Electrochemical disinfection of groundwater for civil use - An example of an effective endogenous advanced oxidation process.

Lab-scale experiments using real groundwater were carried out using the CabECO® reactor system in order to evaluate its suitability for producing safe water, acceptable for civil purposes. Trials were carried out in discontinuous and in continuous mode, analyzing the influence of electrical and hydraulic process parameters on the quality of treated water. The use of highly boron-doped diamond electrodes in the reactor allowed the electrosynthesis of considerable amounts of ozone. Because of the relatively high amount of chloride in the groundwater samples, a mixture of HOCl/ClO- was also synthesized. Somewhat unexpectedly, the increase in the current density in the explored range 100-1000 A m-2 was accompanied by an increase in the faradaic yield of the electrosynthesis of oxidants, which was more pronounced for ozone than for free chlorine. As reported in literature, the main radical intermediate in the relevant reactions is OH, which can lead to different oxidation products, namely ozone and HOCl/ClO-. The electrolytic treatment also caused a decrease in the concentration of minor components, including NH4+ and Br-. Other byproducts were ClO3- and ClO4-, although their concentration levels were low. Moreover, due to alkali formation at the cathode surface, the precipitation of calcium and magnesium carbonates was also observed. In addition, the experimental investigation showed that even Pseudomonas aeruginosa and Legionella could be completely removed in the treated stream, due to the unique capacity of the reactor to synthesize biocidal agents like ozone, HOCl/ClO-, and chloramines. These effects were particularly evident during batch experiments.

A framework for the assessment of the environmental risk posed by pharmaceuticals originating from hospital effluents.

The consumption of pharmaceuticals is increasing in both hospitals and households. After administration, many compounds enter the water cycle as parent compounds or their metabolites via excretion. Conventional municipal wastewater treatment plants are unable to efficiently remove all the different compounds found in sewage and, consequently, treated effluents are one of the main sources of persistent micropollutants in the environment. Hospital patients are administered relatively high quantities of drugs and therefore hospital wastewaters can consistently contribute to treatment plant influent loads, with the magnitude of environmental risk posed by pharmaceuticals originating from hospital effluents largely unknown. This study has therefore developed a framework to enable authorities responsible for hospital management and environmental health to evaluate such risk, considering site-specific information such as the contribution of human population and hospital sizes, wastewater treatment removal efficiency, and potential dilution in the receiving water body. The framework was applied to three case studies, that are representative of frequent situations in many countries, and findings demonstrated that the degree of risk posed by any compound was site-specific and depended on a combination of several factors: compound concentration and toxicity, compound removal efficiency in the wastewater treatment plant and dilution factor. Ofloxacin, 17α-ethinylestradiol, erythromycin and sulfamethoxazole were identified as compounds of concern and might require management in order to reduce risk.