Perovskite solar cells based on screen-printed thin films.

One potential advantage of perovskite solar cells (PSCs) is the ability to solution process the precursors and deposit films from solution1,2. At present, spin coating, blade coating, spray coating, inkjet printing and slot-die printing have been investigated to deposit hybrid perovskite thin films3-6. Here we expand the range of deposition methods to include screen-printing, enabled by a stable and viscosity-adjustable (40-44,000 cP) perovskite ink made from a methylammonium acetate ionic liquid solvent. We demonstrate control over perovskite thin-film thickness (from about 120 nm to about 1,200 nm), area (from 0.5 × 0.5 cm2 to 5 × 5 cm2) and patterning on different substrates. Printing rates in excess of 20 cm s-1 and close to 100% ink use were achieved. Using this deposition method in ambient air and regardless of humidity, we obtained the best efficiencies of 20.52% (0.05 cm2) and 18.12% (1 cm2) compared with 20.13% and 12.52%, respectively, for the spin-coated thin films in normal devices with thermally evaporated metal electrodes. Most notably, fully screen-printing devices with a single machine in ambient air have been successfully explored. The corresponding photovoltaic cells exhibit high efficiencies of 14.98%, 13.53% and 11.80% on 0.05-cm2, 1.00-cm2 and 16.37-cm2 (small-module) areas, respectively, along with 96.75% of the initial efficiency retained over 300 h of operation at maximum power point.

GLIM Criteria-Defined Malnutrition Informs on Survival of Nasopharyngeal Carcinoma Patients Undergoing Radiotherapy.

Studies regarding malnutrition in patients with nasopharyngeal carcinoma (NPC) using the Global Leadership Initiative in Malnutrition (GLIM) criteria are still limited. Our study aimed to investigate the prevalence of malnutrition using the GLIM criteria in NPC patients receiving radiotherapy and explore the relationship between pre-radiotherapy (pre-RT) malnutrition and survival. A total of 113 NPC patients were enrolled for nutritional assessment using the GLIM criteria at different radiotherapeutic time points, and related toxicities were graded. Regarding the results, 19 patients (16.8%) were malnourished before radiotherapy and 103 patients (91.2%) were malnourished at the end of radiotherapy. Among the phenotypic GLIM criteria, low fat-free muscle index (FFMI) before radiotherapy was associated with mucositis and radiodermatitis (p < 0.05). Importantly, patients with malnutrition before radiotherapy had significantly poorer 2-year progression free survival (PFS) than the patients being well-nourished (62.1% vs. 88.9%, p = 0.015). From the multivariate Cox regression model, being-well nourished before radiotherapy was the protective factor for PFS (HR: 0.27; 95%CI: 0.089-0.85; p = 0.023) and male was the risk factor for PFS (HR: 7.25; 95%CI: 1.548-34.00; p = 0.012). In conclusion, malnutrition according to the GLIM criteria is common in NPC patients undergoing radiotherapy, and pre-RT malnutrition is correlated with survival.Supplemental data for this article is available online at https://doi.org/10.1080/01635581.2022.2044059.

In Situ Interface Engineering for Highly Efficient Electron-Transport-Layer-Free Perovskite Solar Cells.

Electron-transport-layer free perovskite solar cells (ETL-free PSCs) have attracted great attention due to their low cost and simple manufacturing process. However, an additional interface layer has to be introduced, and the currently achieved efficiency remains far from full-structure PSCs. Here, we report an in situ interface engineering strategy by the methylammonium acetate (MAAc) ionic liquid perovskite precursor. We found that a dipole layer was in situ constructed through the physical adsorption of the residual MAAc polar molecules on the indium tin oxide electrode, which is significantly different from the treatment by the interface layer in previous reports. This allows a decrease of the effective work function and enables in situ band bending in the perovskite semiconductor. The in situ band bending facilitates charge collection and hinders interfacial charge recombination, leading to ETL-free PSCs with a maximum power conversion efficiency of 21.08%, which is the highest report to date.

Unraveling the Immune Regulatory Functions of USP5: Implications for Disease Therapy.

Ubiquitin-specific protease 5 (USP5) belongs to the ubiquitin-specific protease (USP) family, which uniquely recognizes unanchored polyubiquitin chains to maintain the homeostasis of monoubiquitin chains. USP5 participates in a wide range of cellular processes by specifically cleaving isopeptide bonds between ubiquitin and substrate proteins or ubiquitin itself. In the process of immune regulation, USP5 affects important cellular signaling pathways, such as NF-κB, Wnt/ß-catenin, and IFN, by regulating ubiquitin-dependent protein degradation. These pathways play important roles in immune regulation and inflammatory responses. In addition, USP5 regulates the activity and function of immunomodulatory signaling pathways via the deubiquitination of key proteins, thereby affecting the activity of immune cells and the regulation of immune responses. In the present review, the structure and function of USP5, its role in immune regulation, and the mechanism by which USP5 affects the development of diseases by regulating immune signaling pathways are comprehensively overviewed. In addition, we also introduce the latest research progress of targeting USP5 in the treatment of related diseases, calling for an interdisciplinary approach to explore the therapeutic potential of targeting USP5 in immune regulation.

TRPV Channels in Osteoarthritis: A Comprehensive Review.

Osteoarthritis (OA) is a debilitating joint disorder that affects millions of people worldwide. Despite its prevalence, our understanding of the underlying mechanisms remains incomplete. In recent years, transient receptor potential vanilloid (TRPV) channels have emerged as key players in OA pathogenesis. This review provides an in-depth exploration of the role of the TRPV pathway in OA, encompassing its involvement in pain perception, inflammation, and mechanotransduction. Furthermore, we discuss the latest research findings, potential therapeutic strategies, and future directions in the field, shedding light on the multifaceted nature of TRPV channels in OA.

Phase-Pure α-FAPbI3 Perovskite Solar Cells via Activating Lead-Iodine Frameworks.

Narrow bandgap cubic formamidine perovskite (α-FAPbI3) is widely studied for its potential to achieve record­breaking efficiency. However, its high preparation difficulty caused by lattice instability is criticized. A popular strategy for stabilizing the α-FAPbI3 lattice is to replace intrinsic FA+ or I- with smaller ions of MA+, Cs+, Rb+, and Br-, whereas this generally leads to broadened optical bandgap and phase separation. Studies show that ions substitution-free phase-pure α-FAPbI3 can achieve intrinsic phase stability. However, the challenging preparation of high-quality films has hindered its further development. Here, a facile synthesis of high-quality MA+, Cs+, Rb+, and Br--free phase-pure α-FAPbI3 perovskite film by a new solution modification strategy is reported. This enables the activation of lead-iodine (Pb─I) frameworks by forming the coated Pb⋯O network, thus simultaneously promoting spontaneous homogeneous nucleation and rapid phase transition from δ to α phase. As a result, the efficient and stable phase-pure α-FAPbI3 PSC is obtained through a one-step method without antisolvent treatment, with a record efficiency of 23.15% and excellent long-term operating stability for 500 h under continuous light stress.

Strategies for promoting tendon-bone healing: Current status and prospects.

Tendon-bone insertion (TBI) injuries are common, primarily involving the rotator cuff (RC) and anterior cruciate ligament (ACL). At present, repair surgery and reconstructive surgery are the main treatments, and the main factor determining the curative effect of surgery is postoperative tendon-bone healing, which requires the stable combination of the transplanted tendon and the bone tunnel to ensure the stability of the joint. Fibrocartilage and bone formation are the main physiological processes in the bone marrow tract. Therefore, therapeutic measures conducive to these processes are likely to be applied clinically to promote tendon-bone healing. In recent years, biomaterials and compounds, stem cells, cell factors, platelet-rich plasma, exosomes, physical therapy, and other technologies have been widely used in the study of promoting tendon-bone healing. This review provides a comprehensive summary of strategies used to promote tendon-bone healing and analyses relevant preclinical and clinical studies. The potential application value of these strategies in promoting tendon-bone healing was also discussed.

Efficacy and safety of odanacatib for osteoporosis treatment: a systematic review and meta-analysis.

PURPOSE: Osteoporosis is a metabolic bone disease that commonly results in middle-aged and elderly people following fractures. Odanacatib (ODN), a potential osteoporosis medication, was stopped in the Long-term Odanacatib Fracture Trial (LOFT) phase III study because it increased the risk of stroke. Herein, we conducted a systematic review and meta-analysis to further assess the efficacy and safety of ODN in osteoporosis treatment. METHODS: We searched the PubMed, EMBASE, Cochrane Library, and Web of Science, using the core search terms "osteoporosis" and "odanacatib." The primary outcomes were the percentage change in markers of bone turnover and bone formation as well as that in the bone mineral density (BMD) of the lumbar spine, hip, femoral neck, and greater trochanter. The secondary outcome was the risk of adverse events (AEs), used to explore the safety of ODN. RESULTS: Ten articles-all double-blinded, randomized, placebo-controlled trials-were included. All trials were considered to be of high quality if they met the inclusion and exclusion criteria. We found that ODN increases BMD in the lumbar spine, total hip, and femoral neck, whereas it decreases the concentration of serum C-telopeptides of type I collagen (sCTx) and urinary N-telopeptide/creatinine ratio (uNTx/Cr). We found no significant differences in total, drug-related, serious, or skin AEs between the ODN and control groups. However, significant differences in fracture and stroke AEs were found between the ODN and control groups. CONCLUSION: ODN is an appealing long-term osteoporosis treatment method; however, further research should focus on the potential increased risk of fracture and stroke.

Screen-Printing Technology for Scale Manufacturing of Perovskite Solar Cells.

As a key contender in the field of photovoltaics, third-generation thin-film perovskite solar cells (PSCs) have gained significant research and investment interest due to their superior power conversion efficiency (PCE) and great potential for large-scale production. For commercialization consideration, low-cost and scalable fabrication is of primary importance for PSCs, and the development of the applicable film-forming techniques that meet the above requirements plays a key role. Currently, large-area perovskite films are mainly produced by printing techniques, such as slot-die coating, inkjet printing, blade coating, and screen-printing. Among these techniques, screen printing offers a high degree of functional layer compatibility, pattern design flexibility, and large-scale ability, showing great promise. In this work, the advanced progress on applying screen-printing technology in fabricating PSCs from technique fundamentals to practical applications is presented. The fundamentals of screen-printing technique are introduced and the state-of-the-art studies on screen-printing different functional layers in PSCs and the control strategies to realize fully screen-printed PSCs are summarized. Moreover, the current challenges and opportunities faced by screen-printed perovskite devices are discussed. This work highlights the critical significance of high throughput screen-printing technology in accelerating the commercialization course of PSCs products.

Effects of Different Surgical Procedures on the Therapeutic Effects, Prognosis, and Major Complications of Acetabular Fractures in the Elderly of China: A Systematic Review and Meta-Analysis.

Objective: Different surgical approaches were systematically evaluated to provide an evidence-based medical rationale for the application and promotion of acetabular fractures in the elderly of China. Methods: Randomized controlled trials (RCT) of different surgical methods in the treatment of elderly acetabular fractures were searched in the PubMed, EMBASE, ScienceDirect, Cochrane Library, China Knowledge Network Database (CNKI), China VIP Database, Wanfang Database, and China Biomedical Literature Database (CBM). The search time threshold was set from the time the database was created to the current time. Investigators obtained data independently, and the bias risk of each included writing was reviewed using the Cochrane Manual 5.1.0 criterion. The meta data was analyzed using RevMan 5.4 statistical package. Results: 6 RCT articles were included in the end. A total of 445 samples were analyzed by meta. All the six RCT literatures included in this meta-analysis reported the baseline status of patients, only 3 RCT mentioned "random assignment" without any explanation, and the rest did not mention "random" information. The five studies included all gave detailed intervention measures. The number and reasons of blind method and lost follow-up or withdrawal were not described in detail in 6 RCT articles. Through the meta-analysis excellent and good rate between the experimental group and the control group through 6 RCT studies, the heterogeneity test results were chi2 = 6.11, df = 4, P = 0.19 > 0.05, and I2 = 35%, without obvious heterogeneity at Z = 2.68 and P = 0.007. These results suggested that the total hip arthroplasty application has the same excellent rate as other surgical treatment methods, indicating that total hip arthroplasty has a significant effect on the treatment of elderly acetabular fractures. Through the meta-analysis hip-joint function score, the heterogeneity test results were chi2 = 56.16, df = 4, P < 0.00001, and I 2 = 93%, with obvious heterogeneity. The great difference was discovered in hip function score between total hip arthroplasty and other surgical methods, showing that total hip arthroplasty can greatly improve hip-joint function. Then, the incidence of hip complications between the experimental cases and the control cases was calculated by meta. The heterogeneity test results were chi2 = 3.17, df = 4, P = 0.53 > 0.05, and I 2 = 0%, without remarkable heterogeneity at Z = 3.05 and P = 0.002. This demonstrated that a significant difference was observed in the complication incidence, indicating that total hip arthroplasty displayed a lower incidence of hip-joint functional complications. Conclusion: Total hip arthroplasty has a good prognosis and a low complication rate in the treatment of acetabular fractures in the elderly. However, more studies and longer follow-ups are needed to further validate the findings of this study.

Clinicopathological and prognostic significance of Fusobacterium nucleatum infection in colorectal cancer: a meta-analysis.

Background: This study aimed to clarify the relationship between F. nucleatum levels and the prognosis of CRC, which is still controversial. Methods: Relevant articles were searched on PubMed, Web of Science, PMC and Embase up to April 7, 2020. Outcomes of interest included clinical characteristics, molecular characteristic and survival analysis. HR (OR), odds ratios (OR) and 95% confidence interval (CI) were calculated to explore the prognostic value and relationship of clinical characteristics of Fusobacterium nucleatum in CRC. Results: A total of 3626 CRC patients from 13 eligible studies were included. High levels of F. nucleatum were associated with worse prognosis, as such parameters as overall survival (OS) (hazard ratio [HR] = 1.40, 95% confidence interval [CI]: 1.40 - 1.63, P < 0.0001), disease-free survival (DFS) (HR = 1.71, 95% CI: 1.29-2.26, P = 0.0002), and cancer-specific survival (OR= 1.93, 95% CI: 1.42-2.62, P <0.0001). F. nucleatum levels were related with T3-T4 stage (OR = 2.20, 95% CI: 1.66-2.91, P < 0.00001), M1 stage (OR = 2.11, 95% CI: 1.25-3.56, P = 0.005), poor tumor differentiation (OR = 1.83, 95% CI: 1.11-3.03, P =0.02), microsatellite instability-high (OR = 2.53, 95% CI: 1.53-4.20, P = 0.0003), and KRAS mutation (OR =1.27, 95% CI: 1.00-1.61, P=0.05) showed. Conclusions: High levels of F. nucleatum suggest a poor prognosis and are associated with tumor growth, distant metastasis, poor differentiation, MSI-high, and KRAS mutation in CRC patients.

[Application of composite tissue flaps pedicled with distal perforating branch of posterior tibial artery for repairing distal leg defects].

Objective: To investigate the clinical application and effectiveness of the composite tissue flaps pedicled with perforating branch of posterior tibial artery for repairing distal leg defects. Methods: Between September 2014 and August 2017, 12 patients with skin and bone defects of distal leg were repaired with the composite tissue flaps pedicled with perforating branch of posterior tibial artery. There were 8 males and 4 females with an average age of 41.3 years (range, 25-66 years). The causes of injury included traffic accident injury in 7 cases, heavy crushing injury in 2 cases, tibial osteomyelitis with soft tissue ulcer and necrosis in 2 cases, and bone and soft tissue defect after resection of bone tumor in 1 case. Eight patients underwent primary repair, and 4 patients underwent second-stage repair. The size ranged from 6 cm×4 cm to 10 cm×7 cm in skin flap, from 4.0 cm×2.5 cm to 8.0 cm×6.0 cm in muscle flap, and from 4 cm×2 cm×2 cm to 5 cm×4 cm×4 cm in tibial bone flap. Tibial defects of the donor region were repaired by autologous iliac bone grafting, and the wounds were sutured directly in 7 cases and repaired by autologous skin grafting in 5 cases. Results: All composite tissue flaps survived and both the recipient and the donor wounds healed primarily. All patients were followed up 6-12 months, with an average of 10.8 months. The appearance, color, texture of the composite tissue flaps and ankle function were satisfactory. X-ray films showed that the bone flap at the tibia defect and the ilium graft at the donor site both healed well at 6 months after operation. Conclusion: The composite tissue flaps pedicled with perforating branch of posterior tibial artery has abundant blood, and it is a good donor region for repairing the distal leg defects combined with circumscribed bone defect.

α-hemihydrate calcium sulfate/octacalcium phosphate combined with sodium hyaluronate promotes bone marrow-derived mesenchymal stem cell osteogenesis in vitro and in vivo.

PURPOSE: The aims of this research were to combine α-hemihydrate calcium sulfate/octacalcium phosphate (α-CSH/OCP) with sodium hyaluronate (SH) or SH sulfate (SHS) to determine whether these composites can be used as a new type of bone repair material. This study may provide a theoretical basis and new ideas for the construction of active bone repair materials and their clinical application. METHODS: In this study, we combined α-CSH/OCP with SH or SHS. Scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and the wettability test were performed, and porosity, setting time, in vitro degradation, and the mechanical properties of these composite materials were analyzed to evaluate the ultrastructural and physicochemical properties. We evaluated the histocompatibility of these composites by MTT assay, hemolysis, acute toxicity, and pyrogenic and intracutaneous stimulation tests. In addition, the osteogenic differentiation ability of these materials was detected in vitro using Western blot analysis and in vivo using an animal model of bone defect. RESULTS: The α-CSH/OCP/SH composite had a compressive strength of 13.72 MPa, a porous rate of 27.45%, and the 28-day degradation rate of 64%. The MTT assay results showed that the relative proliferation rates of the α-CSH/OCP/SH group were greater than 90%. The results of the α-CSH/OCP/SH composite in the hemolysis, acute toxicity, pyrogenic, and intracutaneous stimulation tests were within the normal range. Western blot analysis indicated that the expression of bone extracellular matrix (ECM) proteins was notably upregulated and always higher in the α-CSH/OCP/SH group than in the other groups. XRD of the rabbit radius-defect model indicated that bone healing in the area implanted with α-CSH/OCP/SH was excellent approximately 9 weeks after repair. CONCLUSION: α-CSH/OCP/SH has very good biocompatibility and exhibits clear advantages in the induction of bone regeneration and self-repair, and this compound shows promise in the field of bone tissue engineering.