Challenges and opportunities for circRNA identification and delivery.

Circular RNAs (circRNAs) are evolutionarily conserved noncoding RNAs with tissue-specific expression patterns, and exert unique cellular functions that have the potential to become biomarkers in therapeutic applications. Therefore, accurate and sensitive detection of circRNA with facile platforms is essential for better understanding of circRNA biological processes and circRNA-related disease diagnosis and prognosis; and precise regulation of circRNA through efficient delivery of circRNA or siRNA is critical for therapeutic purposes. Here, we reviewed the current development of circRNA identification methodologies, including overviewing the purification steps, summarizing the sequencing methods of circRNA, as well as comparing the advantages and disadvantages of traditional and new detection methods. Then, we discussed the delivery and manipulation strategies for circRNAs in both research and clinic treatment. Finally, the challenges and opportunities of analyzing circRNAs were addressed.

A DNAzyme-enhanced nonlinear hybridization chain reaction for sensitive detection of microRNA.

As a typical biomarker, the expression of microRNA is closely related to the occurrence of cancer. However, in recent years, the detection methods have had some limitations in the research and application of microRNAs. In this paper, an autocatalytic platform was constructed through the combination of a nonlinear hybridization chain reaction and DNAzyme to achieve efficient detection of microRNA-21. Fluorescently labeled fuel probes can form branched nanostructures and new DNAzyme under the action of the target, and the newly formed DNAzyme can trigger a new round of reactions, resulting in enhanced fluorescence signals. This platform is a simple, efficient, fast, low-cost, and selective method for the detection of microRNA-21, which can detect microRNA-21 at concentrations as low as 0.004 nM and can distinguish sequence differences by single-base differences. In tissue samples from patients with liver cancer, the platform shows the same detection accuracy as real-time PCR but with better reproducibility. In addition, through the flexible design of the trigger chain, our method could be adapted to detect other nucleic acid biomarkers.

Advancements and prospects of lipid-based nanoparticles: dual frontiers in cancer treatment and vaccine development.

Cancer is a complex heterogeneous disease that poses a significant public health challenge. In recent years, lipid-based nanoparticles (LBNPs) have expanded drug delivery and vaccine development options owing to their adaptable, non-toxic, tuneable physicochemical properties, versatile surface functionalisation, and biocompatibility. LBNPs are tiny artificial structures composed of lipid-like materials that can be engineered to encapsulate and deliver therapeutic agents with pinpoint accuracy. They have been widely explored in oncology; however, our understanding of their pharmacological mechanisms, effects of their composition, charge, and size on cellular uptake, tumour penetration, and how they can be utilised to develop cancer vaccines is still limited. Hence, we reviewed LBNPs' unique characteristics, biochemical features, and tumour-targeting mechanisms. Furthermore, we examined their ability to enhance cancer therapies and their potential contribution in developing anticancer vaccines. We critically analysed their advantages and challenges impeding swift advancements in oncology and highlighted promising avenues for future research.

LBNPs are tiny artificial particles made of lipids using different formulation methods. They are powerful and versatile delivery platforms with great potential as anticancer therapies. LBNPs have been tested in clinical applications and can safely deliver anticancer agents, including vaccine payloads designed to target various cancer types.LBNPs' size, surface charge, and targeting ligands can be modified during formulation, and they can be administered to specific tissues via various routes. LBNPs can target tumours and release their payload via active, passive, or stimuli-responsive mechanisms.Active targeting requires surface modification in order to target and deliver their payload, while passive targeting do not. Stimuli-responsive release mechanisms move to the tumour microenvironment and release their payload upon an internal or external stimulus.There are several challenges faced by LBNPs in delivering cancer drugs and vaccines, but advanced research methods have opened new doors vital for expanding their applications in clinical oncology.LBNPs offer the advantage of enhanced drug stability and bioavailability, prolonged circulation time of therapeutic agents in the bloodstream, and improved efficacy in targeting cancerous tissues.

Deciphering the Mechanism of Base-Triggered Conversion of Ammonia to Molecular Nitrogen and Methylamine to Cyanide.

We report an in-depth investigation into the ammonia oxidation mechanism by the catalyst [RuIII(tpy)(dmabpy)NH3]3+ ([Ru(NH3)]3+). Stoichiometric reactions of [Ru(NH3)]3+ were carried out with exogenous noncoordinating bases to trigger a proposed redox disproportionation reaction, which was followed using variable-temperature NMR spectroscopy. An intermediate species was identified as a dinitrogen-bridged complex using 15N NMR and Raman spectroscopy on isotopically labeled complexes. This intermediate is proposed to derive from coupling of nitridyl species formed upon sequential redox disproportion reactions. Acetonitrile displaces the dinitrogen bridge to yield free N2. DFT calculations support this lower-energy pathway versus that previously reported for ammonia oxidation by the parent [RuIII(tpy)(bpy)NH3]3+ complex. These experimental and computational results are consistent with the interpretation of redox disproportionation involving sequential hydrogen atom transfer reactions by an amide/aminyl intermediate, [Ru(NH2)-]+ ⇔ [Ru(NH2)•]+, formed upon deprotonation of the parent complex. Control experiments employing a large excess of ammonia as a base indicate this new proposed lower-energy pathway contributes to the oxidation of ammonia to dinitrogen in conditions relevant to electrocatalysis. In addition, analogous methylamine complexes, [Ru(NH2CH3)]2+/3+, were prepared to further test the proposed mechanism. Treating [Ru(NH2CH3)]3+ with a base cleanly yields two products [Ru(NH2CH3)]2+ and [Ru(CN)]+ in an ∼3:1 ratio, fully consistent with the proposed cascade of hydrogen atom transfer reactions by an intermediate.

Digital droplet immunoassay based on a microfluidic chip with magnetic beads for the detection of prostate-specific antigen.

Sensitive biomarker detection techniques are beneficial for both disease diagnosis and postoperative examinations. In this study, we report an integrated microfluidic chip designed for the immunodetection of prostate-specific antigens (PSAs). The microfluidic chip is based on the three-dimensional structure of quartz capillaries. The outlet channel extends to 1.8 cm, effectively facilitating the generation of uniform droplets ranging in size from 3 to 50 µm. Furthermore, we successfully immobilized the captured antibodies onto the surface of magnetic beads using an activator, and we constructed an immunosandwich complex by employing biotinylated antibodies. A key feature of this microfluidic chip is its integration of microfluidic droplet technology advantages, such as high-throughput parallelism, enzymatic signal amplification, and small droplet size. This integration results in an exceptionally sensitive PSA detection capability, with the detection limit reduced to 7.00 ± 0.62 pg/mL.

Recent Advances and Challenges of Electrocatalytic N2 Reduction to Ammonia.

Global ammonia production reached 175 million metric tons in 2016, 90% of which is produced from high purity N2 and H2 gases at high temperatures and pressures via the Haber-Bosch process. Reliance on natural gas for H2 production results in large energy consumption and CO2 emissions. Concerns of human-induced climate change are spurring an international scientific effort to explore new approaches to ammonia production and reduce its carbon footprint. Electrocatalytic N2 reduction to ammonia is an attractive alternative that can potentially enable ammonia synthesis under milder conditions in small-scale, distributed, and on-site electrolysis cells powered by renewable electricity generated from solar or wind sources. This review provides a comprehensive account of theoretical and experimental studies on electrochemical nitrogen fixation with a focus on the low selectivity for reduction of N2 to ammonia versus protons to H2. A detailed introduction to ammonia detection methods and the execution of control experiments is given as they are crucial to the accurate reporting of experimental findings. The main part of this review focuses on theoretical and experimental progress that has been achieved under a range of conditions. Finally, comments on current challenges and potential opportunities in this field are provided.

Applications of capillary electrophoresis in the fields of environmental, pharmaceutical, clinical, and food analysis (2019-2021).

So far, the potential of capillary electrophoresis in the application fields has been increasingly excavated due to the advantages of simple operation, short analysis time, high-resolution, less sample consumption, and low cost. This review examines the implementations and advancements of capillary electrophoresis in different application fields (environmental, pharmaceutical, clinical, and food analysis) covering the literature from 2019 to 2021. In addition, ultrasmall sample injection volume (nanoliter range) and short optical path lead to relatively low concentration sensitivity of the most frequently used ultraviolet-absorption spectrophotometric detection, so the pretreatment technology being developed has been gradually utilized to overcome this problem. Despite the review being focused on the development of capillary electrophoresis in the fields of environmental, pharmaceutical, clinical, and food analysis, the new sample pretreatment techniques of microextraction and enrichment fit excellently to capillary electrophoresis in recent three years are also described briefly.

The Role of Cryoprotective Agents in Liposome Stabilization and Preservation.

To improve liposomes' usage as drug delivery vehicles, cryoprotectants can be utilized to prevent constituent leakage and liposome instability. Cryoprotective agents (CPAs) or cryoprotectants can protect liposomes from the mechanical stress of ice by vitrifying at a specific temperature, which forms a glassy matrix. The majority of studies on cryoprotectants demonstrate that as the concentration of the cryoprotectant is increased, the liposomal stability improves, resulting in decreased aggregation. The effectiveness of CPAs in maintaining liposome stability in the aqueous state essentially depends on a complex interaction between protectants and bilayer composition. Furthermore, different types of CPAs have distinct effective mechanisms of action; therefore, the combination of several cryoprotectants may be beneficial and novel attributed to the synergistic actions of the CPAs. In this review, we discuss the use of liposomes as drug delivery vehicles, phospholipid-CPA interactions, their thermotropic behavior during freezing, types of CPA and their mechanism for preventing leakage of drugs from liposomes.

Traditional and new applications of the HCR in biosensing and biomedicine.

The hybridization chain reaction is a very popular isothermal nucleic acid amplification technology. A single-stranded DNA initiator triggers an alternate hybridization event between two hairpins forming a double helix polymer. Due to isothermal, enzyme-free and high amplification efficiency characteristics, the HCR is often used as a signal amplification technology for various biosensing and biomedicine fields. However, as an enzyme-free self-assembly reaction, it has some inevitable shortcomings of relatively slow kinetics, low cell internalization efficiency, weak biostability of DNA probes and uncontrollable reaction in these applications. More and more researchers use this reaction system to synthesize new materials. New materials can avoid these problems skillfully by virtue of their inherent biological characteristics, molecular recognition ability, sequence programmability and biocompatibility. Here, we summarized the traditional application of the HCR in biosensing and biomedicine in recent years, and also introduced its new application in the synthesis of new materials for biosensing and biomedicine. Finally, we summarized the development and challenges of the HCR in biosensing and biomedicine in recent years. We hope to give readers some enlightenment and help.

Rapid detection of carbamate pesticide residues using microchip electrophoresis combining amperometric detection.

The long-term consumption of food with pesticide residues has harmful effects on human health and the demand for pesticide detection technology tends to be miniaturized and instant. To this end, we demonstrated the first application of indirectly detecting two carbamate pesticides, metolcarb and carbaryl, by gold nanoparticle-modified indium tin oxide electrode in dual-channel microchip electrophoresis and amperometric detection (ME-AD) system. m-Cresol and α-naphthol were obtained after pesticide hydrolysis in alkaline solution, and then separated and detected by ME-AD. Parameters including the detection potential and running buffer concentration and pH were optimized to improve the detection sensitivity and separation efficiency. Under the optimal conditions, the two analytes were completely separated within 80 s. m-Cresol and α-naphthol presented a wide linear range from 1 to 100 µM, with limits of detection of 0.16 µM and 0.34 µM, respectively (S/N = 3). Moreover, the reliability of this system was demonstrated by analyzing metolcarb and carbaryl in spiked vegetable samples.

Simple and rapid nicotine analysis using a disposable silica nanochannel-assisted electrochemiluminescence sensor.

Nicotine analysis is essential to medicine, toxicology and the tobacco industry. However, no simple, portable and disposable method was developed to meet their demands. Here, we report a simple, rapid and disposable silica nanochannel (SAN)-based electrochemiluminescence (ECL) sensor for nicotine analysis by simply assembling a SAN electrode with a paper cover. The sensing principle of the disposable sensor is based on the size exclusion effect and charge selectivity, which obviously prolong the sensor service time. We find that the sensor exhibits good specificity to nicotine, and most of the complex matrices are unlikely to impact the detection. The performance of the disposable sensor in cigarettes, e-cigarettes, nicotine gums, and lozenges is fully validated, showing satisfactory linearity, sensitivity (a limit of detection of 27.82 nM), and accuracy (a recovery between 96.00% and 106.51%). The disposable sensor can be potentially applied for on-site nicotine analysis.

Combination of microfluidic chip and electrostatic atomization for the preparation of drug-loaded core-shell nanoparticles.

To overcome the shortcoming of drug-loaded nanoparticles, such as high initial burst release and wide size distribution, a novel manufacturing technique for core-shell structure nanoparticle was developed by combining microfluidic chip and electrohydrodynamic atomization. In this study, the mixture solution of the surfactant 1, 2- dipalmitoyl-sn-glycero-3-phosphoglycerol and the polymeric coating material polylactic-glycolic-acid was introduced into the outer microchannel of the microfluidic chip as the particle's shell. And the encapsulated drug paclitaxel was pumped into the inner microchannel as the core. Then, the particles with a nanoscale-size core-shell structure were generated by applying an electric field on the laminar flow which was formed in the microfluidic chip. Operation parameters, including working voltage, carrier material and surfactant concentration as well as liquid flow rates were optimized for nanoparticles generation. The properties of drug-loaded nanoparticles in terms of their particle size, zeta potential and encapsulation efficiency were investigated. Under the optimal experimental conditions, the particle size was approximately 145 nm and encapsulation efficiency reached 92%. Moreover, the drug release of these nanoparticles could be prolonged over a significant period for more than ten days. It can be expected that this innovative approach could provide a useful platform for drug-loaded core-shell nanoparticles developing.

Novel approaches for biomolecule immobilization in microscale systems.

Biomolecule-immobilized microscale systems present promising potential in the analysis field based on their reduced reagent consumption, improved analysis speed, automated processing, and high throughput. To increase the biomolecule binding capacity, improve the biomolecule activity and stability, enhance renewability, and develop easy-to-operate procedures, novel immobilization approaches have attracted tremendous attention recently. In this review, a variety of methods employed in preparing state-of-the-art DNA-, protein-, and polysaccharide-immobilized microscale systems are summarized. We focus on highlighting the merits of applying the click reaction, the nanomaterial-based strategy, encapsulation, layer-by-layer assembly, and the reversible immobilization strategy for improving the biomolecule-immobilized microscale system performance. Moreover, the utilization of innovative biomolecule-immobilized microscale systems for biosensing, affinity chromatography separation, bioreaction, and enantioseparation is also discussed.

Click chemistry at the microscale.

Click chemistry has attracted tremendous attention for the fabrication of novel microscale systems based on its high reaction efficiency, satisfactory versatility and simple processing. Meanwhile, microscale systems also provide desirable analytical platforms for click reaction study. Herein, we review the employment of click reactions for developing state-of-the-art microchip-based and capillary-based systems. The advantages of innovative off-stoichiometry thiol-ene (OSTE)-microchips, bio-functionalized microchips and monolithic microsystems for chemical and biological assays are highlighted. Moreover, the potential of microscale systems applied for click reaction investigation is indicated as well. This article presents an overview of the recent developments in the combination of microscale systems and click chemistry.

A multichannel microchip containing 16 chambers packed with antibody-functionalized beads for immunofluorescence assay.

A multichannel chip containing 16 microchambers was developed for fast and sensitive immunoassays. In each chamber, antibody-functionalized nonmagnetic beads were applied as the solid phase to capture target antigens. Four types of IgGs (human, rabbit, chicken, and mouse) could be detected simultaneously by our combining this microchip with a sandwich immunoassay technique. A three-layer chip structure was investigated for integration of multiple processes, including washing, immune reaction, and detection, in one microchip. Moreover, the proposed chip design could improve batch-to-batch repeatability and avoid interferences between different channels without the preparation of complex microvalves. The total operation time of this system was less than 30 min, with a desirable detection limit of 0.2 pg/mL. The results indicate that the microfluidic platform is promising for the immunoassay of multiple clinical biomarkers. Graphical abstract.

Novel Surface-Enhanced Raman Spectroscopy Techniques for DNA, Protein and Drug Detection.

Surface-enhanced Raman spectroscopy (SERS) is a vibrational spectroscopic technique in which the Raman scattering signal strength of molecules, absorbed by rough metals or the surface of nanoparticles, experiences an exponential growth (10³-106 times and even 1014-1015 times) because of electromagnetic or chemical enhancements. Nowadays, SERS has attracted tremendous attention in the field of analytical chemistry due to its specific advantages, including high selectivity, rich informative spectral properties, nondestructive testing, and the prominent multiplexing capabilities of Raman spectroscopy. In this review, we present the applications of state-of-the-art SERS for the detection of DNA, proteins and drugs. Moreover, we focus on highlighting the merits and mechanisms of achieving enhanced SERS signals for food safety and clinical treatment. The machine learning techniques, combined with SERS detection, are also indicated herein. This review concludes with recommendations for future studies on the development of SERS.

Two-Step Centrifugation Method for Subpicomolar Surface-Enhanced Raman Scattering Detection.

The potentiality of surface-enhanced Raman scattering (SERS) to detect ultralow concentrations of analyte has attracted much attention in detection of trace components in both medicinal and environmental samples. However, detection at trace concentration usually requires sophisticated systems. Here, we present an ultrasensitive and facile SERS approach, a two-step centrifugation method, which achieved a detection limit of 500 fM with phenformin hydrochloride and risperidone as acidic and alkaline analyte, respectively. This method consists of two steps: (1) centrifuging colloidal silver to increase nanoparticles' concentration and to remove small-size nanoparticles, thus increasing the chance of analyte adsorption on large nanoparticles that have strong SERS activity; (2) centrifuging samples after the analytes were mixed with nanoparticles. After the first centrifugation and mixing with aqueous analyte, the colloidal silver is either flocculated (for high-concentration samples) or forms a nanoparticle-analyte complex (for low-concentration samples). Until the second centrifugation, the concentration of analyte and hot-spot formation is significantly increased, and thus a high SERS enhancement factor is obtained. In short, the two-step centrifugation method overcomes drawbacks of the traditional method, which demands not only sophisticated operation but also expensive instruments, to fully exploit the potential of SERS detection.

Dual Colorimetric and Fluorescent Imaging of Latent Fingerprints on Both Porous and Nonporous Surfaces with Near-Infrared Fluorescent Semiconducting Polymer Dots.

Semiconducting polymer dots (Pdots) have recently been proven as a novel type of ultrabright fluorescent probes that can be extensively used in analytical detection. Here, we developed a dual visual sensor based on Pdots for fingerprint imaging. We first designed and synthesized two types of near-infrared (NIR) fluorescent polymers and then embedded ninhydrin into the Pdot matrix. The resulting Pdot assays showed the colorimetric and fluorescent dual-readout abilities to detect latent fingerprints on both porous and nonporous surfaces. The developed fingerprints clearly revealed first-, second-, and third-level details with high contrast, high selectivity, and low background interference. We also grafted the chemical groups on the nanoparticle surface to investigate the mechanisms involved in the fingerprint development processes. We further utilized this assay in note paper and checks for latent fingerprint imaging. We believe that this dual-readout method based on Pdots will create a new avenue for research in fingerprint detection and anticounterfeiting technology.

Quinoxaline-Based Polymer Dots with Ultrabright Red to Near-Infrared Fluorescence for In Vivo Biological Imaging.

This article describes the design and synthesis of quinoxaline-based semiconducting polymer dots (Pdots) that exhibit near-infrared fluorescence, ultrahigh brightness, large Stokes shifts, and excellent cellular targeting capability. We also introduced fluorine atoms and long alkyl chains into polymer backbones and systematically investigated their effect on the fluorescence quantum yields of Pdots. These new series of quinoxaline-based Pdots have a fluorescence quantum yield as high as 47% with a Stokes shift larger than 150 nm. Single-particle analysis reveals that the average per-particle brightness of the Pdots is at least 6 times higher than that of the commercially available quantum dots. We further demonstrated the use of this new class of quinoxaline-based Pdots for effective and specific cellular and subcellular labeling without any noticeable nonspecific binding. Moreover, the cytotoxicity of Pdots were evaluated on HeLa cells and zebrafish embryos to demonstrate their great biocompatibility. By taking advantage of their extreme brightness and minimal cytotoxicity, we performed, for the first time, in vivo microangiography imaging on living zebrafish embryos using Pdots. These quinoxaline-based NIR-fluorescent Pdots are anticipated to find broad use in a variety of in vitro and in vivo biological research.

Dual colorimetric and fluorescent sensor based on semiconducting polymer dots for ratiometric detection of lead ions in living cells.

Recently, semiconducting polymer dots (Pdots) have become a novel type of ultrabright fluorescent probes which hold great promise in biological imaging and analytical detection. Here we developed a visual sensor based on Pdots for Pb(2+) detection. We first embedded near-infrared (NIR) dyes into the matrix of poly[(9,9-dioctylfluorene)-co-2,1,3-benzothiadiazole-co-4,7-di(thiophen-2-yl)-2,1,3-benzothiadiazole] (PFBT-DBT) polymer and then capped the Pdots with polydiacetylenes (PDAs), in which parts of the PDAs were prefunctionalized with 15-crown-5 moieties to form Pdots. The high selectivity of these Pdots for lead ions is attributed to the formation of 2:1 15-crown-5-Pb(2+)-carboxylate sandwich complex on the Pdot surface. After Pb(2+) chelation, the conjugation system of the PDA was perturbed and strained, causing a chromatic change of the PDA from blue to red. At the same time, the encapsulated NIR dyes were liable to leach out that resulted in an emission variation of the Pdots. Accordingly, lead ions can be recognized by either color change or emission variation of the Pdots. We also loaded these nanoprobes into live HeLa cells through endocytosis, and then monitored changes in Pb(2+) levels within cells, demonstrating their utility for use in cellular and bioimaging applications. In addition, we fabricated easy-to-prepare test strips impregnated with Pdot-poly(vinyl alcohol) films to identify Pb(2+) in real samples, which proved their applicability for in situ on-site detection. Our results suggest that this Pdot-based visual sensor shows promising potential for advanced environmental and biological applications.