Two Solutions of Soil Moisture Sensing with RFID for Landslide Monitoring.

Two solutions for UHF RFID tags for soil moisture sensing were designed and are described in this paper. In the first, two conventional tags (standard transponders) are employed: one, placed close to the soil surface, is the sensor tag, while the other, separated from the soil, is the reference for system calibration. By transmission power ramps, the tag's turn-on power levels are measured and correlated with soil condition (dry or wet). In the second solution, the SL900A chip, which supports up to two external sensors and an internal temperature sensor, is used. An interdigital capacitive sensor was connected to the transponder chip and used for soil moisture measurement. In a novel design for an UHF RFID tag the sensor is placed below the soil surface, while the transponder and antenna are above the soil to improve communication. Both solutions are evaluated practically and results show the presence of water in soil can be remotely detected allowing for their application in landslide monitoring.

An Exploration of Behind-the-Ear ECG Signals From a Single Ear Using Inkjet Printed Conformal Tattoo Electrodes.

Wearable sensors placed behind-the-ear are emerging as being very promising for unobtrusive long term monitoring. Factors such as gait, electroencephalography (EEG), and ballistocardiography (BCG) can all be measured from behind-the-ear in a socially acceptable hearing aid based form factor. Previous works have investigated the recording of electrocardiography (ECG) from the ear, but generally with one electrode placed some distance away from the ear itself. This paper uses recently introduced tattoo electrodes to investigate whether ECG components can indeed be measured from behind a single ear. Compared to a reference photophelsmography (PPG) device we show that the fundamental heart beat frequency is present in behind-the-ear ECG only in half of the cases considered. In contrast the second harmonic is present in all records and could allow the extraction of heart rate to within a few beats-per-minute accuracy. Further signal processing work is required to allow the automated extraction of this, particularly when working with short time windows of data, but our results characterize the signal and demonstrate the principle of behind-the-ear ECG collected from a single ear.

Effect of skin dielectric properties on the read range of epidermal ultra-high frequency radio-frequency identification tags.

This Letter presents an investigation of the effect of human tissue conductivity and permittivity on the performance of epidermal transfer tattoo ultra-high frequency radio-frequency identification (RFID) tags. The measurements were carried out on 20 individuals and the variations in the measured dielectric properties correlate well with variations in the measured tag read range on the individuals and to a lesser extent with their body mass index values. Simulation results also showed the effects of permittivity and conductivity on the designed resonance frequency of the RFID tag.

Conformal electronics for longitudinal bio-sensing in at-home assistive and rehabilitative devices.

Wearable electronics are revolutionizing personalized and preventative healthcare by allowing the easy, unobtrusive, and long term monitoring of a range of body parameters. Conformal electronics which attach directly to the skin in a very robust and long term manner are envisioned as the next generation of highly portable miniaturized computing devices, beyond wearables. In this paper we overview the state-of-the-art in conformal electronics created using silver nanoparticle inkjet printed techniques for home assistive and rehabilitative devices. The barriers to wider adaption, particularly the challenges of high performance antenna design when placed close to the body, are discussed in detail.

Passive wireless tags for tongue controlled assistive technology interfaces.

Tongue control with low profile, passive mouth tags is demonstrated as a human-device interface by communicating values of tongue-tag separation over a wireless link. Confusion matrices are provided to demonstrate user accuracy in targeting by tongue position. Accuracy is found to increase dramatically after short training sequences with errors falling close to 1% in magnitude with zero missed targets. The rate at which users are able to learn accurate targeting with high accuracy indicates that this is an intuitive device to operate. The significance of the work is that innovative very unobtrusive, wireless tags can be used to provide intuitive human-computer interfaces based on low cost and disposable mouth mounted technology. With the development of an appropriate reading system, control of assistive devices such as computer mice or wheelchairs could be possible for tetraplegics and others who retain fine motor control capability of their tongues. The tags contain no battery and are intended to fit directly on the hard palate, detecting tongue position in the mouth with no need for tongue piercings.

Inkjet printed ECG electrodes for long term biosignal monitoring in personalized and ubiquitous healthcare.

This paper investigates the performance of inkjet printed electrodes for electrocardiogram (ECG) monitoring in personalized and ubiquitous healthcare. As a rapid prototyping, additive manufacturing approach, inkjet printing can allow personalization of electrode sizes and shapes and can be used with a range of substrates to achieve good long term connections to the skin. We compare the performance of two types of inkjet electrodes printed using different substrates. Results demonstrate that both new electrodes can record ECG information, with comparable signal-to-noise ratios to conventional Ag/AgCl electrodes. The time-frequency decomposition of the collected signals is also explored.

Smart radio-frequency identification tag for diaper moisture detection.

A passive smart tag is described that responds to dampness in diapers once a pre-defined threshold value is reached. A high-frequency (HF) system at 13.56 MHz is used as this allows operation through water or human tissues with less absorption that would occur for an ultra-HF signal. A circular spiral coil and swelling substrate facilitate a reaction to dampness that can be detected without contact to the diaper wearer. A prototype design is simulated and measured results are provided together with a demonstration of a tag integrated into a worn diaper.