RESUMEN
Wetland shorelines around the world are susceptible to wave erosion. Previous work has suggested that the lateral erosion rate of their cliff-like edges can be predicted as a function of intercepting waves, and yet numerous field studies have shown that other factors, for example, tidal currents or mass wasting of differing soil types, induce a wide range of variability. Our objective was to isolate the unique effects of wave heights, wavelengths, and water depths on lateral erosion rates and then synthesize a mechanistic understanding that can be applied globally. We found a potentially universal relationship, where the lateral erosion rates increase exponentially as waves increase in height but decrease exponentially as waves become longer in length. These findings suggest that wetlands and other sheltered coastlines likely experience outsized quantities of erosion, as compared to oceanic-facing coastlines.
RESUMEN
An open-water wave energy converter (OWEC) made of a new soft platform has been developed by combining piezoelectric macro-fiber composites (MFCs) and a low-cost elastomer. In the past decades, numerous types of water wave energy conversion platform have been developed and investigated, from buoys to overtopping devices. These harvesters mainly use electromagnetic-based generators, and they have faced challenges such as their enormous size, high deployment and maintenance costs, and negative effects on the environment. These problems hinder their practicality and competitiveness. In this paper, a soft open-water wave energy converter is introduced which integrates piezoelectric MFCs and bubble wrap into an elastomer sheet. The performance of the OWEC was investigated in a wave flume as a floatable structure. The maximum 29.7 µW energy harvested from the small OWEC represents a promising energy conversion performance at low frequencies (<2 Hz). The elastomer was able to protect the MFCs and internal electrical connections without any degradation during the experiment. In addition, the OWEC is a foldable structure, which can reduce the deployment costs in real-world applications. The combination of no maintenance, low fabrication cost, low deployment cost, and moderate energy harvesting capability may advance the OWEC platform to its real-world applications.
RESUMEN
A fiber optic reflectometer (FOR) technique featuring a single fiber probe is investigated for its feasibility of measuring the bubble velocity, diameter, and void fraction in a multiphase flow. The method is based on the interference of the scattered signal from the bubble surface with the Fresnel reflection signal from the tip of the optical fiber. Void fraction is obtained with a high accuracy if an appropriate correction is applied to compensate the underestimated measurement value. Velocity information is accurately obtained from the reflected signals before the fiber tip touches the bubble surface so that several factors affecting the traditional dual-tip probes such as blinding, crawling, and drifting effects due to the interaction between the probe and bubbles can be prevented. The coherent signals reflected from both the front and rear ends of a bubble can provide velocity information. Deceleration of rising bubbles and particles due to the presence of the fiber probe is observed when they are very close to the fiber tip. With the residence time obtained, the bubble chord length can be determined by analyzing the coherent signal for velocity determination before the deceleration starts. The bubble diameters are directly obtained from analyzing the signals of the bubbles that contain velocity information. The chord lengths of these bubbles measured by FOR represent the bubble diameters when the bubble shape is spherical or represent the minor axes when the bubble shape is ellipsoidal. The velocity and size of bubbles obtained from the FOR measurements are compared with those obtained simultaneously using a high speed camera.