properties. Here 30 nm gold nanoparticles are demonstrated to be useful colorimetric probes for ice recrystallization inhibition, giving a visible optical response and is compatible with 96 well plates for high-throughout studies. This method is faster, requires less infrastructure, and has easier interpretation than the currently used 'splat' methods. Using this method, a series of serum proteins were identified to have weak, but specific ice recrystallization inhibition activity, which was removed upon denaturation. It is hoped that high-throughput tools such as this will accelerate the discovery of new antifreeze mimics.