Atypical post-infectious glomerulonephritis with c-ANCA positivity followed by endocarditis.

Post-infectious glomerulonephritis (PIGN), an uncommon variety of glomerulonephritis (GN), is characterized by emergence of nephritic syndrome within a few weeks following an infectious event. PIGN typically presents as a mild condition and tends to resolve by the time of diagnosis for GN. Aggregatibacter actinomycetemcomitans belongs to the HACEK group of bacteria, which constitutes less than 3% of bacteria responsible for community-acquired infective endocarditis. We present a case of 29-year-old man suspected of lymphoma with B-symptoms along with severe splenomegaly and nephromegaly. Shortly after, he developed an episode of nephritic syndrome accompanied by acute kidney injury (AKI) and high titers of cytoplasmic ANCA (c-ANCA)-positivity. Kidney biopsy revealed PIGN with tubulointerstitial nephritis. Despite treatment with antibiotics and corticosteroid, he visited the emergency room due to worsening dyspnea and multi-organ failure. An echocardiogram showed a bicuspid aortic valve with vegetation unseen on previous echocardiogram. He underwent aortic valve replacement immediately without adverse events. Four months after valve replacement, his renal function and cardiac performance have remained stable. We report a case of PIGN with AKI and high titers of c-ANCA appearing later as an infective endocarditis due to Aggregatibacter actinomycetemcomitans. With careful clinical observation and appropriate and timely management, satisfactory outcomes for patient health are possible.

Plant-Based Decellularization: A Novel Approach for Perfusion-Compatible Tissue Engineering Structures.

This study explores the potential of plant-based decellularization in regenerative medicine, a pivotal development in tissue engineering focusing on scaffold development, modification, and vascularization. Plant decellularization involves removing cellular components from plant structures, offering an eco-friendly and cost-effective alternative to traditional scaffold materials. The use of plant-derived polymers is critical, presenting both benefits and challenges, notably in mechanical properties. Integration of plant vascular networks represents a significant bioengineering breakthrough, aligning with natural design principles. The paper provides an in-depth analysis of development protocols, scaffold fabrication considerations, and illustrative case studies showcasing plant-based decellularization applications. This technique is transformative, offering sustainable scaffold design solutions with readily available plant materials capable of forming perfusable structures. Ongoing research aims to refine protocols, assess long-term implications, and adapt the process for clinical use, indicating a path toward widespread adoption. Plant-based decellularization holds promise for regenerative medicine, bridging biological sciences with engineering through eco-friendly approaches. Future perspectives include protocol optimization, understanding long-term impacts, clinical scalability, addressing mechanical limitations, fostering collaboration, exploring new research areas, and enhancing education. Collectively, these efforts envision a regenerative future where nature and scientific innovation converge to create sustainable solutions, offering hope for generations to come.

Bioinks for bioprinting using plant-derived biomaterials.

Three-dimensional bioprinting has revolutionized tissue engineering by enabling the fabrication of complex and functional human tissues and organs. An essential component of successful 3D bioprinting is the selection of an appropriate bioink capable of supporting cell proliferation and viability. Plant-derived biomaterials, because of their abundance, biocompatibility, and tunable properties, hold promise as bioink sources, thus offering advantages over animal-derived biomaterials, which carry immunogenic concerns. This comprehensive review explores and analyzes the potential of plant-derived biomaterials as bioinks for 3D bioprinting of human tissues. Modification and optimization of these materials to enhance printability and biological functionality are discussed. Furthermore, cancer research and drug testing applications of the use of plant-based biomaterials in bioprinting various human tissues such as bone, cartilage, skin, and vascular tissues are described. Challenges and limitations, including mechanical integrity, cell viability, resolution, and regulatory concerns, along with potential strategies to overcome them, are discussed. Additionally, this review provides insights into the potential use of plant-based dECM as bioinks, future prospects, and emerging trends in the use of plant-derived biomaterials for 3D bioprinting applications. The potential of plant-derived biomaterials as bioinks for 3D bioprinting of human tissues is highlighted herein. However, further research is necessary to optimize their processing, standardize their properties, and evaluate their long-term in vivo performance. Continued advancements in plant-derived biomaterials have the potential to revolutionize tissue engineering and facilitate the development of functional and regenerative therapies for diverse clinical applications.

Discovery and Validation of Survival-Specific Genes in Papillary Renal Cell Carcinoma Using a Customized Next-Generation Sequencing Gene Panel.

PURPOSE: Papillary renal cell carcinoma (PRCC), the second most common kidney cancer, is morphologically, genetically, and molecularly heterogeneous with diverse clinical manifestations. Genetic variations of PRCC and their association with survival are not yet well-understood. This study aimed to identify and validate survival-specific genes in PRCC and explore their clinical utility. MATERIALS AND METHODS: Using machine learning, 293 patients from the Cancer Genome Atlas-Kidney Renal Papillary Cell Carcinoma (TCGA-KIRP) database were analyzed to derive genes associated with survival. To validate these genes, DNAs were extracted from the tissues of 60 Korean PRCC patients. Next generation sequencing was conducted using a customized PRCC gene panel of 202 genes, including 171 survival-specific genes. Kaplan-Meier and Log-rank tests were used for survival analysis. Fisher's exact test was performed to assess the clinical utility of variant genes. RESULTS: A total of 40 survival-specific genes were identified in the TCGA-KIRP database through machine learning and statistical analysis. Of them, 10 (BAP1, BRAF, CFDP1, EGFR, ITM2B, JAK1, NODAL, PCSK2, SPATA13, and SYT5) were validated in the Korean-KIRP database. Among these survival gene signatures, three genes (BAP1, PCSK2, and SPATA13) showed survival specificity in both overall survival (OS) (p = 0.00004, p = 1.38 × 10-7, and p = 0.026, respectively) and disease-free survival (DFS) (p = 0.00002, p = 1.21 × 10-7, and p = 0.036, respectively). Notably, the PCSK2 mutation demonstrated survival specificity uniquely in both the TCGA-KIRP (OS: p = 0.010 and DFS: p = 0.301) and Korean-KIRP (OS: p = 1.38 × 10-7 and DFS: p = 1.21 × 10-7) databases. CONCLUSIONS: We discovered and verified genes specific for the survival of PRCC patients in the TCGA-KIRP and Korean-KIRP databases. The survival gene signature, including PCSK2 commonly obtained from the 40 gene signature of TCGA and the 10 gene signature of the Korean database, is expected to provide insight into predicting the survival of PRCC patients and developing new treatment.

Coaxial bioprinting of a stentable and endothelialized human coronary artery-sized in vitro model.

Atherosclerosis accounts for two-thirds of deaths attributed to cardiovascular diseases, which continue to be the leading cause of mortality. Current clinical management strategies for atherosclerosis, such as angioplasty with stenting, face numerous challenges, including restenosis and late thrombosis. Smart stents, integrated with sensors that can monitor cardiovascular health in real-time, are being developed to overcome these limitations. This development necessitates rigorous preclinical trials on either animal models or in vitro models. Despite efforts being made, a suitable human-scale in vitro model compatible with a cardiovascular stent has remained elusive. To address this need, this study utilizes an in-bath bioprinting method to create a human-scale, freestanding in vitro model compatible with cardiovascular stents. Using a coaxial nozzle, a tubular structure of human coronary artery (HCA) size is bioprinted with a collagen-based bioink, ensuring good biocompatibility and suitable rheological properties for printing. We precisely replicated the dimensions of the HCA, including its internal diameter and wall thickness, and simulated the vascular barrier functionality. To simplify post-processing, a pumpless perfusion bioreactor is fabricated to culture a HCA-sized model, eliminating the need for a peristaltic pump and enabling scalability for high-throughput production. This model is expected to accelerate stent development in the future.

Donor-derived cell-free DNA predicted allograft rejection and severe microvascular inflammation in kidney transplant recipients.

Introduction: The aim of this study is to investigate the clinical validity of donor-derived cell-free DNA (dd-cfDNA) in comparison with that of donor specific anti-HLA antibody (DSA) for predicting biopsy-proven rejection (BPR)and severe microvascular inflammation (severe MVI) in kidney transplant recipients (KTRs). Methods: In this prospective observational investigation, 64 KTRs who underwent the indicated biopsies were included. Blood samples collected prior to biopsy were tested for dd-cfDNA and DSA. Biopsy specimens were classified by a renal pathologist according to the Banff classification. The predictive performance of dd-cfDNA and DSA for histological allograft diagnosis was assessed. Results: KTRs were categorized into the high and low dd-cfDNA groups based on a level of 0.4%. Eighteen patients (28.1%) had positive DSA at biopsy, exhibiting higher dd-cfDNA levels than the DSA-negative patients. BPR and severe MVI incidences were elevated in the high dd-cfDNA group (BPR: 42.9% vs. 3.4%, P <0.001; severe MVI: 37.1% vs. 3.4%, P = 0.001). Also, elevated glomerulitis and MVI scores were observed in the high dd-cfDNA group. DSA showed the highest predictive value for BPR (AUC = 0.880), whereas dd-cfDNA alone excelled in predicting severe MVI (AUC = 0.855). Combination of DSA and dd-cfDNA (>0.4%) yielded sensitivities of 80.0% and 50.0% with specificities of 90.7% and 88.0% for antibody-mediated rejection and severe MVI detection, respectively. Conclusion: The dd-cfDNA test is a predictive tool for BPR and severe MVI, and it can improve the performance, especially when combined with DSA for BPR.

Enhanced Osteogenesis in 2D and 3D Culture Systems Using RGD Peptide and α-TCP Phase Transition within Alginate-Based Hydrogel.

Cell-laden hydrogels have been extensively investigated in various tissue engineering fields by their potential capacity to deposit numerous types of cells in a specific area. They are largely used in soft-tissue engineering applications because of their low mechanical strength. In addition, sodium alginate is well-known for its encapsulation, loading capacity and for being easily controllable; however, it lacks cell-binding ligands and hence the ability to adhere cells. In this study, it is aimed to enhance osteogenesis in cells encapsulated in alginate and improve its mechanical properties by introducing a synthetic peptide and calcium phosphate phase transition. To increase cell-hydrogel interactions and increasing cell viability, an RGD peptide is added to a photocrosslinkable methacrylate-modified alginate, and alpha-tricalcium phosphate (α-TCP) is added to the hydrogel to increase its mechanical strength via phase transition. Cell proliferation, growth, and differentiation are assessed in both 2D and 3D cell cultures. The addition of α-TCP significantly improved the mechanical properties of the hydrogel. Moreover, the RGD peptide and α-TCP showed a synergistic effect with significantly improved cell adhesion and osteogenesis in both 2D and 3D cell cultures. Therefore, the functional hydrogel developed in this study can potentially be used for bone tissue regeneration.

Composition control of additively manufactured color-graded temporary veneer.

OBJECTIVE: The aim of this study was to design and assess composite resin composition for patient-specific esthetic color-graded temporary veneer. METHODS: Various compositions of composite structures (assorted by Ba2SiO4 filler, TiO2 pigment, and photoinitiator) were prepared via additive manufacturing with 3 s UV exposure (405 nm, 10 W/cm2) per 50 µm thick layer followed by 20 min post-curing treatment after fabrication. The effect of each component on the generated color shades was observed and compared to the commonly used VITA shade guide. The coloration was explored by staining aging treatment under dry, wet, artificial saliva environments, coffee, and cola. The mechanical properties were also evaluated. Color measurement and comparison were done using a colorimeter (lightness (L*), green-red color (a*), and blue-yellow color (b*)), and the changes were calculated by CIEDE2000 (ΔE00), translucency parameter (TP) and whiteness index (WID). The composition color analysis results were then applied to produce a color-graded temporary veneer for mimicking a natural look. RESULT: Mechanically, all composition result in adequate bending strength with maximum achievable strength of 111.64 MPa. At the same time, the composite color was affected by each constituent differently. The L* value, which indicates the color lightness of the composite, was considerably tuned by the TiO2 pigment, whereas Ba2SiO4 filler only triggered minor changes. Photoinitiator concentration significantly affected the yellowness, indicated by the increased b* value. Similar tendency also observed toward the calculated TP and WID as well. Based on these evaluations, color-graded temporary veneer successfully generated, matching the VITA A3, A2, and B1 shades gradation. However, the stability of the composite color decreased at high amounts of Ba2SiO4 and photoinitiator. SIGNIFICANCE: The study presents a composition guide for fabricating temporary patient-specific color-graded veneer. It provides insights on the effect of the constituent material on dental esthetics.

Sex-specific survival gene mutations are discovered as clinical predictors of clear cell renal cell carcinoma.

Although sex differences have been reported in patients with clear cell renal cell carcinoma (ccRCC), biological sex has not received clinical attention and genetic differences between sexes are poorly understood. This study aims to identify sex-specific gene mutations and explore their clinical significance in ccRCC. We used data from The Cancer Genome Atlas-Kidney Renal Clear Cell Carcinoma (TCGA-KIRC), The Renal Cell Cancer-European Union (RECA-EU) and Korean-KIRC. A total of 68 sex-related genes were selected from TCGA-KIRC through machine learning, and 23 sex-specific genes were identified through verification using the three databases. Survival differences according to sex were identified in nine genes (ACSS3, ALG13, ASXL3, BAP1, JADE3, KDM5C, KDM6A, NCOR1P1, and ZNF449). Female-specific survival differences were found in BAP1 in overall survival (OS) (TCGA-KIRC, p = 0.004; RECA-EU, p = 0.002; and Korean-KIRC, p = 0.003) and disease-free survival (DFS) (TCGA-KIRC, p = 0.001 and Korean-KIRC, p = 0.000004), and NCOR1P1 in DFS (TCGA-KIRC, p = 0.046 and RECA-EU, p = 0.00003). Male-specific survival differences were found in ASXL3 (OS, p = 0.017 in TCGA-KIRC; and OS, p = 0.005 in RECA-EU) and KDM5C (OS, p = 0.009 in RECA-EU; and DFS, p = 0.016 in Korean-KIRC). These results suggest that biological sex may be an important predictor and sex-specific tailored treatment may improve patient care in ccRCC.