Mass Spectrometric Imaging Using Laser Ablation and Solvent Capture by Aspiration (LASCA).

A novel interface for ambient, laser ablation-based mass spectrometric imaging (MSI) referred to as laser ablation and solvent capture by aspiration (LASCA) is presented and its performance demonstrated using selected, unaltered biological materials. LASCA employs a pulsed 2.94 µm laser beam for specimen ablation. Ablated materials in the laser plumes are collected on a hanging solvent droplet with electric field-enhanced trapping, followed by aspiration of droplets and remaining plume material in the form of a coarse aerosol into a collection capillary. The gas and liquid phases are subsequently separated in a 10 µL-volume separatory funnel, and the solution is analyzed with electrospray ionization in a high mass resolution Q-ToF mass spectrometer. The LASCA system separates the sampling and ionization steps in MSI and combines high efficiencies of laser plume sampling and of electrospray ionization (ESI) with high mass resolution MS. Up to 2000 different compounds are detected from a single ablation spot (pixel). Using the LASCA platform, rapid (6 s per pixel), high sensitivity, high mass-resolution ambient imaging of "as-received" biological material is achieved routinely and reproducibly.

Mass spectrometric metabolomic imaging of biofilms on corroding steel surfaces using laser ablation and solvent capture by aspiration.

Ambient laser ablation and solvent capture by aspiration (LASCA) mass spectrometric imaging was combined with metabolomics high-performance liquid chromatography (HPLC) mass spectrometry analysis and light profilometry to investigate the correlation between chemical composition of marine bacterial biofilms on surfaces of 1018 carbon steel and corrosion damage of steel underneath the biofilms. Pure cultures of Marinobacter sp. or a wild population of bacteria present in coastal seawater served as sources of biofilms. Profilometry data of biofilm-free surfaces demonstrated heterogeneous distributions of corrosion damage. LASCA data were correlated with areas on the coupons varying in the level of corrosion attack, to reveal differences in chemical composition within biofilm regions associated with corroding and corrosion-free zones. Putative identification of selected compounds was carried out based on HPLC results and subsequent database searches. This is the first report of successful ambient chemical and metabolomic imaging of marine biofilms on corroding metallic materials. The metabolic analysis of such biofilms is challenging due to the presence in the biofilm of large amounts of corrosion products. However, by using the LASCA imaging interface, images of more than 1000 ions (potential metabolites) are generated, revealing striking heterogeneities within the biofilm. In the two model systems studied here, it is found that some of the patterns observed in selected ion images closely correlate with the occurrence and extent of corrosion in the carbon steel substrate as revealed by profilometry, while others do not. This approach toward the study of microbially influenced corrosion (MIC) holds great promise for approaching a fundamental understanding of the mechanisms involved in MIC.

Metabolomic and high-throughput sequencing analysis-modern approach for the assessment of biodeterioration of materials from historic buildings.

Preservation of cultural heritage is of paramount importance worldwide. Microbial colonization of construction materials, such as wood, brick, mortar, and stone in historic buildings can lead to severe deterioration. The aim of the present study was to give modern insight into the phylogenetic diversity and activated metabolic pathways of microbial communities colonized historic objects located in the former Auschwitz II-Birkenau concentration and extermination camp in Oswiecim, Poland. For this purpose we combined molecular, microscopic and chemical methods. Selected specimens were examined using Field Emission Scanning Electron Microscopy (FESEM), metabolomic analysis and high-throughput Illumina sequencing. FESEM imaging revealed the presence of complex microbial communities comprising diatoms, fungi and bacteria, mainly cyanobacteria and actinobacteria, on sample surfaces. Microbial diversity of brick specimens appeared higher than that of the wood and was dominated by algae and cyanobacteria, while wood was mainly colonized by fungi. DNA sequences documented the presence of 15 bacterial phyla representing 99 genera including Halomonas, Halorhodospira, Salinisphaera, Salinibacterium, Rubrobacter, Streptomyces, Arthrobacter and nine fungal classes represented by 113 genera including Cladosporium, Acremonium, Alternaria, Engyodontium, Penicillium, Rhizopus, and Aureobasidium. Most of the identified sequences were characteristic of organisms implicated in deterioration of wood and brick. Metabolomic data indicated the activation of numerous metabolic pathways, including those regulating the production of primary and secondary metabolites, for example, metabolites associated with the production of antibiotics, organic acids and deterioration of organic compounds. The study demonstrated that a combination of electron microscopy imaging with metabolomic and genomic techniques allows to link the phylogenetic information and metabolic profiles of microbial communities and to shed new light on biodeterioration processes.

Important role of surface fluoride in nitrogen-doped TiO2 nanoparticles with visible light photocatalytic activity.

Nitrogen-doped TiO2 nanoparticles have been synthesized using sol-gel methods and subsequently fluorinated at room temperature by aging in acidic solutions of NaF. The nanoparticles were characterized by X-ray photoelectron spectroscopy, X-ray diffraction, UV-vis, and IR diffuse reflectance spectroscopy. After aging at room temperature in NaF solutions, the Ti-OH groups on the surface of the TiO2 nanoparticles were replaced by Ti-F bonds, which resulted in a decrease of the point of zero charge from pH 5.4 to 2.8. Most importantly, the nitrogen dopants were retained after the fluorination process, and the amorphous nanoparticles were partially converted into the anatase phase. Annealing the photocatalysts resulted in a decrease of both the nitrogen and fluoride atomic concentration. Diffuse reflectance spectra show an increase in absorbance above 400 nm after annealing the F,N-doped TiO2, which suggests the formation of color centers. The photoactivity of the F,N-doped and N-doped TiO2 catalysts were evaluated by monitoring by the decolorization of methylene blue with visible light. Mass spectrometric analysis revealed that methylene blue undergoes successive demethylation, and more importantly, the rate of decolorization depends on the fluoride concentration. These results show the importance of a two-step synthesis method to independently control the nitrogen and fluoride concentration.