Structural Studies of Inhibitors with Clinically Relevant Influenza Endonuclease Variants.

Vital to the treatment of influenza is the use of antivirals such as Oseltamivir (Tamiflu) and Zanamivir (Relenza); however, antiviral resistance is becoming an increasing problem for these therapeutics. The RNA-dependent RNA polymerase acidic N-terminal (PAN) endonuclease, a critical component of influenza viral replication machinery, is an antiviral target that was recently validated with the approval of Baloxavir Marboxil (BXM). Despite its clinical success, BXM has demonstrated susceptibility to resistance mutations, specifically the I38T, E23K, and A36 V mutants of PAN. To better understand the effects of these mutations on BXM resistance and improve the design of more robust therapeutics, this study examines key differences in protein-inhibitor interactions with two inhibitors and the I38T, E23K, and A36 V mutants. Differences in inhibitor binding were evaluated by measuring changes in binding to PAN using two biophysical methods. The binding mode of two distinct inhibitors was determined crystallographically with both wild-type and mutant forms of PAN. Collectively, these studies give some insight into the mechanism of antiviral resistance of these mutants.

Metal-Organic Frameworks Constructed from Branched Oligomers.

Metal-organic frameworks (MOFs) prepared from oligomeric or polymeric organic ligands have been studied and are termed oligoMOFs and polyMOFs, respectively. Herein, several oligoMOFs are described that have been prepared from branched oligomers with dendritic or star-like architectures. Branched oligomeric ligands with four (4(H2bdc)-b) or eight (8(H2bdc)-b) 1,4-benzene dicarboxylic acid (H2bdc) groups were prepared and used to synthesize isoreticular-type Zn(II)-based MOFs (IRMOF). A branched tetramer (4(H2bdc)-b) produced an oligoIRMOF-1 with improved ambient stability compared with IRMOF-1 or previously described oligoMOFs. To understand the effect of the ligand architecture, oligoIRMOFs were also prepared from a linear tetramer (4(H2bdc)-l). For a branched octamer (8(H2bdc)-b), it was found that the addition of an organic base was required to produce crystalline oligoIRMOFs. Multivariate MOFs (MTV-MOFs) could also be readily prepared with a combination of an octamer (8(H2bdc)-b) and H2bdc.

Unravelling Ultrafast Li Ion Transport in Functionalized Metal-Organic Framework-Based Battery Electrolytes.

Nonaqueous fluidic transport and ion solvation properties under nanoscale confinement are poorly understood, especially in ion conduction for energy storage and conversion systems. Herein, metal-organic frameworks (MOFs) and aprotic electrolytes are studied as a robust platform for molecular-level insights into electrolyte behaviors in confined spaces. By employing computer simulations, along with spectroscopic and electrochemical measurements, we demonstrate several phenomena that deviate from the bulk, including modulated solvent molecular configurations, aggregated solvation structures, and tunable transport mechanisms from quasi-solid to quasi-liquid in functionalized MOFs. Technologically, taking advantage of confinement effects may prove useful for addressing stability concerns associated with volatile organic electrolytes while simultaneously endowing ultrafast transport of solvates, resulting in improved battery performance, even at extreme temperatures. The molecular-level insights presented here further our understanding of structure-property relationships of complex fluids at the nanoscale, information that can be exploited for the predictive design of more efficient electrochemical systems.

Reversible Postsynthetic Modification in a Metal-Organic Framework.

Postsynthetic modification (PSM) of metal-organic frameworks (MOFs) provides access to functional materials and advanced porous solid engineering. Herein, we report the reversible PSM of a multivariate isoreticular MOF by applying dynamic furan-maleimide Diels-Alder (DA) chemistry. The key step involves incorporating a furan group into the MOF via "click" PSM, which can then undergo repeated cycles of modification and de-modification with maleimides. The structural integrity, crystallinity, and porosity of the furan-appended MOF remained intact even after three consecutive PSM/de-modification cycles using three different functionalized maleimides.

Quantifying Ligand Binding to the Surface of Metal-Organic Frameworks.

The binding of molecules to the exterior surface of metal-organic frameworks (MOFs) is not a well-understood phenomenon. Herein, the surface chemistry of three MOFs, UiO-66, MIL-88B-NH2, and ZIF-8, is investigated using dye-displacement experiments. MOF particle surfaces were modified with ligand-appended BODIPY dyes. The ability of the coordinated dyes to be displaced by a variety of exogenous ligands was measured by ultraviolet-visible spectroscopy. This method allowed for measurement of apparent binding constants for different ligands to the MOF surface. As might be expected, ligand affinity was dependent on the nature of the underlying metal-ligand composition of the MOF. This work provides a quantitative evaluation of ligand binding to MOF surfaces and important insights for the modulation, modification, and manipulation of MOFs.

Self-Reported Dysphagia and Psychosocial Health Among Community-Dwelling Older Adults: Results of a National Study.

BACKGROUND: The risk of dysphagia increases with age, affecting up to 33% of adults over the age of 65. Older adults with dysphagia are at increased risk for negative physical health outcomes such as aspiration pneumonia and death. However, the relationship between dysphagia and psychosocial health is uncertain in this population. OBJECTIVE: We aimed to assess the associations between dysphagia and psychosocial health among older adults (≥ 65) with self-reported dysphagia. DESIGN: We performed a cross-sectional assessment of the National Health and Aging Trends Study (NHATS) conducted in 2019. MAIN MEASURES: Weighted logistic and linear regression models were used to assess the relationship between self-reported dysphagia and psychosocial health using established patient-reported outcome measures including those for depression, anxiety, and social isolation previously used in NHATS analyses, while adjusting for demographics, comorbid conditions, and risk factors for dysphagia identified by purposeful selection. KEY RESULTS: Among the 4041 adults in this cohort, almost half (40%) were between 70 and 74 years old, more than half were female (55%), and a significantly higher proportion were White, non-Hispanic respondents (78.1%, p < 0.01) compared with other races and ethnicities. There were 428 (10.5%) respondents reporting dysphagia symptoms within the previous month. In the multivariable model, dysphagia was associated with significantly increased odds of anxiety (OR 1.33 [1.06, 1.67]) and a significantly decreased sense of well-being (coefficient - 1.10 [- 1.66, - 0.54]), but no association was detected for social isolation. CONCLUSIONS: When accounting for factors associated with underlying physical health status, self-reported dysphagia is independently associated with negative psychosocial health and warrants attention by healthcare providers. Future studies should aim to identify causal factors and the extent to which interventions may mitigate these factors.

A Coordination Polymer of Vaska's Complex as a Heterogeneous Catalyst for the Reductive Formation of Enamines from Amides.

Low-valent metal-organic frameworks (LVMOFs) and related materials have gained interest due to their potential applications in heterogeneous catalysis. However, of the few LVMOFs that have been reported, none have shown catalytic activity. Herein, a low-valent metal-organic material constructed from phosphine linkers and IrI nodes is reported. This material is effectively a crystalline, insoluble analogue of Vaska's complex. As such, the material reversibly binds O2 and catalyzes the reductive formation of enamines from amides.

An X-ray Photoelectron Spectroscopy Study of Postsynthetic Exchange in UiO-66.

Postsynthetic exchange (PSE) is a method that is widely used to change the composition of metal-organic frameworks (MOFs) by replacing connecting linkers or metal nodes after the framework has been synthesized. However, few techniques can probe the nature and distribution of exchanged species following PSE. Herein, we show that X-ray photoelectron spectroscopy can be used to compare the relative concentrations of exchanged ligands at the surface and interior regions of MOF particles. Specifically, PSE of iodobenzene dicarboxylate ligands results in a gradient distribution from surface to bulk in UiO-66 nanoparticles that depends on PSE time. X-ray photoelectron spectroscopy also reveals differences between the surface chemistry of the PSE product and that of the direct synthesis product.

Developing Metal-Binding Isosteres of 8-Hydroxyquinoline as Metalloenzyme Inhibitor Scaffolds.

The use of metal-binding pharmacophores (MBPs) in fragment-based drug discovery has proven effective for targeted metalloenzyme drug development. However, MBPs can still suffer from pharmacokinetic liabilities. Bioisostere replacement is an effective strategy utilized by medicinal chemists to navigate these issues during the drug development process. The quinoline pharmacophore and its bioisosteres, such as quinazoline, are important building blocks in the design of new therapeutics. More relevant to metalloenzyme inhibition, 8-hydroxyquinoline (8-HQ) and its derivatives can serve as MBPs for metalloenzyme inhibition. In this report, 8-HQ isosteres are designed and the coordination chemistry of the resulting metal-binding isosteres (MBIs) is explored using a bioinorganic model complex. In addition, the physicochemical properties and metalloenzyme inhibition activity of these MBIs were investigated to establish drug-like profiles. This report provides a new group of 8-HQ-derived MBIs that can serve as novel scaffolds for metalloenzyme inhibitor development with tunable, and potentially improved, physicochemical properties.

Tethering Effects in Oligomer-Based Metal-Organic Frameworks.

Metal-organic frameworks (MOFs) can be constructed using conventional molecular linkers or polymeric linkers (polyMOFs), but the relationship and relative properties of these related materials remain understudied. As an intermediate between these two extremes, a library of oligomeric ligand precursors (dimers, trimers) was used to prepare a series of oligomeric-linker MOFs (oligoMOFs) based on the prototypical IRMOF-1 system. IRMOF-1 was found to be remarkably tolerant to a wide variety of oligomeric linkers, the use of which greatly enhanced the MOF yield and prevented framework interpenetration. Tether length-dependent ordering of ligand and metal cluster orientations was also observed in these oligoMOFs. Improved low-humidity stability was found in oligoIRMOF-1 samples, with surface area preservation varying as a function of tether length and a complete suppression of crystalline hydrolysis products for all oligoIRMOF-1 materials. These findings pave the way toward a better understanding of the structure-function relationships between monomeric, oligomeric, and polymeric MOFs and highlight an underutilized strategy for tuning MOF properties.

MOF-Polymer Hybrid Materials: From Simple Composites to Tailored Architectures.

Metal-organic frameworks (MOFs) are inherently crystalline, brittle porous solids. Conversely, polymers are flexible, malleable, and processable solids that are used for a broad range of commonly used technologies. The stark differences between the nature of MOFs and polymers has motivated efforts to hybridize crystalline MOFs and flexible polymers to produce composites that retain the desired properties of these disparate materials. Importantly, studies have shown that MOFs can be used to influence polymer structure, and polymers can be used to modulate MOF growth and characteristics. In this Review, we highlight the development and recent advances in the synthesis of MOF-polymer mixed-matrix membranes (MMMs) and applications of these MMMs in gas and liquid separations and purifications, including aqueous applications such as dye removal, toxic heavy metal sequestration, and desalination. Other elegant ways of synthesizing MOF-polymer hybrid materials, such as grafting polymers to and from MOFs, polymerization of polymers within MOFs, using polymers to template MOFs, and the bottom-up synthesis of polyMOFs and polyMOPs are also discussed. This review highlights recent papers in the advancement of MOF-polymer hybrid materials, as well as seminal reports that significantly advanced the field.

Preorganized Homochiral Pyrrole-Based Receptors That Display Enantioselective Anion Binding.

Herein, a new scaffold for anion recognition based on a tripodal tris(pyrrolamide) motif is presented. The receptors were able to bind to a variety of anions with high affinity. Using density functional theory methods, the three-dimensional geometry of the receptor-anion complex was calculated. These calculations show that the receptors bind anions via a preorganized cavity of amide and pyrrole hydrogen bond donor groups. Based on these findings, homochiral tris(pyrrolamide) receptors were prepared, which produced as much as a 1.6-fold greater affinity for (S)-(+)-mandelate over (R)-(-)-mandelate, demonstrating the ability to differentiate between these enantiomeric anions. The interaction of (S)-(+)-mandelate and (R)-(-)-mandelate within the homochiral receptor was examined by solution NMR spectroscopy and density functional theory calculations. These findings indicate that the preorganized positioning of the pyrrole groups and subsequent sterics allows to differentiate between the stereoisomeric anions.

Tranexamic acid administration practice in otolaryngology head & neck surgery; international survey.

PURPOSE: Tranexamic acid (TXA) is a potent pro-coagulation drug. Pre-operative, preventive TXA administration and TXA use for active bleeding are established treatments in many medical situations; yet, less is known about its use in otolaryngology head and neck surgery practice. The primary study goals were: MATERIALS AND METHODS: This is an international survey exploring TXA administration strategy. The electronic, anonymous, questionnaire was emailed to all registered Israeli and American Otolaryngology Head and Neck Surgery (OHNS) physicians, investigating TXA administration: RESULTS: Overall, 317 otolaryngologists participated in the study. TXA was administered to 40.5 % of the pediatric population and 50 % of the adult patients when needed. Epistaxis was the most common indication for TXA administration (48-55 %). A small number of otolaryngologists, 4-13 %, recommended preventive TXA for various operations. More surgeons include TXA in their practice and adjusted the dose according to renal function in academic compared to non-academic medical centers and among otolaryngologists practicing in Israel compared to the United States. CONCLUSIONS: TXA is provided by many otolaryngologists to treat active epistaxis but to a substantially lesser extent as a preventive measure. TXA is given to children and adults, some with substantial comorbidities. Treatment is more common among surgeons working in academic institutes and medical centers in Israel.

Metal-Organic Frameworks with Zero and Low-Valent Metal Nodes Connected by Tetratopic Phosphine Ligands.

Metal-organic frameworks (MOFs) constructed with M0 nodes are attractive targets due to the reactivity of these low-valent metals, but examples of these MOFs remain exceedingly rare. The rational design of three-dimensional MOFs with Pd0 and Pt0 nodes using tetratopic phosphine ligands is reported. Five new MOFs have been synthesized by systematic variation of the phosphine ligands and metal precursors employed, and these represent the first examples of MOFs constructed using phosphine-metal bonds as the sole structural component. The MOFs display solid-state luminescence, with emission maxima that are significantly red-shifted compared to Pd(PPh3 )4 . In addition, a RhI low-valent coordination solid based on the same linker design is reported, which displays solid-state luminescence that is not observed for the molecular analogue.

Metal-Organic Frameworks with Low-Valent Metal Nodes.

Metal-organic frameworks (MOFs) are crystalline, 2- and 3-dimensional coordination polymers formed by bonding interactions between metals and multitopic organic ligands. These are typically formed using hard Lewis basic organic ligands with high oxidation state metal ions. The use of low-valent metals as structural elements in MOFs is far less common, despite the widespread use of such metals for catalysis, luminescence, and other applications. This Minireview focuses on recent advances in the field of low-valent MOFs and offers a perspective on the future development of these materials.

Controlled Two-Dimensional Alignment of Metal-Organic Frameworks in Polymer Films.

Controlling the alignment of metal-organic framework (MOF) particles is valueable for fully exploiting the anisotropic properties and porous structure of these materials. Herein, we propose a simple, one-step method that can control the two-dimensional (2D) alignment of MOF particles over large areas. Orientational control is achieved without consideration of the underlying lattice parameters or the need for particle surface modification, but instead was achieved by selection of the casting solvent on a water surface. Two distinct types of MOF particles, a hexagonal bifrustum morphology of MIL-96 and an octahedral morphology of the UiO-66 family were aligned and captured in a polydimethylsiloxane (PDMS) matrix using this approach. This work provides opportunities for studying and utilizing the anisotropic properties of MOFs in thin film applications.

Mimicking the Electron Transport Chain and Active Site of [FeFe] Hydrogenases in One Metal-Organic Framework: Factors That Influence Charge Transport.

[FeFe] hydrogenase (H2ase) enzymes are effective proton reduction catalysts capable of forming molecular dihydrogen with a high turnover frequency at low overpotential. The active sites of these enzymes are buried within the protein structures, and substrates required for hydrogen evolution (both protons and electrons) are shuttled to the active sites through channels from the protein surface. Metal-organic frameworks (MOFs) provide a unique platform for mimicking such enzymes due to their inherent porosity which permits substrate diffusion and their structural tunability which allows for the incorporation of multiple functional linkers. Herein, we describe the preparation and characterization of a redox-active PCN-700-based MOF (PCN = porous coordination network) that features both a biomimetic model of the [FeFe] H2ase active site as well as a redox-active linker that acts as an electron mediator, thereby mimicking the function of [4Fe4S] clusters in the enzyme. Rigorous studies on the dual-functionalized MOF by cyclic voltammetry (CV) reveal similarities to the natural system but also important limitations in the MOF-enzyme analogy. Most importantly, and in contrast to the enzyme, restrictions apply to the total concentration of reduced linkers and charge-balancing counter cations that can be accommodated within the MOF. Successive charging of the MOF results in nonideal interactions between linkers and restricted mobility of charge-compensating redox-inactive counterions. Consequently, apparent diffusion coefficients are no longer constant, and expected redox features in the CVs of the materials are absent. Such nonlinear effects may play an important role in MOFs for (electro)catalytic applications.

Green MIP-202(Zr) Catalyst: Degradation and Thermally Robust Biomimetic Sensing of Nerve Agents.

Rapid and robust sensing of nerve agent (NA) threats is necessary for real-time field detection to facilitate timely countermeasures. Unlike conventional phosphotriesterases employed for biocatalytic NA detection, this work describes the use of a new, green, thermally stable, and biocompatible zirconium metal-organic framework (Zr-MOF) catalyst, MIP-202(Zr). The biomimetic Zr-MOF-based catalytic NA recognition layer was coupled with a solid-contact fluoride ion-selective electrode (F-ISE) transducer, for potentiometric detection of diisopropylfluorophosphate (DFP), a F-containing G-type NA simulant. Catalytic DFP degradation by MIP-202(Zr) was evaluated and compared to the established UiO-66-NH2 catalyst. The efficient catalytic DFP degradation with MIP-202(Zr) at near-neutral pH was validated by 31P NMR and FT-IR spectroscopy and potentiometric F-ISE and pH-ISE measurements. Activation of MIP-202(Zr) using Soxhlet extraction improved the DFP conversion rate and afforded a 2.64-fold improvement in total percent conversion over UiO-66-NH2. The exceptional thermal and storage stability of the MIP-202/F-ISE sensor paves the way toward remote/wearable field detection of G-type NAs in real-world environments. Overall, the green, sustainable, highly scalable, and biocompatible nature of MIP-202(Zr) suggests the unexploited scope of such MOF catalysts for on-body sensing applications toward rapid on-site detection and detoxification of NA threats.

Metal Complexes as Antiviral Agents for SARS-CoV-2.

The severe acute respiratory syndrome - coronavirus 2 (SARS-CoV-2), the infectious agent responsible for COVID-19 - has caused more than 2.5 million deaths worldwide and triggered a global pandemic. Even with successful vaccines being delivered, there is an urgent need for novel treatments to combat SARS-CoV-2, and other emerging viral diseases. While several organic small molecule drug candidates are in development, some effort has also been devoted towards the application of metal complexes as potential antiviral agents against SARS-CoV-2. Herein, the metal complexes that have been reported to show antiviral activity against SARS-CoV-2 or one of its target proteins are described and their proposed mechanisms of action are discussed.

Evaluating Metal-Ligand Interactions of Metal-Binding Isosteres Using Model Complexes.

Bioisosteres are a useful approach to address pharmacokinetic liabilities and improve drug-like properties. Specific to developing metalloenzyme inhibitors, metal-binding pharmacophores (MBPs) have been combined with bioisosteres, to produce metal-binding isosteres (MBIs) as alternative scaffolds for use in fragment-based drug discovery (FBDD). Picolinic acid MBIs have been reported and evaluated for their metal-binding ability, pharmacokinetic properties, and enzyme inhibitory activity. However, their structural, electronic, and spectroscopic properties with metal ions other than Zn(II) have not been reported, which might reveal similarities and differences between MBIs and the parent MBPs. To this end, [M(TPA)(MBI)]+ (M = Ni(II) and Co(II), TPA = tris(2-pyridylmethyl)amine) is presented as a bioinorganic model system for investigating picolinic acid, four heterocyclic MBIs, and 2,2'-bipyridine. These complexes were characterized by X-ray crystallography as well as NMR, IR, and UV-vis spectroscopies, and their magnetic moments were accessed. In addition, [(TpPh,Me)Co(MBI)] (TpPh,Me = hydrotris(3,5-phenylmethylpyrazolyl)borate) was used as a second model compound, and the limitations and attributes of the two model systems are discussed. These results demonstrate that bioinorganic model complexes are versatile tools for metalloenzyme inhibitor design and can provide insights into the broader use of MBIs.