RESUMEN
Surface wrinkling is a promising route to control the mechanical, electrical, and optical properties of materials in a wide range of applications. However, previous artificial wrinkles are restricted to single or random orientation and lacks selectivity. To address this challenge, this study presents multidirectional wrinkle patterns with high selectivity and orientation through sequential uniaxial strain with conformal polymeric shadow masks. The conformal but nontraceable polymeric stencil with microapertures are adhered to a flat substrate prior to oxidation, which forms discrete and parallel wrinkles in confined domains without any contamination. By fully investigating the process, this study displays compound topography of wrinkles consisting of wrinkle islands and surrounding secondary wrinkles on the same surface. With this topography, various diffusion properties are presented: from semi-transparent yet diffusive films to multidirectional diffusive films, which will be available for new types of optical diffuser applications.
Asunto(s)
Polímeros/química , Envejecimiento de la Piel/fisiología , Piel , Humanos , Microscopía Electrónica de Rastreo , Conformación Molecular , Piel/química , Piel/ultraestructura , Propiedades de SuperficieRESUMEN
Zeolitic-imidazolate framework-8 (ZIF-8), composed of a zinc center tetrahedrally coordinated with 2-methylimidazolate linkers, has garnered extensive attention as a selective filler for propylene-selective mixed-matrix membranes (MMMs). Recently, we reported an innovative and scalable MMM fabrication approach, termed "phase-inversion in sync with in situ MOF formation" (PIMOF), aimed at addressing the prevailing challenges in MMM processing. In this study, we intend to investigate the effect of additives, specifically sodium formate and 1,4-butanediol, on the modification of ZIF-8 filler formation within the polymer matrix in order to further improve the separation performance of the asymmetric MMMs prepared by the PIMOF. Remarkably, MMMs prepared with sodium formate as an additive in the coagulation bath exhibited an unprecedented C3H6/C3H8 separation factor of 222.5 ± 1.8 with a C3H6 permeance of 10.1 ± 0.3 GPU, surpassing that of MMMs prepared without additives (a C3 separation factor of 57.7 ± 11.2 with a C3 permeance of 22.5 ± 4.5 GPU). Our computational work complements the experimental investigation by studying the effect of ZIF-8 nanoparticle size on the specific surface interaction energy and apertures of ZIF-8. Calculations indicate that by having smaller ZIF-8 nanoparticles, stronger interactions are present with the polymer affecting the aperture of ZIF-8 nanoparticles. This reduction in aperture size is expected to improve selectivity toward propylene by reducing the permeability of propylene. These results represent a significant advancement, surpassing the performance of all previously reported propylene-selective MMMs and most high-quality polycrystalline ZIF-8 membranes. The notably enhanced separation performance primarily arises from the formation of exceedingly small ZIF-8-like particles with an amorphous or poorly crystalline structure, corroborated by our computational work.
RESUMEN
Defense against chemical warfare agents (CWAs) is regarded as a top priority for the protection of humanity, but it still depends on physical protection with severe limitations such as residual toxicity and post-treatment requirement. In this study, a strategically designed functional polymeric substrate was composited with a metal-organic framework catalyst to remove toxicity immediately. A series of PMMA-BPEI copolymers exhibited high processability as a coating and accelerated the catalytic activity of Zr(IV)-based metal-organic framework catalysts (UiO-66). Among them, PMB12_40 composite coating on a cotton fabric, containing a PMMA-BPEI copolymer (PMMA/BPEI = 1/2) and 40% of UiO-66 catalyst, can efficiently decompose nerve agent simulants (methyl-paraoxon) under both liquid phase (t1/2 = 0.14 h) and humidified (t1/2 = 4.8 h) conditions. Moreover, a real agent, GD, was decomposed 100% by PMB12_40 in 4 h at 25 °C and 65% relative humidity. On the basis of superior catalytic activity, the PMB composites are anticipated to be a potential material for active chemical protection coating.
RESUMEN
Continuous and safe decomposition of chemical warfare agents (CWAs) is a critical requirement to protect both soldiers and citizens and to eliminate the stockpiles after the cold war. The Zr-based metal-organic framework (Zr-MOF) has been known as the most effective catalyst for decomposing CWAs, especially the most fatal nerve agents, however, its low processability due to the powder form limits its expansion to actual military applications. To this end, the composite membrane catalysts (CMCs) comprising the Zr-MOF (UiO-66 catalyst) and nylon 6 nanofiber (porous supporter) are developed by the simple integration of electrospray and electrospinning, resulting in selective immobilization of UiO-66 on the surface of the nylon 6 nanofibers. These strategical benefits of CMCs gave super catalytic durability including recyclability over five times without decreasing the catalytic activity for the decomposition of methyl paraoxon (MPO), a simulant of the nerve agent, in the presence of N-ethylmorpholine (N-EM), which was not achieved in the original particulate UiO-66. Because of the excellent physical and chemical stabilities of CMCs, the CMC with 56 wt % of UiO-66 (CMC56) decomposed 198 g of MPO within an hour in the continuous flow system with a flow rate of 21.6 mL h-1. This study highlights the important strategies in designing the feasible membrane-type catalysts with superior catalytic activity and robust durability for decomposing CWAs in the continuous flow system.
RESUMEN
Electroactive polymers with high dielectric constants and low moduli can offer fast responses and large electromechanical strain under a relatively low electric field with regard to theoretical driving forces of electrostriction and electrostatic force. However, the conventional electroactive polymers, including silicone rubbers and acrylic polymers, have shown low dielectric constants (ca. < 4) because of their intrinsic limitation, although they have lower moduli (ca. < 1 MPa) than inorganics. To this end, we proposed the high dielectric PVDF terpolymer blends (PVTC-PTM) including poly(vinylidene fluoride-trifluoroethylene-chlorofluoro-ethylene) (P(VDF-TrFE-CFE), PVTC) as a matrix and micelle structured poly(3-hexylthiophene)-b-poly(methyl methacrylate) (P3HT-b-PMMA, PTM) as a conducting filler. The dielectric constant of PVTC-PTM dramatically increased up to 116.8 at 100 Hz despite adding only 2 wt% of the polymer-type filler (PTM). The compatibility and crystalline properties of the PVTC-PTM blends were examined by microscopic, thermal, and X-ray studies. The PVTC-PTM showed more compatible blends than those of the P3HT homopolymer filler (PT) and led to higher crystallinity and smaller crystal grain size relative to those of neat PVTC and PVTC with the PT filler (PVTC-PT). Those by the PVTC-PTM blends can beneficially affect the high-performance electromechanical properties compared to those by the neat PVTC and the PVTC-PT blend. The electromechanical strain of the PVTC-PTM with 2 wt% PTM (PVTC-PTM2) showed ca. 2-fold enhancement (0.44% transverse strain at 30 Vpp µm-1) relative to that of PVTC. We found that the more significant electromechanical performance of the PVTC-PTM blend than the PVTC was predominantly due to the electrostrictive force rather than electrostatic force. We believe that the acquired PVTC-PTM blends are great candidates to achieve the high-performance electromechanical strain and take all benefits derived from the all-organic system, including high electrical breakdown strength, processibility, dielectrics, and large strain, which are largely different from the organic-inorganic hybrid nanocomposite systems.
RESUMEN
Poly(vinylidene fluoride) (PVDF) is common polymer for electrospinning, however, its high hydrophobicity is a major drawback, which cause fouling. To introduce hydrophilicity and antibacterial activity, quaternary ammonium-functionalized amphiphilic diblock copolymers were synthesized and blended with a PVDF/graphene oxide (GO) solution, then, electrospun and coated with a hydrophilic polymer, poly(vinyl alcohol) (PVA). The amphiphilic block copolymer, consisting of a hydrophobic poly(methyl methacrylate) block and a hydrophilic poly[N,N-2-(dimethylamino)-ethyl methacrylate) block (PMMA-b-PDMAEMA), was synthesized. Polymeric quaternary ammonium with three different alkyl chain lengths (C2, C4, and C8) were successfully introduced to obtain as q-PMMA-b-PDMAEMA. The q-PMMA-b-PDMAEMA in the nanofiber matrix was confirmed by C=O bands (1734 cm-1) in the Fourier transform infrared spectra. Nano-sized spherical protuberances were distributed on the surface as revealed by field emission scanning and transmission electron microscopies. The PVDF/GO/q-PMMA-b-PDMAEMA@PVA nanofibers has superhydrophilic properties (water contact angle = 0-20°) and the pure water flux was generally improved by increasing the alkyl chain length. When introducing the longest alkyl chain (C8,OBC), the total fouling ratio was the lowest (49.99%) and the bacteria removal capacities after 60 min were the highest for both Escherichia coli (4.2 × 105 CFU/mg) and Staphylococcus aureus (6.1 × 105 CFU/mg) via growth inhibition and cytoplasmic membrane damage.
Asunto(s)
Antibacterianos , Materiales Biocompatibles Revestidos , Escherichia coli/crecimiento & desarrollo , Grafito , Nanofibras/química , Alcohol Polivinílico , Polivinilos , Staphylococcus aureus/crecimiento & desarrollo , Antibacterianos/química , Antibacterianos/farmacología , Materiales Biocompatibles Revestidos/química , Materiales Biocompatibles Revestidos/farmacología , Grafito/química , Grafito/farmacología , Interacciones Hidrofóbicas e Hidrofílicas , Alcohol Polivinílico/química , Alcohol Polivinílico/farmacología , Polivinilos/química , Polivinilos/farmacologíaRESUMEN
Development of highly active and durable electrocatalysts that can effectively electrocatalyze oxygen reduction reactions (ORR) still remains one important challenge for high-performance electrochemical conversion and storage applications such as fuel cells and metal-air batteries. Herein, we propose the combination of molybdenum-doped PdPt@Pt core-shell octahedra and the pyrene-functionalized poly(dimethylaminoethyl methacrylate)-b-poly[(ethylene glycol) methyl ether methacrylate] ionic block copolymer-functionalized reduced graphene oxide (Mo-PdPt@Pt/IG) to effectively augment the interfacial cohesion of both components using a tunable ex situ mixing strategy. The rationally designed Mo-PdPt@Pt core-shell octahedra have unique compositional benefits, including segregation of Mo atoms on the vertexes and edges of the octahedron and 2-3 shell layers of Pt atoms on a PdPt alloy core, which can provide highly active sites to the catalyst for ORR along with enhanced electrochemical stability. In addition, the ionic block copolymer functionalized graphene can facilitate intermolecular charge transfer and good stability of metal NPs, which arises from the ionic block copolymer interfacial layer. When the beneficial features of the Mo-PdPt@Pt and IG are combined, the Mo-PdPt@Pt/IG exhibits substantially enhanced activity and durability for ORR relative to those of commercial Pt/C. Notably, the Mo-PdPt@Pt/IG shows mass activity 31-fold higher than that of Pt/C and substantially maintains high activities after 10â¯000 cycles of intensive durability testing. The current study highlights the crucial strategies in designing the highly active and durable Pt-based octahedra and effective combination with functional graphene supports toward the synergetic effects on ORR.
RESUMEN
The design of amphiphilic polymer compatibilizers for solubility manipulation of CNT composites was systematically generalized in this study. Structurally tailored multiamphiphilic compatibilizer were designed and synthesized by applying simple, high-yield reactions. This multiamphiphilic compatibilizer was applied for noncovalent functionalization of CNTs as well as provided CNTs with outstanding dispersion stability, manipulation of solubility, and hybridization with Ag nanoparticles (NPs). With regard to the dispersion properties, superior records in maximum concentration (2.88-3.10 mg/mL in chloroform), and mass ratio of the compatibilizer for good CNT dispersion (36 wt %) were achieved by MWCNTs functionalized with a multiamphiphilic block copolymer compatibilizer. In particular, the solubility limitations of MWCNT dispersion in solvents ranging from toluene (nonpolar) to aqueous solution (polar) are surprisingly resolved by introducing this multiamphiphilic polymer compatibilizer. Furthermore, this polymer compatibilizer allowed the synthesis of the hybrid CNT nanocomposites with Ag nanoparticles by an in situ nucleation process. As such, the multiamphiphilic compatibilizer candidate as a new concept for the noncovalent functionalization of CNTs can extend their use for a wide range of applications.