Determining Factors to Understand the External Quantum Efficiency Values: Study Carried Out with Copper(I)-I and 1,2-Bis(4-pyridyl)ethane Coordination Polymers as Downshifters in Photovoltaic Modules.

Downshifters refer to compounds with the capacity to absorb UV photons and transform them into visible light. The integration of such downshifters has the potential to improve the efficiency of commercial photovoltaic modules. Initially, costly lanthanide derivatives and organic fluorescent dyes were introduced, resulting in a heightened module efficiency. In a novel research direction guided by the same physicochemical principles, the utilization of copper(I) coordination compounds is proposed. This choice is motivated by its simpler and more economical synthesis, primarily due to copper being a more abundant and less toxic element. Our proposal involves employing 1,2-bis(4-pyridyl) ethane (bpe), an economically viable commercial ligand, in conjunction with CuI to synthesize coordination polymers: [CuI(bpe)]n(1), [Cu3I3(bpe)3]n(2), and [CuI(bpe)0.5]n(3). These polymers exhibit the ability to absorb UV photons and emit light within the green and orange spectra. To conduct external quantum efficiency studies, the compounds are dispersed on glass and then encapsulated with ethylene vinyl acetate through heating to 150 °C. Interestingly, during these procedural steps, the solvents and temperatures employed induce a phase transformation, which has been thoroughly examined through both experimental analysis and theoretical calculations. The outcomes of these studies reveal an enhancement in external quantum efficiency with [Cu3I3(bpe)3]n(2), at a cost significantly lower (between 340 and 350 times) than that associated with lanthanide DS complexes.

2D Cu(I)-I Coordination Polymer with Smart Optoelectronic Properties and Photocatalytic Activity as a Versatile Multifunctional Material.

This work presents two isostructural Cu(I)-I 2-fluoropyrazine (Fpyz) luminescent and semiconducting 2D coordination polymers (CPs). Hydrothermal synthesis allows the growth of P-1 space group single crystals, whereas solvent-free synthesis produces polycrystals. Via recrystallization in acetonitrile, P21 space group single crystals are obtained. Both show a reversible luminescent response to temperature and pressure. Structure determination by single-crystal X-ray diffraction at 200 and 100 K allows us to understand their response as a function of temperature. Applying hydrostatic/uniaxial pressure or grinding also generates significant variations in their emission. The high structural flexibility of the Cu(I)-I chain is significantly linked to the corresponding alterations in structure. Remarkably, pressure can increase the conductivity by up to 3 orders of magnitude. Variations in resistivity are consistent with changes in the band gap energy. The experimental results are in agreement with the DFT calculations. These properties may allow the use of these CPs as optical pressure or temperature sensors. In addition, their behavior as a heterogeneous photocatalyst of persistent organic dyes has also been investigated.

New Promises and Opportunities in 3D Printable Inks Based on Coordination Compounds for the Creation of Objects with Multiple Applications.

This review focuses on the usefulness of coordination bonds to create 3D printable inks and shows how the union of chemistry and 3D technology contributes to new scientific advances, by allowing amorphous or polycrystalline solids to be transformed into objects with the desired shape for successful applications. The review clearly shows how there has been considerable increase in the manufacture of objects based on the combination of organic matrices and coordination compounds. These coordination compounds are usually homogeneously dispersed within the matrix, anchored onto a proper support or coating the printed object, without destroying their unique properties. Advances are so rapid that today it is already possible to 3D print objects made exclusively from coordination compounds without additives. The new printable inks are made mainly with nanoscale nonporous coordination polymers, metal-organic gels, or metal-organic frameworks. The highly dynamic coordination bond allows the creation of objects, which respond to stimuli, that can act as sensors and be used for drug delivery. In addition, the combination of metal-organic frameworks with 3D printing allows the adsorption or selective capacity of the object to be increased, relative to that of the original compound, which is useful in energy storage, gas separation, or water pollutant elimination. Furthermore, the presence of the metal ion can give them new properties, such as luminescence, that are useful for application in sensors or anticounterfeiting. Technological advances, the combination of various printing techniques, and the properties of coordination bonds lead to the creation of surprising, new, printable inks and objects with highly complex shapes that will close the gap between academia and industry for research into coordination compounds.

Cu(I)-I-2,4-diaminopyrimidine Coordination Polymers with Optoelectronic Properties as a Proof of Concept for Solar Cells.

Two coordination polymers with formulas [CuI(dapym)]n and [Cu2I2(dapym)]n (dapym = 2,4-diaminopyrimidine) have been synthesized in water at room temperature. According to the stoichiometry used, mono (1D) and the two-dimensional (2D) structures can be obtained. Both are made up of Cu2I2 double chains. Their high insolubility in the reaction medium also makes it possible to obtain them on a nanometric scale. Their structural flexibility and short Cu-Cu distances provoke interesting optoelectronic properties and respond to physical stimuli such as pressure and temperature, making them interesting for sensor applications. The experimental and theoretical studies allow us to propose different emission mechanisms with different behaviors despite containing the same organic ligand. These behaviors are attributed to their structural differences. The emission spectra versus pressure and temperature suggest competencies between different transitions, founding critical Cu2I2 environments, i.e., symmetric in the 1D compound and asymmetric for the 2D one. The intensity in the 2D compound's emission increases with decreasing temperature, and this behavior can be rationalized with a structural constriction that decreases the Cu-Cu and Cu-I distances. However, compound 1D exhibits a contrary behavior that may be related to a change of the organic ligand's molecular configuration. These changes imply that a more significant Π-Π interaction counteracts the contraction in distances and angles when the temperature decreased. Also, the experimental conductivity measurements and theoretical calculations show a semiconductor behavior. The absorption of the 1D compound in UV, its intense emission at room temperature, and the reduction to nanometric size have allowed us to combine it homogeneously with ethyl vinyl acetate (EVA), creating a new composite material. The external quantum efficiency of this material in a Si photovoltaic mini-module has shown that this compound is an active species with application in solar cells since it can move the photons of the incident radiation (UV region) to longer wavelengths.

Multifunctional Copper(I) Coordination Polymers with Aromatic Mono- and Ditopic Thioamides.

Direct reactions under ambient conditions between CuX (X = Br, I) and thiobenzamide (TBA) were carried out at different ratios, giving rise to the formation of a series of one-dimensional (1D) coordination polymers, (CPs) [CuI(TBA)] n (1), [Cu3I3(TBA)2] n (4), and [CuBr(TBA)] n (5), as well as two molecular complexes, [CuI(TBA)3] (2) and [Cu2I2(TBA)4]·2MeCN (3). Recrystallization of 1 and 5 yielded a series of isostructural 1D CP solvated species, [CuI(TBA)·S] n] n (1·S; S = tetrahydrofuran, acetone, methanol) and [CuBr(TBA)·S] n (5·S; S = tetrahydrofuran, acetone), respectively. Similar reactions between CuI and 1,4-dithiobenzamide (DTBA) allowed the isolation of a series of two-dimensional (2D) CPs [CuI(DTBA)·S] n (6·S; S = N, N-dimethylformamide, acetonitrile, methanol). Interestingly, 1·S and 5·S showed variable luminescence and electrical semiconductivity depending on the different solvents located in their structures. Thus, 1 and 5 could display potential application for sensing volatile organic vapors by virtue of the significant changes in their emission upon solvent exposure, even by the naked eye. Theoretical calculations have been used to rationalize these electronic properties.

Unprecedented Centimeter-Long Carbon Nitride Needles: Synthesis, Characterization and Applications.

Free standing centimeter-long 1D nanostructures are highly attractive for electronic and optoelectronic devices due to their unique photophysical and electrical properties. Here a simple, large-scale synthesis of centimeter-long 1D carbon nitride (CN) needles with tunable photophysical, electric, and catalytic properties is reported. Successful growth of ultralong needles is acquired by the utilization of 1D organic crystal precursors comprised of CN monomers as reactants. Upon calcination at high temperatures, the shape of the starting crystal is fully preserved while the CN composition and porosity, and optical and electrical properties can be easily tuned by tailoring the starting elements ratio and final calcination temperature. The facile manipulation and visualization of the CN needles endow their direct electrical measurements by placing them between two conductive probes. Moreover, the CN needles exhibit good photocatalytic activity for hydrogen production owing to their improved light harvesting properties, high surface area, and advantageous energy bands position. The new growth strategy developed here may open opportunities for a rational design of CN and other metal-free materials with controllable directionality and tunable photophysical and electronic properties, toward their utilization in (photo)electronic devices.

Supramolecular Interactions Modulating Electrical Conductivity and Nanoprocessing of Copper-Iodine Double-Chain Coordination Polymers.

Two coordination polymers (CPs), based on Cu(I)-I double zig-zag chains bearing isonicotinic acid or 3-chloroisonicotinic acid as terminal ligands with molecular recognition capabilities, have been synthesized and fully characterized. Both compounds present extended networks with supramolecular interactions directed by the formation of H-bonds between the complementary carboxylic groups, giving supramolecular sheets. The chloro substituent allows establishing additional Cl···Cl supramolecular interactions that reinforce the stability of the supramolecular sheets. These CPs are semiconductor materials; however, the presence of chlorine produces slight changes in the I-Cu-I chains, generating a worse overlap in the Cu-I orbitals, thus determining a decrease in its electrical conductivity value. These experimental results have also been corroborated by theoretical calculations using the study of the morphology of the density of states and 3D orbital isodensities, which determine that conductivity is mostly produced through the Cu-I skeleton and is less efficient in the case of the chloro derivative compound. A fast and efficient bottom-up approach based on the self-assembly of the initial building blocks and the low solutibility of these CPs has proved very useful for the production of nanostructures.

Copper(II)-Thymine Coordination Polymer Nanoribbons as Potential Oligonucleotide Nanocarriers.

The direct reaction between copper nitrate, thymine-1-acetic acid, and 4,4'-bipyridine in water leads to the formation of a blue colloid comprising uniform crystalline nanoribbons (length >1 µm; width ca. 150-185 nm; diameter ca. 15-60 nm) of a coordination polymer. The polymer displays a thymine-based structure freely available for supramolecular interactions. These nanostructures show significant selective interaction with single-stranded oligonucleotides based on adenine. Remarkably, they present low cell toxicity in three cell lines-despite the copper(II) content-and can be used as nanocarriers of oligonucleotides. These results suggest the potential of these types of nanostructures in several biological applications.

Luminescent Thermochromism of 2D Coordination Polymers Based on Copper(I) Halides with 4-Hydroxythiophenol.

Solvothermal reactions between copper(I) halides and 4-mercaptophenol give rise to the formation of three coordination polymers with general formula [Cu3 X(HT)2 ]n (X=Cl, 1; Br, 2; and I, 3). The structures of these coordination polymers have been determined by X-ray diffraction at both room- and low temperature (110 K), showing a general shortening in Cu-S, Cu-X and Cu-Cu bond lengths at low temperatures. 1 and 2 are isostructural, consisting of layers in which the halogen ligands act as µ3 -bridges joining two Cu1 and one Cu2 atoms whereas in 3 the iodine ligands is as µ4 -mode but the layers are quasi-isostructural with 1 or 2. These compounds show a reversible thermochromic luminescence, with strong orange emission for 1 and 2, but weaker for 3 at room temperature, whereas upon cooling at 77 K 1 and 2 show stronger yellow emission, and 3 displays stronger green emission. DFT calculations have been used to rationalize these observations. These results suggest a high potential for this novel and promising stimuli-responsive materials.

Electrical Conductivity and Strong Luminescence in Copper Iodide Double Chains with Isonicotinato Derivatives.

Direct reactions between CuI and isonicotinic acid (HIN) or the corresponding esters, ethyl isonicotinate (EtIN) or methyl isonicotinate (MeIN), give rise to the formation of the coordination polymers [CuI(L)]n with L=EtIN (1), MeIN (2) and HIN (3). Polymers 1-3 show similar structures based on a CuI double chain in which ethyl-, methyl isonicotinate or isonicotinic acid are coordinated as terminal ligands. Albeit, their supramolecular architecture differs considerably, affecting the distances and angles of the central CuI double chains and thereby their physical properties. Hence, the photoluminescence shows remarkable differences; 1 and 2 show a strong yellow emission, whereas 3 displays a weak emission; and 1 and 2 are semiconductors with moderate room temperature conductivities, whereas 3 has increased electrical conductivity up to 3×10(-3)  S cm(-1) . Additionally, 1 and 2 present an irreversible transition to a highly conducting phase with a conductivity almost 4 orders of magnitude higher and a quasi-metallic behaviour. Thermogravimetric analysis (TGA) coupled to a mass spectrometer and magnetic measurements point to a partial thermally induced oxidation of the carboxylate groups of the ligands with Cu(I) to Cu(0) reduction. DFT calculations have been carried out to rationalise these observations.

Substituent and noncovalent interaction effects in the reactivity of purine derivatives with tetracarboxylato-dirhodium(II) units. Rationalization of a rare binding mode via N3.

Reactions between [Rh(2)(CH(3)COO)(4)] with 2,6-diaminopurine (HDap) or 6-chloro-2-aminopurine (HClap) and [Rh(2)((CH(3))(3)CCOO)(4)] with HClap produce, three new dirhodium(II) carboxylate complexes of the general form, [Rh(2)(RCOO)(4)(Purine)(2)] (R = CH(3), (CH(3))(3)C). Single crystal X-ray diffraction studies confirm that in all cases the purine coordinates to the axial position of the dirhodium(II)tetracarboxylate unit. However, while the complex obtained with HDap features the typical purine binding mode via N(7), complexes containing HClap show unusual N3 coordination. This is an extremely rare instance of an unrestricted purine binding via N3. Some rationalization of these data is offered based on a series of DFT calculations.

Electrical bistability around room temperature in an unprecedented one-dimensional coordination magnetic polymer.

The synthesis, crystal structure, and physical properties of an unprecedented one-dimensional (1D) coordination polymer containing [Fe2(S2C6H2Cl2)4](2-) entities bridged by dicationic [K2(µ-H2O)2(THF)4](2+) units are described. The magnetic properties show that the title compound presents pairwise Fe-Fe antiferromagnetic interactions that can be well reproduced with a S = 1/2 dimer model with an exchange coupling, J = -23 cm(-1). The electrical conductivity measurements show that the title compound is a semiconductor with an activation energy of about 290 meV and two different transitions, both with large hysteresis of about 60 and 30 K at 260-320 K and 350-380 K, respectively. These two transitions are assumed to be due to slight structural changes in the cation-anion interactions. Differential Scanning Calorimetry confirms the presence of both transitions. This compound represents the first sample of a coordination polymer showing electrical bistability.

Semiconductive and magnetic one-dimensional coordination polymers of Cu(II) with modified nucleobases.

Four new copper(II) coordination complexes, obtained by reaction of CuX2 (X = acetate or chloride) with thymine-1-acetic acid and uracil-1-propionic acid as ligands, of formulas [Cu(TAcO)2(H2O)4]·4H2O (1), [Cu(TAcO)2(H2O)2]n (2), [Cu3(TAcO)4(H2O)2(OH)2]n·4H2O (3), and [Cu3(UPrO)2Cl2(OH)2(H2O)2]n (4) (TAcOH = thymine-1-acetic acid, UPrOH = uracil-1-propionic acid) are described. While 1 is a discrete complex, 2-4 are one-dimensional coordination polymers. Complexes 2-4 present dc conductivity values between 10(-6) and 10(-9) S/cm(-1). The magnetic behavior of complex 2 is typical for almost isolated Cu(II) metal centers. Moderate-weak antiferromagnetic interactions have been found in complex 3, whereas a combination of strong and weak antiferromagnetic interactions have been found in complex 4. Quantum computational calculations have been done to estimate the individual "J" magnetic coupling constant for each superexchange pathway in complexes 3 and 4. Compounds 2-4 are the first known examples of semiconductor and magnetic coordination polymers containing nucleobases.

Coordination chemistry of 6-thioguanine derivatives with cobalt: toward formation of electrical conductive one-dimensional coordination polymers.

In this work we have synthetized and characterized by X-ray diffraction five cobalt complexes with 6-thioguanine (6-ThioGH), 6-thioguanosine (6-ThioGuoH), or 2'-deoxy-6-thioguanosine (2'-d-6-ThioGuoH) ligands. In all cases, these ligands coordinate to cobalt via N7 and S6 forming a chelate ring. However, independently of reagents ratio, 6-ThioGH provided monodimensional cobalt(II) coordination polymers, in which the 6-ThioG(-) acts as bridging ligand. However, for 2'-d-6-ThioGuoH and 6-ThioGuoH, the structure directing effect of the sugar residue gives rise to mononuclear cobalt complexes which form extensive H-bond interactions to generate 3D supramolecular networks. Furthermore, with 2'-d-6-ThioGuoH the cobalt ion remains in the divalent state, whereas with 6-ThioGuoH oxidation occurs and Co(III) is found. The electrical and magnetic properties of the coordination polymers isolated have been studied and the results discussed with the aid of DFT calculations, in the context of molecular wires.

Electrical conductive coordination polymers.

Coordination polymers are currently one of the hottest topics in Inorganic and Supramolecular Chemistry. This critical review summarizes the current state-of-the-art on electrical conductive coordination polymers (CPs), also named metal-organic frameworks (MOFs). The data were collected following two sort criteria of the CPs structure: dimensionality and bridging ligands (151 references).

Structural and Theoretical Study of Copper(II)-5-fluoro Uracil Acetate Coordination Compounds: Single-Crystal to Single-Crystal Transformation as Possible Humidity Sensor.

This paper describes the synthesis and characterization of seven different copper(II) coordination compounds, as well as the formation of a protonated ligand involving all compounds from the same reaction. Their synthesis required hydrothermal conditions, causing the partial in situ transformation of 5-fluoro uracil-1-acetic acid (5-FUA) into an oxalate ion (ox), as well as the protonation of the 4,4'-bipyridine (bipy) ligand through a catalytic process resulting from the presence of Cu(II) within the reaction. These initial conditions allowed obtaining the new coordination compounds [Cu2(5-FUA)2(ox)(bipy)]n·2n H2O (CP2), [Cu(5-FUA)2(H2O)(bipy)]n·2n H2O (CP3), as well as the ionic pair [(H2bipy)+2 2NO3-] (1). The mother liquor evolved rapidly at room temperature and atmospheric pressure, due to the change in concentration of the initial reagents and the presence of the new chemical species generated in the reaction process, yielding CPs [Cu(5-FUA)2(bipy)]n·3.5n H2O, [Cu3(ox)3(bipy)4]n and [Cu(ox)(bipy)]n. The molecular compound [Cu(5-FUA)2(H2O)4]·4H2O (more thermodynamically stable) ended up in the mother liquor after filtration at longer reaction times at 25 °C and 1 atm., cohabiting in the medium with the other crystalline solids in different proportions. In addition, the evaporation of H2O caused the single-crystal to single-crystal transformation (SCSC) of [Cu(5-FUA)2(H2O)(bipy)]n·2n H2O (CP3) into [Cu(5-FUA)2(bipy)]n·2n H2O (CP4). A theoretical study was performed to analyze the thermodynamic stability of the phases. The observed SCSC transformation also involved a perceptible color change, highlighting this compound as a possible water sensor.

The Methylene Spacer Matters: The Structural and Luminescent Effects of Positional Isomerism of n-Methylpyridyltriazole Carboxylate Semi-Rigid Ligands in the Structure of Zn(II) Based Coordination Polymers.

Two Zn(II) coordination polymers (CPs) based on n-methylpyridyltriazole carboxylate semi-rigid organic ligands (n-MPTC), with n = 3 (L1) and 4 (L2), have been prepared at the water n-butanol interphase by reacting Zn(NO3)2·4H2O with NaL1 and NaL2. This allows us to systematically investigate the influence of the isomeric positional effect on their structures. The organic ligands were obtained by saponification from their respective ester precursors ethyl-5-methyl-1-(pyridin-3-ylmethyl)-1H-1,2,3-triazole-4-carboxylate (P1) and ethyl-5-methyl-1-(pyridin-4-ylmethyl)-1H-1,2,3-triazole-4-carboxylate (P2), resulting in their corresponding sodium salt forms, 3-MPTC, and 4-MPTC. The structure of the Zn(II) CPs determined by single-crystal X-ray diffraction reveals that both CPs have 2D supramolecular hydrogen bond networks. The 2D supramolecular network of [Zn(L1)]n (1) is built up by hydrogen bond interactions between oxygen and hydrogen atoms between neighboring n-methylpyridyltriazole molecules, whereas in [Zn(L2)·4H2O]n (2) the water molecules link 1D polymeric chains forming a 2D supramolecular aggregate. The structures of 1 and 2 clearly show that the isomeric effect in the semi-rigid ligands plays a vital role in constructing the Zn(II) coordination polymers, helped by the presence of the methylene spacer group, in the final structural conformation. The structures of 1 and 2 significantly affect their luminescent properties. Thus, while 2 shows strong emission at room temperature centered at 367 nm, the emission of 1 is quenched substantially.

Structure and properties of one-dimensional heterobimetallic polymers containing dicyanoaurate and dirhodium(II) fragments.

The synthesis and characterization of compound [Rh(2)(O(2)CEt)(4)(H(2)O)(2)] (1) and one-dimensional heterobimetallic polymers K(n){Rh(2)(O(2)CEt)(4)[Au(CN)(2)]}(n) (2) and K(n){Rh(2)(O(2)CMe)(4)[Au(CN)(2)]}(n)·4nH(2)O (3), constructed from dirhodiumtetracarboxylato units, [Rh(2)(O(2)CR)(4)](+), and dicyanoaurate, [Au(CN)(2)](-), fragments are described. In both compounds 2 and 3 the resulting polymeric chains are nonlinear and have in common similar structural parameters, although the solid state supramolecular arrangement is very different. These structural differences explain the fact that complex 2 displays aurophilic interactions while this type of interactions are absent in complex 3. As a result, compound 2 shows rich blue luminescent properties whereas compound 3 is not luminescent. The electrical conductivity in solid state of compounds 2 and 3 is also studied.

A Nanostructured Cu(II) Coordination Polymer Based on Alanine as a Trifunctional Mimic Enzyme and Efficient Composite in the Detection of Sphingobacteria.

This research raises the potential use of coordination polymers as new useful materials in two essential research fields, allowing the obtaining of a new multiartificial enzyme with the capacity to inhibit the growth of bacteria resistance. The fine selection of the ligands allows the design of a new 2D coordination polymer (CP), with the formula [Cu2(IBA)2(OH2)4]n·6nH2O, by the combination of Cu (II) as the metal center with a pseudoamino acid (H2IBA = isophthaloyl bis ß-alanine). Quantitative total X-ray fluorescence (TXRF) analyses show that the obtained CP can gradually release Cu (II) ions. Additionally, this CP can be nanoprocessed and transformed into a metal-organic gel (MOG) by using different Cu (II) salt concentrations and the application of ultrasounds. Considering its nanometric dimensions, the slow Cu (II) release and its simple processability, its performance as an artificial enzyme, and its antibacterial ability were explored. The results obtained show the first nanocoordination polymer acting as an artificial multienzyme (peroxidase, catalase, and superoxodismutase) exhibiting antibacterial activity in the presence of hydrogen peroxide, with selective behavior for three bacterium strains (S. spiritovirum, A. faecales, and B. cereus). Indeed, this CP shows a more robust inhibition capacity for Sphingobacterium. Going beyond that, as there are no comfortable and practically clinical tests capable of detecting the presence of Sphingobacteria, the compound can be easily embedded to form moldable gelatin that will facilitate the handling and low-cost commercial kits.

Innovative Microstructural Transformation upon CO2 Supercritical Conditions on Metal-Nucleobase Aerogel and Its Use as Effective Filler for HPLC Biomolecules Separation.

This work contributes to enlightening the opportunities of the anisotropic scheme of non-covalent interactions present in supramolecular materials. It provides a top-down approach based on their selective disruption that herein has been employed to process a conventional microcrystalline material to a nanofibrillar porous material. The developed bulk microcrystalline material contains uracil-1-propionic acid (UPrOH) nucleobase as a molecular recognition capable building block. Its crystal structure consists of discrete [Cu(UPrO)2 (4,4'-bipy)2 (H2 O)] (4,4'-bipy=4,4'-bipyridine) entities held together through a highly anisotropic scheme of non-covalent interactions in which strong hydrogen bonds involving coordinated water molecules provide 1D supramolecular chains interacting between them by weaker interactions. The sonication of this microcrystalline material and heating at 45 °C in acetic acid-methanol allows partial reversible solubilization/recrystallization processes that promote the cross-linking of particles into an interlocked platelet-like micro-particles metal-organic gel, but during CO2 supercritical drying, the microcrystalline particles undergo a complete morphological change towards highly anisotropic nanofibers. This unprecedented top-down microstructural conversion provides a nanofibrillar material bearing the same crystal structure but with a highly increased surface area. Its usefulness has been tested for HPLC separation purposes observing the expected nucleobase complementarity-based separation.