A new portable vibrator for plaster pouring: effect on the marginal fit at cylinder-abutment
J. appl. oral sci
; 20(5): 517-521, Sept.-Oct. 2012. ilus, graf, tab
Article
em En
| LILACS
| ID: lil-654914
Biblioteca responsável:
BR1.1
ABSTRACT
OBJECTIVE:
The aim of this study was to test a new portable vibrator for plaster pouring (developed for this purpose), comparing the effect of its use on the accuracy of working cast of implant-supported restorations to the conventional vibrator. MATERIAL ANDMETHODS:
From a master cast with 2 implants, 30 transfer moldings were made randomly and divided into three groups Group I (GI) pouring performed in an outsourced dental laboratory with conventional plaster vibrator (10 casts), Group II (GII) pouring performed in the laboratory of the Federal University of Santa Catarina (UFSC) with conventional plaster vibrator (10 casts) and Group III (GIII) pouring performed with the portable vibrator fabricated for this study (10 casts). The position of the analogue and marginal adaptation of the infrastructure were verified by testing the single screw on the master model and on the working model. The measurement of misfit was blindly performed with a precision microscope and analyzing unit, Quadra-Check 200. The data were statistically analyzed by analysis of variance (ANOVA) and the Holm-Sidak test (α=0.05).RESULTS:
Means±standard deviations were as follows GI 19.19±4.73 µm; GII 21.72±5.41 µm; GIII 13.5±2.39 µm (P<0.05), with GIII significantly lower as compared to the other groups.CONCLUSION:
Within the limitations of this study, it was concluded that a greater accuracy of working cast was achieved when a portable vibrator was used for casting molds.Palavras-chave
Texto completo:
1
Base de dados:
LILACS
Assunto principal:
Vibração
/
Técnica de Fundição Odontológica
/
Dente Suporte
/
Adaptação Marginal Dentária
/
Prótese Dentária Fixada por Implante
/
Modelos Dentários
Tipo de estudo:
Clinical_trials
/
Evaluation_studies
/
Prognostic_studies
Idioma:
En
Revista:
J. appl. oral sci
Assunto da revista:
ODONTOLOGIA
Ano de publicação:
2012
Tipo de documento:
Article
País de afiliação:
Brasil