Multistability and hysteresis in states of oral microbiota: Is it impacting the dental clinical cohort studies?

INTRODUCTION: Microbiome from a "healthy cohort" is used as a reference for comparison to cases and intervention. However, the studies with cohort-based clinical research have not sufficiently accounted for the multistability in oral microbial community. The screening is limited to phenotypic features with marked variations in microbial genomic markers. Herein, we aimed to assess the stability of the oral microbiome across time from an intervention-free "healthy" cohort. METHODS: We obtained 33 supragingival samples of 11 healthy participants from the biobank. For each participant, we processed one sample as baseline (T0) and two samples spaced at 1-month (T1) and 3-month (T2) intervals for 16S ribosomal RNA gene sequencing analysis. RESULTS: We observed that taxonomic profiling had a similar pattern of dominant genera, namely, Rothia, Prevotella, and Hemophilus, at all time points. Shannon diversity revealed a significant increase from T0 (p < .05). Bray Curtis dissimilarity was significant (R = -.02, p < .01) within the cohort at each time point. Community stability had negative correlation to synchrony (r = -.739; p = .009) and variance (r = -.605; p = .048) of the species. Clustering revealed marked differences in the grouping patterns between the three time points. For all time points, the clusters presented a substantially dissimilar set of differentially abundant taxonomic and functional biomarkers. CONCLUSION: Our observations indicate towards the presence of multistable states within the oral microbiome in an intervention-free healthy cohort. For a conclusive and meaningful long-term reference, dental clinical research should account for multistability in the personalized therapy approach to improve the identification and classification of reliable markers.

Etiology and Clinical Characteristics of Community-Acquired Pneumonia in Korean Children During the Pre-COVID-19 Period, 2015-2020.

BACKGROUND: There have been many epidemiologic studies on community-acquired pneumonia (CAP) among children, most of which had substantial limitations. This study investigated the etiologic distribution and clinical characteristics of CAP in Korean children for 5 years before the coronavirus disease 2019 (COVID-19) pandemic. METHODS: A retrospective analysis of children hospitalized for CAP at 4 referral hospitals during 2015-2020 was performed. Cases in which bronchiolitis was suspected or pulmonary infiltration was not evident on chest radiography (CXR) were excluded. Viruses and atypical bacteria were defined as detected when positive in the polymerase chain reaction test performed for respiratory specimens. Serologic testing result for Mycoplasma pneumoniae was incorporated with strict interpretation. Pyogenic bacteria were included only when cultured in blood, pleural fluid, or bronchoalveolar lavage, but those cultured in endotracheal aspirate or sputum when the case was clinically evident bacterial pneumonia were also included. RESULTS: A total of 2,864 cases of suspected pneumonia were selected by diagnosis code and CXR findings. Medical chart and CXR review excluded nosocomial pneumonia and cases without evident infiltration, resulting in 517 (18.1%) CAP cases among 489 children. Regarding clinical symptoms, high fever was present in 59.4% and dyspnea in 19.9% of cases. Respiratory support was required for 29.2% of patients, including mechanical ventilation for 3.9%. Pathogens were detected in 49.9% of cases, with viruses in 32.3%, atypical bacteria in 17.8%, and pyogenic bacteria in 2.3% of cases. As single pathogens, M. pneumoniae (16.8%) and respiratory syncytial virus (RSV, 13.7%) were the most common. Parenteral ß-lactam and macrolide antibiotics were administered in 81.6% and 50.7% of cases, respectively. A total of 12 (2.3%) cases resulted in poor outcomes, including 3 deaths. CONCLUSION: M. pneumoniae and RSV were the most commonly detected pathogens of pediatric CAP, which was selected by strict clinical and radiologic criteria. It is necessary to carefully decide whether to use parenteral antibiotics based on the epidemiology and clinical features of CAP in children.

Stability of vertical dimension following total arch intrusion.

BACKGROUND: The purpose of this study is to evaluate stability of vertical dimension following total arch intrusion using miniscrews by measuring the change during treatment and relapse amount after more than one year of retention. METHODS: Thirty patients (6 men, 24 women) were included in this study. Lateral cephalographs were taken with conventional radiography at the start of treatment (T0), after treatment (T1), and at least one year after treatment (T2). The evaluation was performed by measuring changes of selected parameters during treatment and the extent of relapse after more than one year. RESULTS: During total arch intrusion treatment (T1-T0), anterior and posterior teeth intruded significantly. The mean vertical distance between the maxillary posterior teeth and palatal plane was reduced by 2.30 mm (P < 0.001). The mean vertical distance between the maxillary anterior teeth and palatal plane was reduced by 2.04 mm (P < 0.001). The anterior facial height was also reduced by 2.70 mm (P < 0.001). During retention period (T2-T1), the vertical distance between the maxillary anterior teeth and the palatal plane significantly increased by 0.92 mm (P < 0.001). The anterior facial height increased by 0.81 mm (P < 0.01). CONCLUSIONS: Anterior facial height significantly decreases after treatment. During retention period, relapse of AFH and maxillary anterior teeth observed. There was no correlation between initial amount of AFH, mandibular plane angle, or SNPog and posttreatment AFH relapse. However, there was a significant correlation between the amount of intrusion of anterior and posterior teeth achieved by the treatment and the extent of relapse.

The success and effectiveness of miniscrew-assisted rapid palatal expansion are age- and sex-dependent.

OBJECTIVES: This study aimed to assess the success rate and the amount of suture separation after the miniscrew-assisted rapid palatal expansion (MARPE) procedure in relation to the chronological age and sex of the patients. MATERIALS AND METHODS: The periapical radiographs of 215 subjects (95 male; 120 female; range, 6-60 years) who had undergone MARPE treatment were retrospectively analyzed. The success of suture separation was determined and, in suture-separated subjects, the amount of suture separation was evaluated by suture separation ratio calculated from the periapical radiograph obtained after active expansion. Association tests were performed using linear-by-linear association, the Jonckheere-Terpstra test, Fisher's exact test, and the Mann-Whitney U test, and linear regression models were also developed. RESULTS: The success rate of suture separation was 61.05% in male, 94.17% in female, and 79.53% in both sexes. There was a statistically significant association between older age and suture nonseparation in male (p < 0.001), but not in female (p = 0.221). In suture-separated subjects, there was a statistically significant trend toward a low amount of suture separation with older age subgroups in both sexes (p < 0.001); however, there was no statistically significant difference in the amount of suture separation between male and female in all age subgroups. CONCLUSIONS: Older patients treated with MARPE, particularly in male, may have a reduced likelihood of both success in suture separation and sufficient basal bone expansion. CLINICAL RELEVANCE: This study demonstrates that clinicians should consider that the success rate of MARPE and the amount of suture separation may depend on chronological age and sex.

Accuracy of 3-dimensional printed bracket transfer tray using an in-office indirect bonding system.

INTRODUCTION: In this study, we aimed to evaluate and compare the bracket positioning accuracy of the indirect bonding (IDB) transfer tray fabricated in-clinic using the tray printing (TP) and marker-model printing methods (MP). METHODS: The TP group was further divided into 2 groups (single-tray printing [STP] and multiple-tray printing [MTP]) depending on the presence of a tray split created using the 3-dimensional (3D) software. Five duplicated plaster models were used for each of the 3 experimental groups, and a total of 180 artificial teeth, except the second molar, were evaluated in the experiment. The dental model was scanned using a model scanner (E3; 3Shape Dental Systems, Copenhagen, Denmark). Virtual brackets were placed on facial axis points, and the IDB trays were designed and fabricated using a 3D printer (VIDA; EnvisionTEC, Mich). The accuracy of bracket positioning was evaluated by comparing the planned bracket positions and the actual bracket positions using 3D analysis on inspection software. The main effects and first-order interaction effects were analyzed together by analysis for the analysis of variance. RESULTS: The mean distance and height errors were significantly lower in the STP group than those in the MP and MTP groups (P <0.05). The mean distance error was 0.06 mm in the STP group and 0.09 mm in the MP and MTP groups. The mean height error was 0.10 mm in the STP group and 0.15 mm and 0.18 mm in MP and MTP groups, respectively. However, no significant differences were observed in the angular errors among the 3 groups. CONCLUSIONS: The in-office-fabricated IDB system with computer-aided design and 3D printer is clinically applicable after considering the linear and angular errors. We recommend IDB trays fabricated using the STP method owing to the lower frequency of bracket positioning errors and ease of fabrication.

Skeletal and alveolar changes in conventional rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE): a prospective randomized clinical trial using low-dose CBCT.

BACKGROUND: This prospective randomized clinical trial aimed to evaluate the immediate and short-term skeletal, dentoalveolar, and periodontal effects of rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE) in adolescent and young adult patients. METHODS: This study followed a two-arm, parallel, randomized clinical trial design that recruited patients with transverse maxillary deficiency in a 1:1 allocation ratio. Forty patients (14 men and 26 women) requiring maxillary expansion were randomly allocated to the RPE (n = 20, age = 14.0 ± 4.5) or MARPE (n = 20, age = 14.1 ± 4.2) groups. The assignment was performed via computer-generated block randomization, with a block size of four. Upon identical (35 turns) amount of expansion, low-dose cone-beam computed tomography images were taken before treatment (T0), immediately after expansion (T1), and after a 3-month consolidation period (T2). The primary outcome of this study comprised the assessment of midpalatal suture separation. Secondary outcomes included, skeletal, dentoalveolar, and periodontal measurements, which were performed at each time point. RESULTS: The frequency of midpalatal suture separation was 90% (18/20) and 95% (19/20) for the RPE and MARPE groups, respectively. A greater increase in nasal width in the molar region (M-NW) and greater palatine foramen (GPF) was observed immediately after the expansion (T1-T0) and consolidation periods (T2-T0) in the MARPE group compared to the RPE group (P < 0.05). The MARPE and RPE groups showed similar dentoalveolar changes except for the maxillary width (PM-MW, M-MW). The MARPE group presented greater bilateral first premolar (PM-MW) and molar (M-MW) maxillary width in relation to the RPE group (P < 0.05). Through the expansion and consolidation periods (T2-T0), lesser buccal displacement of the anchor teeth was observed in the MARPE group (PM-BBPT, PM-PBPT, M-BBPT [mesial and distal roots], and M-PBPT)( P < 0.05). CONCLUSIONS: Midpalatal suture separation was observed in 90% and 95% of patients in the RPE and MARPE groups, respectively. Both RPE and MARPE groups exhibited significant triangular basal bone expansion and skeletal relapse during consolidation. Under identical amounts of expansion, the MARPE group showed lower decrease in the skeletal, dentoalveolar and periodontal variables after consolidation. The reinforcement of RPE with miniscrews contributes to the maintenance of the basal bone during consolidation period. Trial registration WHO Institutional Clinical Trials Registry Platform (IRB No. KCT0006871 / Registration date 27/12/2021).

Clinical applications of miniscrews that broaden the scope of non-surgical orthodontic treatment.

Previously, in the case of malocclusion owing to skeletal discrepancy in adults, the amount of tooth movement was limited since there was no reliable skeletal anchorage device. The only way to treat this case was by repositioning the maxilla and mandible via orthognathic surgery, but most patients are reluctant to undergo surgery owing to the risk and expenses incurred. However, with the current introduction and use of miniscrews as temporary anchorage devices, the entire dental arch can be relocated to a target position without surgery, thus broadening the scope of non-surgical orthodontic treatment compared to the past. For a non-surgical approach to improve skeletal discrepancy, anteroposterior, vertical and transverse displacements of the dental arch are necessary. In this case, the localization of the centre of resistance of the whole arch must precede the appliance design with an appropriate biomechanical design. Especially, in the transverse dimension, the envelope of discrepancy is reportedly narrow, and the tooth movement must accompany the orthopaedic correction involving the midpalatal suture expansion. Recently, in adults with transverse maxillomandibular discrepancy, miniscrew-assisted rapid palatal expansion (MARPE) can be performed. Moreover, compared to surgically assisted rapid palatal expansion, MARPE reduces the cost to the patient and achieves clinically acceptable stable maxillary expansion. In this article, we will discuss the role of total arch movement and MARPE in widening the scope of non-surgical orthodontic treatment, despite the inherent limitations of miniscrews' mechanical aspects.

Tissue-specific biomarkers in gingival crevicular fluid are correlated with external root resorption caused by constant mechanical load: an in vivo study.

OBJECTIVES: This study investigated the association of changes in cementum protein-1 (CEMP-1), dentine phosphoprotein (DPP), and c-terminal cross-linked telopeptide of type I collagen (CTX-I) levels in human gingival crevicular fluid (GCF) under constant load with external root resorption volume and amount of tooth movement. MATERIALS AND METHODS: In total, 11 healthy adult patients (mean age, 23.5 years [range, 18.3-37.7]; four men and seven women) were enrolled. GCF samples were obtained from premolars at T0, T1 (1 day), T2 (1 week), T3 (2 weeks), T4 (4 weeks), and T5 (8 weeks) under constant 100-gm buccal tipping force. Opposite premolars were used as controls. Teeth were extracted at T5, followed by quantification of external root resorption volume and histological analysis. RESULTS: In the test group, T5/T0 ratios of CEMP-1 and DPP levels, differential CEMP-1 levels between T5 and T0, and differential DPP levels between T2 and T0 correlated positively with root resorption volume (r = 0.734, 0.730, 0.627, and 0.612, respectively, all p < 0.05). CEMP-1 levels at T0 and T3 correlated negatively with root resorption volume (r = -0.603 and -0.706; all p < 0.05). CTX-I levels at T5 correlated positively with the amount of tooth movement (r = 0.848, p < 0.01). CONCLUSIONS: Alterations in CEMP-1 and DPP levels in human GCF at specific timepoints during orthodontic treatment may be associated with different degrees of external root resorption. CLINICAL RELEVANCE: This study demonstrates that changes in the levels of tissue-specific biomarkers in GCF may facilitate early detection of external root resorption during orthodontic tooth movement.

Durable Oral Biofilm Resistance of 3D-Printed Dental Base Polymers Containing Zwitterionic Materials.

Poly(methyl methacralyate) (PMMA) has long been used in dentistry as a base polymer for dentures, and it is recently being used for the 3D printing of dental materials. Despite its many advantages, its susceptibility to microbial colonization remains to be overcome. In this study, the interface between 3D-printed PMMA specimens and oral salivary biofilm was studied following the addition of zwitterionic materials, 2-methacryloyloxyethyl phosphorylcholine (MPC) or sulfobetaine methacrylate (SB). A significant reduction in bacterial and biofilm adhesions was observed following the addition of MPC or SB, owing to their protein-repellent properties, and there were no significant differences between the two test materials. Although the mechanical properties of the tested materials were degraded, the statistical value of the reduction was minimal and all the properties fulfilled the requirements set by the International Standard, ISO 20795-2. Additionally, both the test materials maintained their resistance to biofilm when subjected to hydrothermal fatigue, with no further deterioration of the mechanical properties. Thus, novel 3D-printable PMMA incorporated with MPC or SB shows durable oral salivary biofilm resistance with maintenance of the physical and mechanical properties.

Evaluation of success rate and biomechanical stability of ultraviolet-photofunctionalized miniscrews with short lengths.

INTRODUCTION: The aim of this research was to verify that ultraviolet light (UV)-photofunctionalization improves the success rate and biomechanical stability of miniscrews regardless of length, and to evaluate the comparability of biomechanical stability between UV-photofunctionalized miniscrews with short lengths and untreated miniscrews with conventional lengths. METHODS: Eight male beagles (age, 12-15 months; weight, 10-13 kg) received a total of 64 miniscrews, including 7-mm and 4-mm untreated and UV-photofunctionalized, acid-etched miniscrews with the use of a random block design. The cumulative success rates were examined in all studied groups. The insertion and removal torques and screw mobility were measured. Microcomputed tomographic scans and histomorphometric analyses were performed at 8 weeks postoperatively. RESULTS: The success rates of 7-mm UV-untreated and UV-photofunctionalized miniscrews were 87.5% and 100%, respectively, vs 43.8% for the 4-mm UV-untreated and 4-mm UV-photofunctionalized miniscrews. The rates were significantly different in accordance with the length (P <0.001). There were no differences in the insertion and removal torque and screw mobility between groups according to the length or UV treatment. However, the 4-mm UV-untreated miniscrews yielded a mean bone area ratio of 6.35 ± 7.43%, whereas the 7-mm UV-photofunctionalized miniscrew yielded a mean ratio of 32.17 ± 8.34% (P = 0.037). CONCLUSIONS: The UV-photofunctionalization significantly increased the biomechanical stability and led to increased bone and miniscrew contact area in dogs with miniscrews of the same length. However, the most important factor that affected the success rate of the miniscrew was the length.

Differences in soft-tissue thickness changes after bimaxillary surgery between patients with vertically high angle and normal angle.

INTRODUCTION: We evaluated soft-tissue thickness changes after bimaxillary surgery according to vertical facial patterns in patients with skeletal Class III malocclusion with mandibular prognathism. METHODS: Forty-three Korean patients (16 men and 27 women; mean age, 22.6 ± 4.1 years) with skeletal Class III malocclusion who underwent bimaxillary surgery were divided into 2 groups: normal-angle group (N group) and high-angle group (H group), on the basis of the presurgical angle of the mandibular plane relative to the sella-nasion plane (SN-MP). Changes in hard-tissue landmarks and soft-tissue thickness before and after surgery were analyzed from reconstructed 3-dimensional cone-beam computed tomography images. Postoperative soft-tissue thickness in both groups was compared with that in 40 patients with normal skeletal Class I malocclusion in the reference group. RESULTS: Group N (27°-37°) and group H (>37°) did not differ significantly in terms of sex and age before surgery. Preoperative pogonion (Pog) thickness was significantly less in group H (9.7 ± 1.6 mm) than in group N (10.8 ± 1.9 mm) (P = 0.042). Adjusted multiple linear regression analysis showed a weak positive linear relationship between the SN-MP before surgery and soft-tissue Pog thickness change (R2 of 0.361; P = 0.001) after surgery, but the area below the lower lips was not completely normalized despite surgery. CONCLUSIONS: The thickness of the soft-tissue Pog may increase slightly after surgery in patients with skeletal Class III malocclusion with a higher preoperative mandibular plane angle, but normalization in the area cannot be completely achieved despite surgery.

Bio-Interactive Zwitterionic Dental Biomaterials for Improving Biofilm Resistance: Characteristics and Applications.

Biofilms are formed on surfaces inside the oral cavity covered by the acquired pellicle and develop into a complex, dynamic, microbial environment. Oral biofilm is a causative factor of dental and periodontal diseases. Accordingly, novel materials that can resist biofilm formation have attracted significant attention. Zwitterionic polymers (ZPs) have unique features that resist protein adhesion and prevent biofilm formation while maintaining biocompatibility. Recent literature has reflected a rapid increase in the application of ZPs as coatings and additives with promising outcomes. In this review, we briefly introduce ZPs and their mechanism of antifouling action, properties of human oral biofilms, and present trends in anti-biofouling, zwitterionic, dental materials. Furthermore, we highlight the existing challenges in the standardization of biofilm research and the future of antifouling, zwitterated, dental materials.

Enhanced Osteogenic Differentiation of Human Mesenchymal Stem Cells on Amine-Functionalized Titanium Using Humidified Ammonia Supplied Nonthermal Atmospheric Pressure Plasma.

The surface molecular chemistry, such as amine functionality, of biomaterials plays a crucial role in the osteogenic activity of relevant cells and tissues during hard tissue regeneration. Here, we examined the possibilities of creating amine functionalities on the surface of titanium by using the nonthermal atmospheric pressure plasma jet (NTAPPJ) method with humidified ammonia, and the effects on human mesenchymal stem cell (hMSC) were investigated. Titanium samples were subjected to NTAPPJ treatments using nitrogen (N-P), air (A-P), or humidified ammonia (NA-P) as the plasma gas, while control (C-P) samples were not subjected to plasma treatment. After plasma exposure, all treatment groups showed increased hydrophilicity and had more attached cells than the C-P. Among the plasma-treated samples, the A-P and NA-P showed surface oxygen functionalities and exhibited greater cell proliferation than the C-P and N-P. The NA-P additionally showed surface amine-related functionalities and exhibited a higher level of alkaline phosphatase activity and osteocalcin expression than the other samples. The results can be explained by increases in fibronectin absorption and focal adhesion kinase gene expression on the NA-P samples. These findings suggest that NTAPPJ technology with humidified ammonia as a gas source has clinical potential for hard tissue generation.

Intraoral Premaxillary Distraction in a Patient With Maxillary Retrognathic Cleft Lip and Palate: A Case Report.

Patients with cleft lip and palate sometimes have a retruded maxilla. Here, we describe the case of a young man in whom crowding of the maxillary teeth and an anteroposterior discrepancy of the maxilla were resolved by premaxillary distraction osteogenesis (DO) using 3 individual intraoral distractors. Our experience in this patient confirms that premaxillary DO with 3 intraoral distractors and preoperative simulation can achieve stable maxillary advancement and arch expansion without impairing velopharyngeal incompetence.

Long-Term Stability of Pre-Orthodontic Orthognathic Bimaxillary Surgery Using Intraoral Vertical Ramus Osteotomy Versus Conventional Surgery.

PURPOSE: The aim of the present study was to compare the long-term stability of bimaxillary surgery using an intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontic treatment. MATERIALS AND METHODS: The present retrospective study included 31 consecutive patients with skeletal Class III malocclusions who had undergone bimaxillary surgery (Le Fort I osteotomy and bilateral IVRO). Patients were divided into 2 groups based on treatment type: pre-orthodontic orthognathic surgery (POGS; n = 17) and conventional surgery with presurgical orthodontic treatment (CS; n = 14). Lateral cephalograms were obtained before surgery, 1 day after surgery, 1 month after surgery, 1 year after surgery, and 2 years after surgery to evaluate skeletal and soft tissue changes between the 2 groups. Data were analyzed using χ2 tests, Mann-Whitney U tests, repeated-measures analyses of variance, and independent t tests. RESULTS: There was no significant difference in skeletal or soft tissue measurements-with the exception of the angle between the sella-and-nasion plane and the occlusal plane (SN-OP; P < .001)-between the CS and POGS groups at 2 years after IVRO. The SN-OP had increased in the CS group but decreased in the POGS group at 2 years after surgery. CONCLUSIONS: These findings suggest that POGS and CS have similar long-term stability in patients with skeletal Class III malocclusion.

Effect of growth hormone treatment on craniofacial growth in children: Idiopathic short stature versus growth hormone deficiency.

BACKGROUND/PURPOSE: Few studies have evaluated craniofacial growth in boys and girls with idiopathic short stature (ISS) during growth hormone (GH) treatment. The aim of this study was to evaluate the effect of GH treatment on craniofacial growth in children with ISS, compared with those with growth hormone deficiency (GHD). METHODS: This study included 36 children (mean age, 11.3 ± 1.8 years) who were treated with GH consecutively. Lateral cephalograms were analyzed before and 2 years after start of GH treatment. RESULTS: There were no significant differences in age and sex between ISS and GHD groups and the reference group from semilongitudinal study (10 boys and 8 girls from each group). Before treatment, girls with ISS showed a skeletal Class II facial profile compared with the GHD and reference groups (p = 0.003). During GH treatment, the amount of maxillary length increased beyond norm in the ISS and GHD groups in boys (p = 0.035) > 3 standard deviation score (SDS). Meanwhile, mandibular ramus height (p = 0.001), corpus length, and total mandibular length (p = 0.007 for both) increased more in girls with ISS than in girls with GHD. Lower and total anterior facial heights increased more in girls with ISS than in girls with GHD (p = 0.021 and p = 0.007, respectively), > 7-11 SDS. CONCLUSION: GH should be administered carefully when treating girls with ISS, because GH treatment has great effects on vertical overgrowth of the mandible and can result in longer face.

Intraoral Vertical Ramus Osteotomy Results in Good Long-Term Mandibular Stability in Patients With Mandibular Prognathism and Anterior Open Bite.

PURPOSE: Few studies have evaluated the outcomes of intraoral vertical ramus osteotomy (IVRO) for the correction of skeletal Class III malocclusion with an anterior open bite and the potential for postoperative relapse. Therefore, this study evaluated the stability of outcomes of IVRO for mandibular prognathism with and without an anterior open bite. MATERIAL AND METHODS: This retrospective cohort study included consecutive patients with skeletal Class III malocclusion with (AOB group) and without (NAOB group) an anterior open bite who underwent IVRO at Yonsei Dental Hospital (Seoul, Korea). Lateral cephalograms were analyzed for predictor (open bite, yes or no) and outcome (horizontal and vertical relapse in the mandible) variables before and 7 days, 1 year, and 2 years after surgery. Other variables included the patients' demographic characteristics. Data were analyzed using independent t tests, repeated measures analysis of variance, Pearson correlation coefficients, and multiple linear regression analysis. RESULTS: The 2 groups (n = 15 each) were matched for baseline demographic characteristics. During the 2-year postoperative period, anterior and superior mandibular movements were observed in the NAOB group, whereas posterior and superior movements were observed in the AOB group. However, there were no meaningful intergroup differences in horizontal and vertical relapses of the mandible at all time points, although the amount of postoperative inferior relapse increased with a decrease in the amount of initial overbite. CONCLUSIONS: IVRO for the correction of skeletal Class III malocclusion resulted in good postoperative stability over time, regardless of the presence of a preoperative open bite, although the amount of postoperative inferior relapse showed a weak negative correlation with the initial overbite. Thus, IVRO can be a clinically acceptable treatment for skeletal Class III malocclusion with an anterior open bite.

Is There a Difference in Stability After Intraoral Vertical Ramus Osteotomy Between Vertically High-Angle and Normal-Angle Patients?

PURPOSE: Few studies have evaluated the relapse pattern of intraoral vertical ramus osteotomy (IVRO) for the correction of mandibular prognathism with a high angle. The aim of this study was to measure the association between vertical facial types (high and normal mandibular plane angle) and relapse after IVRO for the management of mandibular prognathism. MATERIALS AND METHODS: The retrospective cohort study sample (skeletal Class III patients) was divided into 2 groups according to the angle of the sella-nasion plane relative to the mandibular plane (SN-MP) at the initial examination. Lateral cephalograms were analyzed for the predictor (facial type) and outcome (cephalometric changes over time) variables before surgery, 7 days after surgery, and 12 months after surgery. The 2 groups were matched for sample size (n = 20 in each). Data were analyzed using repeated-measures analysis of variance with Bonferroni correction. RESULTS: The normal-angle group (group N, SN-MP from 27° to 37°) and high-angle group (group H, SN-MP >37°) were not significantly different in terms of gender and age at the initial examination. Seven days after surgery, the mandibles in group H moved 2.5 mm more superiorly than those in group N (P = .013); consequently, the amount of overbite correction in group H was approximately 2 mm greater than that in group N (P = .002). Nevertheless, 12 months after surgery, there was no statistically significant difference in relapse of the maxilla and mandible between the 2 groups. In the 2 groups, the mandible moved approximately 0.7 mm superiorly during retention. CONCLUSIONS: These findings suggest that IVRO is a clinically acceptable and stable treatment modality for mandibular prognathism with a high angle.

Stability of Pre-Orthodontic Orthognathic Surgery Using Intraoral Vertical Ramus Osteotomy Versus Conventional Treatment.

PURPOSE: Postoperative skeletal and dental changes were evaluated in patients with mandibular prognathism who underwent mandibular setback surgery using an intraoral vertical ramus osteotomy (IVRO) with and without presurgical orthodontic treatment. MATERIAL AND METHODS: This retrospective cohort study included consecutive patients with skeletal Class III malocclusions who underwent IVRO. Patients treated with pre-orthodontic orthognathic surgery (POGS) were compared with patients treated with conventional surgery (CS) with presurgical orthodontics (control) using lateral cephalograms (taken preoperatively, 7 days postoperatively, and 12 months postoperatively). Predictor (group and timing), outcome (cephalometric measurements over time), and other (ie, baseline characteristics) variables were evaluated to determine the differences in postoperative horizontal and vertical positional changes of the mandible, such as point B. Baseline demographics were similar between the groups (N = 37; CS group, n = 17; POGS group, n = 20). The data were analyzed with an independent t test, the Mann-Whitney U test, the Fisher exact t test, Pearson correlation analysis, and simple linear regression analysis. RESULTS: The mean setback of the mandible at point B was similar, but the mandible of the POGS group, particularly the distal segment, moved superiorly during the postoperative period in conjunction with the removal of premature occlusal contacts (P < .001). In the CS group, the mandible had significantly more backward movement 12 months after surgery compared with the POGS group (P < .01). In the POGS group, horizontal and vertical postsurgical changes were linearly correlated with the amount of setback and vertical movement of the mandible. CONCLUSIONS: Mandibular setback surgery using IVRO without presurgical orthodontics leads to considerably different postoperative skeletal and dental changes compared with conventional treatment, with more superior movement being observed at point B during the 1-year postoperative period.

Changes in the craniofacial complex and alveolar bone height of young adults: Applications to dental medicine.

The few studies on craniofacial complex changes in adults have reported contradictory findings. The aim of this study was to radiographically evaluate changes in the craniofacial complex and alveolar bone height of young adults over a 4-year period. This prospective study included 82 young adults (62 men; mean age, 19.0 ± 0.8 years; 20 women; mean age, 18.8 ± 0.9 years). Three radiographic examinations were performed longitudinally: the first (T0) was conducted at the start of the study, the second (T1) was conducted 2 years later, and the third (T2) was conducted at the end of the study period. As part of these examinations, lateral cephalograms, maxillary and mandibular anterior periapical radiographs, and bilateral posterior bitewing radiographs were obtained. During the 4-year follow-up period, all linear cephalometric measurements were significantly greater in men than in women. The amount of increase in the anterior facial height between T1 and T2 was lower in women than in men (P = 0.029). The rate of uprighting of the upper incisors was lower in men than in women over time (P = 0.020). The apex of the nose moved inferiorly between T0 and T2 (P = 0.006). The average overall change in the alveolar bone height was 0.27 mm and the yearly change was 0.07 mm over the 4-year period (P< 0.001). Significant changes in the skeletal, dental, and soft tissue, as well as, natural changes in alveolar bone, occur in young adults over time. Clin. Anat. 29:1011-1017, 2016. © 2016 Wiley Periodicals, Inc.