Recent Advances in the Modification and Improvement of Bioprosthetic Heart Valves.

Valvular heart disease (VHD) has become a burden and a growing public health problem in humans, causing significant morbidity and mortality worldwide. An increasing number of patients with severe VHD need to undergo heart valve replacement surgery, and artificial heart valves are in high demand. However, allogeneic valves from donors are lacking and cannot meet clinical practice needs. A mechanical heart valve can activate the coagulation pathway after contact with blood after implantation in the cardiovascular system, leading to thrombosis. Therefore, bioprosthetic heart valves (BHVs) are still a promising way to solve this problem. However, there are still challenges in the use of BHVs. For example, their longevity is still unsatisfactory due to the defects, such as thrombosis, structural valve degeneration, calcification, insufficient re-endothelialization, and the inflammatory response. Therefore, strategies and methods are needed to effectively improve the biocompatibility and longevity of BHVs. This review describes the recent research advances in BHVs and strategies to improve their biocompatibility and longevity.

Melt-electrowriting-enabled anisotropic scaffolds loaded with valve interstitial cells for heart valve tissue Engineering.

Tissue engineered heart valves (TEHVs) demonstrates the potential for tissue growth and remodel, offering particular benefit for pediatric patients. A significant challenge in designing functional TEHV lies in replicating the anisotropic mechanical properties of native valve leaflets. To establish a biomimetic TEHV model, we employed melt-electrowriting (MEW) technology to fabricate an anisotropic PCL scaffold. By integrating the anisotropic MEW-PCL scaffold with bioactive hydrogels (GelMA/ChsMA), we successfully crafted an elastic scaffold with tunable mechanical properties closely mirroring the structure and mechanical characteristics of natural heart valves. This scaffold not only supports the growth of valvular interstitial cells (VICs) within a 3D culture but also fosters the remodeling of extracellular matrix of VICs. The in vitro experiments demonstrated that the introduction of ChsMA improved the hemocompatibility and endothelialization of TEHV scaffold. The in vivo experiments revealed that, compared to their non-hydrogel counterparts, the PCL-GelMA/ChsMA scaffold, when implanted into SD rats, significantly suppressed immune reactions and calcification. In comparison with the PCL scaffold, the PCL-GelMA/ChsMA scaffold exhibited higher bioactivity and superior biocompatibility. The amalgamation of MEW technology and biomimetic design approaches provides a new paradigm for manufacturing scaffolds with highly controllable microstructures, biocompatibility, and anisotropic mechanical properties required for the fabrication of TEHVs.

Association of remaining tooth number with postoperative respiratory complications in heart valve surgery patients.

OBJECTIVES: This study examined the association between the number of remaining teeth and the incidence of postoperative respiratory complications in patients undergoing heart valve surgery. METHODS: We retrospectively enrolled 157 patients who underwent heart valve surgery between April 2010 and March 2019. Data on patient characteristics including systemic and oral conditions were extracted and postoperative respiratory complications were set as outcomes. Patients were divided into two groups according to the number of remaining teeth (≥20, <20). After adjusting for confounding factors with propensity scoring, logistic regression analysis was performed to examine the association of remaining teeth number with the incidence of postoperative respiratory complications. In addition, subgroup analysis was performed by stratifying the data into quintiles based on the propensity score. RESULTS: Univariate analysis showed significant differences between the two groups in factors, including age, past cardiac surgery experience, New York Heart Association functional classification class IV, denture use, tooth extraction before surgery, occlusal support, and periodontitis. Logistic regression analysis showed that patients with <20 remaining teeth had a significantly higher incidence of postoperative respiratory complications than those with ≥20 remaining teeth, with an odds ratio of 29.800 (p = 0.004). Subgroup analysis showed that the odds ratio for the patients with <20 remaining teeth was 9.000 (p = 0.038). CONCLUSIONS: The results suggest that heart valve surgery patients shall get attention on oral disease prevention by dental care practitioners to maintain a sufficient number of teeth for the prevention of postoperative respiratory complications.

Synthesis of High-Molecular-Weight and Strength Polyisobutylene-Based Polyurethane and Its Use for the Development of a Synthetic Heart Valve.

Under optimized synthesis conditions, for the first time, polyisobutylene-based polyurethane (PIB-PU) is prepared with 70% PIB soft segment (i.e., a bioinert and calcification-resistant PU) with Mn > 100 000 Da, 32 MPa ultimate strength, and 630% elongation. The key parameters for this achievement are a) the precise stoichiometry of the polyurethane forming reaction, specifically the use of highly purified di-isocyanate (4,4'-methylene-bis (phenyl isocyanate), MDI), and b) the increased solid content of the synthesis solution to the limit beyond which increased viscosity prevents stirring. The shape of the stress-strain trace of PIB-PU indicates a two-step failure starting with a reversible elastic (Hookean) region up to ≈50% yield, followed by a slower linearly increasing high-modulus-deformation region suggesting the strengthening of PIB soft segments by entanglement/catenation, and the hard segments by progressively ordering urethane domains. This PIB-PU is a candidate for a fully synthetic bioprosthetic heart valve since preliminary studies show that PIB-PU has impressive fatigue life.

Polymeric Heart Valves Will Displace Mechanical and Tissue Heart Valves: A New Era for the Medical Devices.

The development of a novel artificial heart valve with outstanding durability and safety has remained a challenge since the first mechanical heart valve entered the market 65 years ago. Recent progress in high-molecular compounds opened new horizons in overcoming major drawbacks of mechanical and tissue heart valves (dysfunction and failure, tissue degradation, calcification, high immunogenic potential, and high risk of thrombosis), providing new insights into the development of an ideal artificial heart valve. Polymeric heart valves can best mimic the tissue-level mechanical behavior of the native valves. This review summarizes the evolution of polymeric heart valves and the state-of-the-art approaches to their development, fabrication, and manufacturing. The review discusses the biocompatibility and durability testing of previously investigated polymeric materials and presents the most recent developments, including the first human clinical trials of LifePolymer. New promising functional polymers, nanocomposite biomaterials, and valve designs are discussed in terms of their potential application in the development of an ideal polymeric heart valve. The superiority and inferiority of nanocomposite and hybrid materials to non-modified polymers are reported. The review proposes several concepts potentially suitable to address the above-mentioned challenges arising in the R&D of polymeric heart valves from the properties, structure, and surface of polymeric materials. Additive manufacturing, nanotechnology, anisotropy control, machine learning, and advanced modeling tools have given the green light to set new directions for polymeric heart valves.

Biodegradable Poly-ε-Caprolactone Scaffolds with ECFCs and iMSCs for Tissue-Engineered Heart Valves.

Clinically used heart valve prostheses, despite their progress, are still associated with limitations. Biodegradable poly-ε-caprolactone (PCL) nanofiber scaffolds, as a matrix, were seeded with human endothelial colony-forming cells (ECFCs) and human induced-pluripotent stem cells-derived MSCs (iMSCs) for the generation of tissue-engineered heart valves. Cell adhesion, proliferation, and distribution, as well as the effects of coating PCL nanofibers, were analyzed by fluorescence microscopy and SEM. Mechanical properties of seeded PCL scaffolds were investigated under uniaxial loading. iPSCs were used to differentiate into iMSCs via mesoderm. The obtained iMSCs exhibited a comparable phenotype and surface marker expression to adult human MSCs and were capable of multilineage differentiation. EFCFs and MSCs showed good adhesion and distribution on PCL fibers, forming a closed cell cover. Coating of the fibers resulted in an increased cell number only at an early time point; from day 7 of colonization, there was no difference between cell numbers on coated and uncoated PCL fibers. The mechanical properties of PCL scaffolds under uniaxial loading were compared with native porcine pulmonary valve leaflets. The Young's modulus and mean elongation at Fmax of unseeded PCL scaffolds were comparable to those of native leaflets (p = ns.). Colonization of PCL scaffolds with human ECFCs or iMSCs did not alter these properties (p = ns.). However, the native heart valves exhibited a maximum tensile stress at a force of 1.2 ± 0.5 N, whereas it was lower in the unseeded PCL scaffolds (0.6 ± 0.0 N, p < 0.05). A closed cell layer on PCL tissues did not change the values of Fmax (ECFCs: 0.6 ± 0.1 N; iMSCs: 0.7 ± 0.1 N). Here, a successful two-phase protocol, based on the timed use of differentiation factors for efficient differentiation of human iPSCs into iMSCs, was developed. Furthermore, we demonstrated the successful colonization of a biodegradable PCL nanofiber matrix with human ECFCs and iMSCs suitable for the generation of tissue-engineered heart valves. A closed cell cover was already evident after 14 days for ECFCs and 21 days for MSCs. The PCL tissue did not show major mechanical differences compared to native heart valves, which was not altered by short-term surface colonization with human cells in the absence of an extracellular matrix.

Engineering a New Polymeric Heart Valve Using 3D Printing-TRISKELION.

Background and Objectives: Developing a prosthetic heart valve that combines the advantageous hemodynamic properties of its biological counterpart with the longevity of mechanical prostheses has been a major challenge for heart valve development. Anatomically inspired artificial polymeric heart valves have the potential to combine these beneficial properties, and innovations in 3D printing have given us the opportunity to rapidly test silicone prototypes of new designs to further the understanding of biophysical properties of artificial heart valves. TRISKELION is a promising prototype that we have developed, tested, and further improved in our institution. Materials and Methods: STL files of our prototypes were designed with FreeCad 0.19.2 and 3D printed with an Agilista 3200W (Keyence, Osaka, Japan) using silicones of Shore hardness 35 or 65. Depending on the valve type, the support structures were printed in AR-M2 plastics. The prototypes were then tested using a hemodynamic pulse duplicator (HKP 2.0) simulating an aortic valve cycle at 70 bpm with 70 mL stroke volume (cardiac output 4.9 L/min). Valve opening cycles were visualized with a high-speed camera (Phantom Miro C320). The resulting values led to further improvements of the prototype (TRISKELION) and were compared to a standard bioprosthesis (Edwards Perimount 23 mm) and a mechanical valve (Bileaflet valve, St. Jude Medical). Results: We improved the silicone prototype with currently used biological and mechanical valves measured in our setup as benchmarks. The regurgitation fractions were 22.26% ± 4.34% (TRISKELION) compared to 8.55% ± 0.22% (biological) and 13.23% ± 0.79% (mechanical). The mean systolic pressure gradient was 9.93 ± 3.22 mmHg (TRISKELION), 8.18 ± 0.65 mmHg (biological), and 10.15 ± 0.16 mmHg (mechanical). The cardiac output per minute was at 3.80 ± 0.21 L/min (TRISKELION), 4.46 ± 0.01 L/min (biological), and 4.21 ± 0.05 L/min (mechanical). Conclusions: The development of a heart valve with a central structure proves to be a promising concept. It offers another principle to address the problem of longevity in currently used heart valves. Using 3D printing to develop new prototypes provides a fast, effective, and accurate way to deepen understanding of its physical properties and requirements. This opens the door for translating and combining results into modern prototypes using highly biocompatible polymers, internal structures, and advanced valve layouts.

Proteoglycan 4 (lubricin) is a highly sialylated glycoprotein associated with cardiac valve damage in animal models of infective endocarditis.

Streptococcus gordonii and Streptococcus sanguinis are primary colonizers of tooth surfaces and are generally associated with oral health, but can also cause infective endocarditis (IE). These species express "Siglec-like" adhesins that bind sialylated glycans on host glycoproteins, which can aid the formation of infected platelet-fibrin thrombi (vegetations) on cardiac valve surfaces. We previously determined that the ability of S. gordonii to bind sialyl T-antigen (sTa) increased pathogenicity, relative to recognition of sialylated core 2 O-glycan structures, in an animal model of IE. However, it is unclear when and where the sTa structure is displayed, and which sTa-modified host factors promote valve colonization. In this study, we identified sialylated glycoproteins in the aortic valve vegetations and plasma of rat and rabbit models of this disease. Glycoproteins that display sTa vs. core 2 O-glycan structures were identified by using recombinant forms of the streptococcal Siglec-like adhesins for lectin blotting and affinity capture, and the O-linked glycans were profiled by mass spectrometry. Proteoglycan 4 (PRG4), also known as lubricin, was a major carrier of sTa in the infected vegetations. Moreover, plasma PRG4 levels were significantly higher in animals with damaged or infected valves, as compared with healthy animals. The combined results demonstrate that, in addition to platelet GPIbα, PRG4 is a highly sialylated mucin-like glycoprotein found in aortic valve vegetations and may contribute to the persistence of oral streptococci in this protected endovascular niche. Moreover, plasma PRG4 could serve as a biomarker for endocardial injury and infection.

The effect of treated apical periodontitis before heart valve surgery on C-reactive protein levels.

OBJECTIVE: Dental infections produce significant increases in systemic inflammatory responses manifested by cytokines and acute-phase reactants. This study evaluated the postoperative C-reactive protein (CRP) levels according to patients having teeth treated or not treated for apical periodontitis (AP) before heart valve surgery. MATERIALS AND METHODS: Preoperative, postoperative third- and fifth-day CRP levels, and the previous dental data of 91 patients were investigated. Whether the patients had been treated for AP and whether they used antibiotic prophylaxis for this treatment were determined by examining the previous data. The analysis of covariance (ANCOVA) was used for statistical analysis. RESULTS: There were no statistically significant differences in the preoperative CRP levels and the third-day CRP levels between all patients treated and those not treated for AP (p > .05). The mean fifth-day CRP levels of the patients with teeth treated for AP were significantly lower than those of the patients with teeth not treated for AP (p < .05). Antibiotic prophylaxis had a significant effect on the fifth-day CRP levels. CONCLUSION: The decrease in CRP levels after AP treatment may contribute to alleviating heart valve disease and maintaining cardiac health.

Effects of perioperative oral care on postoperative inflammation following heart valve surgery.

OBJECTIVE: Whether oral health care during the perioperative period can lead to a better outcome after heart valve surgery has not been adequately elucidated. We examined the effects of perioperative oral care on postoperative inflammation response in patients who underwent heart valve surgery. MATERIALS AND METHODS: In this retrospective cohort study, 223 patients scheduled for single valve heart surgery were divided into the oral care, who underwent professional teeth cleaning or scaling within 3 days prior to surgery, and also following surgery at least twice a week (n = 111), and non-oral care (n = 112) groups. After propensity score matching, records of both groups (80:80) were examined after surgery to evaluate inflammation markers (white blood cell count [WBC], neutrophil/white blood cell ratio [NWR], C-reactive protein [CRP] level, body temperature [BT]). RESULTS: WBC, NWR, CRP level, and BT were increased in both groups the day following surgery. Thereafter, CRP level, WBC, NWR, and BT on various days after surgery in the oral care group showed greater decreases as compared to the non-oral care group. CONCLUSIONS: Perioperative oral health care can decrease postoperative inflammation in patients undergoing heart valve surgery and may be important to ensure a better outcome in those patients.

Further Evolution of a New Nonbiological Transcatheter Valvular Prosthesis.

BACKGROUND: Polymeric heart valves are constructed from flexible synthetic materials, therefore aiming to combine the advantageous hemodynamic of biological and the longevity of mechanical valve prostheses. One such valve prototype in development is the PIZZA valve constructed of flexible triangular silicone leaflets on a foldable metal base for perspective transcatheter implantation. Here we present further improvements in its performance through structural modifications. METHODS: Structurally modified prototypes were constructed from silicone sheets and stainless-steel wires. Their performance was then tested in a hemodynamic testing device of the type HKP 2.0. RESULTS: Shift from a planar to a cone shape as well as overlapping of the leaflets significantly improved the valves performance, reducing regurgitation as well as systolic pressure gradients. CONCLUSIONS: The results of the modified prototypes expressed superior performance and represented a step forward on the road to an easily producible, polymeric transcatheter valvular prosthesis.

Porcine heart valve, aorta and trachea cryopreservation and thawing using polydimethylsiloxane.

The most common cryopreservation protocols of biological tissues suitable for their further implantation has some disadvantages and limited to one sample per procedure with no possible repeated freezing in case of clinical needs. This study is aimed to improve a biological tissues cryopreservation by adding a new heat transfer fluid - polydimethylsiloxane (PDMS). To evaluate its efficiency the porcine biological tissues (heart valves, aortic and trachea fragments) were cryopreserved and thawed in low-viscous PDMS. According to the computer simulation, the midsection cooling rate was up to 490 °C/min and the midsection thawing rate was up to 1140 °C/min with admissible temperature uniformity. Cryoprotectants and liquid nitrogen were not used. The quality of tissue cryopreservation was evaluated using a number of histological and immunohistochemical methods (Orcein, H&E, Anti-CD34, Anti-Vimentin, Anti-Actin staining). Cryopreserved tissues showed no significant morphological difference in comparison with control group both in case of immediate thawing, and after 2 months of low temperature storage. Computer simulation of heat transfer showed the thermal limitations of used approach for larger specimens. The use of PDMS is proposed for preservation of vascular tissue in order to implant it in the form of homotransplants or biobanking with the possible additional use of an internal hydrophilic coating to prevent hydrophobization.

Preoperative dental screening prior to cardiac valve surgery and 90-day postoperative mortality.

BACKGROUND: Preoperative dental screening before cardiac valve surgery is widely accepted but its required scope remains unclear. This study evaluates two preoperative dental screening (PDS) approaches, a focused approach (FocA) and a comprehensive approach (CompA), to compare postsurgical 90-day mortality. METHODS: Retrospective cohort analysis was performed on all patients who underwent valve surgery at Brigham and Women's Hospital with FocA and Massachusetts General Hospital with CompA of PDS approach from January 2009 to December 2016. Patients with intravenous drug abuse and systemic infections were excluded. Univariate, multivariable, and subgroup analysis was performed. RESULTS: A total of 1835 patients were included in the study. With FocA 96% of patients (1097/1143) received dental clearance in a single encounter with 3.3% receiving radiographs and undergoing dental extractions. With CompA 35.5% of patients (245/692) received dental clearance in a single encounter, 94.2% received radiographs, and 21.8% underwent dental extractions. There was no significant difference in 90-day mortality when comparing both PDS approach (10% vs 8.4%, P = .257). This remained unchanged in a multivariable model after adjusting for risk factors (odds ratio:1.32 [95%CI:0.91-1.93] [P = .14]). Reoperation due to infection was less in FocA (0.5%) vs CompA (2.6) (P < .001) and postoperative septicemia was increased in the FocA (1.7%) cohort when compared to the CompA (0.7%) (P < .001) patients. CONCLUSIONS: There was no difference in post valve surgery 90-day mortality between patients who underwent a FocA vs CompA of PDS.

Biologically Inspired Scaffolds for Heart Valve Tissue Engineering via Melt Electrowriting.

Heart valves are characterized to be highly flexible yet tough, and exhibit complex deformation characteristics such as nonlinearity, anisotropy, and viscoelasticity, which are, at best, only partially recapitulated in scaffolds for heart valve tissue engineering (HVTE). These biomechanical features are dictated by the structural properties and microarchitecture of the major tissue constituents, in particular collagen fibers. In this study, the unique capabilities of melt electrowriting (MEW) are exploited to create functional scaffolds with highly controlled fibrous microarchitectures mimicking the wavy nature of the collagen fibers and their load-dependent recruitment. Scaffolds with precisely-defined serpentine architectures reproduce the J-shaped strain stiffening, anisotropic and viscoelastic behavior of native heart valve leaflets, as demonstrated by quasistatic and dynamic mechanical characterization. They also support the growth of human vascular smooth muscle cells seeded both directly or encapsulated in fibrin, and promote the deposition of valvular extracellular matrix components. Finally, proof-of-principle MEW trileaflet valves display excellent acute hydrodynamic performance under aortic physiological conditions in a custom-made flow loop. The convergence of MEW and a biomimetic design approach enables a new paradigm for the manufacturing of scaffolds with highly controlled microarchitectures, biocompatibility, and stringent nonlinear and anisotropic mechanical properties required for HVTE.

Donkey pericardium compares favorably with commercial xenopericardia used in the manufacture of transcatheter heart valves.

Transcatheter aortic valve implantation (TAVI) has gained considerable acceptance in the past decade due to its lower risks than conventional open-heart surgery. However, the deformation and delamination of the leaflets during the crimping procedure have raised questions about the durability and long-term serviceability of the pericardium tissue from which the leaflets are made. The collagen architecture, wall thickness and mechanical properties of donkey pericardium were investigated to assess its suitability as an alternative material for the manufacture of heart valves. Coupons sampled from different locations of donkey pericardium were investigated. Bovine, equine, and porcine pericardium specimens served as controls. The donkey pericardium had a similar surface morphology to that of the control pericardia except for the wavy topology on both the fibrous and serous sides. The average thickness of donkey pericardium (ca. 120 µm) was significantly lower than that from bovine (375 µm) and equine (410 µm), but slightly higher than that from porcine (99 µm) specimens. The interlaced wavy collagen bundles in the pericardium were composed of collagen fibers about 100 nm in diameter. This unique structure ensures that the donkey pericardium has a comparable ultimate tensile strength (UTS) and a much higher failure strain than the commercial pericardia used for the manufacture of heart valves. The donkey pericardium has an organized wavy collagen bundle architecture similar to that of bovine pericardium and has a satisfactory UTS and high failure strain. The thin and strong donkey pericardium might be a good candidate valve leaflet material for TAVI.

Endothelial committed oral stem cells as modelling in the relationship between periodontal and cardiovascular disease.

In the present study we have mimicked, in vitro, an inflammatory process using Lipopolysaccharide derived from Porphyromonas Gingivalis (LPS-G) and human Periodontal Ligament Stem Cells induced to endothelial differentiation (e-hPDLSCs). The research project has been organized into the three following steps: i) induction of hPDLSCs toward endothelial differentiation; ii) evaluation of the molecular signaling pathway involved in the response to the LPS-G, and iii) functional response evaluation of the living construct constituted by porcine decellularized valve/e-hPDLSCs treated with LPS-G. Obtained results showed that 5 µg/ml LPS-G stimulus provokes: a slowdown of cell growth starting from 24 hr and the release of IL6, IL8, and MCP1 molecules. Signaling network analyzed showed the activation of TLR4/ NFkB/ERK1/2/p-ERK1/2 signaling mediated by MyD88 in LPS-G stimulated e-hPDLSCs, moreover a time course put in evidence a nuclear traslocation of ERK1/2 and p-ERK1/2 in differentiated samples. Following, the ability of e-hPDLSCs to expand and colonize the decellularized porcine heart valves was appraised at ultrastructural level. Considering that, the Reactive Oxygen Species (ROS) play an important role in the progression and development of cardiovascular disease (CVD), in LPS-G living construct model e-hPDLSCs/decellularized porcine heart valves (dPHV), ROS production was assessed. Time lapse experiments evidenced that LPS-G provokes in e-hPDLSCs a rapid and sustained increase in ROS generation, negligible on undifferentiated cells. From obtained data, by multiparametric analyses, a reasonable conclusion may be that the inflammation process activated by LPS-G can affect endothelial cells and could represent in vivo a possible pathological and predictor state of CVD.

Optimizing Glutaraldehyde-Fixed Tissue Heart Valves with Chondroitin Sulfate Hydrogel for Endothelialization and Shielding against Deterioration.

Porcine glutaraldehyde-fixed pericardium is widely used to replace human heart valves. Despite the stabilizing effects of glutaraldehyde fixation, the lack of endothelialization and the occurrence of immune reactions contribute to calcification and structural valve deterioration, which is particularly significant in young patients, in whom valve longevity is crucial. This report shows an optimization system with which to enhance endothelialization of fixed pericardium to mimic the biological function of a native heart valve. The glutaraldehyde detoxification, together with the application of a biodegradable methacrylated chondroitin sulfate hydrogel, reduces aldehydes cytotoxicity, increases the migration and proliferation of endothelial cells and the recruitment of endothelial cell progenitors, and confers thromboresistance in fixed pericardium. The combination of glutaraldehyde detoxification and a coating with chondroitin sulfate hydrogel promotes in situ mechanisms of endothelialization in fixed pericardium. We offer a new solution for improving the long life of bioprosthetic valves and exploring the means of making valves suitable to endothelialization.

Fabrication of Hydrogel Materials for Biomedical Applications.

Hydrogels are three-dimensional hydrophilic polymeric networks that can be made from a wide range of natural and synthetic polymers. This review discusses recent advanced engineering methods to fabricate hydrogels for biomedical applications with emphasis in cardiac constructs and wound healing. Layer-by-Layer (LbL) assembly offers a tissue-engineered construct with robust and highly ordered structures for cell proliferation and differentiation. Three-dimensional printings, including inkjet printing, fused deposition modeling, and stereolithographic apparatus, have been widely employed to fabricate complex structures (e.g., heart valves). Moreover, the state-of-the-art design of intelligent/stimulus-responsive hydrogels can be used for a wide range of biomedical applications, including drug delivery, glucose delivery, shape memory, wound dressings, and so on. In the future, an increasing number of hydrogels with tunable mechanical properties and versatile functions will be developed for biomedical applications by employing advanced engineering techniques with novel material design.

Contribution of Streptococcus mutans Strains with Collagen-Binding Proteins in the Presence of Serum to the Pathogenesis of Infective Endocarditis.

Streptococcus mutans, a major pathogen of dental caries, is considered one of the causative agents of infective endocarditis (IE). Recently, bacterial DNA encoding 120-kDa cell surface collagen-binding proteins (CBPs) has frequently been detected from S. mutans-positive IE patients. In addition, some of the CBP-positive S. mutans strains lacked a 190-kDa protein antigen (PA), whose absence strengthened the adhesion to and invasion of endothelial cells. The interaction between pathogenic bacteria and serum or plasma is considered an important virulence factor in developing systemic diseases; thus, we decided to analyze the pathogenesis of IE induced by S. mutans strains with different patterns of CBP and PA expression by focusing on the interaction with serum or plasma. CBP-positive (CBP+)/PA-negative (PA-) strains showed prominent aggregation in the presence of human serum or plasma, which was significantly greater than that with CBP+/PA-positive (PA+) and CBP-negative (CBP-)/PA+ strains. Aggregation of CBP+/PA- strains was also observed in the presence of a high concentration of type IV collagen, a major extracellular matrix protein in serum. In addition, aggregation of CBP+/PA- strains was drastically reduced when serum complement was inactivated. Furthermore, an ex vivo adherence model and an in vivo rat model of IE showed that extirpated heart valves infected with CBP+/PA- strains displayed prominent bacterial mass formation, which was not observed following infection with CBP+/PA+ and CBP-/PA+ strains. These results suggest that CBP+/PA-S. mutans strains utilize serum to contribute to their pathogenicity in IE.

Dental management for patients undergoing heart valve surgery.

This study sought to review current guidelines and the most optimal dental management for patients undergoing cardiac valve surgery.