RESUMEN
Cell motility relies on the continuous reorganization of a dynamic actin-myosin-adhesion network at the leading edge of the cell, in order to generate protrusion at the leading edge and traction between the cell and its external environment. We analyze experimentally measured spatial distributions of actin flow, traction force, myosin density, and adhesion density in control and pharmacologically perturbed epithelial cells in order to develop a mechanical model of the actin-adhesion-myosin self-organization at the leading edge. A model in which the F-actin network is treated as a viscous gel, and adhesion clutch engagement is strengthened by myosin but weakened by actin flow, can explain the measured molecular distributions and correctly predict the spatial distributions of the actin flow and traction stress. We test the model by comparing its predictions with measurements of the actin flow and traction stress in cells with fast and slow actin polymerization rates. The model predicts how the location of the lamellipodium-lamellum boundary depends on the actin viscosity and adhesion strength. The model further predicts that the location of the lamellipodium-lamellum boundary is not very sensitive to the level of myosin contraction.
Asunto(s)
Citoesqueleto de Actina/química , Actinas/química , Células Epiteliales/fisiología , Modelos Biológicos , Miosinas/química , Adhesión Celular , Movimiento CelularRESUMEN
Axonal outgrowth, cell crawling, and cytokinesis utilize actomyosin, microtubule-based motors, cytoskeletal dynamics, and substrate adhesions to produce traction forces and bulk cellular motion. While it has long been appreciated that growth cones resemble crawling cells and that the mechanisms that drive cytokinesis help power cell crawling, they are typically viewed as unique processes. To better understand the relationship between these modes of motility, here, we developed a unified active fluid model of cytokinesis, amoeboid migration, mesenchymal migration, neuronal migration, and axonal outgrowth in terms of cytoskeletal flow, adhesions, viscosity, and force generation. Using numerical modeling, we fit subcellular velocity profiles of the motions of cytoskeletal structures and docked organelles from previously published studies to infer underlying patterns of force generation and adhesion. Our results indicate that, during cytokinesis, there is a primary converge zone at the cleavage furrow that drives flow towards it; adhesions are symmetric across the cell, and as a result, cells are stationary. In mesenchymal, amoeboid, and neuronal migration, the site of the converge zone shifts, and differences in adhesion between the front and back of the cell drive crawling. During neuronal migration and axonal outgrowth, the primary convergence zone lies within the growth cone, which drives actin retrograde flow in the P-domain and bulk anterograde flow of the axonal shaft. They differ in that during neuronal migration, the cell body is weakly attached to the substrate and thus moves forward at the same velocity as the axon. In contrast, during axonal outgrowth, the cell body strongly adheres to the substrate and remains stationary, resulting in a decrease in flow velocity away from the growth cone. The simplicity with which cytokinesis, cell crawling, and axonal outgrowth can be modeled by varying coefficients in a simple model suggests a deep connection between them.
RESUMEN
Recent genome-wide association studies (GWAS) have uncovered the genetic basis of complex traits, but show an under-representation of non-European descent individuals, underscoring a critical gap in genetic research. Here, we assess whether we can improve disease prediction across diverse ancestries using multiomic data. We evaluate the performance of Group-LASSO INTERaction-NET (glinternet) and pretrained lasso in disease prediction focusing on diverse ancestries in the UK Biobank. Models were trained on data from White British and other ancestries and validated across a cohort of over 96,000 individuals for 8 diseases. Out of 96 models trained, we report 16 with statistically significant incremental predictive performance in terms of ROC-AUC scores (p-value < 0.05), found for diabetes, arthritis, gall stones, cystitis, asthma and osteoarthritis. For the interaction and pretrained models that outperformed the baseline, the PRS score was the primary driver behind prediction. Our findings indicate that both interaction terms and pre-training can enhance prediction accuracy but for a limited set of diseases and moderate improvements in accuracy.
RESUMEN
Single-cell datasets often lack individual cell labels, making it challenging to identify cells associated with disease. To address this, we introduce Mixture Modeling for Multiple Instance Learning (MMIL), an expectation maximization method that enables the training and calibration of cell-level classifiers using patient-level labels. Our approach can be used to train e.g. lasso logistic regression models, gradient boosted trees, and neural networks. When applied to clinically-annotated, primary patient samples in Acute Myeloid Leukemia (AML) and Acute Lymphoblastic Leukemia (ALL), our method accurately identifies cancer cells, generalizes across tissues and treatment timepoints, and selects biologically relevant features. In addition, MMIL is capable of incorporating cell labels into model training when they are known, providing a powerful framework for leveraging both labeled and unlabeled data simultaneously. Mixture Modeling for MIL offers a novel approach for cell classification, with significant potential to advance disease understanding and management, especially in scenarios with unknown gold-standard labels and high dimensionality.
RESUMEN
Clinical diagnosis typically incorporates physical examination, patient history, and various laboratory tests and imaging studies, but makes limited use of the human system's own record of antigen exposures encoded by receptors on B cells and T cells. We analyzed immune receptor datasets from 593 individuals to develop MAchine Learning for Immunological Diagnosis (Mal-ID) , an interpretive framework to screen for multiple illnesses simultaneously or precisely test for one condition. This approach detects specific infections, autoimmune disorders, vaccine responses, and disease severity differences. Human-interpretable features of the model recapitulate known immune responses to SARS-CoV-2, Influenza, and HIV, highlight antigen-specific receptors, and reveal distinct characteristics of Systemic Lupus Erythematosus and Type-1 Diabetes autoreactivity. This analysis framework has broad potential for scientific and clinical interpretation of human immune responses.
RESUMEN
ABSTRACT: Chimeric antigen receptor (CAR) T cells directed against CD19 (CAR19) are a revolutionary treatment for B-cell lymphomas (BCLs). CAR19 cell expansion is necessary for CAR19 function but is also associated with toxicity. To define the impact of CAR19 expansion on patient outcomes, we prospectively followed a cohort of 236 patients treated with CAR19 (brexucabtagene autoleucel or axicabtagene ciloleucel) for mantle cell lymphoma (MCL), follicular lymphoma, and large BCL (LBCL) over the course of 5 years and obtained CAR19 expansion data using peripheral blood immunophenotyping for 188 of these patients. CAR19 expansion was higher in patients with MCL than other lymphoma histologic subtypes. Notably, patients with MCL had increased toxicity and required fourfold higher cumulative steroid doses than patients with LBCL. CAR19 expansion was associated with the development of cytokine release syndrome, immune effector cell-associated neurotoxicity syndrome, and the requirement for granulocyte colony-stimulating factor 14 days after infusion. Younger patients and those with elevated lactate dehydrogenase (LDH) had significantly higher CAR19 expansion. In general, no association between CAR19 expansion and LBCL treatment response was observed. However, when controlling for tumor burden, we found that lower CAR19 expansion in conjunction with low LDH was associated with improved outcomes in LBCL. In sum, this study finds CAR19 expansion principally associates with CAR-related toxicity. Additionally, CAR19 expansion as measured by peripheral blood immunophenotyping may be dispensable to favorable outcomes in LBCL.
Asunto(s)
Antígenos CD19 , Inmunofenotipificación , Inmunoterapia Adoptiva , Humanos , Masculino , Antígenos CD19/inmunología , Persona de Mediana Edad , Inmunoterapia Adoptiva/efectos adversos , Inmunoterapia Adoptiva/métodos , Femenino , Anciano , Receptores Quiméricos de Antígenos/inmunología , Adulto , Linfoma de Células del Manto/inmunología , Linfoma de Células del Manto/sangre , Anciano de 80 o más Años , Productos BiológicosRESUMEN
Microtubule disruption is a common downstream mechanism leading to axonal degeneration in a number of neurological diseases. To date, most studies on this topic have focused on the loss of microtubule mass from the axon, as well as changes in the stability properties of the microtubules and/or their tubulin composition. Here we posit corruption of the normal pattern of microtubule polarity orientation as an underappreciated and yet treatable contributor to axonal degeneration. We include computational modeling to fortify the rigor of our considerations. Our simulations demonstrate that even a small deviation from the usual polarity pattern of axonal microtubules is detrimental to motor-based trafficking of organelles and other intracellular cargo. Additional modeling predicts that axons with such deviations will exhibit significantly reduced speed and reliability of organelle transport, and that localized clusters of wrongly oriented microtubules will result in traffic jams of accumulated organelles.
Asunto(s)
Axones , Microtúbulos , Reproducibilidad de los ResultadosRESUMEN
A growth cone is a motile structure at the tips of axons that is driven by the actin network and guides axon extension. Low actin adhesion to the substrate creates a stationary actin treadmill that allows leading-edge protrusion when adhesion increases in response to guidance cues. We use experimental measurements in the Aplysia bag growth cone to develop and constrain a simple mechanical model of the actin treadmill. We show that actin retrograde flow is primarily generated by myosin contractile forces, but when myosin is inhibited, leading-edge membrane tension increases and drives the flow. By comparing predictions of the model with previous experimental measurements, we demonstrate that lamellipodial and filopodial filament breaking contribute equally to the resistance to the flow. The fully constrained model clarifies the role of actin turnover in the mechanical balance driving the actin treadmill and reproduces the recent experimental observation that inhibition of actin depolymerization causes retrograde flow to slow exponentially with time. We estimate forces in the actin treadmill, and we demonstrate that measured G-actin distributions are consistent with the existence of a forward-directed fluid flow that transports G-actin to the leading edge.
Asunto(s)
Actinas/metabolismo , Membrana Celular/metabolismo , Conos de Crecimiento/metabolismo , Fenómenos Mecánicos , Modelos Biológicos , Miosinas/metabolismo , Actinas/química , Fenómenos Biomecánicos , Cinética , Multimerización de Proteína , Estructura Cuaternaria de Proteína , Seudópodos/metabolismoRESUMEN
The 'simple' view of the mitotic spindle is that it self-assembles as a result of microtubules (MTs) randomly searching for chromosomes, after which the spindle length is maintained by a balance of outward tension exerted by molecular motors on the MTs connecting centrosomes and chromosomes, and compression generated by other motors on the MTs connecting the spindle poles. This picture is being challenged now by mounting evidence indicating that spindle assembly and maintenance rely on much more complex interconnected networks of microtubules, molecular motors, chromosomes and regulatory proteins. From an engineering point of view, three design principles of this molecular machine are especially important: the spindle assembles quickly, it assembles accurately, and it is mechanically robust--yet malleable. How is this design achieved with randomly interacting and impermanent molecular parts? Here, we review recent interdisciplinary studies that have started to shed light on this question. We discuss cooperative mechanisms of spindle self-assembly, error correction and maintenance of its mechanical properties, speculate on analogy between spindle and lamellipodial dynamics, and highlight the role of quantitative approaches in understanding the mitotic spindle design.
Asunto(s)
Huso Acromático/metabolismo , Animales , Fenómenos Biomecánicos , Citoesqueleto/metabolismo , Humanos , Microtúbulos/metabolismo , Mitosis/fisiología , Modelos BiológicosRESUMEN
A rigorous numerical test of a hypothetical mechanism of a molecular motor should model explicitly the diffusive motion of the motor's degrees of freedom as well as the transition rates between the motor's chemical states. We present such a Brownian dynamics, mechanochemcial model of the coarse-grain structure of the dimeric, linear motor myosin V. Compared with run-length data, our model provides strong support for a proposed strain-controlled gating mechanism that enhances processivity. We demonstrate that the diffusion rate of a detached motor head during motor stepping is self-consistent with known kinetic rate constants and can explain the motor's key performance features, such as speed and stall force. We present illustrative and realistic animations of motor stepping in the presence of thermal noise. The quantitative success and illustrative power of this type of model suggest that it will be useful in testing our understanding of a range of biological and synthetic motors.
Asunto(s)
Miosina Tipo V/química , Difusión , Cinética , Modelos Biológicos , Miosina Tipo V/metabolismo , Multimerización de Proteína , Estrés MecánicoRESUMEN
In the developing nervous system, axons are guided to their synaptic targets by motile structures at the axon tip called growth cones, which reorganize their cytoskeleton in order to steer in response to chemotactic cues. Growth cone motility is mediated by an actin-adhesion "clutch" mechanism, in which mechanical attachment to a substrate, coupled with polarized actin growth, produces leading-edge protrusion. Several studies suggest that dynamic microtubules (MTs) in the growth cone periphery play an essential role in growth cone steering. It is not yet well-understood how the MT cytoskeleton and the dynamic actin-adhesion clutch system are coordinated to promote growth cone navigation. I introduce an experimentally motivated stochastic model of the dynamic reorganization of the growth cone cytoskeleton in response to external guidance cues. According to this model, asymmetric decoupling of MTs from actin retrograde flow leads to a local influx of MTs to the growth cone leading edge, and the leading-edge MT accumulation is amplified by positive feedback between MTs and the actin-adhesion clutch system. Local accumulation of MTs at the leading edge is hypothesized to increase actin adhesion to the substrate, which attenuates actin retrograde flow and promotes leading-edge protrusion. Growth cone alignment with the chemotactic gradient is predicted to be most effective for intermediate levels of sensitivity of the adhesion strength to the presence of leading-edge MTs. Quantitative predictions of the MT distribution and the local rate of retrograde actin flow will allow the hypothetical positive feedback mechanism to be experimentally tested.
RESUMEN
CONTEXT: The heat-tolerance test (HTT) is a screening tool for secondary prevention of exertional heat illness by the Israel Defense Forces. To discern participant tolerance, recruits are exposed to intermediate environmental and exercise stresses, and their physiological responses, core temperature, and heart rate are monitored. When their physiological measures rise at a higher rate or exceed the upper levels of absolute values compared with other participants, heat intolerance (HI) is diagnosed. OBJECTIVE: To develop a mathematical model to interpret HTT results and provide a quantitative estimate of the probability of heat tolerance (PHT). DESIGN: Cross-sectional study. SETTING: Warrior Health Research Institute. PATIENTS OR OTHER PARTICIPANTS: The HTT results of 175 random individuals tested after an episode of exertional heat illness were classified qualitatively and then divided into training (n = 112) and testing (n = 63) datasets. All individuals were male soldiers (age range = 18-22 years) who had sustained an episode of definitive or suspected exertional heat stroke. MAIN OUTCOME MEASURE(S): Based on the decision algorithm used by the Israel Defense Forces for manual interpretation of the HTT, we designed a logistic regression model to predict the heat-tolerance state. The model used a time series of physiological measures (core temperature and heart rate) of individuals to predict the manually assigned diagnosis of HT or HI. It was initially fitted and then tested on 2 separate, random datasets. The model produced a single value, the PHT, and its predictive ability was demonstrated by prediction-density plots, receiver operating characteristic curve, contingency tables, and conventional screening test evaluation measures. RESULTS: According to prediction-density plots of the testing set, all HT patients had a PHT of 0.7 to 1. The receiver operating characteristic curve plot showed that PHT was an excellent predictor of the manual HT interpretations (area under the curve = 0.973). Using a cutoff probability of 0.5 for the diagnosis of HI, we found that PHT had sensitivity, specificity, and accuracy of 100%, 90%, and 92.06%, respectively. CONCLUSIONS: The PHT has the potential to be substituted for manual interpretation of the HTT and to serve in a variety of clinical and research applications.
Asunto(s)
Trastornos de Estrés por Calor/prevención & control , Juicio/fisiología , Adolescente , Competencia Clínica/normas , Estudios Transversales , Ejercicio Físico/fisiología , Prueba de Esfuerzo/métodos , Frecuencia Cardíaca/fisiología , Calor , Humanos , Israel , Masculino , Personal Militar , Modelos Biológicos , Reinserción al Trabajo , Especialización/normas , Adulto JovenRESUMEN
We present a computational model to test a "polarity sorting" mechanism for microtubule (MT) organization in developing axons. We simulate the motor-based axonal transport of short MTs to test the hypothesis that immobilized cytoplasmic dynein motors transport short MTs with their plus ends leading, so "mal-oriented" MTs with minus-end-out are transported toward the cell body while "correctly" oriented MTs are transported in the anterograde direction away from the soma. We find that dynein-based transport of short MTs can explain the predominately plus-end-out polarity pattern of axonal MTs but that transient attachments of plus-end-directed motor proteins and nonmotile cross-linker proteins are needed to explain the frequent pauses and occasional reversals observed in live-cell imaging of MT transport. Static cross-linkers increase the likelihood of a stalled "tug-of-war" between retrograde and anterograde forces on the MT, providing an explanation for the frequent pauses of short MTs and the immobility of longer MTs. We predict that inhibition of the proposed static cross-linker will produce disordered transport of short MTs and increased mobility of longer MTs. We also predict that acute inhibition of cytoplasmic dynein will disrupt the polarity sorting of MTs by increasing the likelihood of "incorrect" sorting of MTs by plus-end-directed motors.
Asunto(s)
Polaridad Celular/fisiología , Microtúbulos/metabolismo , Transporte Axonal/fisiología , Axones/metabolismo , Axones/fisiología , Movimiento Celular , Células Cultivadas , Simulación por Computador/estadística & datos numéricos , Dineínas Citoplasmáticas/metabolismo , Dineínas/metabolismo , Cinesinas/metabolismo , Microtúbulos/fisiología , Neuronas/metabolismo , Transporte de Proteínas/fisiologíaRESUMEN
Axonal microtubules are predominantly organized into a plus-end-out pattern. Here, we tested both experimentally and with computational modeling whether a motor-based polarity-sorting mechanism can explain this microtubule pattern. The posited mechanism centers on cytoplasmic dynein transporting plus-end-out and minus-end-out microtubules into and out of the axon, respectively. When cytoplasmic dynein was acutely inhibited, the bi-directional transport of microtubules in the axon was disrupted in both directions, after which minus-end-out microtubules accumulated in the axon over time. Computational modeling revealed that dynein-mediated transport of microtubules can establish and preserve a predominantly plus-end-out microtubule pattern as per the details of the experimental findings, but only if a kinesin motor and a static cross-linker protein are also at play. Consistent with the predictions of the model, partial depletion of TRIM46, a protein that cross-links axonal microtubules in a manner that influences their polarity orientation, leads to an increase in microtubule transport.
Asunto(s)
Dineínas Citoplasmáticas/metabolismo , Dineínas/metabolismo , Microtúbulos/metabolismo , Animales , Transporte Biológico , Movimiento Celular , RatasRESUMEN
We consider the transport of rigid objects with internal structure in a flashing ratchet potential by investigating the overdamped behavior of a rodlike chain of evenly spaced point particles. In one dimension, analytical arguments show that the velocity can reverse direction multiple times in response to changing the size of the chain or the temperature of the heat bath. The physical reason is that the effective potential experienced by the mechanically coupled objects can have a different symmetry than that of individual objects. All analytical predictions are confirmed by Brownian dynamics simulations. These results may provide a route to simple, coarse-grained models of molecular motor transport that incorporate an object's size and rotational degrees of freedom into the mechanism of transport.
RESUMEN
Numerical simulation is used to study a single polymer chain in a flashing ratchet potential to determine how the mechanism of this Brownian motor system is affected by the presence of internal degrees of freedom. The polymer is modeled by a freely jointed chain with N monomers in which the monomers interact via a repulsive Lennard-Jones potential and neighboring monomers on the chain are connected by finite extensible nonlinear elastic bonds. Each monomer is acted upon by a 1D asymmetric, piecewise linear potential of spatial period L comparable to the radius of gyration of the polymer. This potential is also characterized by a localization time, t(on), and by a free diffusion time, t(off). We characterize the average motor velocity as a function of L, t(off), and N to determine optimal parameter ranges, and we evaluate motor performance in terms of finite dispersion, Peclet number, rectification efficiency, stall force, and transportation of a load against a viscous drag. We find that the polymer motor performs qualitatively better than a single particle in a flashing ratchet: with increasing N, the polymer loses velocity much more slowly than expected in the absence of internal degrees of freedom, and the motor stall force increases linearly with N. To understand these cooperative aspects of motor operation, we analyze relevant Rouse modes. The experimental feasibility is analyzed and the parameters of the model are scaled to those of lambda-DNA. Finally, in the context of experimental realization, we present initial modeling results for a 2D flashing ratchet constructed using an electrode array, and find good agreement with the results of 1D simulations although the polymer in the 2D potential sometimes briefly "detaches" from the electrode surface.
RESUMEN
Investigations into molecular motor dynamics are increasingly focused on small-scale features of the motor's motion. We define performance measures of a common type of single-molecule motility assay, the bead assay, for its ability to detect such features. Using numerical models, we explore the dependence of assay performance on a number of experimentally controllable parameters, including bead size, optical force, and the method of attaching the bead to the motor. We find that the best parameter choice depends on the objective of the experiments, and give a guide to parameter selection. Comparison of the models against experimental data from a recent bead assay of myosin V exemplifies how our methods can also be used to extract additional information from bead assays, particularly that related to small-scale features. By analyzing the experimental data we find evidence for previously undetected multiple waiting states of the bead-motor complex. Furthermore, from numerical simulations we find that equilibrium bead dynamics display features previously attributed to aborted motor steps, and that bead dynamics alone can produce multiple subphases during a step.
Asunto(s)
Microesferas , Miosina Tipo V/metabolismo , Pinzas Ópticas , Movimiento (Física) , Factores de TiempoRESUMEN
A flashing ratchet transports diffusive particles using a time-dependent, asymmetric potential. The particle speed is predicted to increase when a feedback algorithm based on the particle position is used. We have experimentally realized such a feedback ratchet using an optical line trap, and observed that use of feedback increases velocity by up to an order of magnitude. We compare two different feedback algorithms for small particle numbers, and find good agreement with simulations. We also find that existing algorithms can be improved to be more tolerant to feedback delay times.