RESUMEN
Image analysis of electron micrographs of thin-sectioned myosin subfragment-1 (S1) crystals has been used to determine the structure of the myosin head at approximately 25-A resolution. Previous work established that the unit cell of type I crystals of myosin S1 contains eight molecules arranged with orthorhombic space group symmetry P212121 and provided preliminary information on the size and shape of the myosin head (Winkelmann, D. A., H. Mekeel, and I. Rayment. 1985. J. Mol. Biol. 181:487-501). We have applied a systematic method of data collection by electron microscopy to reconstruct the three-dimensional (3D) structure of the S1 crystal lattice. Electron micrographs of thin sections were recorded at angles of up to 50 degrees by tilting the sections about the two orthogonal unit cell axes in sections cut perpendicular to the three major crystallographic axes. The data from six separate tilt series were merged to form a complete data set for 3D reconstruction. This approach has yielded an electron density map of the unit cell of the S1 crystals of sufficient detail. to delineate the molecular envelope of the myosin head. Myosin S1 has a tadpole-shaped molecular envelope that is very similar in appearance to the pear-shaped myosin heads observed by electron microscopy of rotary-shadowed and negatively stained myosin. The molecule is divided into essentially three morphological domains: a large domain on one end of the molecule corresponding to approximately 60% of the total molecular volume, a smaller central domain of approximately 30% of the volume that is separated from the larger domain by a cleft on one side of the molecule, and the smallest domain corresponding to a thin tail-like region containing approximately 10% of the volume. This molecular organization supports models of force generation by myosin which invoke conformational mobility at interdomain junctions within the head.
Asunto(s)
Subfragmentos de Miosina/ultraestructura , Actomiosina/ultraestructura , Animales , Pollos , Microscopía Electrónica , Modelos Moleculares , Músculos , Subfragmentos de Miosina/aislamiento & purificación , Miosinas/ultraestructura , Conformación ProteicaRESUMEN
The structure of rhesus rotavirus was examined by cryoelectron microscopy and image analysis. Three-dimensional reconstructions of infectious virions were computed at 26- and 37-A resolution from electron micrographs recorded at two different levels of defocus. The major features revealed by the reconstructions are (a) both outer and inner capsids are constructed with T = 13l icosahedral lattice symmetry; (b) 60 spikelike projections, attributed to VP4, extend at least 100 A from the outer capsid surface; (c) the outer capsid, attributed primarily to VP7, has a smoothly rippled surface at a mean radius of 377 A and is perforated by 132 aqueous holes ranging from 40-65 A in diameter; (d) the inner capsid has a "bristled" outer surface composed of 260 trimeric-shaped columns of density, attributed to VP6, which merge with a smooth, spherical shell of density at a lower, mean radius of 299 A, and which is perforated by holes in register with those in the outer capsid; (e) a "core" region contains a third, nonspherical shell of density at a mean radius of 225 A that encapsidates the double-stranded RNA genome; and (f) the space between the outer and inner capsids forms an open aqueous network that may provide pathways for the diffusion of ions and small regulatory molecules as well as the extrusion of RNA. The assignment of different viral structural proteins to specific features of the reconstruction has been tentatively made on the basis of excluded volume estimates and previous biochemical characterizations of rotavirus.
Asunto(s)
Macaca mulatta/microbiología , Macaca/microbiología , Rotavirus/ultraestructura , Animales , Criopreservación/métodos , Procesamiento de Imagen Asistido por Computador , Microscopía Electrónica/métodosRESUMEN
Micrographs of mouse liver gap junctions, isolated with detergents, and negatively stained with uranyl acetate, have been recorded by low-irradiation methods. Our Fourier-averaged micrographs of the hexagonal junction lattice show skewed, hexameric connexons with less stain at the threefold axis than at the six indentations between the lobes of the connexon image. These substructural features, not clearly observed previously, are acutely sensitive to irradiation. After an electron dose less than that normally used in microscopy, the image is converted to the familiar doughnut shape, with a darkly stained center and a smooth hexagonal outline, oriented with mirror symmetry in the lattice. Differences in appearance among 25 reconstructed images from our low-irradiation micrographs illustrate variation in staining of the connexon channel and the space between connexons. Consistently observed stain concentration at six symmetrically related sites approximately 34 A from the connexon center, 8 degrees to the right or left of the (1, 1) lattice vector may reveal an intrinsic asymmetric feature of the junction structure. The unexpected skewing of the six-lobed connexon image suggests that the pair of hexagonal membrane arrays that form the junction may not be structurally identical. Because the projected image of the connexon pair itself appears mirror symmetric, each pair may consist of two identical connexon hexamers related by local (noncrystallographic) twofold axes in the junctional plane at the middle of the gap. All connexons may be chemically identical, but their packing in the hexagonal arrays on the two sides of the junction appears to be nonequivalent.
Asunto(s)
Uniones Intercelulares/ultraestructura , Compuestos Organometálicos , Animales , Computadores , Electrones , Análisis de Fourier , Uniones Intercelulares/efectos de la radiación , Hígado/ultraestructura , Ratones , Microscopía Electrónica , Coloración y Etiquetado , UranioRESUMEN
Three structural forms of type 1 Lang reovirus (virions, intermediate subviral particles [ISVPs], and cores) have been examined by cryoelectron microscopy (cryoEM) and image reconstruction at 27 to 32-A resolution. Analysis of the three-dimensional maps and known biochemical composition allows determination of capsid protein location, globular shape, stoichiometry, quaternary organization, and interactions with adjacent capsid proteins. Comparisons of the virion, ISVP and core structures and examination of difference maps reveal dramatic changes in supra-molecular structure and protein conformation that are related to the early steps of reovirus infection. The intact virion (approximately 850-A diam) is designed for environmental stability in which the dsRNA genome is protected not only by tight sigma 3-mu 1, lambda 2-sigma 3, and lambda 2-mu 1 interactions in the outer capsid but also by a densely packed core shell formed primarily by lambda 1 and sigma 2. The segmented genome appears to be packed in a liquid crystalline fashion at radii < 240 A. Depending on viral growth conditions, virions undergo cleavage by enteric or endosomal/lysosomal proteases, to generate the activated ISVP (approximately 800-A diam). This transition involves the release of an outer capsid layer spanning radii from 360 to 427 A that is formed by 60 tetrameric and 60 hexameric clusters of ellipsoidal subunits of sigma 3. The vertex-associated cell attachment protein, sigma 1, also undergoes a striking change from a poorly visualized, more compact form, to an extended, flexible fiber. This conformational change may maximize interactions of sigma 1 with cell surface receptors. Transcription of viral mRNAs is mediated by the core particle (approximately 600-A diam), generated from the ISVP after penetration and uncoating. The transition from ISVP to core involves release of the 12 sigma 1 fibers and the remaining outer capsid layer formed by 200 trimers of rod-shaped mu 1 subunits that span radii from 306 to 395 A. In the virion and ISVP, flower-shaped pentamers of the lambda 2 protein are centered at the vertices. In the ISVP-to-core transition, domains of the lambda 2 subunits rotate and swing upward and outward to form a turret-like structure extending from radii 305 to 400 A, with a diameter of 184 A, and a central channel 84 A wide. This novel conformational change allows the potential diffusion of substrates for transcription and exit of newly synthesized mRNA segments.(ABSTRACT TRUNCATED AT 400 WORDS)
Asunto(s)
Cápside/química , Cápside/ultraestructura , Infecciones por Reoviridae/fisiopatología , Reoviridae/ultraestructura , Proteínas del Núcleo Viral/química , Proteínas del Núcleo Viral/ultraestructura , Virión/química , Virión/ultraestructura , Animales , Cápside/genética , Células Cultivadas , Frío , ADN Viral/análisis , ADN Viral/genética , Fibroblastos/citología , Fibroblastos/microbiología , Procesamiento de Imagen Asistido por Computador , Sustancias Macromoleculares , Ratones , Microscopía Electrónica/métodos , Conformación Proteica , ARN Bicatenario/análisis , ARN Bicatenario/genética , ARN Mensajero/análisis , ARN Mensajero/genética , ARN Viral/análisis , ARN Viral/genética , Reoviridae/química , Reoviridae/genética , Infecciones por Reoviridae/metabolismo , Transcripción Genética , Proteínas del Núcleo Viral/genética , Virión/genéticaRESUMEN
Electron micrographs and x-ray diffraction patterns of crystals of ribulose bisphosphate carboxylase, probably the most abundant protein on earth, have provided new details of the arrangement of subunits. The eight large subunits and eight small subunits are clustered in two layers, perpendicular to a fourfold axis of symmetry. Viewed down the fourfold axis, the molecule is square-shaped.
RESUMEN
Viruses are cellular parasites. The linkage between viral and host functions makes the study of a viral life cycle an important key to cellular functions. A deeper understanding of many aspects of viral life cycles has emerged from coordinated molecular and structural studies carried out with a wide range of viral pathogens. Structural studies of viruses by means of cryo-electron microscopy and three-dimensional image reconstruction methods have grown explosively in the last decade. Here we review the use of cryo-electron microscopy for the determination of the structures of a number of icosahedral viruses. These studies span more than 20 virus families. Representative examples illustrate the use of moderate- to low-resolution (7- to 35-A) structural analyses to illuminate functional aspects of viral life cycles including host recognition, viral attachment, entry, genome release, viral transcription, translation, proassembly, maturation, release, and transmission, as well as mechanisms of host defense. The success of cryo-electron microscopy in combination with three-dimensional image reconstruction for icosahedral viruses provides a firm foundation for future explorations of more-complex viral pathogens, including the vast number that are nonspherical or nonsymmetrical.
Asunto(s)
Microscopía por Crioelectrón/métodos , Procesamiento de Imagen Asistido por Computador/métodos , Virus/ultraestructura , Cristalografía por Rayos X , Modelos Moleculares , Modelos Estructurales , Reproducibilidad de los Resultados , Virus/crecimiento & desarrolloRESUMEN
BACKGROUND: Parvoviruses infect vertebrates, insects and crustaceans. Many arthropod parvoviruses (densoviruses) are highly pathogenic and kill approximately 90% of the host larvae within days, making them potentially effective as selective pesticides. Improved understanding of densoviral structure and function is therefore desirable. There are four different initiation sites for translation of the densovirus capsid protein mRNA, giving rise to the viral proteins VP1 to VP4. Sixty copies of the common, C-terminal domain make up the ordered part of the icosahedral capsid. RESULTS: The Galleria mellonella densovirus (GMDNV) capsid protein consists of a core beta-barrel motif, similar to that found in many other viral capsid proteins. The structure most closely resembles that of the vertebrate parvoviruses, but it has diverged beyond recognition in many of the long loop regions that constitute the surface features and intersubunit contacts. The N termini of twofold-related subunits have swapped their positions relative to those of the vertebrate parvoviruses. Unlike in the vertebrate parvoviruses, in GmDNV there is no continuous electron density in the channels running along the fivefold axes of the virus. Electron density corresponding to some of the single-stranded DNA genome is visible in the crystal structure, but it is not as well defined as in the vertebrate parvoviruses. CONCLUSIONS: The sequence of the glycine-rich motif, which occupies each of the channels along the fivefold axes in vertebrate viruses, is conserved between mammalian and insect parvoviruses. This motif may serve to externalize the N-terminal region of the single VP1 subunit per particle. The domain swapping of the N termini between insect and vertebrate parvoviruses may have the effect of increasing capsid stability in GmDNV.
Asunto(s)
Cápside/química , Densovirus/química , Secuencia de Aminoácidos , Animales , Sitios de Unión , Evolución Biológica , Cápside/metabolismo , Cationes Bivalentes , Densovirus/genética , Modelos Moleculares , Datos de Secuencia Molecular , Mariposas Nocturnas/virología , Homología de Secuencia de Aminoácido , Difracción de Rayos XRESUMEN
BACKGROUND: RNA-protein interactions stabilize many viruses and also the nucleoprotein cores of enveloped animal viruses (e.g. retroviruses). The nucleoprotein particles are frequently pleomorphic and generally unstable due to the lack of strong protein-protein interactions in their capsids. Principles governing their structures are unknown because crystals of such nucleoprotein particles that diffract to high resolution have not previously been produced. Cowpea chlorotic mottle virions (CCMV) are typical of particles stabilized by RNA-protein interactions and it has been found that crystals that diffract beyond 4.5 A resolution are difficult to grow. However, we report here the purification of CCMV with an exceptionally mild procedure and the growth of crystals that diffract X-rays to 3.2 A resolution. RESULTS: The 3.2 A X-ray structure of native CCMV, an icosahedral (T = 3) RNA plant virus, shows novel quaternary structure interactions based on interwoven carboxyterminal polypeptides that extend from canonical capsid beta-barrel subunits. Additional particle stability is provided by intercapsomere contacts between metal ion mediated carboxyl cages and by protein interactions with regions of ordered RNA. The structure of a metal-free, swollen form of the virus was determined by cryo-electron microscopy and image reconstruction. Modeling of this structure with the X-ray coordinates of the native subunits shows that the 29 A radial expansion is due to electrostatic repulsion at the carboxyl cages and is stopped short of complete disassembly by preservation of interwoven carboxyl termini and protein-RNA contacts. CONCLUSIONS: The CCMV capsid displays quaternary structural interactions that are unique compared with previously determined RNA virus structures. The loosely coupled hexamer and pentamer morphological units readily explain their versatile reassembly properties and the pH and metal ion dependent polymorphism observed in the virions. Association of capsomeres through inter-penetrating carboxy-terminal portions of the subunit polypeptides has been previously described only for the DNA tumor viruses, SV40 and polyoma.
Asunto(s)
Bromovirus/ultraestructura , Conformación Proteica , Estructura Secundaria de Proteína , Proteínas Virales/química , Secuencia de Aminoácidos , Bromovirus/química , Simulación por Computador , Cristalografía por Rayos X/métodos , Congelación , Microscopía Electrónica/métodos , Modelos Moleculares , Datos de Secuencia Molecular , Unión Proteica , ARN Viral/química , ARN Viral/metabolismo , Homología de Secuencia de Aminoácido , Proteínas Virales/metabolismoRESUMEN
BACKGROUND: Spiroplasma virus, SpV4, is a small, non-enveloped virus that infects the helical mollicute Spiroplasma melliferum. SpV4 exhibits several similarities to the Chlamydia phage, Chp1, and the Coliphages alpha 3, phi K, G4 and phi X174. All of these viruses are members of the Microviridae. These viruses have isometric capsids with T = 1 icosahedral symmetry, cause lytic infections and are the only icosahedral phages that contain single-stranded circular DNA genomes. The aim of this comparative study on these phages was to understand the role of their capsid proteins during host receptor recognition. RESULTS: The three-dimensional structure of SpV4 was determined to 27 A resolution from images of frozen-hydrated particles. Cryo-electron microscopy (cryo-EM) revealed 20, approximately 54 A long, 'mushroom-like' protrusions on the surface of the capsid. Each protrusion comprises a trimeric structure that extends radially along the threefold icosahedral axes of the capsid. A 71 amino acid portion of VP1 (the SpV4 capsid protein) was shown, by structural alignment with the atomic structure of the F capsid protein of phi X174, to represent an insertion sequence between the E and F strands of the eight-stranded antiparallel beta-barrel. Secondary structure prediction of this insertion sequence provided the basis for a probable structural motif, consisting of a six-stranded antiparallel beta sheet connected by small turns. Three such motifs form the rigid stable trimeric structures (mushroom-like protrusions) at the threefold axes, with hydrophobic depressions at their distal surface. CONCLUSIONS: Sequence alignment and structural analysis indicate that distinct genera of the Microviridae might have evolved from a common primordial ancestor, with capsid surface variations, such as the SpV4 protrusions, resulting from gene fusion events that have enabled diverse host ranges. The hydrophobic nature of the cavity at the distal surface of the SpV4 protrusions suggests that this region may function as the receptor-recognition site during host infection.
Asunto(s)
Evolución Biológica , Cápside/química , Microviridae/química , Estructura Secundaria de Proteína , Spiroplasma/virología , Secuencia de Aminoácidos , Cristalografía por Rayos X , Variación Genética , Procesamiento de Imagen Asistido por Computador , Microscopía Electrónica/métodos , Microviridae/ultraestructura , Datos de Secuencia Molecular , Filogenia , Alineación de Secuencia , Virión/ultraestructuraRESUMEN
BACKGROUND: Studies of simple RNA animal viruses show that cell attachment, particle destabilization and cell entry are complex processes requiring a level of capsid sophistication that is difficult to achieve with a shell containing only a single gene product. Nodaviruses [such as Flock House virus (FHV)] are an exception. We have previously determined the structure of FHV at 3 A resolution, and now combine this information with data from cryo-electron microscopy in an attempt to clarify the process by which nodaviruses infect animal cells. RESULTS: A difference map was computed in which electron density at 22 A resolution, derived from the 3.0 A resolution X-ray model of the FHV capsid protein, was subtracted from the electron density derived from the cryo-electron microscopy reconstruction of FHV at 22 A resolution. Comparisons of this density with the X-ray model showed that quasi-equivalent regions of identical polypeptide sequences have markedly different interactions with the bulk RNA density. Previously reported biphasic kinetics of particle maturation and the requirement of subunit cleavage for particle infectivity are consistent with these results. CONCLUSIONS: On the basis of this study we propose a model for nodavirus infection that is conceptually similar to that proposed for poliovirus but differs from it in detail. The constraints of a single protein type in the capsid lead to a noteworthy use of quasi-symmetry not only to control the binding of a 'pocket factor' but also to modulate maturation cleavage and to release a pentameric helical bundle (with genomic RNA attached) that may further interact with the cell membrane.
Asunto(s)
Cápside/química , Cristalografía por Rayos X , Microscopía Electrónica/métodos , Picornaviridae/ultraestructura , Conformación Proteica , Cápside/ultraestructura , Congelación , Virus de Insectos/fisiología , Virus de Insectos/ultraestructura , Modelos Moleculares , Conformación de Ácido Nucleico , Picornaviridae/fisiología , ARN Viral/química , ARN Viral/ultraestructura , Receptores Virales/metabolismoRESUMEN
BACKGROUND: Members of the Parvovirus genus cause a variety of diseases in mammals, including humans. One of the major defences against viral infection is the presence of neutralizing antibodies that prevent virus particles from infecting target cells. The mechanism of neutralization is not well understood. We therefore studied the structure of canine parvovirus (CPV) complexed with the Fab fragment of a neutralizing antibody, A3B10, using image reconstruction of electron micrographs of vitrified samples, together with the already known structure of CPV from X-ray crystallographic data. RESULTS: The structure of the complex of CPV with Fab A3B10 has been determined to 23 A resolution. The known CPV atomic structure was subtracted from the electron density of the complex, and the difference map was used to fit the atomic coordinates of a known Fab fragment, HyHEL-5. The long axis of each Fab molecule is oriented in a near radial direction, inclined away from the two-fold axes. The viral epitope consists of 14 amino acid residues found in loops 1, 2 and 3 on the capsid surface, which include previously identified escape mutations. CONCLUSIONS: The mode of Fab binding suggests that the A3B10 neutralizing antibody cannot bind bivalently to the capsid across the two-fold axes, consistent with the observation that whole A3B10 antibody readily precipitates CPV. Since Fab A3B10 can also neutralize the virus, mechanisms of neutralization such as interference with cell attachment, cell entry, or uncoating, must be operative.
Asunto(s)
Anticuerpos Antivirales/ultraestructura , Epítopos/ultraestructura , Fragmentos Fab de Inmunoglobulinas/ultraestructura , Parvovirus Canino/ultraestructura , Secuencia de Aminoácidos , Anticuerpos Monoclonales/genética , Anticuerpos Monoclonales/metabolismo , Anticuerpos Monoclonales/ultraestructura , Anticuerpos Antivirales/genética , Anticuerpos Antivirales/metabolismo , Epítopos/metabolismo , Congelación , Procesamiento de Imagen Asistido por Computador , Fragmentos Fab de Inmunoglobulinas/genética , Fragmentos Fab de Inmunoglobulinas/metabolismo , Microscopía Electrónica/métodos , Modelos Moleculares , Datos de Secuencia Molecular , Pruebas de Neutralización , Parvovirus Canino/metabolismo , Unión Proteica , Proteínas Recombinantes/metabolismo , Proteínas Recombinantes/ultraestructuraRESUMEN
Chimeric B72.3, composed of the V-regions of murine B72.3 and the constant regions of human immunoglobulin G4 heavy and kappa light chain, was administered as a 131I-labeled conjugate to 12 patients with metastatic colon cancer. Seven of these patients had an antibody response after initial infusion, and the immune response was primarily directed to the murine V-region, although a small proportion of the antibody response was directed to topographical epitopes requiring the presence of both murine V-region and human CH-1 and kappa constant regions (neo-epitopes). The pharmacokinetics included a plasma disappearance curve best fit by a two-compartmental model with an alpha t 1/2 of 18 +/- 7 h and a beta t 1/2 of 224 +/- 66 h. A second infusion of the same dose of 131I-chimeric B72.3 was administered to four of these patients 8 wk after the first infusion. Two patients who had a high antibody response to initial infusion had an anamnestic antibody response, and the infused ch-B72.3 rapidly disappeared from the circulation with associated immune complexes and free 131I in the plasma. One patient with no initial antibody response had no antibody response and identical pharmacokinetics on second infusion. One patient with a modest transient antibody response to initial infusion had no antibody response on second infusion and a modest shortening of plasma circulation. Thus, the human immunoglobulin G4 isotype chimeric B72.3 monoclonal antibody has a plasma half-life 6 to 8 times as long as murine B72.3 and retains considerable immunogenicity in some patients which can adversely affect repetitive infusions.
Asunto(s)
Anticuerpos Monoclonales/uso terapéutico , Neoplasias Colorrectales/tratamiento farmacológico , Animales , Anticuerpos Monoclonales/inmunología , Anticuerpos Monoclonales/metabolismo , Especificidad de Anticuerpos/inmunología , Antígenos de Neoplasias/sangre , Neoplasias Colorrectales/metabolismo , Evaluación de Medicamentos , Glicoproteínas/sangre , Humanos , RatonesRESUMEN
Thirty-one patients suspected of having ovarian cancer received a single i.v. injection of radiolabeled (100 MBq (111)In) engineered human CTMO1 (hCTMO1) to investigate its potential as an internalizing drug carrier. hCTMO1 is a complementary-determining region-grafted human IgG4 monoclonal antibody recognizing an ovarian carcinoma-associated antigen, the MUC-1-gene product. The amount of radioactivity was determined in tumor tissue, various normal tissues, including liver biopsies, and blood samples obtained at laparotomy, 6 days after injection of either 0.1 or 1.0 mg hCTMO1/kg of body weight. Circulating antigen-15-3 was measurable in all patients before injection, and immune complex formation was already present at the end of infusion. In the 0.1 mg/kg group, most of the radioactivity was bound to immune complexes, whereas in the 1.0 mg/kg group, most was bound to IgG monomers. Increasing the hCTMO1 dose 10-fold did not influence the overall disappearance of (111)In from the blood, but the elimination half-life of (111)indium bound to immune complexes was increased 2-fold. Uptake in tumor tissue 6 days postinjection at the 0.1 mg/kg dose was 7.6 times higher (P = 0.0009) than in normal tissue and 2.5 times higher (P = 0.03) than in blood. At the 1.0 mg/kg dose, the uptake in tumor tissue was 14.0 times higher (P = 0.0003) than in normal tissue and 8.1 times higher (P = 0.0007) than in blood. Liver activity was substantial (23.7 +/- 10.5 and 18.3 +/- 6.7% of the injected dose/kg for the 0.1 and 1.0 mg/kg dose group, respectively). These results are superior to those found with other clinically tested anti-MUC-1 gene product antibodies. hCTMO1 seems to be a suitable carrier for cytotoxic agents in ovarian carcinoma patients; the better uptake results and tumor-to-blood ratios are obtained at the higher dose of 1.0 mg hCTMO1/kg body weight.
Asunto(s)
Anticuerpos Monoclonales/farmacocinética , Mucina-1/inmunología , Neoplasias Ováricas/metabolismo , Adulto , Anciano , Anciano de 80 o más Años , Femenino , Semivida , Humanos , Radioisótopos de Indio/farmacocinética , Persona de Mediana Edad , Neoplasias Ováricas/diagnóstico por imagen , Neoplasias Ováricas/inmunología , Cintigrafía , Distribución TisularRESUMEN
Micrographs of isolated gap junction specimens, negatively stained with one molybdate, three tungstate and three uranyl stains, were recorded at low and high irradiation. Fourier-averaged images of the negatively stained gap junctions have been self-consistently scaled to identify conserved and variable features. Intrinsic features in the hexagonally averaged images have been distinguished from residual noise by statistical comparisons among similarly prepared specimens. The cationic uranyl stains can penetrate the axial connexon channel, whereas the anionic stains are largely excluded; these observations indicate that the channel is negatively charged. Variability in the extent of the axial stain penetration, and enhancement of this staining by radiation damage and heating may be accounted for by a leaky, labile channel gate. The peripheral stain concentrations marking the perimeter of the skewed, six-lobed connexon image and the stain-excluding region at the 3-fold axis of the lattice, which are seen only under conditions of low irradiation with both anionic and cationic stains, are identified as intrinsic features of the isolated gap junction structure. The stain concentrations located approximately 30 A from the connexon center appear to be symmetrically related on opposite sides of the junction by non-crystallographic 2-fold axes oriented approximately 8 degrees to the lattice axes at the plane of the gap. The radiation-sensitive hexagonal features seen in the negatively stained images may correspond to substructure on the cytoplasmic surfaces of the paired gap junction membranes.
Asunto(s)
Uniones Intercelulares/ultraestructura , Animales , Aniones , Cationes , Comunicación Celular , Hígado/ultraestructura , Ratones , Microscopía Electrónica/métodos , Modelos Biológicos , Coloración y EtiquetadoRESUMEN
The crystal structure of Fab17-IA, an antigen-binding fragment from a murine immunoglobulin that neutralizes human rhinovirus 14 (HRV14), has been solved to 2.7 A resolution. Fab17-IA crystallized into three different space groups depending upon the method used to purify the intact antibody. The structure was determined by use of molecular and isomorphous replacement methods. The current model has a crystallographic R-factor of approximately 19% for 10,192 independent reflections between 8 and 2.7 A. Correlation coefficient calculations showed that the Fab17-IA structure can be fit into the Fab17-IA/HRV14 image reconstruction density to within 5 A positional accuracy and to within a few degrees of rotation. The resulting interface of the docked antibody was examined and showed extensive charge and shape complementarity with the virus surface that was supported by site-directed mutagenesis experiments. The success of this approach validates the utility of combining X-ray crystallography with cryo-electron microscopy of complex macromolecular assemblies.
Asunto(s)
Anticuerpos Antivirales/química , Complejo Antígeno-Anticuerpo/química , Fragmentos Fab de Inmunoglobulinas/química , Rhinovirus/química , Secuencia de Aminoácidos , Anticuerpos Monoclonales/química , Anticuerpos Monoclonales/inmunología , Anticuerpos Antivirales/inmunología , Complejo Antígeno-Anticuerpo/inmunología , Complejo Antígeno-Anticuerpo/ultraestructura , Secuencia de Bases , Criopreservación , Cristalografía por Rayos X , Humanos , Fragmentos Fab de Inmunoglobulinas/inmunología , Fragmentos Fab de Inmunoglobulinas/ultraestructura , Microscopía Electrónica , Modelos Moleculares , Datos de Secuencia Molecular , Pruebas de Neutralización , Conformación Proteica , Rhinovirus/inmunología , Rhinovirus/ultraestructura , Homología de Secuencia de Aminoácido , Relación Estructura-ActividadRESUMEN
Capsids of papilloma and polyoma viruses (papovavirus family) are composed of 72 pentameric capsomeres arranged on a skewed icosahedral lattice (triangulation number of seven, T = 7). Cottontail rabbit papillomavirus (CRPV) was reported previously to be a T = 7laevo (left-handed) structure, whereas human wart virus, simian virus 40, and murine polyomavirus were shown to be T = 7dextro (right-handed). The CRPV structure determined by cryoelectron microscopy and image reconstruction was similar to previously determined structures of bovine papillomavirus type 1 (BPV-1) and human papillomavirus type 1 (HPV-1). CRPV capsids were observed in closed (compact) and open (swollen) forms. Both forms have star-shaped capsomeres, as do BPV-1 and HPV-1, but the open CRPV capsids are approximately 2 nm larger in radius. The lattice hands of all papillomaviruses examined in this study were found to be T = 7dextro. In the region of maximum contact, papillomavirus capsomeres interact in a manner similar to that found in polyomaviruses. Although papilloma and polyoma viruses have differences in capsid size (approximately 60 versus approximately 50 nm), capsomere morphology (11 to 12 nm star-shaped versus 8 nm barrel-shaped), and intercapsomere interactions (slightly different contacts between capsomeres), papovavirus capsids have a conserved, 72-pentamer, T = 7dextro structure. These features are conserved despite significant differences in amino acid sequences of the major capsid proteins. The conserved features may be a consequence of stable contacts that occur within capsomeres and flexible links that form among capsomeres.
Asunto(s)
Proteínas de la Cápside , Cápside/ultraestructura , Papillomaviridae/ultraestructura , Poliomavirus/ultraestructura , Animales , Antígenos Virales/química , Papillomavirus Bovino 1/química , Papillomavirus Bovino 1/ultraestructura , Cápside/química , Papillomavirus del Conejo de Rabo Blanco/química , Papillomavirus del Conejo de Rabo Blanco/ultraestructura , Humanos , Papillomaviridae/química , Poliomavirus/química , Conejos , Alineación de Secuencia , Virus 40 de los Simios/química , Virus 40 de los Simios/ultraestructura , Proteínas Estructurales Virales/químicaRESUMEN
The primary functions of most virus capsids are to protect the viral genome in the extra-cellular milieu and deliver it to the host. In contrast, the capsids of fungal viruses, like the cores of all other known double stranded RNA viruses, are not involved in host recognition but do shield their genomes, and they also carry out transcription and replication. Nascent (+) strands are extruded from transcribing virions. The capsids of the yeast virus L-A are composed of Gag (capsid protein; 76 kDa), with a few molecules of Gag-Pol (170 kDa). Analysis of these 420 A diameter shells and those of the fungal P4 virus by cryo-electron microscopy and image reconstruction shows that they share the same novel icosahedral structure. Both capsids consist of 60 equivalent Gag dimers, whose two subunits occupy non-equivalent bonding environments. Stoichiometry data on other double-stranded RNA viruses indicate that the 120-subunit structure is widespread, implying that this molecular architecture has features that are particularly favorable to the design of a capsid that is also a biosynthetic compartment.
Asunto(s)
Cápside/ultraestructura , Productos del Gen gag/ultraestructura , Virus ARN/ultraestructura , ARN Bicatenario/biosíntesis , ARN Viral/biosíntesis , Compartimento Celular , Citoplasma/virología , Virus ARN/genética , Saccharomyces cerevisiae/virología , Ustilago/virologíaRESUMEN
A correlation of myelotoxic effect with concentration or a foreign compound of its metabolite at the site of action may provide useful insights into the mechanism of toxic action and/or its amelioration. This correlation requires sensitive and specific assay methods. This communication describes useful methods for the study of benzene disposition in rodents. The assays are sensitive, specific, and rapid. They rely on gas chromatography-mass spectrometry and on high performance liquid chromatography. These methods have allowed measurement of catechol, phenol, and hydroquinone in samples of rodent bone marrow following inhalation exposure to benzene. Their application to the study of benzene metabolism in rat bone marrow in situ is also described.
Asunto(s)
Benceno/metabolismo , Enfermedades de la Médula Ósea/inducido químicamente , Tejido Adiposo/metabolismo , Animales , Benceno/toxicidad , Biotransformación , Médula Ósea/metabolismo , Cinética , Masculino , Ratas , Ratas Endogámicas F344RESUMEN
Crystallographic and molecular biological studies of T = 3 nodaviruses (180 identical subunits in the particle) and T = 4 tetraviruses (240 identical subunits in the particle) have revealed similarity in both the architecture of the particles and the strategy for maturation. The comparative studies provide a novel opportunity to examine an apparent evolution of particle size, from smaller (T = 3) to larger (T = 4), with both particles based on similar subunits. The BBV and FHV nodavirus structures are refined at 2.8 A and 3 A respectively, while the N omega V structure is at 6 A resolution. Nevertheless, the detailed comparisons of the noda and tetravirus X-ray electron density maps show that the same type of switching in subunit twofold contacts is used in the T = 3 and T = 4 capsids, although differences must exist between quasi and icosahedral threefold contacts in the T = 4 particle that have not yet been detected. The analyses of primary and tertiary structures of noda and tetraviruses show that N omega V subunits undergo a post assembly cleavage like that observed in nodaviruses and that the cleaved 76 C-terminal residues remain associated with the particle.
Asunto(s)
Virus de Insectos/ultraestructura , Virus ARN/ultraestructura , Cristalografía por Rayos X , Virus de Insectos/clasificación , Microscopía Electrónica , Modelos Moleculares , Modelos Estructurales , Conformación Molecular , Virus ARN/clasificaciónRESUMEN
Cryoelectron microscopy has been used to determine the first structure of a virus when complexed with its glycoprotein cellular receptor. Human rhinovirus 16 (HRV16) complexed with the two amino-terminal, immunoglobulin-like domains of the intercellular adhesion molecule-1 (ICAM-1) shows that ICAM-1 binds into the 12 A deep "canyon" on the surface of the virus. This is consistent with the prediction that the viral receptor attachment site lies in a cavity inaccessible to the host's antibodies. The atomic structures of HRV14 and CD4, homologous to HRV16 and ICAM-1, showed excellent correspondence with observed density, thus establishing the virus-receptor interactions.