RESUMEN
An increased demand for natural products nowadays most specifically probiotics (PROs) is evident since it comes in conjunction with beneficial health effects for consumers. In this regard, it is well known that encapsulation could positively affect the PROs' viability throughout food manufacturing and long-term storage. This paper aims to analyze and review various double/multilayer strategies for encapsulation of PROs. Double-layer encapsulation of PROs by electrohydrodynamic atomization or electrospraying technology has been reported along with layer-by-layer assembly and water-in-oil-in-water (W1/O/W2) double emulsions to produce multilayer PROs-loaded carriers. Finally, their applications in food products are presented. The resistance and viability of loaded PROs to mechanical damage, during gastrointestinal transit and shelf life of these trapping systems, are also described. The PROs encapsulation in double- and multiple-layer coatings combined with other technologies can be examined to increase the opportunities for new functional products with amended functionalities opening a novel horizon in food technology.
Asunto(s)
Probióticos , Probióticos/química , Emulsiones , Humanos , Portadores de Fármacos/química , Composición de Medicamentos/métodos , Tecnología de Alimentos/métodosRESUMEN
There is an urgent need for the development of sustainable and eco-friendly pesticide formulations since common synthetic pesticides result in many adverse effects on human health and the environment. Essential oils (EOs) are a mixture of volatile oils produced as a secondary metabolite in medicinal plants, and show activities against pests, insects, and pathogenic fungi. Their chemical composition is affected by several factors such as plant species or cultivar, geographical origin, environmental conditions, agricultural practices, and extraction method. The growing number of studies related to the herbicidal, insecticidal, acaricidal, nematicidal, and antimicrobial effects of EOs demonstrate their effectiveness and suitability as sustainable and environment-friendly biopesticides. EOs can biodegrade into nontoxic compounds; at the same time, their harmful and detrimental effects on non-target organisms are low. However, few biopesticide formulations based on EOs have been turned into commercial practice upto day. Several challenges including the reduced stability and efficiency of EOs under environmental conditions need to be addressed before EOs are widely applied as commercial biopesticides. This work is an overview of the current research on the application of EOs as biopesticides. Findings of recent studies focusing on the challenges related to the use of EOs as biopesticides are also discussed.
RESUMEN
Food factories seek the application of natural products, green feedstock and eco-friendly processes, which minimally affect the properties of the food item and products. Today, water and conventional polar solvents are used in many areas of food science and technology. As modern chemistry evolves, new green items for building eco-friendly processes are being developed. This is the case of deep eutectic solvents (DESs), named the next generation of green solvents, which can be involved in many food industries. In this review, we timely analyzed the progress on applying DES toward the development of formulations, extraction of target biomolecules, food processing, extraction of undesired molecules, analysis and determination of specific analytes in food samples (heavy metals, pesticides), food microbiology, and synthesis of new packaging materials, among many other applications. For this, the latest developments (over the last 2-3 years) have been discussed emphasizing innovative ideas and outcomes. Relevantly, we discuss the hypothesis and the key features of using DES in the mentioned applications. To some extent, the advantages and limitations of implementing DES in the food industry are also elucidated. Finally, based on the findings of this review, the perspectives, research gaps and potentialities of DESs are stated.
RESUMEN
The permeation of amino acids and di-peptides with different hydrophobicities across the oil phase in W/O/W double emulsions was investigated at different concentrations, considering the pH of the aqueous phase. Moreover, the particle size, yield of entrapped water and release kinetics of the double emulsions was evaluated as a function of time. Regarding the release of the entrapped amino acids and di-peptides, their hydrophobicity and the pH had a significant effect, whereas the concentration of the dissolved compound did not lead to different release kinetics. The release of the amino acids and di-peptides was faster at neutral pH as compared to acidic pH values due to the increased solute solubility in the oil phase for more hydrophobic molecules at neutral pH. Regarding the effect of the type of oil, much faster amino acid transport was observed through MCT oil as compared to LCT oil, which might be due to its higher solubility and/or higher diffusivity. As di-peptides released faster than amino acids, it follows that the increased solubility overruled the effect from the decreased diffusion coefficient of the dissolved compound in the oil phase.
Asunto(s)
AminoácidosRESUMEN
Natural products interest is gradually increasing worldwide. Plant-food-derived bioactives have a long history of use as a good source of ingredients for valuable medical usages. Plant-based foods consist of micro and macronutrients, and bioactive components, with health-promoting benefits. The handling of complex mixtures of plants has been methodically switched by therapies using a single isolated substance. The delivery of bioactive molecules in nanosystems is enhancing their bioavailability, it is much safer and cost-effective. However, there are many challenges in combining bioactive substances in nanocarrier materials. A discussion related with nanocarriers will be done in this review.
Asunto(s)
Productos Biológicos/farmacología , Alimentos , Nanopartículas/química , Plantas/química , Animales , Disponibilidad Biológica , Humanos , Fitoquímicos/farmacologíaRESUMEN
BACKGROUND: Sour cherries are rich in phenolic compounds possessing several health-promoting effects. Processing of sour cherry juice into powder form offers additional advantages such as increased utilization, reduced volume, easier handling and transportation. However, spray drying of fruit juices is difficult owing to their low glass transition temperatures (Tg). The aim of this study was to investigate the effects of inlet temperature (130-150 °C), feed flow rate in terms of pump setting (30-50%), sour cherry content (25-50% of total dry matter) and carrier type (maltodextrin DE6, maltodextrin DE12, gum arabic) on yield, Tg and total phenolic content (TPC) of spray-dried sour cherry powder. RESULTS: Feed flow rate, sour cherry content and carrier type significantly affected yield and Tg, whereas TPC was affected by sour cherry content and carrier type. The effect of sour cherry content on yield depended on the carrier type. Although gum arabic provided better protection of phenolic content than maltodextrins, it resulted in lower average yield. CONCLUSION: Spray-dried sour cherry powder with high yield (>85%) and high Tg (60 °C) was obtained using the following conditions: 150 °C inlet temperature, 30% pump setting, 25% sour cherry content and maltodextrin DE12 as carrier.
Asunto(s)
Manipulación de Alimentos/métodos , Jugos de Frutas y Vegetales/análisis , Prunus avium/química , Temperatura , AguaRESUMEN
Due to its numerous biological activities, such as antioxidant, anti-inflammatory, antitumor, anti-atherosclerosis, anti-aging, anti-osteoporosis, anti-obesity, estrogenic, neuroprotective and cardioprotective effects, resveratrol has attracted a lot of attention in the food and pharmaceutical industries as a promising bioactive. However, low solubility in aqueous media, limited bioavailability, and low stability of resveratrol in hostile environments limit its applications. The necessity for a summary of recent developments is highlighted by the growing body of research on resveratrol encapsulation as a means of overcoming the mentioned application constraints. This review highlights the present developments in resveratrol delivery techniques, including spray drying, liposomes, emulsions, and nanoencapsulation. Bioaccessibility, bioavailability, stability, and release of resveratrol from encapsulating matrices are discussed. Future research should focus on encapsulation approaches with high loading capacity, targeted delivery, and controlled release. In light of the growing interest in resveratrol and the increasing complexity of resveratrol-based formulations, review of current encapsulation methods is crucial to address existing limitations and pave the way for the development of next-generation delivery systems. This review discusses how the delivery systems with different structures and release mechanisms can unlock the full potential and benefits of resveratrol by enhancing its bioavailability and stability.
RESUMEN
The scourge of obesity arising from obesogens and poor dieting still ravages our planet as half of the global population may be overweight and obese by 2035. This metabolic disorder is intertwined with type 2 diabetes (T2D), both of which warrant alternative therapeutic options other than clinically approved drugs like orlistat with their tendency of abuse and side effects. In this review, we comprehensively describe the global obesity problem and its connection to T2D. Obesity, overconsumption of fats, the mechanism of fat digestion, obesogenic gut microbiota, inhibition of fat digestion, and natural anti-obesity compounds are discussed. Similar discussions are made for diabetes with regard to glucose regulation, the diabetic gut microbiota, and insulinotropic compounds. The sources and production of anti-obesity bioactive peptides (AOBPs) and anti-diabetic bioactive peptides (ADBPs) are also described while explaining their structure-function relationships, gastrointestinal behaviors, and action mechanisms. Finally, the techno-functional applications of AOBPs and ADBPs are highlighted.
Asunto(s)
Fármacos Antiobesidad , Diabetes Mellitus Tipo 2 , Microbioma Gastrointestinal , Hipoglucemiantes , Obesidad , Péptidos , Humanos , Obesidad/tratamiento farmacológico , Péptidos/farmacología , Péptidos/uso terapéutico , Fármacos Antiobesidad/farmacología , Hipoglucemiantes/uso terapéutico , Hipoglucemiantes/farmacología , Diabetes Mellitus Tipo 2/tratamiento farmacológico , Microbioma Gastrointestinal/efectos de los fármacos , AnimalesRESUMEN
Isoelectrically precipitated chickpea protein isolate (CPI) and its combination with maltodextrin (MD) were investigated for the ability to form and stabilize cumin seed oil emulsions. Solubility, net surface charge, emulsion activity/stability indices, and creaming stability of CPI at a pH of 3.0-9.0 were evaluated. Optimum conditions for minimum cream separation were identified as: 0.19% CPI and 6.83% oil concentrations. Cumin (Cuminum cyminum L.) seed essential oil was microencapsulated within the CPI-MD matrix via spray drying. Effects of CPI-MD matrix formulation on the physicochemical characteristics and volatile composition of the microencapsules were investigated. CPI-MD matrices had positive effects on microcapsule properties such as relatively lower surface oil, higher encapsulation efficiency (EE), and oil retention. Approximately 86.6-96.4% oil retention and 90.9-98.4% EE were achieved. Optimum conditions for maximized oil retention (92.9%) and EE (98.6%) were identified as: 2.1% CPI, 14.8% essential oil, and 35% MD. GC-MS analysis of microcapsules was carried out to determine the changes in volatile composition during spray drying. Cymene, α-pinene, ß-pinene, sabinene, terpinene, terpineol, phellandrene, and cumin aldehyde were determined as the major components. Optimized design showed the highest EE and minimal changes in the volatile composition of cumin seed essential oil.
RESUMEN
Emulsion-based delivery systems (EBDSs) can be used as effective carriers for bioactive compounds (bioactives). Recent studies have shown that plant proteins (PLPs) have the potential to be utilized as stabilizers of emulsions for loading, protection and delivery of bioactives. Different strategies combining physical, chemical and biological techniques can be applied for alteration of the structural characteristics and improving the emulsification and encapsulation performance of PLPs. The stability, release, and bioavailability of the encapsulated bioactives can be tailored via optimizing the processing conditions and formulation of the emulsions. This paper presents cutting-edge information on PLP-based emulsions carrying bioactives in terms of their preparation methods, physicochemical characteristics, stability, encapsulation efficiency and release behavior of bioactives. Strategies applied for improvement of emulsifying and encapsulation properties of PLPs used in EBDSs are also reviewed. Special emphasis is given to the use of PLP-carbohydrate complexes for stabilizing bioactive-loaded emulsions.
Asunto(s)
Proteínas de Plantas , Emulsiones/química , Disponibilidad BiológicaRESUMEN
Wastes and by-products of nuts, seeds, cereals and legumes carry a unique potential for valorization into value-added ingredients due to their protein, dietary fiber, antioxidant, vitamin and mineral contents. The most crucial factor in the recovery of value-added ingredients and bioactives from the wastes and by-products is the utilization of the most efficient extraction technique. This work is an overview of the classification of wastes and by-products of nuts, seeds, cereals and legumes processing, the methods used in the extraction of valuable compounds such as proteins, dietary fibers, phenolics, flavonoids and other bioactives. This chapter provides insights on the promising applications of extracted ingredients in various end products. A special emphasis is given to the challenges and improvement methods for extraction of value-added compounds from wastes and by-products of nuts, seeds, cereals and legumes processing.
Asunto(s)
Fabaceae , Nueces , Grano Comestible , Semillas , VerdurasRESUMEN
This study examined the amino-acid profile, secondary structure, and physicochemical and functional properties of proteins isolated from Anatolian chickpea landraces. Secondary objective of the study was to determine whether a relationship exists between the amino-acid composition and physicochemical and functional properties. Aspartic acid and glutamic acid were the dominant amino acids, while the isolates were deficient in methionine. Secondary structures were determined by Fourier transform infrared spectroscopy, where the ß-sheet was shown to be dominant. The denaturation temperature of the isolates was between 87 and 145 °C, and the highest net surface charge (≃28.6 mV) and solubility (â¼95.0%) were observed at pH 9.0-10.0. The isolates' water-holding capacity varied between 2.1 and 2.7 g water/g protein, whereas their oil-holding capacity ranged between 3.4 and 4.4 g oil/g protein. Emulsion capacity, emulsifying activity, and the stability indices of isolates were found to be between 401.2 and 469.1 g oil/g protein, 14.5 and 25.7 m2/g, and 45.7 and 146.9 min, respectively. Isolates of Hisar and Erzincan chickpeas exhibited good emulsifying properties. The Yasa isolate had a relatively high hydrophobic amino-acid content and delivered the best gelation performance. Overall, significant differences in the characteristics of proteins were observed among the different chickpea landraces studied.
RESUMEN
Pushed by the environmental pollution and health hazards of plastic packaging, the development of biodegradable food packaging films (FPFs) is a necessary and sustainable trend for social development. Most protein molecules have excellent film-forming properties as natural polymer matrices, and the assembled films have excellent barrier properties, but show defects such as low water resistance and poor mechanical properties. In order to improve the performance of protein-based films, transglutaminase (TG) is used as a safe and green cross-linking (CL) agent. This work covers recent developments on TG cross-linked protein-based FPFs, mainly comprising proteins of animal and plant origin, including gelatin, whey protein, zein, soy proteins, bitter vetch protein, etc. The chemical properties and reaction mechanism of TG are briefly introduced, focusing on the effects of TG CL on the physicochemical properties of different protein-based FPFs, including barrier properties, water resistance, mechanical properties and thermal stability. It is concluded that the addition of TG can significantly improve the physical and mechanical properties of protein-based films, mainly improving their water resistance, barrier, mechanical and thermal properties. It is worth noting that the effect of TG on the properties of protein-based films is not only related to the concentration of TG added, but also related to CL temperature and other factors. Moreover, TG can also be used in combination with other strategies to improve the properties of protein-based films.
Asunto(s)
Embalaje de Alimentos , Transglutaminasas , Animales , Transglutaminasas/química , Resistencia a la Tracción , Agua , Gelatina/químicaRESUMEN
Electrospun fibers (EFs) have emerged as promising one-dimensional materials for a myriad of research/commercial applications due to their outstanding structural and physicochemical features. Polymers of either synthetic or natural precursors are applied to design EFs as carriers for bioactive compounds. For engineering food systems, it is crucial to exploit polymers characterized by non-toxicity, non-immunogenicity, biocompatibility, slow/controllable biodegradability, and structural integrity. The unique attributes of protein-based biomaterials endow a wide diversity of desirable features to EFs for meeting the requirements of advanced food/biomedical applications. In this review paper, after an overview on electrospinning, different protein materials (plant- and animal-based) as biodegradable/biocompatible building blocks for designing EFs will be highlighted. The potential application of protein-based EFs in loading bioactive compounds with the intention to inspire interests in both academia and industry will be summarized. This review concludes with a discussion of prevailing challenges in using protein EFs for the bioactive vehicle development.
RESUMEN
Challenges for the food/non-food applications of starch mostly arise from its low stability against severe processing conditions (i.e. elevated temperatures, pH variations, intense shear forces), inordinate retrogradability, as well as restricted applicability. These drawbacks have been addressed through the modification of starch. The escalating awareness of individuals toward the presumptive side effects of chemical modification approaches has engrossed the attention of scientists to the development of physical modification procedures. In this regard, starch treatment via ionizing (i.e. gamma, electron beam, and X-rays) and non-ionizing (microwave, radiofrequency, infrared, ultraviolet) radiations has been introduced as a potent physical strategy offering new outstanding attributes to the modified product. Ionizing radiations, through dose-dependent pathways, are able to provoke depolymerization or cross-linking/grafting reactions to the starch medium. While non-ionizing radiations could modify the starch attributes by changing the morphology/architecture of granules and inducing reorientation/rearrangement in the molecular order of starch amorphous/crystalline fractions.
RESUMEN
Wastes and byproducts of pulse processing carry a potential for utilization as raw materials for extraction of protein ingredients. This work is an overview of the extraction and fractionation techniques used for obtaining protein ingredients from wastes and byproducts of pulse processing, and it presents several characteristics of proteins extracted in terms of composition, nutritional properties, and functional properties. Several extraction methods have been applied to obtain protein ingredients from pulse processing wastes and byproducts. Each extraction technique is indicated to have significant effects on protein composition and functionality which could also affect the performance of proteins in different food applications. Versatile end product applications of protein ingredients obtained from pulse processing wastes and byproducts are yet to be discovered. Research is lacking on the limitations and improvement methods for using wastes and byproducts of pulses for protein extraction. This review provides insights into the possible applications of innovative extraction technologies for obtaining protein ingredients from wastes and byproducts of pulses. Further research has to focus on various modification techniques that can be applied to improve the functional, nutritional, and sensory properties of proteins extracted from pulse processing wastes and byproducts.
RESUMEN
The goal of this research was to determine the physicochemical and emulsifying properties of pea protein, gum arabic, and maltodextrin and to investigate their potential for stabilizing black pepper seed oil emulsions and acting as carrier materials for spray dried microcapsules. The moisture content and water activity of pea protein and maltodextrin (â¼5.5 g/100 g and â¼0.22) were found to be significantly lower than that of gum arabic (11.5 g/100 g and 0.46) whereas the glass transition temperatures of pea protein and maltodextrin (â¼99.4 â) was significantly higher than that of gum arabic (72 â). Pea protein showed the highest viscosity (53.8 mPa s), the lowest surface tension (42.5 mN/m), and interfacial tension (10.5 mN/m) among the biopolymer materials studied. A mixture design was employed to investigate the effect of biopolymer formulation on droplet size and creaming stability of black pepper seed oil emulsions. Stable emulsions with relatively smaller droplet size were spray dried to produce microcapsules. Spray dried black pepper seed oil microcapsules produced with 1% pea protein and 39% maltodextrin had low surface oil (â¼0.8%) and high encapsulation efficiency (95%). The results of this study suggest that pea protein in combination with maltodextrin can be used as carrier materials in encapsulation of black pepper seed oil.
Asunto(s)
Composición de Medicamentos/métodos , Emulsiones/química , Proteínas de Guisantes , Piper nigrum/química , Aceites de Plantas , Polisacáridos , Semillas/química , Biopolímeros/química , Cápsulas , Desecación , Aromatizantes , Goma Arábiga , Tamaño de la Partícula , Especias , Temperatura de Transición , Viscosidad , AguaRESUMEN
Double or multiple emulsions have been under study for several decades, due to the possibility of encapsulation and controlled release of various bioactive compounds. This contribution focuses on the decisive parameters for encapsulation and release in double emulsions by considering different amino acids at different environmental conditions. Laser diffraction analysis showed that the double emulsion average droplet size increased from 50 up to 90 µm after 32 days of storage. The emulsions at 4 °C showed a higher increase compared to 37 °C. Dilution in SDS solution revealed that this droplet size increase was due to aggregation rather than coalescence. The results showed that there was no significant change in the entrapped water volume fraction of the double emulsions during 2 weeks of storage. Amino acids were encapsulated within the internal aqueous phase with an efficiency of at least 80%. Regarding the release of the entrapped amino acids, it was found that both the temperature and the hydrophobicity of the amino acid had a significant effect. Fastest release was found at the highest temperature studied (i.e. 37 °C), which was thought to be due to the higher solubility and faster diffusion rate of the amino acid in the oil phase. As hydrophobicity increased, the released amino acid concentration also increased. The pH, on the other hand, did not have a significant effect on the release within the pH range considered (i.e. 7-10). The constant internal water volume fraction, together with the significant effect of temperature and hydrophobicity, indicated that the main release mechanism of amino acids in double emulsions is by direct diffusion from the internal to the external aqueous phase.
Asunto(s)
Aminoácidos , Emulsiones , Interacciones Hidrofóbicas e Hidrofílicas , Solubilidad , TemperaturaRESUMEN
Heart and blood vessels disorders comprise one of the main causes of death worldwide. Pharmacologically active natural compounds have been used as a complementary therapy in cardiovascular disease around the world in a traditional way. Dietary, natural bioactive compounds, as well as healthy lifestyles, are considered to prevent coronary artery diseases. Pre-clinical and clinical studies reported that consumption of plant-food bioactive derivatives including polyphenolic compounds, peptides, oligosaccharides, vitamins, unsaturated fatty acids possess protective effects on cardiovascular diseases. This review aims to summarize the cardiovascular risk factors, pre-clinical studies and clinical trials related to cardioprotective properties of the plant-food-derived bioactive compounds. Molecular mechanisms by the natural bioactive compounds exert their cardiovascular protective properties have also been highlighted.
Asunto(s)
Enfermedades Cardiovasculares/fisiopatología , Dieta , Estilo de Vida , Plantas Comestibles , Ensayos Clínicos como Asunto , HumanosRESUMEN
Flaxseed oil was microencapsulated employing a wall material matrix of either chickpea (CPI) or lentil protein isolate (LPI) and maltodextrin using a benchtop spray dryer. Effects of emulsion formulation (oil, protein and maltodextrin levels) and protein source (CPI vs LPI) on the physicochemical characteristics, oxidative stability, and release properties of the resulting capsules were investigated. Microcapsule formulations containing higher oil levels (20% oil, 20% protein, 60% maltodextrin) were found to have higher surface oil and lower encapsulation efficiencies. Overall, LPI-maltodextrin capsules gave higher flaxseed oil encapsulation efficiencies (â¼88.0%) relative to CPI-maltodextrin matrices (â¼86.3%). However, both designs were found to provide encapsulated flaxseed oil protection against oxidation over a 25 d room temperature storage study relative to free oil. Overall, â¼37.6% of encapsulated flaxseed oil was released after 2 h under simulated gastric fluid, followed by the release of an additional â¼46.6% over a 3 h period under simulated intestinal fluid conditions.