RESUMEN
Transforming CO2 into valuable chemicals is an inevitable trend in our current society. Among the viable end-uses of CO2, fixing CO2 as carbon or carbonates via Li-CO2 chemistry could be an efficient approach, and promising achievements have been obtained in catalyst design in the past. Even so, the critical role of anions/solvents in the formation of a robust solid electrolyte interphase (SEI) layer on cathodes and the solvation structure have never been investigated. Herein, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) in two common solvents with various donor numbers (DN) have been introduced as ideal examples. The results indicate that the cells in dimethyl sulfoxide (DMSO)-based electrolytes with high DN possess a low proportion of solvent-separated ion pairs and contact ion pairs in electrolyte configuration, which are responsible for fast ion diffusion, high ionic conductivity, and small polarization. The 3 M DMSO cell delivered the lowest polarization of 1.3 V compared to all the tetraethylene glycol dimethyl ether (TEGDME)-based cells (about 1.7 V). In addition, the coordination of the O in the TFSI- anion to the central solvated Li+ ion was located at around 2 Å in the concentrated DMSO-based electrolytes, indicating that TFSI- anions could access the primary solvation sheath to form an LiF-rich SEI layer. This deeper understanding of the electrolyte solvent property for SEI formation and buried interface side reactions provides beneficial clues for future Li-CO2 battery development and electrolyte design.
RESUMEN
Large amounts of wastewater containing low-concentration (<10 ppm) rare-earth ions (REIs) are discharged annually in China's rare-earth mining and processing industry, resulting in severe environmental pollution and economic losses. Hence, achieving efficient selective recovery of low-concentration REIs from REIs-containing wastewater is essential for environmental protection and resource recovery. In this study, a pseudocapacitance system was designed for highly efficient capacitive selective recovery of REIs from wastewater using the titanium dioxide/P/C (TiO2/P/C) composite electrode, which exhibited over 99% recovery efficiency for REIs, such as Eu3+, Dy3+, Tb3+, and Lu3+ in mixed solution. This system maintained high efficiency and more than 90 times the enrichment concentration of REIs even after 100 cycles. Ti4+ of TiO2 was reduced to Ti3+ of Ti3O5 under forward voltage in the system, which trapped the electrons of phosphorus site and caused it to be oxidized to phosphate with a strong affinity for REIs, thus improving the selectivity of REIs. Under reverse voltage, Ti3O5 was oxidized to TiO2, which transferred electrons to phosphate and transformed to the phosphorus site, resulting in the desorption and enrichment of REIs and the regeneration of the electrode. This study provides a promising method for the efficient recovery of REIs from wastewater.
Asunto(s)
Electrodos , Metales de Tierras Raras , Fósforo , Titanio , Aguas Residuales , Aguas Residuales/química , Metales de Tierras Raras/química , Fósforo/química , Adsorción , Titanio/química , Contaminantes Químicos del Agua/química , IonesRESUMEN
Birnessite is ubiquitous in the natural environment where heavy metals are retained and easily transformed. The surface properties and structure of birnessite change with the changes in external environmental conditions, which also affects the fate of heavy metals. Clarifying the effect and mechanism of the birnessite phase transition process on heavy metals is the key to taking effective measures to prevent and control heavy metal pollution. Therefore, the four transformation pathways of birnessite are summarized first in this review. Second, the relationship between transformation pathways and environmental conditions is proposed. These relevant environmental conditions include abiotic (e.g., co-existing ions, pH, oxygen pressure, temperature, electric field, light, aging, pressure) and biotic factors (e.g., microorganisms, biomolecules). The phase transformation is achieved by the key intermediate of Mn(III) through interlayer-condensation, folding, neutralization-disproportionation, and dissolution-recrystallization mechanisms. The AOS (average oxidation state) of Mn and interlayer spacing are closely correlated with the phase transformation of birnessite. Last but not least, the mechanisms of heavy metals immobilization in the transformation process of birnessite are summed up. They involve isomorphous substitution, redox, complexation, hydration/dehydration, etc. The transformation of birnessite and its implication on heavy metals will be helpful for understanding and predicting the behavior of heavy metals and the crucial phase of manganese oxides/hydroxides in natural and engineered environments.
Asunto(s)
Manganeso , Metales Pesados , Manganeso/química , Adsorción , Metales Pesados/química , Óxidos/química , Compuestos de Manganeso/química , Oxidación-ReducciónRESUMEN
Electroreduction of nitric oxide (NO) to NH3 (NORR) has gained extensive attention for the sake of low carbon emission and air pollutant treatment. Unfortunately, NORR is greatly hindered by its sluggish kinetics, especially under low concentrations of NO. Herein, we developed a chlorine (Cl) vacancy strategy to overcome this limitation over FeOCl nanosheets (FeOCl-VCl ). Density functional theory (DFT) calculations revealed that the Cl vacancy resulted in defective Fe with sharp d-states characteristics in FeOCl-VCl to enhance the absorption and activation of NO. In situ X-ray absorption near-edge structure (XANES) and attenuated total reflection-infrared spectroscopy (ATR-IR) verified the lower average oxidation state of defective Fe to enhance the electron transfer for NO adsorption/activation and facilitate the generation of key NHO and NHx intermediates. As a result, the FeOCl-VCl exhibited superior NORR activities with the NH3 Faradaic efficiency up to 91.1 % while maintaining a high NH3 yield rate of 455.4â µg cm-2 h-1 under 1.0â vol % NO concentration, competitive with those of previously reported literatures under higher NO concentration. Further, the assembled Zn-NO battery utilizing FeOCl-VCl as cathode delivered a record peak power density of 6.2â mW cm-2 , offering a new route for simultaneous NO removal, NH3 production, and energy supply.
RESUMEN
The Li3MX6 compounds (M=Sc, Y, In; X=Cl, Br) are known as promising ionic conductors due to their compatibility with typical metal oxide cathode materials. In this study, we have successfully synthesized γ-Li3ScCl6 using high pressure for the first time in this family. Structural analysis revealed that the high-pressure polymorph crystallizes in the polar and chiral space group P63mc with hexagonal close-packing (hcp) of anions, unlike the ambient-pressure α-Li3ScCl6 and its spinel analog with cubic closed packing (ccp) of anions. Investigation of the known Li3MX6 family further revealed that the cation/anion radius ratio, rM/rX, is the factor that determines which anion sublattice is formed and that in γ-Li3ScCl6, the difference in compressibility between Sc and Cl exceeds the ccp rM/rX threshold under pressure, enabling the ccp-to-hcp conversion. Electrochemical tests of γ-Li3ScCl6 demonstrate improved electrochemical reduction stability. These findings open up new avenues and design principles for lithium solid electrolytes, enabling routes for materials exploration and tuning electrochemical stability without compositional changes or the use of coatings.
RESUMEN
Air pollutant emissions represent a critical challenge in the green development of the non-ferrous metallurgy industry. This work studied the emission characteristics, formation mechanisms, phase transformation and separation of typical air pollutants, such as heavy metal particles, mercury, sulfur oxides and fluoride, during non-ferrous smelting. A series of purification technologies, including optimization of the furnace throat and high-temperature discharge, were developed to collaboratively control and recover fine particles from the flue gas of heavy metal smelting processes, including copper, lead and zinc. Significant improvements have been realized in wet scrubbing technology for removing mercury, fluoride and SO2 from flue gas. Gas-liquid sulfidation technology by applying H2S was invented to recycle the acid scrubbing wastewater more efficiently and in an eco-friendly manner. Based on digital technology, a source reduction method was designed for sulfur and fluoride control during the whole aluminum electrolysis process. New desulfurization technologies were developed for catalytic reduction of the sulfur content in petroleum coke at low temperature and catalytic reduction of SO2 to elemental sulfur. This work has established the technology for coupling multi-pollutant control and resource recovery from the flue gas from non-ferrous metallurgy, which provides the scientific theoretical basis and application technology for the treatment of air pollutants in the non-ferrous metallurgy industry.
Asunto(s)
Contaminantes Atmosféricos , Contaminación del Aire , Contaminantes Ambientales , Mercurio , Gases , Fluoruros , Metalurgia , Contaminantes Atmosféricos/análisis , Mercurio/análisis , Azufre , Tecnología , Contaminación del Aire/prevención & controlRESUMEN
Tremendous progress has been made in the field of electrochemical energy storage devices that rely on potassium-ions as charge carriers due to their abundant resources and excellent ion transport properties. Nevertheless, future practical developments not only count on advanced electrode materials with superior electrochemical performance, but also on competitive costs of electrodes for scalable production. In the past few decades, advanced carbon materials have attracted great interest due to their low cost, high selectivity, and structural suitability and have been widely investigated as functional materials for potassium-ion storage. This article provides an up-to-date overview of this rapidly developing field, focusing on recent advanced and mechanistic understanding of carbon-based electrode materials for potassium-ion batteries. In addition, we also discuss recent achievements of dual-ion batteries and conversion-type K-X (X=O2 , CO2 , S, Se, I2 ) batteries towards potential practical applications as high-voltage and high-power devices, and summarize carbon-based materials as the host for K-metal protection and possible directions for the development of potassium energy-related devices as well. Based on this, we bridge the gaps between various carbon-based functional materials structure and the related potassium-ion storage performance, especially provide guidance on carbon material design principles for next-generation potassium-ion storage devices.
RESUMEN
Tetrafluoromethane (CF4 ), the simplest perfluorocarbon (PFC), has the potential to exacerbate global warming. Catalytic hydrolysis is a viable method to degrade CF4 , but fluorine poisoning severely restricts both the catalytic performance and catalyst lifetime. In this study, Ga is introduced to effectively assists the defluorination of poisoned Al active sites, leading to highly efficient CF4 decomposition at 600 °C with a catalytic lifetime exceeding 1,000â hours. 27 Al and 71 Ga magic-angle spinning nuclear magnetic resonance spectroscopy (MAS NMR) showed that the introduced Ga exists as tetracoordinated Ga sites (GaIV ), which readily dissociate water to form Ga-OH. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and density function theory (DFT) calculations confirmed that Ga-OH assists the defluorination of poisoned Al active sites via a dehydration-like process. As a result, the Ga/Al2 O3 catalyst achieved 100 % CF4 decomposition keeping an ultra-long catalytic lifetime and outperforming reported results. This work proposes a new approach for efficient and long-term CF4 decomposition by promoting the regeneration of active sites.
RESUMEN
Electrochemical CO2 reduction is a promising way to mitigate CO2 emissions and close the anthropogenic carbon cycle. Among products from CO2RR, multicarbon chemicals, such as ethylene and ethanol with high energy density, are more valuable. However, the selectivity and reaction rate of C2 production are unsatisfactory due to the sluggish thermodynamics and kinetics of C-C coupling. The electric field and thermal field have been studied and utilized to promote catalytic reactions, as they can regulate the thermodynamic and kinetic barriers of reactions. Either raising the potential or heating the electrolyte can enhance C-C coupling, but these come at the cost of increasing side reactions, such as the hydrogen evolution reaction. Here, we present a generic strategy to enhance the local electric field and temperature simultaneously and dramatically improve the electric-thermal synergy desired in electrocatalysis. A conformal coating of â¼5 nm of polytetrafluoroethylene significantly improves the catalytic ability of copper nanoneedles (â¼7-fold electric field and â¼40 K temperature enhancement at the tips compared with bare copper nanoneedles experimentally), resulting in an improved C2 Faradaic efficiency of over 86% at a partial current density of more than 250 mA cm-2 and a record-high C2 turnover frequency of 11.5 ± 0.3 s-1 Cu site-1. Combined with its low cost and scalability, the electric-thermal strategy for a state-of-the-art catalyst not only offers new insight into improving activity and selectivity of value-added C2 products as we demonstrated but also inspires advances in efficiency and/or selectivity of other valuable electro-/photocatalysis such as hydrogen evolution, nitrogen reduction, and hydrogen peroxide electrosynthesis.
RESUMEN
Perfluorocarboxylic acids (PFCAs) exhibit strong persistence in sunlit surface waters and in radical-based treatment processes, where superoxide radical (O2â¢-) is an important and abundant reactive oxygen species. Given that the role of O2â¢- during the transformation of PFCAs remains largely unknown, we investigated the kinetics and mechanisms of O2â¢--mediated PFCAs attenuation through complementary experimental and theoretical approaches. The aqueous-phase rate constants between O2â¢- and C3-C8 PFCAs were measured using a newly designed in situ spectroscopic system. Mechanistically, bimolecular nucleophilic substitution (SN2) is most likely to be thermodynamically feasible, as indicated by density functional theory calculations at the CBS-QB3 level of theory. This pathway was then investigated by ab initio molecular dynamics simulation with free-energy samplings. As O2â¢- approaches PFCA, the C-F bond at the alpha carbon is spontaneously stretched, leading to the bond cleavage. The solvation mechanism for O2â¢--mediated PFCA degradation was also elucidated. Our results indicated that although the less polar solvent enhanced the nucleophilicity of O2â¢-, it also decreased the desolvation process of PFCAs, resulting in reduced kinetics. With these quantitative and mechanistic results, we achieved a defined picture of the O2â¢--initiated abatement of PFCAs in natural and engineered waters.
Asunto(s)
Fluorocarburos , Contaminantes Químicos del Agua , Purificación del Agua , Ácidos Carboxílicos/química , Fluorocarburos/química , Superóxidos , Agua/química , Contaminantes Químicos del Agua/química , Purificación del Agua/métodosRESUMEN
Microplastics (MPs) are one of the emerging contaminants in environmental media, and they have raised great concern because they are resistant to degradation and persist in ecosystems. Although numerous advanced technologies have been developed, suitable technologies are still lacking for degradation of widespread MPs in the natural environment. We have discovered that MPs can be degraded exceptionally rapidly in frozen environments. Taking polystyrene (PS) as an example, its degradation rate in ice (-20 °C) is surprisingly competitive to most artificial technologies. PS particles are trapped and squeezed to achieve excited state (3 PS*) in the narrow space of the liquid layer between ice crystals, which further react with the highly concentrated dioxygen to selectively produce singlet oxygen (1 O2 ). The 1 O2 boosts PS oxidation in the liquid layer thus further causing accelerated degradation at freezing temperature. This finding offers a highly efficient pathway for degradation of MPs and it sheds light on an unusual MPs disposal mechanisms in nature.
RESUMEN
Carbon dioxide electroreduction (CO2 RR) is a sustainable way of producing carbon-neutral fuels. Product selectivity in CO2 RR is regulated by the adsorption energy of reaction-intermediates. Here, we employ differential phase contrast-scanning transmission electron microscopy (DPC-STEM) to demonstrate that Sn heteroatoms on a Ag catalyst generate very strong and atomically localized electric fields. In situ attenuated total reflection infrared spectroscopy (ATR-IR) results verified that the localized electric field enhances the adsorption of *COOH, thus favoring the production of CO during CO2 RR. The Ag/Sn catalyst exhibits an approximately 100 % CO selectivity at a very wide range of potentials (from -0.5 to -1.1â V, versus reversible hydrogen electrode), and with a remarkably high energy efficiency (EE) of 76.1 %.
RESUMEN
Rhenium is one of the most valuable elements found in nature, and its capture and recycle are highly desirable for resource recovery. However, the effective and efficient collection of this material from industrial waste remains quite challenging. Herein, a tetraphenylmethane-based cationic polymeric network (CPN-tpm) nanotrap is designed, synthesized, and evaluated for ReO4- recovery. 3D building units are used to construct imidazolium salt-based polymers with positive charges, which yields a record maximum uptake capacity of 1133 mg g-1 for ReO4- collection as well as fast kinetics ReO4- uptake. The sorption equilibrium is reached within 20 min and a kd value of 8.5 × 105 mL g-1 is obtained. The sorption capacity of CPN-tpm remains stable over a wide range of pH values and the removal efficiency exceeds 60% for pH levels below 2. Moreover, CPN-tpm exhibits good recyclability for at least five cycles of the sorption-desorption process. This work provides a new route for constructing a kind of new high-performance polymeric material for rhenium recovery and rhenium-contained industrial wastewater treatment.
Asunto(s)
Renio , Aniones , Polímeros , Aguas ResidualesRESUMEN
Layered double hydroxide (LDH), the only anionic clay in the environment, plays a key role in natural ion transportation. The ion retention effect of LDHs was traditionally attributed to ion exchange with low affinity. Here, we demonstrated an ultrastrong interaction between anions and LDHs induced by their inherent nanoconfinement using chromium ore processing residue (COPR) that contained several Cr(VI)-bonded LDHs as a probe. Hydrocalumite (Ca/Al-Cl LDH) was verified as the primary phase for Cr(VI) retention through two types of interactions such as ion exchange and Cr-Ca coordination. More significantly, the confined spacing between two layers of hydrocalumite provided spatial restriction and shielding effects to the intercalated Cr(VI), which enhanced Cr-Ca coordination by shortening the bonding distance and modulating the binding angle to achieve the lowest bonding energy. Such enhancement boosted Cr(VI) affinity up to 3.2 × 105 mL/g, which was 1-3 orders of magnitudes higher than ion exchange. The universality of this mechanism was verified using another Mg/Al-Cl LDH and various anions. This study broke the traditional awareness of low ion affinities of LDHs limited by single ion exchange and disclosed an essential mechanism for unexpected ion retention effects of anionic clays in nature.
Asunto(s)
Cromo , Cromo/análisis , Arcilla , Intercambio IónicoRESUMEN
BACKGROUND: Cadmium is the most prevalent form of heavy metal contaminant globally and its exposure rises serious health concern. Chronic exposure to cadmium causes immune disturbances. However, few studies have addressed how it affects circulating immune cells, one of the most essential elements for the host defense system, at both population and molecular level. Therefore, this is the first single-cell transcriptomic analysis of the response of the human circulating immune system to plasma cadmium level. METHODS: We conducted a cross-sectional study in Hunan province, which has the highest level of cadmium land contamination in China. A total of 3283 individuals were eligible for analyzing the association between plasma cadmium levels and the monocyte counts and its subgroups. Another 780 individuals were assigned for validation. Thirty propensity-matched individuals without chronic disease from the lowest- and highest-quartile groups according to serum cadmium levels were selected for single-cell RNA sequencing (scRNA-seq) and flow cytometry analyses. Moreover, the monocyte phenotypic alterations in the heavy metal-exposed population were validated with a cecal ligation and puncture sepsis mouse model. RESULTS: From August 2016 to July 2017, we conducted a cross-sectional study to identify phenotypic alterations in peripheral immune cells in cadmium polluted areas in China. Monocyte percentages were negatively associated with plasma cadmium levels in multivariable linear regression analysis. Peripheral blood mononuclear cell scRNA-seq revealed that the CD14+ monocyte subset was dramatically reduced in the highest-quartile cadmium-exposed group. Moreover, we assessed different hallmarks of immune cell dysfunction-such as host defense capability, apoptotic signaling, cellular diversity and malignant gene expression in monocytes. Importantly, cadmium induced phenotypic alterations in the immune system were validated in the cecal ligation and puncture sepsis mouse model, in which chronic exposure to cadmium not only increased the death rate but also decreased monocyte numbers and the ability to clear bacterial infections. CONCLUSION: This transcriptomic analysis provides molecular information about how the most important hallmarks of immune cell dysfunction are affected by plasma cadmium level. The significant phenotypic alterations in monocytes serving as early indicators of increased susceptibility to infectious and malignant diseases.
Asunto(s)
Cadmio/toxicidad , Exposición a Riesgos Ambientales/estadística & datos numéricos , Contaminantes Ambientales/toxicidad , Monocitos/efectos de los fármacos , China , Estudios Transversales , Citometría de Flujo , Humanos , Recuento de Leucocitos , Leucocitos Mononucleares , Masculino , Monocitos/citología , TranscriptomaRESUMEN
Natural hydrogen (H2 ) has gained considerable attentions as a renewable energy resource to mitigate the globally increasing environmental concerns. Low-temperature serpentinization (<200 °C) as a typical water-rock reaction is a major source of the natural H2 . However, the reaction mechanism and the controlling step to product H2 remained unclear, which hinders the further utilization of natural H2 . Herein, we demonstrated that the H2 production rate could be determined by the Fe(OH)2 oxidation during low-temperature serpentinization. Moreover, the co-existence of Ni2+ could largely enhance the H2 production kinetics. With the addition of only 1 % Ni2+ , the H2 production rate was remarkably enhanced by about two orders of magnitude at 90 °C. D2 O isotopic experiment and theoretical calculations revealed that the enhanced H2 production kinetics could be attributed to the catalytic role of Ni2+ to promote the reduction of H2 O.
RESUMEN
Hexavalent chromium contamination is a global environmental issue and usually reoccurs in alkaline reduced chromite ore processing residues (rCOPR). The oxidation of Cr(III) solids in rCOPR is one possible cause but as yet little studied. Herein, we investigated the oxidation of Cr(OH)3, a typical species of Cr(III) in rCOPR, at alkaline pH (9-11) with δ-MnO2 under oxic/anoxic conditions. Results revealed three pathways for Cr(III) oxidation under oxic conditions: (1) oxidation by oxygen, (2) oxidation by δ-MnO2, and (3) catalytic oxidation by Mn(II). Oxidations in the latter two were efficient, and oxidation via Pathway 3 was continuous and increased dramatically with increasing pH. XANES data indicated feitknechtite (ß-MnOOH) and hausmannite (Mn3O4) were the reduction products and catalytic substances. Additionally, a kinetic model was established to describe the relative contributions of each pathway at a specific time. The simulation outcomes showed that Cr(VI) was mainly formed via Pathway 2 (>51%) over a short time frame (10 days), whereas in a longer-term (365 days), Pathway 3 predominated the oxidation (>78%) with an increasing proportion over time. These results suggest Cr(III) solids can be oxidized under alkaline oxic conditions even with a small amount of manganese oxides, providing new perspectives on Cr(VI) reoccurrence in rCOPR and emphasizing the environmental risks of Cr(III) solids in alkaline environments.
Asunto(s)
Compuestos de Manganeso , Óxidos , Cromo , Oxidación-ReducciónRESUMEN
Smelting wastewater is characterized with high concentration of toxic heavy metals and high acidity, which must be properly treated before discharge. Here, bioelectrochemical system (BES) coupled with thermoelectric generator (TEG) was first demonstrated to simultaneously treat organic wastewater and smelting wastewater by utilizing the simulated waste heat that was abundant in smelting factories. By modulating the input voltage generated from simulated waste heat via TEG to 0, 1.0 and 2.0 V, almost all the Cu2+, Cd2+ and Co2+ in smelting wastewater were sequentially recovered with a respective rate of 121.17, 158.20 and 193.87 mg L-1 d-1. Cu2+ was bioelectrochemically recovered as Cu0. While, Cd2+ and Co2+ were recovered by electrodeposition as Cd(OH)2, CdCO3 or Co(OH)2 on cathodic surface. High throughput sequencing analysis showed that the microbial community of anodic biofilm was greatly shifted after successive treatment by batch-mode. Desulfovibrio (17.00%), Megasphaera (11.81%), Geobacter (10.36%) and Propionibacterium (8.64%) were predominant genera in anodic biofilm enriched from activated sludge in BES before treatment. After successive treatment by batch-mode, Geobacter (34.76%), Microbacter (8.60%) and Desulfovibrio (5.33%) were shifted as the major genera. Economic analysis revealed that it was feasible to use TEG to substitute electrical grid energy to integrate with BES for wastewater treatment. In addition, literature review indicated that it was not uncommon for the coexistence of waste heat with typical pollutants (e.g. heavy metal ions and various biodegradation-resistant organic wastes) that could be treated by BES in different kinds of factories or geothermal sites. This study provides novel insights to expand the application potentials of BES by integrating with TEG to utilize widespread waste heat.
Asunto(s)
Reactores Biológicos/microbiología , Técnicas Electroquímicas/métodos , Metales Pesados/análisis , Aguas Residuales/química , Contaminantes Químicos del Agua/análisis , Purificación del Agua/métodos , Fuentes de Energía Bioeléctrica , Biopelículas/crecimiento & desarrollo , Electrodos , Geobacter/crecimiento & desarrollo , Calor , Aguas del Alcantarillado/microbiologíaRESUMEN
Biological nitrogen removal process could be affected due to the presence of heavy metals owing to their toxicity and accumulation in the sludge. In this study, the impact of Cu2+ shock on a long-term nitritation operation was investigated in an air-lift reactor with self-recirculation. Both the dynamics of microbial community and inhibition kinetics under Cu2+ stress were ascertained. The results showed that Cu2+ exerted severe inhibition on nitritation performance of an air-lift reactor (ALR) at 25 mg/L. The corresponding NH4+-N removal efficiency decreased to below 50%, which was mainly due to the variation of microbial community structure, especially the inhibition of nitrifiers like Nitrosomonas (the relative abundance decreased from 30% to 1% after Cu2+ inhibition). Kinetic parameters were obtained and compared after fitting the Haldane model. The long-term Cu2+ stress on the ALR aggravated the ammonium affinity and the resistance to substrate self-inhibition of the nitritation sludge, but reduced the resistance to Cu2+ inhibition. Furthermore, Cu2+ acted as uncompetitive inhibitor on nitritation process. Our results provide new insights into the nitritation characteristics under long-term Cu2+ stress.
Asunto(s)
Compuestos de Amonio , Microbiota , Reactores Biológicos , Cinética , Nitrógeno , Oxidación-Reducción , Aguas del AlcantarilladoRESUMEN
The role of soluble microbial products (SMP), the most important component of effluent organic matter from municipal wastewater treatment plants, in sulfate radical (SO4â¢-)-based advanced oxidation technologies (AOTs) remains substantially unclear. In this study, we first utilized a suite of macro- and microanalytical techniques to characterize the SMP from a membrane bioreactor for its fundamental molecular, spectroscopic, and reactivity properties. The degradation kinetics of three representative pharmaceuticals (i.e., naproxen, gemfibrozil, and sulfadiazine) in the presence of SMP was significantly reduced as compared to in its absence. Possible mechanisms for the interference by SMP in degrading these target compounds (TCs) were investigated. The low percentage of bound TCs to SMP ruled out the cage effect. The measurement of steady-state 1O2 concentration indicated that formation of 1O2 upon UV irradiation on SMP was not primarily responsible for the degradation of TCs. However, the comparative and quenching results reveal that SMP absorbs UV light acting as an inner filter toward the TCs, and meanwhile scavenges SO4â¢- with a high second-order rate constant of 2.48 × 108 MC-1 s-1.