[Heparin-binding hemagglutinin as a composition antigen of tuberculosis vaccine exerts protective immune effects by inducing IL-17].

To explore the protective immune effect induced by mucosal delivery heparin-binding hemagglutinin (HBHA)-a candidate vaccine antigen of Mycobacterium tuberculosis. Female C57BL/6 mice were between 6 and 8 weeks of age before experimental use. Thirty mice received different immunization strategies and were randomly divided into the control group, the early secreting antigen target-6 (ESAT-6) intranasal immunization group, the HBHA intranasal immunization group, the BCG priming PBS control group, or BCG priming HBHA boost group, 6 mice in each group. In order to analyzed the immune effect, the concentrations of plasma Interleukin-17A (IL-17A) and other cytokines were measured by ELISA. Quantitative real-time PCR analyses were performed to detect the relative quantity (RQ) mRNA of IL-17A in the lung. The lung tissue sections were stained to detect the formation of the tertiary lymphoid structures. The chemokines contributed to formation of the tertiary lymphoid structures were also measured. Flow cytometry was used to detect the frequency of Th1 and Th17 cells in the system. Sixty mice in the BCG priming PBS control group and the BCG priming HBHA boost group were sacrificed at different time points after infection to count the lung bacterial burden. The concentrations of plasma IL-17A and relative quantity of lung IL-17A mRNA were highest in the BCG priming HBHA boost group [(14.76±4.73) pg/mL,RQ (12.27±6.71)], which was significantly higher than the control group [(5.57±2.95) pg/mL,RQ (1.30±0.97)] (t=4.213, P<0.001; t=5.984, P<0.001), and also significantly higher than the BCG priming PBS control group [(6.81±2.18) pg/mL,RQ (1.44±1.16)] (t=3.646 P=0.001; t=6.185 P<0.001). Compared with the BCG priming PBS control group (0.38±0.38)% the frequency of spleen Th17 cells were also significantly increased (t=-0.280, P=0.048) in the BCG-primary HBHA boost group (1.02±0.34)%. In addition, HBHA boosting could promote better formation of the tertiary lymphoid structures in the lung, and decrease the bacterial load on the early stage after BCG challenge. Collectively, mucosal delivery of HBHA can effectively enhance the protective effect after BCG vaccination, and it is a potential candidate vaccine component.

[Accuracy of three intraoral scans for primary impressions of edentulous jaws].

OBJECTIVE: To provide a reference for using intraoral scanners for making clinical diagnostic dentures of edentulous jaws by comparing the accuracy of three intraoral scanners for primary impression and jaw relation record of edentulous jaws. METHODS: This study contained 6 primary impressions of the edentulous patients. Each of the impressions consisted of the maxillary primary impression, the mandibular primary impression and the jaw relation record. For each of them, a dental cast scanner (Dentscan Y500) was used to obtain stereolithography (STL) data as reference scan, and then three intraoral scanners including i500, Trios 3 and CEREC Primescan were used for three times to obtain STL data as experiment groups. In Geomagic Studio 2013 software, trueness was obtained by comparing experiment groups with the reference scan, and the precision was obtained from intragroup comparisons. Registered maxillary data of the intraoral scan with reference scan, the morphological error of jaw relation record was obtained by comparing jaw relation record of the intraoral scan with the reference scan. Registered mandibular data with jaw relation record of intraoral scan and the displacement of the jaw position were evaluated. Independent samples t test and Mann-Whitney U test in the SPSS 20.0 statistical software were used to statistically analyze the trueness, precision and morphological error of jaw relation record of three intraoral scanners. The Bland-Altman diagram was used to evaluate the consistency of the jaw relationship measured by the three intraoral scanners. RESULTS: The trueness of i500, Trios 3 and CEREC Primescan scanners was (182.34±101.21) µm, (145.21±71.73) µm, and (78.34±34.79) µm for maxilla; (106.42±21.63) µm, and 95.08 (63.08) µm, (78.45±42.77) µm for mandible. There was no significant difference in trueness of the three scanners when scanning the maxilla and mandible(P>0.05). The precision of the three scanners was 147.65 (156.30) µm, (147.54±83.33) µm, and 40.30 (32.80) µm for maxilla; (90.96±30.77) µm, (53.73±23.56) µm, and 37.60 (93.93) µm for mandible. The precision of CEREC Primescan scanner was significantly better than that of the other two scanners for maxilla (P<0.05). Trios 3 and CEREC Primescan scanners were significantly better than i500 scanner for mandible (P<0.05). The precision of the i500 and Trios 3 scanners for mandible was superior to maxilla (P<0.05). The upper limit of 95% confidence intervals of trueness and precision of three scanners for both maxilla and mandible were within ±300 µm which was clinically accepted. The morphological error of jaw relation record of the three scanners was (337.68±128.54) µm, (342.89±195.41) µm, and (168.62±88.35) µm. The 95% confidence intervals of i500 and Trios 3 scanners were over 300 µm. CEREC Primescan scanner was significantly superior to i500 scanner(P<0.05).The displacement of the jaw position of the three scanners was (0.83±0.56) mm, (0.80±0.45) mm, and (0.91±0.75) mm for vertical dimension; (0.79±0.58) mm, (0.62±0.18) mm, and (0.53±0.53) mm for anterior and posterior directions; (0.95±0.59) mm, (0.69±0.45) mm, and (0.60±0.22) mm for left and right directions. The displacement of the jaw position of the three scanners in vertical dimension, anterior and posterior directions and the left and right directions were within the 95% consistency limit. CONCLUSION: Three intraoral scanners showed good trueness and precision. The i500 and Trios 3 scanners had more errors in jaw relation record, but they were used as primary jaw relation record. It is suggested that three intraoral scanners can be used for obtaining digital data to make diagnostic dentures and individual trays, reducing possible deforming or crack when sending impressions from clinic to laboratory.

Acute Toxicity and Hazardous Concentrations of Zinc to Native Freshwater Organisms Under Different pH Values in China.

Zinc bioavailability to aquatic organisms varies greatly under different pH values. In the present study, five native species in China and four common international test species were selected to investigate the influence of changing pH on acute zinc toxicity. The results showed that the higher trophic levels exhibited increasing sensitivity to zinc as pH decreased. However, when the pH value was between 8 and 11, the acute toxicity of zinc was relatively constant. In addition, by using a species-sensitivity distribution (SSD) method, the short-term hazardous concentrations of zinc at different pH values (based on the 5th percentiles of the pH-specific SSDs) were determined to be 17.26 µg/L (pH 4), 48.31 µg/L (pH 5), 80.34 µg/L (pH 6) and 230.6 µg/L (pH 7), respectively. The present study provides useful information for deriving water quality criteria and assessing the risks of metals in the near future.

[Research progress of interaction models between intestinal microflora and host cells].

Intestinal microbes play an important role in human health. The development of various clinical diseases, such as obesity, diabetes and cardiovascular disease, is closely related to the imbalance of intestinal microflora. With the development of high-throughput sequencing technology, there has been a breakthrough in the understanding of intestinal microorganism. The interaction between intestinal epithelial cells and intestinal microbes has become one of the hotspots and difficulties of current research. Because of the constraints of ethical review and experimental cost, people are more interested in the development of interaction models between the intestinal microflora and the host cells. In this paper, interaction models between intestinal microflora and host cells, and its working principle and application prospect are reviewed, hoping to provide new techniques and new ideas for studying functions of intestinal microbes.

[Depletion of GP73 inhibits invasion and metastasis of hepatocellular carcinoma cells].

Objective: To explore the in vitro and in vivo effect of GP73 on the proliferation, invasion and metastasis in hepatocellular carcinoma. Methods: GP73 gene was knocked out using CRISPR/Cas9 gene editing system in H22 and HepG2 cells, and stable knock out strains were constructed. The knockout efficiency was measured by western blot. Colony formation assay was used to detect the effect of GP73 on long-term survival ability. Cells were then highly synchronized in G(1) phase upon treatment with cell synchronization reagents (mimosine), and the percentage of cells in G(2)/M phase at different time points was detected by flow cytometry. The invasive and metastasis abilities of hepatocellular carcinoma cells were detected by Transwell™ assay. Furthermore, the tumor formation abilities in vivo were examined using subcutaneous xenograft models. Results: The stable knock out strains of GP73 in H22 and HepG2 cells were successfully established via puromycin selection. The number of colonies of GP73 knock out groups in HepG2 and H22 cells 10 days after transfection were 400±70 and 248±60, respectively. They were significantly lower than those in the control groups (980±40 and 1 100±50, respectively; P<0.01). In addition, GP73 knockout slowed down the cell cycle progression. Moreover, the cell numbers that had migrated to the underside of the filters were 312±50 and 305±49 in the GP73 knockout groups of HepG2 and H22 cells, respectively, significantly lower than 1 540±87 and 1 270±86 in the controls (P<0.01). For transwell invasion assay, the cell number that had invaded into the underside of the filters were 230±47 and 238±54 in the GP73 knockout groups of HepG2 and H22 cells, respectively, significantly lower than 648±74 and 596±63 in the controls(P<0.01). Furthermore, the tumor volume of GP73 knockout group was (70±170) mm(3,) significantly smaller than (1 200±110)mm(3) of the control guoup (P<0.01). Conclusions: GP73 knockout decreases the proliferation, invasive and migratory abilities of HepG2 and H22 cells in vitro and in vivo. GP73 may contribute to tumorigenesis of hepatocellular carcinoma.

Anomalous optical forces on the anisotropic Rayleigh particles.

We investigate the optical forces on the radially anisotropic spheres from an incident plane wave based on our generalized full-wave scattering theory and the Maxwell stress tensor integration techniques. We demonstrate that the optical force on the Rayleigh sphere with radial anisotropy does not always obey the well-known Rayleigh's law F~k04a(6) (where k(0) is the wave number and a is the radius of the sphere), but could be anomalous with the laws such as F~k00a(2), F~k0-2a(0), and F~k08a(10) under certain conditions. Therefore, the optical force on the anisotropic Rayleigh spheres is enhanced at the electric dipole resonance, and may be further increased by tuning the anisotropic parameters. On the contrary, the optical forces on the anisotropic spheres can be largely reduced for anisotropic spheres with electromagnetic transparency.

Thermal response of a dental tissue induced by femtosecond laser pulses.

This paper reports a theoretical and experimental study for thermal transport in a thin slice of human tooth induced by a 120 fs, 800 nm pulse laser at a repetition rate of 1 kHz. The surface reflectivity of enamel and the convection heat transfer coefficient were determined using an inverse heat transfer analysis. Instead of a fully three-dimensional modeling, two simplified two-dimensional (2D) planar and axisymmetric heat conduction models were proposed to simulate the temperature fields. The temperature responses obtained from the 2D planar and axisymmetric model agree well with the experimental measurements. On the other hand, the one-dimensional (1D) result significantly differs from the 2D axisymmetric one, suggesting that care should be taken when a 1D thermal model is considered for estimating temperature response.

Nonequilibrium phase change in gold films induced by ultrafast laser heating.

Ultrafast laser-induced melting in a gold thin film is simulated by an integrated continuum-atomistic method with the extended Drude model for dynamic optical properties. The local order parameter of atoms is used to identify solid and liquid regions. It is shown that the film is superheated in the early nonequilibrium stage and the melted region grows very quickly with a very high rate of melting up to ∼13,300 m/s. It is also found that the continuum approach could significantly underestimate the ultrafast phase-change response, and temperature-dependent optical properties should be considered in atomic-level modeling for ultrafast laser heating.

Examining the neural impact of pediatric concussion: a scoping review of multimodal and integrative approaches using functional and structural MRI techniques.

PURPOSE OF REVIEW: This study presents the findings from a scoping review of recent, original research investigating changes in brain structure and/or function following pediatric concussion or mild traumatic brain injury (mTBI) using MRI and functional MRI techniques. RECENT FINDINGS: Our scoping review identified only five studies, two of which were focused specifically on sports-related concussion. A common finding across studies was that traditional structural methods such as anatomical T1, T2, and even susceptibility-weighted MRI failed to reveal abnormalities in brain structure following pediatric concussion/mTBI. Although data suggest alterations in brain function associated with concussion, correlation with changes in performance is inconsistently found, possibly because of the use of compensatory cerebral mechanisms or alternate pathways while the brain is still dysfunctional. SUMMARY: In conclusion, the literature describing neuroimaging investigations of pediatric concussion is too scarce to allow the formulation of definitive conclusions regarding the impact of concussion on the developing brain. There is a dire need for longitudinal, multisite investigations focused on a wider age range and recovery period.

[Accuracy analysis of full-arch implant digital impressions when using a geometric feature].

Objective: To evaluate the effect of adding a geometric feature on the accuracy of digital impressions obtained by intraoral scanners for implant restoration of edentulous jaw quantitatively. Methods: A dentiform model of the maxilla of completely edentulous arch with 6 implant analogs+scan bodies (No. 1-6) was selected as the reference model. Without geometric feature, the dentiform model was scanned by dental model scanner and repeated for 5 times as true value group. Before and after adding the geometric feature, the same operator used intraoral scanner A (Trios 3) and B (Aoralscan 2) to scan the dentiform model with the same scanning path. Each type of intraoral scanner scanned 10 times and ".stl " datas were obtained. The results were imported into reverse engineering software (Geomagic Studio 2015). The linear distances of center point of upper plane between sacn body 1 to 6 was calculated, denoted as D12, D13, D14, D15 and D16. Trueness was the absolute value subtracted from the measured value of the intraoral scanner groups and true value; precision was the absolute value of pairwise subtraction of the measured values in the intraoral scanner groups.The smaller the value, the better the accuracy or precision.With or without the feature, all scan data were statistically analyzed, and the effect of adding geometric feature on the trueness and precision of the two intraoral scanners were evaluated. Results: As for intraoral scanner A, with the feature in place, significant differences were found in D14, D15, D16 for tureness(t=2.66, 2.75, 2.95, P<0.05); the trueness for D16 decreased from (101.9±47.1) µm to (49.6±30.3) µm. On the other hand, with features on the edentulous area, the precision was significantly increased in D15 and D16 (U=378.00, 672.00, P<0.05); the precision for D15 decreased from 40.8 (45.1) µm to 13.1 (17.0) µm. As for intraoral scanner B, the trueness of D12, D13 and D14 after adding geometric features was significantly better than before (t=3.02, 2.66, U=22.00, P<0.05). With feature on the edentulous area, the trueness for D13 decreased from (116.6±41.2) µm to (70.8±35.5) µm. There was no statistical significance in the trueness of D15 and D16 with or without geometric feature (P>0.05), however, the precision of D15 and D16 after adding geometric feature was significantly better than before (U=702.00, 489.00,P<0.05). The precision of D16 decreased from 112.5 (124.7) µm to 35.9 (85.8) µm. Conclusions: The use of geometric feature in edentulous space improves the trueness and precision of the different principle intraoral scanners tested.

[Quantitative study of intraoral scanners' accuracy].

Objective: To establish a standard method to evaluate the scanning accuracy of intraoral scanner (IOS) and to investigate six IOS's scanning accuracy and the relationship between different scan span. Methods: Five simplified six abutments full arch model were fabricated by high accuracy (5 µm) milling machine with 7075 aluminum alloy. The machining accuracy, which was verified by a coordinate measuring machine with higher accuracy (0.7 µm), was considered as the reference accuracy. The model with the highest machining accuracy was considered as the test model in IOS's scanning accuracy test, and computer-aided design (CAD) data of the model was used as the reference data. Six IOS scanned the test model 10 times with the same scanning path, obtained 60 test data. CAD data and test data were input into Geomagic Studio 2014. The preparation part above the margin of the abutments of the data was isolated and divided into 4 segments of interest: single crown, three-unit bridge, five-unit bridge, and full arch. The test data were then best-fit aligned to CAD data or each other followed by deviation analysis. Scanning trueness and precision were then calculated. Results: The mid-value of scanning trueness and precision of six IOS in single crown, three-unit bridge, five-unit bridge and full arch were 13.3-29.6 µm and 7.6-20.7 µm, 15.4-30.9 µm and 8.7-26.5 µm, 17.0-66.1 µm and 11.3-44.2 µm, 24.0-107.9 µm and 24.6-150.1 µm respectively. Conclusions: Long-span scanning can affect the accuracy of IOS to a varying extent.

Ameliorative effect of quercetin on the destruction caused by experimental periodontitis in rats.

BACKGROUND AND OBJECTIVE: The purpose of this study was to evaluate the effect of quercetin, a flavonol that exhibits anti-inflammatory properties, on experimental periodontal destruction in rats. MATERIAL AND METHODS: Osteoclast formation on maxillary palatal alveolus was induced with daily lipopolysaccharide (LPS) injections (0, 1 or 5 mg/mL) for 3 d. Five days later, the osteoclasts on bony surfaces were counted after histochemical staining for tartrate-resistant acid phosphatase. The effect of intragastric quercetin on the osteoclast formation was evaluated in the following three groups: quercetin (75 mg/kg/d by oral feeding); LPS (5 mg/mL); and quercetin plus LPS. Moreover, the effect of quercetin on the ligature-induced periodontitis around maxillary second and mandibular first molars was further evaluated by microcomputerized tomography (on days 0, 4, 8 and 12) and by histometry (on day 8). RESULTS: A dose-dependent increase in osteoclasts occurred after LPS injections. However, quercetin (75 mg/kg) reduced the 5 mg/mL LPS-induced osteoclasts. Using microcomputerized tomography, the bone crest levels at ligation sites were found to be significantly more apical than at the control sites on days 8 and 12; however, the apically located bone crests rebounded in rats from the quercetin-plus-ligation group. Histometry demonstrated significantly more coronal alveolar crest bone levels, less inflammatory cell-infiltrated connective tissue areas and less connective tissue attachments in the ligation-plus-quercetin group compared with those in the ligation group. CONCLUSION: As the quercetin could reduce the LPS-induced osteoclast formation and the ligature-enhanced periodontal inflammation and bone loss, we suggest that it may have an ameliorative effect on periodontal destruction.

[Research and development of clinical application accuracy of intraoral three-dimensional scanning technology].

Intraoral three-dimensional scanning technology has been adopted in stomatology field and developed rapidly with improved accuracy. At present, the scanning accuracy of the intraoral three-dimensional scanners used in restoration of single crown, three unit fixed partial bridge and single implant crown satisfies the clinical requirements. While for restoration of multi-unit fixed, the scanning accuracy is not enough. There are still technical bottlenecks for scanning functional motion boundary of soft tissue, especially for direct acquisition of edentulous functional impressions. Through literature review and analysis, we summarize the intraoral scanning accuracy of oral hard and soft tissues, and analyze the clinical applicability and limitations of intraoral scanning technology, providing reference for clinical application.

Two binding orientations for peptides to the Src SH3 domain: development of a general model for SH3-ligand interactions.

Solution structures of two Src homology 3 (SH3) domain-ligand complexes have been determined by nuclear magnetic resonance. Each complex consists of the SH3 domain and a nine-residue proline-rich peptide selected from a large library of ligands prepared by combinatorial synthesis. The bound ligands adopt a left-handed polyproline type II (PPII) helix, although the amino to carboxyl directionalities of their helices are opposite. The peptide orientation is determined by a salt bridge formed by the terminal arginine residues of the ligands and the conserved aspartate-99 of the SH3 domain. Residues at positions 3, 4, 6, and 7 of both peptides also intercalate into the ligand-binding site; however, the respective proline and nonproline residues show exchanged binding positions in the two complexes. These structural results led to a model for the interactions of SH3 domains with proline-rich peptides that can be used to predict critical residues in complexes of unknown structure. The model was used to identify correctly both the binding orientation and the contact and noncontact residues of a peptide derived from the nucleotide exchange factor Sos in association with the amino-terminal SH3 domain of the adaptor protein Grb2.

A longitudinal study of Taiwanese sialidosis type 1: an insight into the concept of cherry-red spot myoclonus syndrome.

BACKGROUND AND PURPOSE: Sialidosis type 1 (ST-1) is a neurodegenerative disorder with limited long-term follow-up report. This study is to document the chronological profile of ST-1. METHODS: We perform serial analysis of 17 Taiwanese patients with ST-1 focusing on evolution of clinical features, electrophysiological findings, genetic studies, and neuroimage examinations. RESULTS: All patients had a mutation at 554A-->G in exon 3 of the NEU1 gene causing Ser182Gly substitution. Fifteen patients were homozygous. Two patients were heterozygous with novel mutations, 956C-->T causing Ala319Val in one and 163C-->T causing Gln55stop codon in the other. The neuraminidase activity was markedly decreased in all 11 available patients. Only three patients (17.6%) manifested the macular cherry-red spot. The majority of patients (82.3%) developed full-blown manifestation of myoclonus, ataxia, and seizures within 5 years. Abnormal somatosensory evoked potentials with giant cortical waves were found in all patients. Prolonged P100 peak latency of the visual evoked potentials (VEPs) were found in 16 patients (94.1%) in the early stage even without visual symptoms. CONCLUSION: ST-1 in Taiwanese population illustrates distinct characteristics of phenotype with infrequent cherry-red spot. We suggest to screen the NEU1 mutations in patients presenting action myoclonus with abnormal VEPs, even without macular cherry-red spots.

Solubility of heavy metals added to MSW.

This paper aims to investigate the six heavy metal levels (Cd, Cr, Cu, Pb, Ni and Zn) in municipal solid waste (MSW) at different pHs. It intends to provide the baseline information of metals solubility in MSW co-disposed or co-digested with MSW incinerator ashes in landfill or anaerobic bioreactors or heavy metals contaminated in anaerobic digesters. One milliliter (equal to 1mg) of each metal was added to the 100ml MSW and the batch reactor test was carried out. The results showed that higher HNO3 and NaOH were consumed at extreme pH of 1 and 13 compared to those from pH 2 to 11 due to the comparably higher buffer capacity. Pb was found to have the least soluble level, highest metal adsorption (%) and highest partitioning Kd (lg(-1)) between pH 3 and 12. In contrast, Ni showed the highest soluble level, lowest metal adsorption (%) and lowest Kd (lg(-1)) between pH 4 and 12. Except Ni and Cr, other four metals seemed to show the amphibious properties as comparative higher solubility was found in the acidic and basic conditions.

Biostabilization assessment of MSW co-disposed with MSWI fly ash in anaerobic bioreactors.

Municipal solid waste incinerator (MSWI) fly ash has been examined for possible use as landfill interim cover. For this aim, three anaerobic bioreactors, 1.2m high and 0.2m in diameter, were used to assess the co-digestion or co-disposal performance of MSW and MSWI fly ash. Two bioreactors contained ratios of 10 and 20 g fly ash per liter of MSW (or 0.2 and 0.4 g g(-1) VS, that is, 0.2 and 0.4 g fly ash per gram volatile solids (VS) of MSW). The remaining bioreactor was used as control, without fly ash addition. The results showed that gas production rate was enhanced by the appropriate addition of MSWI fly ash, with a rate of approximately 6.5l day(-1)kg(-1)VS at peak production in the ash-added bioreactors, compared to approximately 4l day(-1)kg(-1)VS in control. Conductivity, alkali metals and VS in leachate were higher in the fly ash-added bioreactors compared to control. The results show that MSW decomposition was maintained throughout at near-neutral pH and might be improved by release of alkali and trace metals from fly ash. Heavy metals exerted no inhibitory effect on MSW digestion in all three bioreactors. These phenomena indicate that proper amounts of MSWI fly ash, co-disposed or co-digested with MSW, could facilitate bacterial activity, digestion efficiency and gas production rates.