Ferroptosis and Lipid Metabolism in Acute Myocardial Infarction.

Acute myocardial infarction (AMI) is triggered by the blockage of coronary arteries, leading to restricted blood flow to the myocardium, which results in damage and cell death. While the traditional understanding of cell death primarily revolves around apoptosis, a new player in the game has emerged: ferroptosis. This novel form of cell death relies on iron and is propelled by reactive oxygen species (ROS). Lipid metabolism, an indispensable physiological process, plays a vital role in preserving cellular homeostasis. However, when this metabolic pathway is disrupted, the accumulation of excess waste increases, specifically lipid peroxides, which are strongly linked to the occurrence and progression of AMI. As a result, comprehending this complex interaction between ferroptosis and lipid metabolism could pave the way for new therapeutic approaches in tackling AMI.

Salt-Assisted, In Situ Current Nanowelding of an Interfacial Au Nanoparticle Film for a High-Performance Electrocatalyst.

Interfacial self-assembly is a well-established method for the preparation of a two-dimensional (2D) metal nanofilm from nanoscale building blocks. However, the as-prepared nanofilm exhibits limited conductivity because of the large contact resistance at the junctions among its building blocks. Here, we report a salt-assisted, in situ current nanowelding strategy to weld an interfacial Au nanoparticle (NP) film for downstream applications, such as high-performance electrocatalysts. Particularly, we found that salt-assisted interfacial assembly can reduce the size of the nanogaps among neighboring Au NPs and, in turn, greatly improve the conductivity of the resultant Au NP film. Consequently, the Au NP film can be readily welded using current, and the welding extent can be monitored in real-time by looking at the passing current. The welding finally produces a nanoporous Au film (NPGF) with a network nanostructure, high conductivity, and abundant active sites so that it delivers a large current density of 86.96 µA·cm-2 (1.81 times higher than that from the pristine Au NP film) and shows improved cycling stability for methanol electrooxidation. Thus, these results offer a low-cost, solution-processable approach for the fabrication of a large-area, interconnected nanofilm from nanoscale building blocks beyond Au NPs, which may find diverse downstream applications.

Effect of Osteoporosis Treatments on Osteoarthritis Progression in Postmenopausal Women: A Review of the Literature.

PURPOSE OF REVIEW: The purpose of this literature review was to determine if medications used to treat osteoporosis are also effective for treating osteoarthritis (OA). RECENT FINDINGS: A total of 40 relevant articles were identified. Studies were categorized into those (1) discussing estrogen and selective estrogen receptor modulators (SERMs), (2) bisphosphonates, (3) parathyroid hormone (PTH) analogs, and (4) denosumab, and (5) prior review articles. A large amount of evidence suggests that estrogen and SERMs are effective at reducing OA symptoms and disease progression. Evidence suggests that bisphosphonates, the most common medications used to treat osteoporosis, can reduce OA symptoms and disease progression. In vivo studies suggest that PTH analogs may improve the cartilage destruction associated with OA; however, few human trials have examined its use for OA. Denosumab is approved to treat osteoporosis, bone metastases, and certain types of breast cancer, but little study has been done with respect to its effect on OA. The current evidence indicates that medications used to treat osteoporosis are also effective for treating OA. Estrogen, SERMs, and bisphosphonates have the most potential as OA therapies. Less is known regarding the effectiveness of PTH analogs and denosumab in OA, and more research is needed.

Therapeutic advantage of teriparatide in very elderly patients with proximal femoral fractures: a functional and BMD analysis.

BACKGROUND: Teriparatide, a recombinant parathyroid hormone, is pivotal in osteoporosis treatment, particularly in post-surgical recovery for hip fractures. This study investigates its efficacy in functional recovery post-hip fracture surgery in elderly patients, a demographic particularly susceptible to osteoporotic fractures. METHODS: In this retrospective cohort study, 150 elderly patients with proximal femoral fractures undergoing open reduction and internal fixation were enrolled. They were categorized into two groups: receiving 20 µg of daily teriparatide injections for 18 months and receiving standard antiresorptive medications during a 24-month follow-up. Detailed records of patient demographics, Fracture Risk Assessment Tool scores, and comorbidities were kept. Key outcomes, including bone mineral density (BMD) and functional scores (Barthel Index and Visual Analog Scale for hip pain), were evaluated at 3 and 24 months post-surgery. RESULTS: Out of the original cohort, 126 patients (20 men and 106 women with an average age of 85.5 ± 9.3 years) completed the study. The teriparatide group exhibited significant enhancements in both functional scores and BMD when compared to the control group. Notably, functional improvements were less pronounced in male patients compared to female patients. Additionally, the incidence of new fractures was markedly lower in the teriparatide group. CONCLUSION: Administering teriparatide daily for 18 months post-surgery for proximal femoral fractures significantly benefits very elderly patients by improving functionality and bone density, with observed differences in recovery between genders. These results reinforce the efficacy of teriparatide as a potent option for treating osteoporosis-related fractures in the elderly and highlight the importance of considering gender-specific treatment and rehabilitation strategies.

Femoral neck system versus multiple cannulated screws for the fixation of Pauwels classification type II femoral neck fractures in older female patients with low bone mass.

BACKGROUND: Femoral neck fractures in older adult patients are a major concern and often necessitate surgical intervention. This study compared the clinical outcomes of 2 surgical techniques: the femoral neck system (FNS) and cannulated compression screws (CCSs). METHODS: A total of 40 female patients (mean age 73.50 ± 11.55 years) with femoral neck fractures of Pauwels classification type II and receiving surgical fixation between 2020 and 2022 were enrolled. The patients were categorized into an FNS group (n = 12) or a CCS group (n = 28), and surgical duration, intraoperative blood loss, length of hospital stay, and incidence of postoperative adverse events were analyzed. RESULTS: No significant intergroup differences in demographic characteristics were discovered. The mean surgical duration for all patients was 52.88 ± 22.19 min, with no significant difference between the groups. However, the FNS group experienced significantly higher intraoperative blood loss (P = 0.002) and longer hospital stay (P = 0.023) than did the CCS group. The incidence of osteonecrosis was higher in the CCS group, whereas the incidence of nonunion or malunion was higher in the FNS group. The surgical method did not appear to be a significant risk factor. The main risk factor for revision surgery was longer duration until the first adverse event (P = 0.015). CONCLUSION: The FNS does not appear to provide superior surgical outcomes compared with CCSs in older adult women with Pauwels classification type II femoral neck fractures. A longer duration between surgical fixation and the first adverse event before stabilization of the fracture site may be a risk factor for revision surgery.

Characteristics and effects on daily lives of pelvic girdle pain during early postpartum in Beijing women, China.

Pelvic girdle pain (PGP) is a common problem during pregnancy and postpartum and negatively affects women's well-being. Yet it is not well known in China. This study assessed PGP's intensity, location, and quality and the status of daily activities on postpartum women with pain, and explored the relationship between pain and the prevalence of depressive symptoms. A cross-sectional study recruiting 1,038 eligible women at 6 weeks postpartum from the obstetric clinic of a hospital was conducted in Beijing, China. Data were collected using self-reported questionnaires, including Introductory information form, Body chart, Number Rating Scale, McGill Pain Questionnaire-2, Pelvic Girdle Questionnaire, and Edinburgh Postnatal Depression Scale. In this study, 32.2 percent women experienced pain. The mean (SD) pain intensity score was 3.07 ± 1.60. About 50.6 percent women experienced sacroiliac joint pain, and 25.5 percent women experienced pain in a combination of locations. About 73.1 percent women experienced aching pain, and 57.5 percent experienced more than one kind of pain quality. The mean total score, which assesses activity and symptom limitations, was 21.93 ± 17.35 (percent), of which a normal sex life (1.29 ± 0.94) was made more challenging due to pain. In mental health, the prevalence of depressive symptoms coincided with the prevalence of pain (p = 0.008). Postpartum PGP still needs to be taken seriously, and women with pain require further support. The above knowledge offers information to manage pain, daily lives and depressive symptoms, contributes to think about strategies to better promote postpartum women physical and mental health in the future.

Epigallocatechin-3-gallate stabilizes aqueous curcumin by generating nanoparticles and its application in beverages.

In this study, we addressed the limited water solubility of curcumin by utilizing epigallocatechin-3-gallate to form nanoparticles through self-assembly. The resulting particles, ranging from 100 to 150 nm, exhibited a redshift in the UV-visible spectrum, from 425 nm to 435 nm, indicative of potential π-π stacking. Molecular docking experiments supported this finding. Curcumin loaded with epigallocatechin-3-gallate showed exceptional dispersibility in aqueous solutions, with 90.92 % remaining after 60 days. The electrostatic screening effect arises from the charge carried by epigallocatechin-3-gallate on the nanoparticles, leading to enhanced retention of curcumin under different pH, temperature, and ionic strength conditions. Furthermore, epigallocatechin-3-gallate can interact with other hydrophobic polyphenols, improving their dispersibility and stability in aqueous systems. Applying this principle, a palatable beverage was formulated by combining turmeric extract and green tea. The nanoparticles encapsulated with epigallocatechin-3-gallate show potential for improving the applicability of curcumin in aqueous food systems.

Macrophage polarization: an important role in inflammatory diseases.

Macrophages are crucial cells in the human body's innate immunity and are engaged in a variety of non-inflammatory reactions. Macrophages can develop into two kinds when stimulated by distinct internal environments: pro-inflammatory M1-like macrophages and anti-inflammatory M2-type macrophages. During inflammation, the two kinds of macrophages are activated alternatively, and maintaining a reasonably steady ratio is critical for maintaining homeostasis in vivo. M1 macrophages can induce inflammation, but M2 macrophages suppress it. The imbalance between the two kinds of macrophages will have a significant impact on the illness process. As a result, there are an increasing number of research being conducted on relieving or curing illnesses by altering the amount of macrophages. This review summarizes the role of macrophage polarization in various inflammatory diseases, including autoimmune diseases (RA, EAE, MS, AIH, IBD, CD), allergic diseases (allergic rhinitis, allergic dermatitis, allergic asthma), atherosclerosis, obesity and type 2 diabetes, metabolic homeostasis, and the compounds or drugs that have been discovered or applied to the treatment of these diseases by targeting macrophage polarization.

Characteristics and catalytic mechanism of a novel multifunctional oxidase, CpmO, for chloramphenicols degradation from Sphingobium sp. WTD-1.

Chloramphenicols (CAPs) are ubiquitous emerging pollutants that threaten ecological environments and human health. Microbial and enzyme-based biodegradation strategies offer a cost-effective environmentally friendly approach for CAPs removal from contaminated sites. Here, CpmO, a novel multifunctional oxidase for CAP degradation was identified from the CAP-degrading strain Sphingobium sp. WTD-1. This enzyme was found to be responsible for both the oxidation of the C3-hydroxyl and oxidative cleavage of the C1-C2 bond of CAP, and the oxidative cleavage pathway of CAP was dominant. The catalytic efficiency of CpmO for CAP was 41.6 times that for thiamphenicol (TAP) under the optimal conditions (40 °C, pH 6.0). CpmO was identified as a member of the glucose-methanol-choline oxidoreductase family. Molecular docking and site-directed mutagenesis analysis indicated that CAP was connected to the key amino acid residues E231/E395, K277, and I273/A276 in CpmO through hydrogen bonding, nonclassical hydrogen bonding, and π-π stacking forces, respectively. The catalytic activities of the A276W, K277P, and E231S mutants were found to be 1.1 times, 6.4 times, and 13.2 times higher than that of the wild type, respectively. These findings provide genetic resources and theoretical guidance for future application in biotechnological and metabolic engineering efforts for the remediation of CAPs-contaminated environments.

Enhance the resistance of probiotics by microencapsulation and biofilm construction based on rhamnogalacturonan I rich pectin.

Microcapsules were always used as functional material carriers for targeted delivery and meanwhile offering protection. However, microcapsule wall materials with specific properties were required, which makes the choice of wall material a key factor. In our previous study, a highly branched rhamnogalacturonan I rich (RG-I-rich) pectin was extracted from citrus canning processing water, which showed good gelling properties and binding ability, indicating it could be a potential microcapsule wall material. In the present study, Lactiplantibacillus plantarum GDMCC 1.140 and Lactobacillus rhamnosus were encapsulated by RG-I-rich pectin with embedding efficiencies of about 65 %. The environmental tolerance effect was evaluated under four different environmental stresses. Positive protection results were obtained under all four conditions, especially under H2O2 stress, the survival rate of probiotics embedded in microcapsules was about double that of free probiotics. The storage test showed that the total plate count of L. rhamnosus encapsulated in RG-I-rich pectin microcapsules could still reach 6.38 Log (CFU/mL) at 25 °C for 45 days. Moreover, probiotics embedded in microcapsules with additional incubation to form a biofilm layer inside could further improve the probiotics' activities significantly in the above experiments. In conclusion, RG-I-rich pectin may be a good microcapsule wall material for probiotics protection.

Identifying Factor Associations Emerging from an Academic Metaverse Event for Scholars in a Postpandemic World: Social Presence and Technology Self-Efficacy in Gather.Town.

COVID-19 has prompted conferences to transition to online formats, inadvertently diminishing their emphasis on the social element. In online events, a sense of presence leading to a sense of companionship is limited in conventional conferencing platforms. Although the extant body of research on virtual conferences is growing, academic events in the Metaverse get little attention. Such events and their relevance to social presence within the Metaverse and associations among observable factors are seldom discussed. This study examined the perspectives of scholars in an online seminar during COVID-19 hosted in Gather.Town, a Metaverse-like conferencing environment. A hypothetical model was built to determine whether social presence and technology self-efficacy impact scholars' satisfaction and facilitate academic interactions. Ninety-three scholars in an academic seminar for research projects in information and computer education were polled to obtain data, which was then evaluated using partial least squares structural equation modeling (PLS-SEM). The proposed model explained 57.1 percent of the variables, and the findings showed that social presence and technology self-efficacy had a positive and significant impact on academic interactions and exchanges, as well as technology self-efficacy playing an essential role in determining overall satisfaction. However, social presence does not appear to have a direct impact on satisfaction, implying that a positive academic experience may still be achieved with or without the feature of being with others supported by the Metaverse. Although digital communication will only become more diverse and intense, it is important to understand how to maintain the basic character of human interactions virtually, even amid a pandemic. This research attempts to shed light on some critical factors in creating a conducive environment for future Metaverse-like academic events.

Co-encapsulation of hydrophilic and hydrophobic bioactives stabilized in nanostarch-assisted emulsion for inner core gel of coaxial 3D printing.

3D printing technology, especially coaxial 3D mode of multiple-component shaping, has great potential in the manufacture of personalized nutritional foods. However, integrating and stabilizing functional objectives of different natures remains a challenge for 3D customized foods. Here, we used starch nanoparticle (SNP) to assisted soy protein (SPI) emulsion to load hydrophilic and hydrophobic bioactives (anthocyanin, AC, and curcumin, Cur). The addition of SNP significantly improved the storage stability of the emulsion. Xanthan gum (XG) was also added to the SNP/SPI system to enhance its rheology and form an emulsion gel as inner core of coaxial 3D printing. Low field nuclear magnetic resonance and emulsification analyses showed that AC/Cur@SNP/SPI/XG functional inner core had a strong water binding state and good stability. After printing with outer layer, the SNP/SPI coaxial sample had the lowest deviation rate of 0.8 %. Also, SNP/SPI coaxial sample showed higher AC (90.2 %) and Cur (90.8 %) retention compared to pure starch (S), pure SNP, pure SPI, and S/SPI samples as well as SNP/SPI sample printed without outer layer. In summary, this study provides a new perspective for the manufacture of customized products as multifunctional foods, feeds and even potential delivery of drugs.

Novel Bifunctional Amidase Catalyzing the Degradation of Propanil and Aryloxyphenoxypropionate Herbicides in Rhodococcus sp. C-1.

Propanil residues can contaminate habitats where microbial degradation is predominant. In this study, an efficient propanil-degrading strain C-1 was isolated from paddy and identified as Rhodococcus sp. It can completely degrade 10 µg/L-150 mg/L propanil within 0.33-10 h via the hydrolysis of the amide bond, forming 3,4-dichloroaniline. A novel bifunctional amidase, PamC, was identified in strain C-1. PamC can catalyze the hydrolysis of the amide bond of propanil to produce 3,4-dichloroaniline as well as the hydrolysis of the ester bonds of aryloxyphenoxypropionate herbicides (APPHs, clodinafop-propargyl, cyhalofop-butyl, fenoxaprop-p-ethyl, fluazifop-p-butyl, haloxyfop-p-methyl, and quizalofop-p-ethyl) to form aryloxyphenoxypropionic acids. Molecular docking and site-directed mutagenesis confirmed that the catalytic triad Lys82-Ser157-Ser181 was the active center for PamC to hydrolyze propanil and cyhalofop-butyl. This study presents a novel bifunctional amidase with capabilities for both amide and ester bond hydrolysis and enhances our understanding of the molecular mechanisms underlying the degradation of propanil and APPHs.

Optimisation and characterisation of KOH-activated carbon obtained from Baijiu spent grains for the mitigation of risk factors in alcoholic beverages.

This study aims to repurpose waste grain from the Baijiu brewing process into activated carbon for mitigating risk factors in alcoholic beverages, enhancing quality and ensuring safety. For attaining the most effective activated carbon, tailored carbon synthesis conditions were identified for diverse alcoholic beverages, optimising strategies. For beverages with low flavour compound content, optimal conditions include 900 °C calcination, 16-hour activation and a 1:2 activation ratio. In contrast, for those with abundant flavour compounds, 800 °C calcination, 16-hour activation and a 1:1 activation ratio are recommended. Post-synthesis analyses, employing nitrogen physisorption-desorption isotherms, FT-IR and SEM, validated a significant BET surface area of 244.871 m2/g for the KOH-activated carbon. Critical to adsorption efficiency, calcination temperature showcased noteworthy micro-porosity (0.8-1 nm), selectively adsorbing higher alcohols (C3-C6) and acetaldehyde while minimising acid and ester adsorption. Sensory evaluations refined optimal parameters, ensuring efficient spent grain management and heightened beverage safety without compromising aroma.

Flavor Perception and Formation Mechanism of Empty Cup Aroma in Soy Sauce Aroma Type Baijiu.

The research focused on the distinctive empty cup aroma, with the aim of identifying the key aroma compounds and the formation mechanism of empty cup aroma in soy sauce aroma type baijiu (SSB). The lasting times of SSB is significantly longer than that of other types of baijiu, with an average duration of 28 days. Key compounds such as 2,3-dimethyl-5-ethylpyrazine, phenylethyl alcohol, p-cresol, sotolon, benzeneacetic acid were identified in empty cup aroma due to their highest flavor dilution factor. Molecular dynamics (MD) simulation was performed to study the mechanism of empty cup aroma on the liquid-gas interface and solid-gas interface. The results revealed the existence of hydrogen bonding and van der Waals forces between sotolon and lactic acid, a representative nonvolatile compound, which are speculated to be an important reason for the empty cup aroma.

Comprehensive analysis of risk factors (methanol, acetaldehyde and higher alcohols) in alcoholic beverages and their reduction strategies: GC-MS analysis and modified activated carbon adsorption and characterization.

This study endeavors to examine the levels of risk factors in alcoholic beverages and propose mitigation strategies. GC-MS analysis was utilized to assess risk factors in various distilled-spirits. The content of such risk factors in spirits ranked as follows: vodka ≈ gin < baijiu < whiskey < brandy, and all were adhering to the Chinese national standard. Additionally, a method was refined to alleviate these risks, employing various reagents for activated carbon modification and evaluating their adsorption efficiency for risk factors reduction. Oxalic acid-modified activated carbon exhibited promising adsorption rates for risk factors with acceptable flavor compounds loss, rendering it a prospective solution for health hazard reduction. Characterization via SEM and nitrogen-adsorption-desorption was conducted on the optimal material, complemented by sensory experiments to optimize its application. This study offers valuable insights into the content of risk factors in alcoholic beverages, aiding in improving quality and safety of alcoholic beverages.

Synergistic Effects of TiO2 and Carbon Black for Water Evaporation-Induced Electricity Generation.

Water evaporation-induced electricity generators (WEGs) have drawn widespread attention in the field of hydrovoltaic technology, which can convert atmospheric thermal energy into sustainable electric power. However, it is restricted in the wide application of WEGs due to the low power output, complex fabrication process, and high cost. Herein, we present a simple and effective approach to fabricate TiO2-carbon black film-based WEGs (TC-WEGs). A single TC-WEG device can sustainably output an open-circuit voltage of 1.9 V and a maximum power density of 40.9 µW/cm2. Moreover, it has been shown that TC-WEGs exhibit stable electrical energy output when operating in seawater, which can yield a short-circuit current of 1.2 µA. The superior electricity generation performance can be attributed to the intrinsic characteristics of the TC-WEGs, including hydrophilicity, porous structure, and electrical conductivity. This work provides an important reference for the constant harvesting of clean energy.

Risk factors for reoperation after discectomy of lumbar herniated intervertebral disc disease.

Objectives: Discectomy is the most common surgery for lumbar herniated intervertebral disc (HIVD) disease. However, 5%-24% of patients undergo a second surgery due to recurrent disc herniation. Materials and Methods: This study was aimed to identify the risk factors for reoperation after discectomy of lumbar HIVD and recommend treatment for patients with a high risk of reoperation. We recruited patients diagnosed as having single-level lumbar HIVD who underwent open discectomy from January 1, 2000, to December 31, 2012 in our hospital. We used a survival curve to inspect the survival time and reoperation rate after surgery. We discussed the correlation of reoperation rate with discectomy level, body mass index, heavy lifting after surgery, sex, and age. Furthermore, we investigated the correlation between the experience of a surgeon and the reoperation rate. Results: A total of 619 patients were enrolled in our study. Most patients were 40-60 years old (48.8%), and most of them had herniation at L4/5 level (48.9%). The 8-year survival rate was 92%. Weight lifting after surgery may increase the reoperation rate by 115 and 18 times for those >60 years and <40 years, respectively. In addition, less experience of the surgeon and female sex had a high reoperation rate. Conclusion: Postoperative working modification may be very important for preventing patients from recurrent HIVD. For elderly people with HIVD, a more conservative therapy could be selected. If patients with lumbar spine hypermobility or severe degeneration require wide laminectomy, primary fusion should be considered.

Organizing Pneumonia in A Patient Double-Positive for ANCA and Anti-GBM Antibodies: A Case Report / 中国医学科学杂志(英文版)

Both anti-glomerular basement membrane (GBM) disease and the anti-neutrophil cytoplasmic antibody (ANCA)-associated vasculitis (AAV) are common causes of pulmonary-renal syndrome. Organizing pneumonia (OP), a special pattern of interstitial lung disease, is extremely rare either in AAV or anti-GBM disease. We report an old woman presented with OP on a background of co-presentation with both ANCA and anti-GBM antibodies.