Antiferroelectricity-Induced Negative Thermal Expansion in Double Perovskite Pb2 CoMoO6.

Materials with negative thermal expansion (NTE) attract significant research attention owing to their unique physical properties and promising applications. Although ferroelectric phase transitions leading to NTE are widely investigated, information on antiferroelectricity-induced NTE remains limited. In this study, single-crystal and polycrystalline Pb2 CoMoO6 samples are prepared at high pressure and temperature conditions. The compound crystallizes into an antiferroelectric Pnma orthorhombic double perovskite structure at room temperature owing to the opposite displacements dominated by Pb2+ ions. With increasing temperature to 400 K, a structural phase transition to cubic Fm-3m paraelectric phase occurs, accompanied by a sharp volume contraction of 0.41%. This is the first report of an antiferroelectric-to-paraelectric transition-induced NTE in Pb2 CoMoO6 . Moreover, the compound also exhibits remarkable NTE with an average volumetric coefficient of thermal expansion αV = -1.33 × 10-5 K-1 in a wide temperature range of 30-420 K. The as-prepared Pb2 CoMoO6 thus serves as a prototype material system for studying antiferroelectricity-induced NTE.

High-Pressure Synthesis of Semiconducting PbCu3Mn4O12 with Near-Room-Temperature Ferrimagnetic Order.

A transition-metal oxide of PbCu3Mn4O12 was prepared at 1523 K and 10 GPa. An A-site-ordered quadruple perovskite structure with the space group Im3̅ is assigned for this compound. Based on bond-valence-sum calculations and X-ray absorption spectroscopy, the charge combination is determined to be PbCu32+Mn44+O12. Due to Cu2+(↑)-Mn4+(↓) antiferromagnetic coupling, a near-room-temperature ferrimagnetic phase transition is observed at approximately 287 K. PbCu3Mn4O12 exhibits a semiconducting electric transport property with the energy band gap Eg ≈ 0.2 eV. In addition, considerable low-field magnetoresistance effects are observed at lower temperatures. This study provides an intrinsic near-room-temperature ferrimagnetic semiconductor that exhibits potential applications in next-generation spintronic devices.

High-Pressure Synthesis of Quadruple Perovskite Oxide CaCu3Cr2Re2O12 with a High Ferrimagnetic Curie Temperature.

An AA'3B2B'2O12-type quadruple perovskite oxide of CaCu3Cr2Re2O12 was synthesized at 18 GPa and 1373 K. Both an A- and B-site ordered quadruple perovskite crystal structure was observed, with the space group Pn-3. The valence states are verified to be CaCu32+Cr23+Re25+O12 by bond valence sum calculations and synchrotron X-ray absorption spectroscopy. The spin interaction among Cu2+, Cr3+, and Re5+ generates a ferrimagnetic transition with the Curie temperature (TC) at about 360 K. Moreover, electric transport properties and specific heat data suggest the presence of a half-metallic feature for this compound. The present study provides a promising quadruple perovskite oxide with above-room-temperature ferrimagnetism and possible half-metallic properties, which shows potential in the usage of spintronic devices.

Insights into Reversible Sodium Intercalation in a Novel Sodium-Deficient NASICON-Type Structure:Na3.40 □0.60 Co0.5 Fe0.5 V(PO4 )3.

The rational design of novel high-performance cathode materials for sodium-ion batteries is a challenge for the development of the renewable energy sector. Here, a new sodium-deficient NASICON phosphate, namely Na3.40 □0.60 Co0.5 Fe0.5 V(PO4 )3 , demonstrating the excellent electrochemical performance is reported. The presence of Co allows a third Na+ to participate in the reaction thus exhibiting a high reversible capacity of ≈155 mAh g-1 in the voltage range of 2.0-4.0 V versus Na+ /Na with a reversible single-phase mechanism and a small volume shrinkage of ≈5.97% at 4.0 V. 23 Na solid-state nuclear magnetic resonance (NMR) combined with ex situ X-ray diffraction (XRD) refinements provide evidence for a preferential Na+ insertion within the Na2 site. Furthermore, the enhanced sodium kinetics ascribed to Co-substitution is also confirmed in combination with electrochemical impedance spectroscopy (EIS), galvanostatic intermittent titration technique (GITT), and theoretical calculation.

High-Pressure-Stabilized Post-Spinel Phase of CdFe2O4 with Distinct Magnetism from Its Ambient-Pressure Spinel Phase.

α-CdFe2O4 stabilizes its normal spinel structure due to the covalent Cd-O bond, in which all the connections between adjacent FeO6 octahedral are edge-shared, forming a typical geometrically frustrated Fe3+ magnetic lattice. As the high-pressure methods were utilized, the post-spinel phase ß-CdFe2O4 with a CaFe2O4-type structure was synthesized at 8 GPa and 1373 K. The new polymorph has an orthorhombic structure with the space group Pnma and an 11.5% higher density than that of its normal spinel polymorph (α-CdFe2O4) synthesized at ambient conditions. The edge-shared FeO6 octahedra form zigzag S = 5/2 spin ladders along the b-axis dominating its low-dimensional magnetic properties at high temperatures and a long-range antiferromagnetic ordering with a high Néel temperature of TN1 = 350 K. Further, the rearrangement of magnetic ordering was found to occur around TN2 = 265 K, below which the competition of two phases or several couplings induce complex antiferromagnetic behaviors.

CaCu3Mn2Te2O12: An Intrinsic Ferrimagnetic Insulator Prepared Under High Pressure.

CaCu3Mn2Te2O12 was synthesized using high-temperature and high-pressure conditions. The compound possesses an A- and B site ordered quadruple perovskite structure in Pn3̅ symmetry with the charge combination of CaCu32+Mn22+Te26+O12. A ferrimagnetic phase transition originating from the antiferromagnetic interaction between A' site Cu2+ and B site Mn2+ ions is found to occur at TC ≈ 100 K. CaCu3Mn2Te2O12 also shows insulating electric conductivity. Optical measurement demonstrates the energy bandgap to be about 1.9 eV, in agreement with the high B site degree of chemical order between Mn2+ and Te6+. The first-principles theoretical calculations confirm the Cu2+(↓)-Mn2+(↑) ferrimagnetic coupling as well as the insulating nature with an up-spin direct bandgap. The current CaCu3Mn2Te2O12 provides an intriguing example of an intrinsic ferrimagnetic insulator with promising applications in advanced spintronic devices.

Highly Oxidative-Resistant Cyano-Functionalized Lithium Borate Salt for Enhanced Cycling Performance of Practical Lithium-Ion Batteries.

Lithium difluoro(oxalato) borate (LiDFOB) has been widely investigated in lithium-ion batteries (LIBs) owing to its advantageous thermal stability and excellent aluminum passivation property. However, LiDFOB tends to suffer from severe decomposition and generate a lot of gas species (e.g., CO2 ). Herein, a novel cyano-functionalized lithium borate salt, namely lithium difluoro(1,2-dihydroxyethane-1,1,2,2-tetracarbonitrile) borate (LiDFTCB), is innovatively synthesized as a highly oxidative-resistant salt to alleviate above dilemma. It is revealed that the LiDFTCB-based electrolyte enables LiCoO2 /graphite cells with superior capacity retention at both room and elevated temperatures (e.g., 80 % after 600 cycles) with barely any CO2 gas evolution. Systematic studies reveal that LiDFTCB tends to form thin and robust interfacial layers at both electrodes. This work emphasizes the crucial role of cyano-functionalized anions in improving cycle lifespan and safety of practical LIBs.

5f Covalency Synergistically Boosting Oxygen Evolution of UCoO4 Catalyst.

Electronic structure modulation among multiple metal sites is key to the design of efficient catalysts. Most studies have focused on regulating 3d transition-metal active ions through other d-block metals, while few have utilized f-block metals. Herein, we report a new class of catalyst, namely, UCoO4 with alternative CoO6 and 5f-related UO6 octahedra, as a unique example of a 5f-covalent compound that exhibits enhanced electrocatalytic oxygen evolution reaction (OER) activity because of the presence of the U 5f-O 2p-Co 3d network. UCoO4 exhibits a low overpotential of 250 mV at 10 mA cm-2, surpassing other unitary cobalt-based catalysts ever reported. X-ray absorption spectroscopy revealed that the Co2+ ion in pristine UCoO4 was converted to high-valence Co3+/4+, while U6+ remained unchanged during the OER, indicating that only Co was the active site. Density functional theory calculations demonstrated that the OER activity of Co3+/4+ was synergistically enhanced by the covalent bonding of U6+-5f in the U 5f-O 2p-Co 3d network. This study opens new avenues for the realization of electronic structure manipulation via unique 5f involvement.

Mo-Incorporated Magnetite Fe3 O4 Featuring Cationic Vacancies Enabling Fast Lithium Intercalation for Batteries.

Transition metal oxides (TMOs) as high-capacity electrodes have several drawbacks owing to their inherent poor electronic conductivity and structural instability during the multi-electron conversion reaction process. In this study, the authors use an intrinsic high-valent cation substitution approach to stabilize cation-deficient magnetite (Fe3 O4 ) and overcome the abovementioned issues. Herein, 5 at% of Mo4+ -ions are incorporated into the spinel structure to substitute octahedral Fe3+ -ions, featuring ≈1.7 at% cationic vacancies in the octahedral sites. This defective Fe2.93 ▫0.017 Mo0.053 O4 electrode shows significant improvements in the mitigation of capacity fade and the promotion of rate performance as compared to the pristine Fe3 O4 . Furthermore, physical-electrochemical analyses and theoretical calculations are performed to investigate the underlying mechanisms. In Fe2.93 ▫0.017 Mo0.053 O4 , the cationic vacancies provide active sites for storing Li+ and vacancy-mediated Li+ migration paths with lower energy barriers. The enlarged lattice and improved electronic conductivity induced by larger doped-Mo4+ yield this defective oxide capable of fast lithium intercalation. This is confirmed by a combined characterization including electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), galvanostatic intermittent titration technique (GITT) and density functional theory (DFT) calculation. This study provides a valuable strategy of vacancy-mediated reaction to intrinsically modulate the defective structure in TMOs for high-performance lithium-ion batteries.

Comparative Study on the Magnetic and Transport Properties of B-Site Ordered and Disordered CaCu3Fe2Os2O12.

The B-site Fe/Os ordered and disordered quadruple perovskite oxides CaCu3Fe2Os2O12 were synthesized under different high-pressure and high-temperature conditions. The B-site ordered CaCu3Fe2Os2O12 is a system with a very high ferrimagnetic ordering temperature of 580 K having the Cu2+(↑)Fe3+(↑)Os5+(↓) charge and spin arrangement. In comparison, the highly disordered CaCu3Fe2Os2O12 has a reduced magnetic transition temperature of about 350 K. The Cu2+Fe3+Os5+ charge combination remains the same without any sign of changes in the valence state of the constituent ions. Although the average net moments of each sublattice are reduced, the average ferrimagnetic spin arrangement is unaltered. The robustness of the basic magnetic properties of CaCu3Fe2Os2O12 against site disorder may be taken as an indication of the tendency to maintain the short-range order of the atomic constituents.

Tuning the structural stability and spin-glass behavior in α-MnO2 nanotubes by Sn ion doping.

A series of α-Mn1-xSnxO2 was synthesized by a simple hydrothermal method to shed light on the effect of substitution. Powder X-ray diffraction and scanning electron microscopy indicated that the particle size, crystal structure and morphology of the samples did not change with an increase of the Sn content. Sn, Mn, O and K elements were all uniformly distributed in the particles, which was observed using energy-dispersive X-ray spectroscopy. However, thermogravimetric analysis showed that the structural stability increased, and an increase of the Mn oxidation state from 3.8+ to nearly 4.0+ was observed by X-ray absorption spectroscopy. Besides, 119Sn Mössbauer spectroscopy revealed that the Sn ions are all 4+ and incorporate into the lattice by replacing the Mn ions. The DC and AC magnetic susceptibility measurements down to 2 K exhibited a spin-glass phenomenon, and the freezing temperature, Tf, decreased from 44 K to 30.5 K with increasing Sn content. This indicates that increased disorder by nonmagnetic substitution results in the enhancement of the frustration in the lattice. Meanwhile, with doping of Sn4+ ions, the Curie-Weiss temperature increased, indicating enhanced antiferromagnetic interaction. Although the mixed valence of Mn3+ and Mn4+ almost disappeared, the reduction of charge disorder did not lead to the magnetic ordering in the sample. Since the Sn4+ ions are diamagnetic and have the same magnetic effect as cation vacancies in the lattice, so it is reasonable to believe that the spin-glass transition in α-MnO2 results from the cation vacancies rather than the mixture of Mn3+ and Mn4+.

High-Performance Perovskite Composite Electrocatalysts Enabled by Controllable Interface Engineering.

Single-phase perovskite oxides that contain nonprecious metals have long been pursued as candidates for catalyzing the oxygen evolution reaction, but their catalytic activity cannot meet the requirements for practical electrochemical energy conversion technologies. Here a cation deficiency-promoted phase separation strategy to design perovskite-based composites with significantly enhanced water oxidation kinetics compared to single-phase counterparts is reported. These composites, self-assembled from perovskite precursors, comprise strongly interacting perovskite and related phases, whose structure, composition, and concentration can be accurately controlled by tailoring the stoichiometry of the precursors. The composite catalyst with optimized phase composition and concentration outperforms known perovskite oxide systems and state-of-the-art catalysts by 1-3 orders of magnitude. It is further demonstrated that the strong interfacial interaction of the composite catalysts plays a key role in promoting oxygen ionic transport to boost the lattice-oxygen participated water oxidation. These results suggest a simple and viable approach to developing high-performance, perovskite-based composite catalysts for electrochemical energy conversion.

High-Pressure Synthesis and Magnetism of the 4H-BaMnO3 Single Crystal and Its 6H-Type Polymorph.

A 4H-type BaMnO3 single crystal was prepared by combining the floating zone method with high-pressure treatment at 5 GPa and 1023 K. The crystal crystallizes to a hexagonal structure with space group P63/mmc and lattice parameters a = 5.63723(5) Å and c = 9.22355(8) Å. In this structure, face-sharing MnO6 octahedral dimers connect with each other by corner O atoms along the c-axis direction, forming an -A-B-A-C-type 4H arrangement. A long-range antiferromagnetic (AFM) phase transition is found to occur at TN ≈ 263 K. When the synthesis pressure increases to 20 GPa, a new polymorphic phase is obtained. This higher-pressure phase still possesses the hexagonal P63/mmc symmetry, but the lattice parameters change to be a = 5.61349(2) Å and c = 13.66690(9) Å with a unit cell volume reduction of 2.05%. In this new phase, the c-axis MnO6 dimers are separated by MnO6 octahedral layers in the ab plane, forming an -A-B-C-A-C-B-type 6H structure. The 6H phase exhibits two long-range AFM orderings at TN1 ≈ 220 K and TN2 ≈ 25 K, respectively. The different magnetic properties are discussed on the basis of the detailed structural constitutions of 4H- and 6H-BaMnO3.

Os Doping Suppressed Cu-Fe Charge Transfer and Induced Structural and Magnetic Phase Transitions in LaCu3Fe4-xOsxO12 (x = 1 and 2).

B-site Os-doped quadruple perovskite oxides LaCu3Fe4-xOsxO12 (x = 1 and 2) were prepared under high-pressure and high-temperature conditions. Although parent compound LaCu3Fe4O12 experiences Cu-Fe intermetallic charge transfer that changes the Cu3+/Fe3+ charge combination to Cu2+/Fe3.75+ at 393 K, in the Os-doped samples, the Cu and Fe charge states are found to be constant 2+ and 3+, respectively, indicating the complete suppression of charge transfer. Correspondingly, Os6+ and mixed Os4.5+ valence states are determined by X-ray absorption spectroscopy for x = 1 and x = 2 compositions, respectively. The x = 1 sample crystallizes in an Fe/Os disordered structure with the Im3̅ space group. It experiences a spin-glass transition around 480 K. With further Os substitution up to x = 2, the crystal symmetry changes to Pn3̅, where Fe and Os are orderly distributed in a rocksalt-type fashion at the B site. Moreover, this composition shows a long-range Cu2+(↑)Fe3+(↑)Os4.5+(↓) ferrimagnetic ordering near 520 K. This work provides a rare example for 5d substitution-suppressed intermetallic charge transfer as well as induced structural and magnetic phase transitions with high spin ordering temperature.

Mg-Pillared LiCoO2 : Towards Stable Cycling at 4.6†V.

LiCoO2 is used as a cathode material for lithium-ion batteries, however, cationic/anodic-redox-induced unstable phase transitions, oxygen escape, and side reactions with electrolytes always occur when charging LiCoO2 to voltages higher than 4.35 V, resulting in severe capacity fade. Reported here is Mg-pillared LiCoO2 . Dopant Mg ions, serving as pillars in the Li-slab of LiCoO2 , prevent slab sliding in a delithiated state, thereby suppressing unfavorable phase transitions. Moreover, the resulting Li-Mg mixing structure at the surface of Mg-pillared LiCoO2 is beneficial for eliminating the cathode-electrolyte interphase overgrowth and phase transformation in the close-to-surface region. Mg-pillared LiCoO2 exhibits a high capacity of 204 mAh g-1 at 0.2 C and an enhanced capacity retention of 84 % at 1.0 C over 100 cycles within the voltage window of 3.0-4.6 V. In contrast, pristine LiCoO2 has a capacity retention of 14 % within the same voltage window.

Self-Assembled Ruddlesden-Popper/Perovskite Hybrid with Lattice-Oxygen Activation as a Superior Oxygen Evolution Electrocatalyst.

The oxygen evolution reaction (OER) is pivotal in multiple gas-involved energy conversion technologies, such as water splitting, rechargeable metal-air batteries, and CO2 /N2 electrolysis. Emerging anion-redox chemistry provides exciting opportunities for boosting catalytic activity, and thus mastering lattice-oxygen activation of metal oxides and identifying the origins are crucial for the development of advanced catalysts. Here, a strategy to activate surface lattice-oxygen sites for OER catalysis via constructing a Ruddlesden-Popper/perovskite hybrid, which is prepared by a facile one-pot self-assembly method, is developed. As a proof-of-concept, the unique hybrid catalyst (RP/P-LSCF) consists of a dominated Ruddlesden-Popper phase LaSr3 Co1.5 Fe1.5 O10-δ (RP-LSCF) and second perovskite phase La0.25 Sr0.75 Co0.5 Fe0.5 O3-δ (P-LSCF), displaying exceptional OER activity. The RP/P-LSCF achieves 10 mA cm-2 at a low overpotential of only 324 mV in 0.1 m KOH, surpassing the benchmark RuO2 and various state-of-the-art metal oxides ever reported for OER, while showing significantly higher activity and stability than single RP-LSCF oxide. The high catalytic performance for RP/P-LSCF is attributed to the strong metal-oxygen covalency and high oxygen-ion diffusion rate resulting from the phase mixture, which likely triggers the surface lattice-oxygen activation to participate in OER. The success of Ruddlesden-Popper/perovskite hybrid construction creates a new direction to design advanced catalysts for various energy applications.

Deterministic optical control of room temperature multiferroicity in BiFeO3 thin films.

Controlling ferroic orders (ferroelectricity, ferromagnetism and ferroelasticity) by optical methods is a significant challenge due to the large mismatch in energy scales between the order parameter coupling strengths and the incident photons. Here, we demonstrate an approach to manipulate multiple ferroic orders in an epitaxial mixed-phase BiFeO3 thin film at ambient temperature via laser illumination. Phase-field simulations indicate that a light-driven flexoelectric effect allows the targeted formation of ordered domains. We also achieved precise sequential laser writing and erasure of different domain patterns, which demonstrates a deterministic optical control of multiferroicity at room temperature. As ferroic orders directly influence susceptibility and conductivity in complex materials, our results not only shed light on the optical control of multiple functionalities, but also suggest possible developments for optoelectronics and related applications.

High-Pressure Synthesis of a B-site Co2+/Mn4+ Disordered Quadruple Perovskite LaMn3Co2Mn2O12.

A new oxide, LaMn3Co2Mn2O12, was synthesized under high-pressure (7 GPa) and high-temperature (1423 K) conditions. The compound crystallizes in an AA'3B4O12-type quadruple perovskite structure with space group Im3̅. The Rietveld structural analysis combined with soft X-ray absorption spectroscopy reveals the charge combination to be LaMn3+3Co2+2Mn4+2O12, where the La3+ and Mn3+ are 1:3 ordered respectively at the A and A' sites, whereas the Co2+ and Mn4+ are disorderly distributed at the B site. This is in sharp contrast to R2Co2+Mn4+O6 (R = La and rare earth) double perovskites, in which the Co2+ and Mn4+ charge states are always orderly distributed with a rocksalt-type fashion, giving rise to a long-range magnetic ordering. As a result, LaMn3Co2Mn2O12 displays spin glassy magnetic properties due to the random Co2+ and Mn4+ distribution, as demonstrated by dc and ac magnetic susceptibility as well as specific heat measurements. Possible factors that affect the B-site degree of order in perovskite structures are discussed.

High-Pressure Synthesis of Two Polymorphic HgMnO3 Phases and Distinct Magnetism from 2D to 3D.

An ilmenite-like monoclinic phase of HgMnO3 with space group P21/c was prepared using high-pressure and high-temperature methods at 18 GPa and 1473 K. The MnO6 octahedra form a two-dimensional (2D) network in the bc plane, leading to a long-range antiferromagnetic ordering with a low Néel temperature of TN ∼ 32 K. As the synthesis pressure increases to 20 GPa, a new perovskite-like rhombohedral phase with space group R3̅c was found to occur. The rhombohedral phase exhibits a three-dimensional (3D) network for the MnO6 octahedra, giving rise to an antiferromagnetic ordering at TN ∼ 60 K. X-ray absorption spectroscopy confirms the invariable Mn4+ charge state in these two polymorphic phases, in agreement with the Curie-Weiss and bond valence sum analysis. HgMnO3 provides an interesting example to study the magnetic properties from 2D to 3D by varying synthesis pressure.

The Synthesis of a Quasi-One-Dimensional Iron-Based Telluride with Antiferromagnetic Chains and a Spin Glass State.

The report on the superconductivity of the two-legged spin ladders BaFe2S3 and BaFe2Se3 has established 123-type iron chalcogenides as a novel subgroup in the iron-based superconductor family and has stimulated the continuous exploration of other iron-based materials with new structures and potentially novel properties. In this paper, we report the systematic study of a new quasi-one-dimensional (1D) iron-based compound, Ba9Fe3Te15, including its synthesis and magnetic properties. The high-pressure synthesized Ba9Fe3Te15 crystallized in a hexagonal structure that mainly consisted of face-sharing FeTe6 octahedral chains running along the c axis, with a lattice constant of a = 10.23668 Å; this led to weak interchain coupling and an enhanced one-dimensionality. The systematic static and dynamic magnetic properties were comprehensively studied experimentally. The dc magnetic susceptibility showed typical 1D antiferromagnetic characteristics, with a Tmax at 190 K followed by a spin glass (SG) state with freezing at Tf ≈ 6.0 K, which were also unambiguously proved by ac susceptibility measurements. Additionally, X-ray magnetic circular dichroism (XMCD) experiments revealed an unexpected orbital moment for Fe2+, i.e., 0.84 µB per Fe in Ba9Fe3Te15. The transport property is electrically insulating, with a thermal activation gap of 0.32 eV. These features mark Ba9Fe3Te15 as an alternative type of iron-based compound, providing a diverse candidate for high-pressure studies in order to pursue some emerging physics.