RESUMEN
Tall trees are key drivers of ecosystem processes in tropical forest, but the controls on the distribution of the very tallest trees remain poorly understood. The recent discovery of grove of giant trees over 80 meters tall in the Amazon forest requires a reevaluation of current thinking. We used high-resolution airborne laser surveys to measure canopy height across 282,750 ha of old-growth and second-growth forests randomly sampling the entire Brazilian Amazon. We investigated how resources and disturbances shape the maximum height distribution across the Brazilian Amazon through the relations between the occurrence of giant trees and environmental factors. Common drivers of height development are fundamentally different from those influencing the occurrence of giant trees. We found that changes in wind and light availability drive giant tree distribution as much as precipitation and temperature, together shaping the forest structure of the Brazilian Amazon. The location of giant trees should be carefully considered by policymakers when identifying important hot spots for the conservation of biodiversity in the Amazon.
Asunto(s)
Ecosistema , Árboles , Biodiversidad , Brasil , Bosques , Clima TropicalRESUMEN
The Amazon Forest, the largest contiguous tropical forest in the world, stores a significant fraction of the carbon on land. Changes in climate and land use affect total carbon stocks, making it critical to continuously update and revise the best estimates for the region, particularly considering changes in forest dynamics. Forest inventory data cover only a tiny fraction of the Amazon region, and the coverage is not sufficient to ensure reliable data interpolation and validation. This paper presents a new forest above-ground biomass map for the Brazilian Amazon and the associated uncertainty both with a resolution of 250 meters and baseline for the satellite dataset the year of 2016 (i.e., the year of the satellite observation). A significant increase in data availability from forest inventories and remote sensing has enabled progress towards high-resolution biomass estimates. This work uses the largest airborne LiDAR database ever collected in the Amazon, mapping 360,000 km2 through transects distributed in all vegetation categories in the region. The map uses airborne laser scanning (ALS) data calibrated by field forest inventories that are extrapolated to the region using a machine learning approach with inputs from Synthetic Aperture Radar (PALSAR), vegetation indices obtained from the Moderate-Resolution Imaging Spectroradiometer (MODIS) satellite, and precipitation information from the Tropical Rainfall Measuring Mission (TRMM). A total of 174 field inventories geolocated using a Differential Global Positioning System (DGPS) were used to validate the biomass estimations. The experimental design allowed for a comprehensive representation of several vegetation types, producing an above-ground biomass map varying from a maximum value of 518 Mg ha-1, a mean of 174 Mg ha-1, and a standard deviation of 102 Mg ha-1. This unique dataset enabled a better representation of the regional distribution of the forest biomass and structure, providing further studies and critical information for decision-making concerning forest conservation, planning, carbon emissions estimate, and mechanisms for supporting carbon emissions reductions.
Asunto(s)
Biomasa , Bosques , Tecnología de Sensores Remotos , Brasil , Carbono/análisis , Tecnología de Sensores Remotos/métodos , Clima TropicalRESUMEN
BACKGROUND: The application of different approaches calculating the anthropogenic carbon net flux from land, leads to estimates that vary considerably. One reason for these variations is the extent to which approaches consider forest land to be "managed" by humans, and thus contributing to the net anthropogenic flux. Global Earth Observation (EO) datasets characterising spatio-temporal changes in land cover and carbon stocks provide an independent and consistent approach to estimate forest carbon fluxes. These can be compared against results reported in National Greenhouse Gas Inventories (NGHGIs) to support accurate and timely measuring, reporting and verification (MRV). Using Brazil as a primary case study, with additional analysis in Indonesia and Malaysia, we compare a Global EO-based dataset of forest carbon fluxes to results reported in NGHGIs. RESULTS: Between 2001 and 2020, the EO-derived estimates of all forest-related emissions and removals indicate that Brazil was a net sink of carbon (- 0.2 GtCO2yr-1), while Brazil's NGHGI reported a net carbon source (+ 0.8 GtCO2yr-1). After adjusting the EO estimate to use the Brazilian NGHGI definition of managed forest and other assumptions used in the inventory's methodology, the EO net flux became a source of + 0.6 GtCO2yr-1, comparable to the NGHGI. Remaining discrepancies are due largely to differing carbon removal factors and forest types applied in the two datasets. In Indonesia, the EO and NGHGI net flux estimates were similar (+ 0.6 GtCO2 yr-1), but in Malaysia, they differed in both magnitude and sign (NGHGI: -0.2 GtCO2 yr-1; Global EO: + 0.2 GtCO2 yr-1). Spatially explicit datasets on forest types were not publicly available for analysis from either NGHGI, limiting the possibility of detailed adjustments. CONCLUSIONS: By adjusting the EO dataset to improve comparability with carbon fluxes estimated for managed forests in the Brazilian NGHGI, initially diverging estimates were largely reconciled and remaining differences can be explained. Despite limited spatial data available for Indonesia and Malaysia, our comparison indicated specific aspects where differing approaches may explain divergence, including uncertainties and inaccuracies. Our study highlights the importance of enhanced transparency, as set out by the Paris Agreement, to enable alignment between different approaches for independent measuring and verification.
RESUMEN
BACKGROUND: Brazilian Amazon forests contain a large stock of carbon that could be released into the atmosphere as a result of land use and cover change. To quantify the carbon stocks, Brazil has forest inventory plots from different sources, but they are unstandardized and not always available to the scientific community. Considering the Brazilian Amazon extension, the use of remote sensing, combined with forest inventory plots, is one of the best options to estimate forest aboveground biomass (AGB). Nevertheless, the combination of limited forest inventory data and different remote sensing products has resulted in significant differences in the spatial distribution of AGB estimates. This study evaluates the spatial coverage of AGB data (forest inventory plots, AGB maps and remote sensing products) in undisturbed forests in the Brazilian Amazon. Additionally, we analyze the interconnection between these data and AGB stakeholders producing the information. Specifically, we provide the first benchmark of the existing field plots in terms of their size, frequency, and spatial distribution. RESULTS: We synthesized the coverage of forest inventory plots, AGB maps and airborne light detection and ranging (LiDAR) transects of the Brazilian Amazon. Although several extensive forest inventories have been implemented, these AGB data cover a small fraction of this region (e.g., central Amazon remains largely uncovered). Although the use of new technology such as airborne LiDAR cover a significant extension of AGB surveys, these data and forest plots represent only 1% of the entire forest area of the Brazilian Amazon. CONCLUSIONS: Considering that several institutions involved in forest inventories of the Brazilian Amazon have different goals, protocols, and time frames for forest surveys, forest inventory data of the Brazilian Amazon remain unstandardized. Research funding agencies have a very important role in establishing a clear sharing policy to make data free and open as well as in harmonizing the collection procedure. Nevertheless, the use of old and new forest inventory plots combined with airborne LiDAR data and satellite images will likely reduce the uncertainty of the AGB distribution of the Brazilian Amazon.
RESUMEN
Very few studies have been devoted to understanding the digital terrain model (DTM) creation for Amazon forests. DTM has a special and important role when airborne laser scanning is used to estimate vegetation biomass. We examined the influence of pulse density, spatial resolution, filter algorithms, vegetation density and slope on the DTM quality. Three Amazonian forested areas were surveyed with airborne laser scanning, and each original point cloud was reduced targeting to 20, 15, 10, 8, 6, 4, 2, 1, 0.75, 0.5 and 0.25 pulses per square meter based on a random resampling process. The DTM from resampled clouds was compared with the reference DTM produced from the original LiDAR data by calculating the deviation pixel by pixel and summarizing it through the root mean square error (RMSE). The DTM from resampled clouds were also evaluated considering the level of agreement with the reference DTM. Our study showed a clear trade-off between the return density and the horizontal resolution. Higher forest canopy density demanded higher return density or lower DTM resolution.
São poucos os estudos dedicados a entender a criação de modelo digital de terreno (MDT) para florestas amazônicas. O MDT tem uma importante função quando o escaneamento laser aerotransportado é usado para estimar a biomassa da vegetação. Examinamos a relação da densidade de pulsos, resolução espacial, algoritmos de filtragem, densidade da vegetação e inclinação do terreno com a qualidade do MDT. Três áreas de floresta amazônica foram sobrevoadas usando LiDAR aerotransportado. Cada nuvem de dados original teve sua densidade reduzida objetivando 20; 15; 10; 8; 6; 4; 2; 1; 0,75; 0,5 e 0,25 pulsos por metro quadrado, utilizando um processo de reamostragem aleatória. Os MDTs das nuvens reamostradas foram comparados com o MDT de referência, produzido a partir da nuvem original, calculando o desvio pixel a pixel e resumindo-o por meio do erro padrão da estimativa (RMSE). Os MDTs das nuvens reamostradas também foram avaliados quanto ao nível de correspondência com o MDT de referência. Houve uma clara compensação entre densidade de pontos e resolução horizontal. Dosséis mais densos exigem uma maior densidade de retornos, ou MDT com menor resolução.
Asunto(s)
Análisis del Suelo , Mapeo Geográfico , Sistemas de Información Geográfica , Brasil , Ecosistema AmazónicoRESUMEN
Em um grupo de 104 mulheres submetidas a histerectomia abdominal total eletiva na Clínica Ginecológica do Hospital das Clínicas da Universidade Federal de Pernambuco, entre janeiro de 1988 a dezembro de 1989, observamos, em estudo retrospectivo, que o uso de antibiótico profilático com cefalotina foi válido quando administrado 1 g em dose única, por via endovenosa (IV), na induçäo anestésica, tendo sido significativamente mais eficaz quando esta dose da induçäo foi complementada com sete doses de 1 g a cada seis horas.