Learning from Safe-by-Design for Safe-and-Sustainable-by-Design: Mapping the current landscape of Safe-by-Design reviews, case studies, and frameworks.

With the introduction of the European Commission's "Safe and Sustainable-by-Design" (SSbD) framework, the interest in understanding the implications of safety and sustainability assessments of chemicals, materials, and processes at early-innovation stages has skyrocketed. Our study focuses on the "Safe-by-Design" (SbD) approach from the nanomaterials sector, which predates the SSbD framework. In this assessment, SbD studies have been compiled and categorized into reviews, case studies, and frameworks. Reviews of SbD tools have been further classified as quantitative, qualitative, or toolboxes and repositories. We assessed the SbD case studies and classified them into three categories: safe(r)-by-modeling, safe(r)-by-selection, or safe(r)-by-redesign. This classification enabled us to understand past SbD work and subsequently use it to define future SSbD work so as to avoid confusion and possibilities of "SSbD-washing" (similar to greenwashing). Finally, the preexisting SbD frameworks have been studied and contextualized against the SSbD framework. Several key recommendations for SSbD based on our analysis can be made. Knowledge gained from existing approaches such as SbD, green and sustainable chemistry, and benign-by-design approaches needs to be preserved and effectively transferred to SSbD. Better incorporation of chemical and material functionality into the SSbD framework is required. The concept of lifecycle thinking and the stage-gate innovation model need to be reconciled for SSbD. The development of high-throughput screening models is critical for the operationalization of SSbD. We conclude that the rapid pace of both SbD and SSbD development necessitates a regular mapping of the newly published literature that is relevant to this field.

Overall comparison and source identification of PAHs in the sediments of European Baltic and North Seas, Chinese Bohai and Yellow Seas.

An international sampling campaign was carried out to comprehensively investigate the occurrence of polycyclic aromatic hydrocarbons (PAHs) in the marine sediments from the European Baltic and North Seas, Chinese Bohai and Yellow Seas. The concentrations of ∑18PAHs in the samples from these four seas were in the range of 0.91-5361 ng/g dry weight (dw), 0.46-227 ng/g dw, 25.0-308 ng/g dw and 4.3-659 ng/g dw, respectively. 4-rings PAHs, e.g., fluoranthene, pyrene and benzo(b)fluoranthene, were commonly the dominant compounds in all the samples. The PAH sources were identified via composition patterns, diagnostic ratios, principal component analysis (PCA) and positive matrix factorization (PMF). Coal combustion, vehicular emission, coke plant and petroleum residue were apportioned as the main sources in these marine sediments. However, through PMF modeling, different contributions of these sources were quantified to the deposited PAHs in the seas, suggesting distinct anthropogenic impacts on the adjacent marine system. It is note-worthy that biomass combustion may not be the main source of PAHs in the majority of sediments from these seas. This was evidenced by the ratios of naphthalene against its methylated derivatives (i.e. 1-,2-methylnaphthalenes) other than the composition pattern in the samples, of which the approach is in prospect of developing in future studies.

Emerging per- and polyfluoroalkyl substances (PFASs) in surface water and sediment of the North and Baltic Seas.

Along with the phase-out of legacy long-chain perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkane sulfonic acids (PFSAs) and their precursors, attention has been drawn to emerging per- and polyfluoroalkyl substances (PFASs). This study is aimed at investigating the importance of selected emerging PFASs as pollutants in European coastal environments and a possible transition from legacy long-chain PFCAs and PFSAs to replacement compounds. Therefore, the spatial distribution of 29 PFASs was analysed in surface water and sediment of the North and Baltic Seas sampled in 2017. Levels of the replacement compound HFPO-DA were approximately three times higher than those of its predecessor PFOA in surface water from the North Sea, which is characterised by the influence of point sources and constant exchange with open water. Reanalysis of sample extracts from the last decade showed that HFPO-DA had already been present in 2011, when it had not yet been in focus. In the Baltic Sea with a limited water exchange and dominance of diffuse sources, the proportion of HFPO-DA was negligible, whereas long-chain PFCAs and PFSAs still contributed to ∑PFASs with about 30%. The emerging cyclic compound perfluoro-4-ethylcyclohexanesulfonate (PFECHS), which has not yet been reported in European coastal environments, was detected in 86% of the Baltic Sea samples. Influenced by sediment characteristics in addition to source-specific contributions, the spatial distribution of PFASs in surface sediments was more variable than for water samples. The linear isomer of the long-chain legacy substance PFOS was the predominant compound found over the entire study area. Of the emerging PFASs, 6:6 and 6:8 perfluoroalkyl phosphinic acids (PFPiAs) were identified close to potential industrial inputs and in sedimentation areas. The results show that particular emerging PFASs play a relevant role in the investigated coastal environments and that a shift to replacements is dependent on sources and geographical conditions.

Environmental occurrence and hazard of organic UV stabilizers and UV filters in the sediment of European North and Baltic Seas.

UV absorbing compounds are of emerging concern due to their large production volumes, their persistence or pseudo-persistence, and their potential adverse effects. This is the first study investigating the environmental occurrence and potential hazard of organic UV stabilizers and UV filters in the North and Baltic Sea surface sediments, including the connecting Skagerrak and Kattegat straits. In total, nineteen substances were identified over the entire study area, including the rarely studied compounds ethylhexyl triazone (EHT) and bisoctrizole (UV-360). Octocrylene (OC) was the predominant compound in this study with regard to detection frequency (79%) and concentrations (up to 9.7 ng/g dw). OC accounted for more than 65% of UV stabilizer contamination in the German Bight. The triazine derivative EHT was quantified in the Rhine-Meuse-Delta and the German Bight in concentrations up to 2.0 ng/g dw. In the Baltic Sea, benzotriazole UV stabilizers accounted for 60% of the contamination, with UV-360 as the main substance. The estimated environmental hazard quotients indicated a negligible impact on benthic and sediment-dwelling organisms in the North and Baltic Seas. Region-specific contamination pattern and riverine influences were revealed. The results suggest that both direct and indirect sources contribute to the UV stabilizer and UV filter contamination in the study area.

Environmental occurrence and distribution of organic UV stabilizers and UV filters in the sediment of Chinese Bohai and Yellow Seas.

Organic UV stabilizers and UV filters are applied to industrial materials and cosmetics worldwide. In plastics they prevent photo-induced degradation, while in cosmetics they protect human skin against harmful effects of UV radiation. This study reports on the occurrence and distribution of organic UV stabilizers and UV filters in the surface sediment of the Chinese Bohai and Yellow Seas for the first time. In total, 16 out of 21 analyzed substances were positively detected. Concentrations ranged from sub-ng/g dw to low ng/g dw. The highest concentration of 25 ng/g dw was found for octocrylene (OC) in the Laizhou Bay. In the study area, characteristic composition profiles could be identified. In Korea Bay, the dominating substances were OC and ethylhexyl salicylate (EHS). All other analytes were below their method quantification limit (MQL). Around the Shandong Peninsula, highest concentrations of benzotriazole derivatives were observed in this study with octrizole (UV-329) as the predominant compound, reaching concentrations of 6.09 ng/g dw. The distribution pattern of UV-329 and bumetrizole (UV-326) were related (Pearson correlation coefficient r > 0.98, p « 0.01 around the Shandong Peninsula), indicating an identical input pathway and similar environmental behavior.