The synaptonemal complex central region modulates crossover pathways and feedback control of meiotic double-strand break formation.

The synaptonemal complex (SC) is a proteinaceous structure that mediates homolog engagement and genetic recombination during meiosis. In budding yeast, Zip-Mer-Msh (ZMM) proteins promote crossover (CO) formation and initiate SC formation. During SC elongation, the SUMOylated SC component Ecm11 and the Ecm11-interacting protein Gmc2 facilitate the polymerization of Zip1, an SC central region component. Through physical recombination, cytological, and genetic analyses, we found that ecm11 and gmc2 mutants exhibit chromosome-specific defects in meiotic recombination. CO frequencies on a short chromosome (chromosome III) were reduced, whereas CO and non-crossover frequencies on a long chromosome (chromosome VII) were elevated. Further, in ecm11 and gmc2 mutants, more double-strand breaks (DSBs) were formed on a long chromosome during late prophase I, implying that the Ecm11-Gmc2 (EG) complex is involved in the homeostatic regulation of DSB formation. The EG complex may participate in joint molecule (JM) processing and/or double-Holliday junction resolution for ZMM-dependent CO-designated recombination. Absence of the EG complex ameliorated the JM-processing defect in zmm mutants, suggesting a role for the EG complex in suppressing ZMM-independent recombination. Our results suggest that the SC central region functions as a compartment for sequestering recombination-associated proteins to regulate meiosis specificity during recombination.

Ligand Effect in 1-Octanethiol Passivation of InP/ZnSe/ZnS Quantum Dots-Evidence of Incomplete Surface Passivation during Synthesis.

The lack of anionic carboxylate ligands on the surface of InP/ZnSe/ZnS quantum dots (QDs), where zinc carboxylate ligands can be converted to carboxylic acid or carboxylate ligands via proton transfer by 1-octanethiol, is demonstrated. The as-synthesized QDs initially have an under-coordinated vacancy surface, which is passivated by solvent ligands such as ethanol and acetone. Upon exposure of 1-octanethiol to the QD surface, 1-octanethiol effectively induces the surface binding of anionic carboxylate ligands (derived from zinc carboxylate ligands) by proton transfer, which consequently exchanges ethanol and acetone ligands that bind on the incomplete QD surface. These systematic chemical analyses, such as thermogravimetric analysis-mass spectrometry and proton nuclear magnetic resonance spectroscopy, directly show the interplay of surface ligands, and it associates with QD light-emitting diodes (QD-LEDs). It is believed that this better understanding can lead to industrially feasible QD-LEDs.

Activation of galactose utilization by the addition of glucose for the fermentation of agar hydrolysate using Lactobacillus brevis ATCC 14869.

OBJECTIVE: To investigate the application of carbon catabolite repression (CCR) relaxed Lactobacillus brevis ATCC 14869 in the utilization of agar hydrolysate to produce bioethanol and lactic acid through fermentation. RESULTS: As a single carbon source, galactose was not metabolized by L. brevis. However, L. brevis consumed galactose simultaneous to glucose and ceased cell growth after depletion of glucose. For complete use of galactose from agar hydrolysis, glucose need to be periodically replenished into the growth medium. Overall, L. brevis successfully used agar hydrolysate and produced 17.2 g/L of ethanol and 31.9 g/L of lactic acid. The maximum specific cell growth rate on galactose and glucose mixture was the same with the glucose-only medium at 0.12 h-1. The molar product yields from glucose for lactic acid and ethanol were 1.02 and 0.95 respectively, equal to values obtained from the simultaneous utilization of glucose and galactose. CONCLUSION: In contribution to the ongoing efforts to utilize marine biomass, the relaxed CCR in Lactobacillus brevis ATCC 14869 was herein exploited to produce bioethanol and lactic acid from red seaweed hydrolysates.

Transcriptome sequencing of the Antarctic vascular plant Deschampsia antarctica Desv. under abiotic stress.

Antarctic hairgrass (Deschampsia antarctica Desv.) is the only natural grass species in the maritime Antarctic. It has been studied as an extremophile that has successfully adapted to marginal land with the harshest environment for terrestrial plants. However, limited genetic research has focused on this species due to the lack of genomic resources. Here, we present the first de novo assembly of its transcriptome by massive parallel sequencing and its expression profile using D. antarctica grown under various stress conditions. Total sequence reads generated by pyrosequencing were assembled into 60,765 unigenes (28,177 contigs and 32,588 singletons). A total of 29,173 unique protein-coding genes were identified based on sequence similarities to known proteins. The combined results from all three stress conditions indicated differential expression of 3,110 genes. Quantitative reverse transcription polymerase chain reaction showed that several well-known stress-responsive genes encoding late embryogenesis abundant protein, dehydrin 1, and ice recrystallization inhibition protein were induced dramatically and that genes encoding U-box-domain-containing protein, electron transfer flavoprotein-ubiquinone, and F-box-containing protein were induced by abiotic stressors in a manner conserved with other plant species. We identified more than 2,000 simple sequence repeats that can be developed as functional molecular markers. This dataset is the most comprehensive transcriptome resource currently available for D. antarctica and is therefore expected to be an important foundation for future genetic studies of grasses and extremophiles.

miRGator v2.0: an integrated system for functional investigation of microRNAs.

miRGator is an integrated database of microRNA (miRNA)-associated gene expression, target prediction, disease association and genomic annotation, which aims to facilitate functional investigation of miRNAs. The recent version of miRGator v2.0 contains information about (i) human miRNA expression profiles under various experimental conditions, (ii) paired expression profiles of both mRNAs and miRNAs, (iii) gene expression profiles under miRNA-perturbation (e.g. miRNA knockout and overexpression), (iv) known/predicted miRNA targets and (v) miRNA-disease associations. In total, >8000 miRNA expression profiles, ∼300 miRNA-perturbed gene expression profiles and ∼2000 mRNA expression profiles are compiled with manually curated annotations on disease, tissue type and perturbation. By integrating these data sets, a series of novel associations (miRNA-miRNA, miRNA-disease and miRNA-target) is extracted via shared features. For example, differentially expressed genes (DEGs) after miRNA knockout were systematically compared against miRNA targets. Likewise, differentially expressed miRNAs (DEmiRs) were compared with disease-associated miRNAs. Additionally, miRNA expression and disease-phenotype profiles revealed miRNA pairs whose expression was regulated in parallel in various experimental and disease conditions. Complex associations are readily accessible using an interactive network visualization interface. The miRGator v2.0 serves as a reference database to investigate miRNA expression and function (http://miRGator.kobic.re.kr).

A Method for Physical Analysis of Recombination Intermediates in Saccharomyces cerevisiae.

Meiosis is a process through which diploid cells divide into haploid cells, thus promoting genetic diversity. This diversity arises from the formation of genetic crossovers (COs) that repair DNA double-strand breaks (DSBs), through homologous recombination (HR). Deficiencies in HR can lead to chromosomal abnormality resulting from chromosomal nondisjunction, and genetic disorders. Therefore, investigating the mechanisms underlying effective HR is crucial for reducing genome instability. Budding yeast serves as an ideal model for studying HR mechanisms due to its amenability to gene modifications and the ease of inducing synchronized meiosis to yield four spores. During meiosis, at the DNA level, programmed DSBs are repaired as COs or non-crossovers (NCOs) through structural alterations in the nascent D-loop, involving single-end invasions (SEIs) and double-Holliday junctions (dHJs). This repair occurs using homologous templates rather than sister templates. This protocol, using Southern blotting, allows for the analysis and monitoring of changes in DNA structures in the recombination process. One-dimensional (1D) gel electrophoresis is employed to detect DSBs, COs, and NCOs, while two-dimensional (2D) gel electrophoresis is utilized to identify joint molecules (JMs). Therefore, physical analysis is considered the most effective method for investigating the HR mechanism. Our protocol provides more comprehensive information than previous reports by introducing conditions for obtaining a greater number of cells from synchronized yeast and a method that can analyze not only meiotic/mitotic recombination but also mitotic replication.

Enhanced Electroluminescence via a Nanohybrid Material Consisting of Aromatic Ligand-Modified InP Quantum Dots and an Electron-Blocking Polymer as the Single Active Layer in Quantum Dot-LEDs.

Electron overcharge causes rapid luminescence quenching in the quantum dot (QD) emission layer in QD light-emitting diodes (QD-LEDs), resulting in low device performance. In this paper we describe the application of different aromatic thiol ligands and their influence on device performance as well as their behavior in combination with an electron blocking material (EBM). The three different ligands, 1-octanethiol (OcSH), thiophenol (TP), and phenylbutan-1-thiol (PBSH), were introduced on to InP/ZnSe/ZnS QDs referred to as QD-OcSH, QD-TP, and QD-PBSH. PBSH is in particular applied as a ligand to improve QD solubility and to enhance the charge transport properties synergistically with EBM probably via π-π interaction. We synthesized poly-[N,N-bis[4-(carbazolyl)phenyl]-4-vinylaniline] (PBCTA) and utilized it as an EBM to alleviate excess electrons in the active layer in QD-LEDs. The comparison of the three QD systems in an inverted device structure without the application of PBCTA as an EBM shows the highest efficiency for QD-PBSH. Moreover, when PBCTA is introduced as an EBM in the active layer in combination with QD-PBSH in a conventional device structure, the current efficiency shows a twofold increase compared to the reference device without EBM. These results strongly confirm the role of PBCTA as an EBM that effectively alleviates excess electrons in the active layer, leading to higher device efficiency.

Maternal exposure to polystyrene nanoplastics causes brain abnormalities in progeny.

As global plastic production continues to grow, microplastics released from a massive quantity of plastic wastes have become a critical environmental concern. These microplastic particles are found in a wide range of living organisms in a diverse array of ecosystems. In this study, we investigated the biological effects of polystyrene nanoplastic (PSNP) on development of the central nervous system using cultured neural stem cells (NSCs) and mice exposed to PSNP during developmental stages. Our study demonstrates that maternal administration of PSNP during gestation and lactating periods altered the functioning of NSCs, neural cell compositions, and brain histology in progeny. Similarly, PSNP-induced molecular and functional defects were also observed in cultured NSCs in vitro. Finally, we show that the abnormal brain development caused by exposure to high concentrations of PSNP results in neurophysiological and cognitive deficits in a gender-specific manner. Our data demonstrate the possibility that exposure to high amounts of PSNP may increase the risk of neurodevelopmental defects.

Development of methods for determining free fatty acid contents in red colored oils.

Buah merah oil and red palm oil are red colored and unrefined edible oils. Because of this color characteristic, measuring acid value by titration method can be uncertain and subjective, so more accurate and objective methods are needed. Gas chromatography-flame ionization detector (GC-FID) and high-performance liquid chromatography-evaporative light scattering detector (HPLC-ELSD) methods were developed to determine acid value in 3 buah merah oils and 1 red palm oil by measuring free fatty acid contents. The acid value was high in the order of titration > GC-FID > HPLC-ELSD in all samples. GC-FID method showed accurate and reliable results, whereas HPLC-ELSD showed rough data partly due to the non-linear standard curve and high limit of detection. Difference in acid value between titration method and GC-FID might be due to unrefined components that reacted with KOH titration solution. GC-FID can be used measuring free fatty acid contents in red colored oils. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s10068-021-00964-2.

Dioleylphosphatidylcholine increases the antioxidant properties of ascorbyl palmitate in bulk oils compared to other hydrophilic and lipophilic antioxidants.

Effects of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and moisture on the solubility of hydrophilic and lipophilic antioxidants were evaluated in medium-chain triacylglycerol (MCT) by 2,2-diphenyl-1-picrylhydrazyl (DPPH) reactivity. Next, we assessed the oxidative stability of antioxidant-containing corn oil depending on the presence of DOPC. The critical micelle concentration (CMC) of DOPC decreased when the moisture content was increased from 300 to 495 mg/kg oil and gradually increased when the moisture was further increased to 2122 mg/kg oil. As the DOPC concentration increased, the DPPH reactivity of ascorbyl palmitate in the control MCT increased by 10.23-fold, whereas that of the ascorbic acid and α-tocopherol was slightly affected both by the DOPC and moisture content. Presence of DOPC significantly increased the oxidative stability of ascorbyl palmitate-containing corn oil (p < 0.05), whereas these synergistic antioxidant effects were not observed in ascorbic acid-or α-tocopherol-containing corn oil. In conclusion, DOPC displays a synergistic antioxidant effect with ascorbyl palmitate in bulk oil.

Metal Sulfide Nanoparticle Synthesis with Ionic Liquids - State of the Art and Future Perspectives.

Metal sulfides are among the most promising materials for a wide variety of technologically relevant applications ranging from energy to environment and beyond. Incidentally, ionic liquids (ILs) have been among the top research subjects for the same applications and also for inorganic materials synthesis. As a result, the exploitation of the peculiar properties of ILs for metal sulfide synthesis could provide attractive new avenues for the generation of new, highly specific metal sulfides for numerous applications. This article therefore describes current developments in metal sulfide nanoparticle synthesis as exemplified by a number of highlight examples. Moreover, the article demonstrates how ILs have been used in metal sulfide synthesis and discusses the benefits of using ILs over more traditional approaches. Finally, the article demonstrates some technological challenges and how ILs could be used to further advance the production and specific property engineering of metal sulfide nanomaterials, again based on a number of selected examples.

Effects of Ultra-high doserate FLASH Irradiation on the Tumor Microenvironment in Lewis Lung Carcinoma: Role of Myosin Light Chain.

PURPOSE: To investigate whether the vascular collapse in tumors by conventional dose rate (CONV) irradiation (IR) would also occur by the ultra-high dose rate FLASH IR. METHODS AND MATERIALS: Lewis lung carcinoma (LLC) cells were subcutaneously implanted in mice. This was followed by CONV or FLASH IR at 15 Gy. Tumors were harvested at 6 or 48 hours after IR and stained for CD31, phosphorylated myosin light chain (p-MLC), γH2AX (a surrogate marker for DNA double strand break), intracellular reactive oxygen species (ROS), or immune cells such as myeloid and CD8α T cells. Cell lines were irradiated with CONV IR for Western blot analyses. ML-7 was intraperitoneally administered daily to LLC-bearing mice for 7 days before 15 Gy CONV IR. Tumors were similarly harvested and analyzed. RESULTS: By immunostaining, we observed that CONV IR at 6 hours resulted in constricted vessel morphology, increased expression of p-MLC, and much higher numbers of γH2AX-positive cells in tumors, which were not observed with FLASH IR. Mechanistically, MLC activation by ROS is unlikely, because FLASH IR produced significantly more ROS than CONV IR in tumors. In vitro studies demonstrated that ML-7, an inhibitor of MLC kinase, abrogated IR-induced γH2AX formation and disappearance kinetics. Lastly, we observed that CONV IR when combined with ML-7 produced some effects similar to FLASH IR, including reduction in the vasculature collapse, fewer γH2AX-positive cells, and increased immune cell influx to the tumors. CONCLUSIONS: FLASH IR produced novel changes in the tumor microenvironment that were not observed with CONV IR. We believe that MLC activation in tumors may be responsible for some of the microenvironmental changes differentially regulated between CONV and FLASH IR.

Comparative Whole Cell Proteomics of Listeria monocytogenes at Different Growth Temperatures.

Listeria monocytogenes is a gram-positive, facultative anaerobe food pathogen responsible for the listeriosis that mostly occurs during the low-temperature storage of a cold cut or dairy products. To understand the systemic response to a wide range of growth temperatures, L. monocytogenes were cultivated at a different temperature from 10°C to 42°C, then whole cell proteomic analysis has been performed both exponential and stationary cells. The specific growth rate increased proportionally with the increase in growth temperature. The maximum growth rate was observed at 37°C and was maintained at 42°C. Global protein expression profiles mainly depended on the growth temperatures showing similar clusters between exponential and stationary phases. Expressed proteins were categorized by their belonging metabolic systems and then, evaluated the change of expression level in regard to the growth temperature and stages. DnaK, GroEL, GroES, GrpE, and CspB, which were the heat&cold shock response proteins, increased their expression with increasing the growth temperatures. In particular, GroES and CspB were expressed more than 100-fold than at low temperatures during the exponential phase. Meanwhile, CspL, another cold shock protein, overexpressed at a low temperature then exponentially decreased its expression to 65-folds. Chemotaxis protein CheV and flagella proteins were highly expressed at low temperatures and stationary phases. Housekeeping proteins maintained their expression levels constant regardless of growth temperature or growth phases. Most of the growth related proteins, which include central carbon catabolic enzymes, were highly expressed at 30°C then decreased sharply at high growth temperatures.

Mec1 Modulates Interhomolog Crossover and Interplays with Tel1 at Post Double-Strand Break Stages.

During meiosis I, programmed DNA double-strand breaks (DSBs) occur to promote chromosome pairing and recombination between homologs. In Saccharomyces cerevisiae, Mec1 and Tel1, the orthologs of human ATR and ATM, respectively, regulate events upstream of the cell cycle checkpoint to initiate DNA repair. Tel1ATM and Mec1ATR are required for phosphorylating various meiotic proteins during recombination. This study aimed to investigate the role of Tel1ATM and Mec1ATR in meiotic prophase via physical analysis of recombination. Tel1ATM cooperated with Mec1ATR to mediate DSB-to-single end invasion transition, but negatively regulated DSB formation. Furthermore, Mec1ATR was required for the formation of interhomolog joint molecules from early prophase, thus establishing a recombination partner choice. Moreover, Mec1ATR specifically promoted crossover-fated DSB repair. Together, these results suggest that Tel1ATM and Mec1ATR function redundantly or independently in all post-DSB stages.

Development of a 3D scanning method to discriminate blocks of Octopus minor with surplus water gain.

A 3D scanning method was developed to differentiate Octopus minor blocks which had surplus water to increase weight of O. minor. Effects of soaking time (0.5, 1 and 3 h) and apparent density of O. minor were determined using the number of O. minor in a block (4, 5, 6, and 7). A 0.5, 1, and 3 h soaking time increased O. minor weight by 11.85, 16.02, and 24.53%, respectively. Apparent density of non-weight gained O. minor blocks was significantly higher than those of 3 h soaked samples (p < 0.05). A 3D scanning method had limited ability to differentiate 1 h soaked and non-soaked samples, whereas it had high potential to discriminate 3 h soaked samples. Blind test using 25 blocks of O. minor showed that 3D scanning method evaluated 88% of prediction percentage. The total time of 3D scanning took <30 min for one block with a relatively high precision.

Why have serine/threonine/tyrosine kinases been evolutionarily selected in eukaryotic signaling cascades?

The signal transduction systems of eukaryotes are different from those of prokaryotes with respect to their structures and mechanisms. The main signal transduction system of prokaryotes called the two-component system (TCS) is a one-step phosphorelay system composed of a histidine kinase (HK) while the central signal transduction system of eukaryotes called the mitogen-activated protein kinase (MAPK) cascade system (MCS) is a multi-step phosphorelay system composed of serine/threonine/tyrosine kinases (STYKs). The two signal transduction systems are also different in their transphosphorylation mechanisms. HK in the TCS transfers its own phosphate group to the response regulator protein while STYKs in the MCS phosphorylate other proteins using ATP. We were intrigued by the different dynamics resulting from such differences and wondered why STYKs instead of HKs have been evolutionarily selected in eukaryotic signaling cascades. In this paper, we compared the dynamical characteristics of two mathematical models which reflect such differences between the TCS and the MCS, and found that STYKs are more appropriate for cascade structures in eukaryotic signal transduction than HK with respect to the duration and settling time of response signals.

Coupled positive feedbacks provoke slow induction plus fast switching in apoptosis.

Apoptosis is a form of a programmed cell death for multicellular organisms to remove unwanted or damaged cells. This critical choice of cellular fate is an all-or-none process, but its dynamics remains unraveled. The switch-like apoptotic decision has to be reliable, and once a pro-apoptotic fate is determined it requires fast and irreversible execution. One of the key regulators in apoptosis is caspase-3. Interestingly, activated caspase-3 quickly executes apoptosis, but it takes considerable time to activate it. Here, we have analyzed this "slow induction plus fast switching" mechanism of caspase-3 through mathematical modeling and computational simulation. First, we have shown that two positive feedbacks, composed of caspase-8 and XIAP, are essential for the "slow induction plus fast switching" behavior of caspase-3. Second, we have found that XIAP in the feedback loops primarily regulates induction time of caspase-3. In many cancer cells activation of caspase-3 is suppressed. Our results suggest that reinforcement of the positive feedback by XIAP, which relieves XIAP-mediated caspase-3 inhibition, might favor a pro-apoptotic cellular fate.

Unraveling the functional interaction structure of a biomolecular network through alternate perturbation of initial conditions.

Various approaches attempting to infer the functional interaction structure of a hidden biomolecular network from experimental time-series measurements have been developed; however, due to both experimental limitations and methodological complexities, a large majority of these approaches have been unsuccessful. In particular, with respect to the elucidation of such networks, there are (i) a dimensionality problem: too many network nodes with too few available sampling points, (ii) a computational complexity problem: exponential complexity if a priori information is unavailable for regulatory nodes, and (iii) an experimental measurement problem: no guidelines for an appropriate experimental design for distinguishing direct and indirect influences among network nodes. Here, we sought to develop a new methodology capable of identifying the correct functional interaction structure with only a few sampling points through relatively simple computations. We also attempted to provide guidelines for an experimental design capable of supporting this methodology by taking proper measurements of the direct influences among the network nodes. In the present study, we considered an experiment where measurements were taken at two sampling time points with alternate perturbation (up-regulation or down-regulation) of initial conditions while keeping the same initial conditions for unperturbed network nodes, and propose a new method of identifying the functional interaction structure from such measurements. The proposed method is able to avoid the dimensionality problem caused by the practically limited number of sampling time points, and does not suffer from the computational complexity problem, as it only uses a simple algebra based on the Mean Value Theorem (see Supplementary mathematical descriptions) without any other complicated computation. In addition, we provide a detailed guideline for an experimental design that can take proper measurements of the direct influences among the network nodes through perturbation of initial conditions. The proposed method is particularly useful for cases investigating the local interaction structure around a specific network node of interest. An example, based on simulated data, is provided to illustrate the proposed method.

Oxidative Stability in Oil-in-Water Emulsions with Quercetin or Rutin Under Iron Catalysis or Riboflavin Photosensitization.

The effects of quercetin and rutin on the oxidative stability of oil-in-water (O/W) emulsions were tested under riboflavin (RF) photosensitization in the presence or absence of FeCl2 . The degree of oxidation in O/W emulsions was determined by headspace oxygen content, conjugated dienes, and lipid hydroperoxides. Quercetin chelated more metal than did rutin in iron catalyzed O/W emulsions. Generally, 0.1 mM quercetin and rutin was oxidative while 0.5 and 1.0 mM quercetin and rutin was antioxidative in O/W emulsions under RF photosensitization. Depending on the analysis method, the antioxidants had different strengths. The antioxidative or oxidative properties of quercetin and rutin vary in O/W emulsions and depend the quercetin and rutin concentrations and oxidative forces like transition metals, RF photosensitization, or a combination thereof.

Inferring biomolecular regulatory networks from phase portraits of time-series expression profiles.

Reverse engineering of biomolecular regulatory networks such as gene regulatory networks, protein interaction networks, and metabolic networks has received an increasing attention as more high-throughput time-series measurements become available. In spite of various approaches developed from this motivation, it still remains as a challenging subject to develop a new reverse engineering scheme that can effectively uncover the functional interaction structure of a biomolecular network from given time-series expression profiles (TSEPs). We propose a new reverse engineering scheme that makes use of phase portraits constructed by projection of every two TSEPs into respective phase planes. We introduce two measures of a slope index (SI) and a winding index (WI) to quantify the interaction properties embedded in the phase portrait. Based on the SI and WI, we can reconstruct the functional interaction network in a very efficient and systematic way with better inference results compared to previous approaches. By using the SI, we can also estimate the time-lag accompanied with the interaction between molecular components of a network.