Assessing the antimicrobial activity of polyisoprene based surfaces.

There has been an intense research effort in the last decades in the field of biofouling prevention as it concerns many aspects of everyday life and causes problems to devices, the environment, and human health. Many different antifouling and antimicrobial materials have been developed to struggle against bacteria and other micro- and macro-organism attachment to different surfaces. However the "miracle solution" has still to be found. The research presented here concerns the synthesis of bio-based polymeric materials and the biological tests that showed their antifouling and, at the same time, antibacterial activity. The raw material used for the coating synthesis was natural rubber. The polyisoprene chains were fragmented to obtain oligomers, which had reactive chemical groups at their chain ends, therefore they could be modified to insert polymerizable and biocidal groups. Films were obtained by radical photopolymerization of the natural rubber derived oligomers and their structure was altered, in order to understand the mechanism of attachment inhibition and to increase the efficiency of the anti-biofouling action. The adhesion of three species of pathogenic bacteria and six strains of marine bacteria was studied. The coatings were able to inhibit bacterial attachment by contact, as it was verified that no detectable leaching of toxic molecules occurred.

Antimicrobial properties of a nanostructured eggshell from a compost-nesting bird.

Infection is an important source of mortality for avian embryos but parental behaviors and eggs themselves can provide a network of antimicrobial defenses. Mound builders (Aves: Megapodiidae) are unique among birds in that they produce heat for developing embryos not by sitting on eggs but by burying them in carefully tended mounds of soil and microbially decomposing vegetation. The low infection rate of eggs of one species in particular, the Australian brush-turkey (Alectura lathami), suggests that they possess strong defensive mechanisms. To identify some of these mechanisms, we first quantified antimicrobial albumen proteins and characterized eggshell structure, finding that albumen was not unusually antimicrobial, but that eggshell cuticle was composed of nanometer-sized calcite spheres. Experimental tests revealed that these modified eggshells were significantly more hydrophobic and better at preventing bacterial attachment and penetration into the egg contents than chicken eggs. Our results suggest that these mechanisms may contribute to the antimicrobial defense system of these eggs, and may provide inspiration for new biomimetic anti-fouling surfaces.

Marennine, promising blue pigments from a widespread Haslea diatom species complex.

In diatoms, the main photosynthetic pigments are chlorophylls a and c, fucoxanthin, diadinoxanthin and diatoxanthin. The marine pennate diatom Haslea ostrearia has long been known for producing, in addition to these generic pigments, a water-soluble blue pigment, marennine. This pigment, responsible for the greening of oysters in western France, presents different biological activities: allelopathic, antioxidant, antibacterial, antiviral, and growth-inhibiting. A method to extract and purify marennine has been developed, but its chemical structure could hitherto not be resolved. For decades, H. ostrearia was the only organism known to produce marennine, and can be found worldwide. Our knowledge about H. ostrearia-like diatom biodiversity has recently been extended with the discovery of several new species of blue diatoms, the recently described H. karadagensis, H. silbo sp. inedit. and H. provincialis sp. inedit. These blue diatoms produce different marennine-like pigments, which belong to the same chemical family and present similar biological activities. Aside from being a potential source of natural blue pigments, H. ostrearia-like diatoms thus present a commercial potential for aquaculture, cosmetics, food and health industries.

Bacterial adhesion and growth reduction by novel rubber-derived oligomers.

In the medical field, attached bacteria can cause infections associated with catheters, incisions, burns, and medical implants especially in immunocompromised patients. The problem is exacerbated by the fact that attached bacteria are ∼1000 times more resistant to antibiotics than planktonic cells. The rapid spread of antibiotic resistance in these and other organisms has led to a significant need to find new methods for preventing bacterial attachment. The goal of this research was to evaluate the effectiveness of novel polymer coatings to prevent the attachment of three medically relevant bacteria. Tests were conducted with Pseudomonas aeruginosa, Staphylococcus epidermidis, and Staphylococcus aureus for oligomers derived from modifications of natural rubber (cis 1,4-polyisoprene). The different oligomers were: PP04, with no quaternary ammonium (QA); MV067, one QA; PP06, three QA groups. In almost all experiments, cell attachment was inhibited to various extents as long as the oligomers were used. PP06 was the most effective as it decreased the planktonic cell numbers by at least 50% for all bacteria. Differences between species sensitivity were also observed. P. aeruginosa was the most resistant bacteria tested, S. aureus, the most sensitive. Further experiments are required to understand the full extent and mode of the antimicrobial properties of these surfaces.

Development of the Pseudomonas aeruginosa mushroom morphology and cavity formation by iron-starvation: a mathematical modeling study.

We present a mathematical model of mushroom-like architecture and cavity formation in Pseudomonas aeruginosa biofilms. We demonstrate that a proposed disparity in internal friction between the stalk and cap extracellular polymeric substances (EPS) leads to spatial variation in volumetric expansion sufficient to produce the mushroom morphology. The capability of diffusible signals to induce the formation of a fluid-filled cavity within the cap is then investigated. We assume that conversion of bacteria to the planktonic state within the cap occurs in response to the accumulation or depletion of some signal molecule. We (a) show that neither simple nutrient starvation nor signal production by one or more subpopulations of bacteria is sufficient to trigger localized cavity formation. We then (b) demonstrate various hypothetical scenarios that could result in localized cavity formation. Finally, we (c) model iron availability as a detachment signal and show simulation results demonstrating cavity formation by iron starvation. We conclude that iron availability is a plausible mechanism by which fluid-filled cavities form in the cap region of mushroom-like structures.

Mathematical modelling of Pseudomonas aeruginosa biofilm growth and treatment in the cystic fibrosis lung.

Lung failure due to chronic bacterial infection is the leading cause of death for patients with cystic fibrosis (CF). It is thought that the chronic nature of these infections is, in part, due to the increased tolerance and recalcitrant behaviour of bacteria growing as biofilms. Inhalation of silver carbene complex (SCC) antimicrobial, either encased in polymeric biodegradable particles or in aqueous form, has been proposed as a treatment. Through a coordinated experimental and mathematical modelling effort, we examine this proposed treatment of lung biofilms. Pseudomonas aeruginosa biofilms grown in a flow-cell apparatus irrigated with an artificial CF sputum medium are analysed as an in vitro model of CF lung infection. A 2D mathematical model of biofilm growth within the flow-cell is developed. Numerical simulations demonstrate that SCC inactivation by the environment is critical in aqueous SCC, but not SCC-polymer, based treatments. Polymer particle degradation rate is shown to be an important parameter that can be chosen optimally, based on environmental conditions and bacterial susceptibility.