Enantiomeric analysis of drugs in water samples by using liquid-liquid microextraction and nano-liquid chromatography.

The nano-LC technique is increasingly used for both fast studies on enantiomeric analysis and test beds of novel stationary phases due to the small volumes involved and the short conditioning and analysis times. In this study, the enantioseparation of 10 drugs from different families was carried out by nano-LC, utilizing silica with immobilized amylose tris(3-chloro-5-methylphenylcarbamate) column. The effect on chiral separation caused by the addition of different salts to the mobile phase was evaluated. To simultaneously separate as many enantiomers as possible, the effect of buffer concentration in the mobile phase was studied, and, to increase the sensitivity, a liquid-liquid microextraction based on the use of isoamyl acetate as sustainable extraction solvent was applied to pre-concentrate four chiral drugs from tap and environmental waters, achieving satisfactory recoveries (>70%).

Potentiality of miniaturized techniques for the analysis of drugs of abuse.

Capillary electromigration (CE) and liquid chromatographic techniques (CLC/nano-LC) are miniaturized techniques offering distinct advantages over conventional ones in the field of separation science. Among these, high efficiency, high chromatographic resolution, and use of minute volumes of both mobile phase and sample volumes are the most important. CE and CLC/nano-LC have been applied to the analysis of many compounds including peptides, proteins, drugs, enantiomers, ions, etc. Over the years, the methods described here have also been used for the analysis of compounds of clinical, forensic, and toxicological interest. In this review article, the main features of the mentioned techniques are summarized. Their potentiality for the analysis of drugs of abuse are discussed. Some selected applications in this field in the period of 2015-present are also reported.

Chiral Nano-Liquid Chromatography and Dispersive Liquid-Liquid Microextraction Applied to the Analysis of Antifungal Drugs in Milk.

A novel chromatographic application in chiral separation by using the nano-LC technique is here reported. The chiral recognition of 12 antifungal drugs was obtained through a 75 µm I.D. fused-silica capillary, which was packed with a CSP-cellulose 3,5-dichlorophenylcarbamate (CDCPC), by means of a lab-made slurry packing procedure. The mobile phase composition and the experimental conditions were optimized in order to find the optimum chiral separation for some selected racemic mixtures of imidazole and triazole derivatives. Some important parameters, such as retention faction, enantioresolution, peak efficiency, and peak shape, were investigated as a function of the mobile phase (pH, water content, type and concentration of both the buffer and the organic modifier, and solvent dilution composition). Within one run lasting 25 min, at a flow rate of approximately 400 nL min-1, eight couples of enantiomers were baseline-resolved and four of them were separated in less than 25 min. The method was then applied to milk samples, which were pretreated using a classical dispersive liquid-liquid microextraction technique preceded by protein precipitation. Finally, the DLLME-nano-LC-UV method was validated in a matrix following the main FDA guidelines for bioanalytical methods.

Application of a Low Transition Temperature Mixture for the Dispersive Liquid-Liquid Microextraction of Illicit Drugs from Urine Samples.

The use of psychoactive substances is a serious problem in today's society and reliable methods of analysis are necessary to confirm their occurrence in biological matrices. In this work, a green sample preparation technique prior to HPLC-MS analysis was successfully applied to the extraction of 14 illicit drugs from urine samples. The isolation procedure was a dispersive liquid-liquid microextraction based on the use of a low transition temperature mixture (LTTM), composed of choline chloride and sesamol in a molar ratio 1:3 as the extracting solvent. This mixture was classified as LTTM after a thorough investigation carried out by FTIR and DSC, which recorded a glass transition temperature at -71 °C. The extraction procedure was optimized and validated according to the main Food and Drug Administration (FDA) guidelines for bioanalytical methods, obtaining good figures of merit for all parameters: the estimated lower limit of quantitation (LLOQ) values were between 0.01 µg L-1 (bk-MMBDB) and 0.37 µg L-1 (PMA); recoveries, evaluated at very low spike levels (in the ng-µg L-1 range), spanned from 55% (MBDB) to 100% (bk-MMBDB and MDPV); finally, both within-run and between-run precisions were lower than 20% (LLOQ) and 15% (10xLLOQ).

Nano-liquid chromatography combined with a sustainable microextraction based on natural deep eutectic solvents for analysis of phthalate esters.

The separation of 11 phthalic acid ester (PAEs) was carried out by nano-liquid chromatography coupled to ultraviolet and MS detection. Preliminary experiments were achieved in order to select suitable stationary phases and chromatographic conditions. The baseline separation was obtained, for all compounds, with an XBridgeTM C18 column in less than 15 min, working in step gradient mode. The sensitivity of the method was improved by on-column focusing. PAEs were extracted from alcoholic and nonalcoholic beverages using vortex-assisted emulsification dispersive liquid-liquid microextration and natural deep eutectic solvents. The whole method was validated in terms of linearity, sensitivity, precision, recovery, and repeatability. Combination of both off-line sample preparation preconcentration and large injection volume led to obtain LOQs in the range 5-47 ng/mL. The developed nano-LC-UV method was extended to MS detection to confirm the presence of PAEs in some beverages commercialized in different types of packaging.

Enantioseparation of tryptophan and its unnatural derivatives by nano-LC on CSP-teicoplanin silica based.

This work deals with the potentiality of nano liquid chromatography (Nano-LC) for the chiral separation of racemic mixture of tryptophan and some selected derivatives by using 100 µm i.d. fused silica capillary packed with teicoplanin bonded to 5 µm diol silica stationary phase. The experiments were carried out by using a cheap and laboratory-assembled nano-LC-UV system. Elution was done in an isocratic mode using a polar organic mobile phase. In order to find the optimum chiral separation of the studied enantiomers, some chromatographic experimental parameters were systematically studied and optimized. Among them, mobile phase composition, namely organic modifier type and concentration, buffer type and pH and aqueous content and sample solvent dilution on retention time, retention factor and enantioresolution factor were studied. Baseline enantioresolution and good peak shape was achieved utilizing the mobile phase containing 40 mM ammonium formate at pH pH 2.5 in ACN/water/acetone (60:30:10, v/v/v) at 520 nL/min in less than 8 min analysis time.

Enantiomers separation by capillary electrochromatography using polysaccharide-based stationary phases.

The separation of chiral compounds is an interesting and important topic of research because these compounds are involved in some biological processes, fundamentally in human health. Among the various application fields where enantiomers are remarkable, drug analysis has to be considered. Most of the drugs contain enantiomers and very often one of the two isomers could be pharmacologically more active or even dangerous. Therefore, the separation of these compounds is very important. Among the different analytical techniques usually employed, capillary electrochromatography has demonstrated great capability in enantiomers resolution. The great potential of this electromigration technique stands mainly in its high efficiency due to the use of an electrosmotic flow (flat flow profile) and on the high selectivity because of the use of a stationary phase. Chiral separation can be obtained utilizing several chiral stationary phases including a polysaccharide derivative. The aim of this review paper is to summarize the main features of capillary electrochromatography and polysaccharide derivatives of chiral stationary phase. It also report examples of practical applications utilizing this approach.

Analysis of Enantiomers in Products of Food Interest.

The separation of enantiomers has been started in the past and continues to be a topic of great interest in various fields of research, mainly because these compounds could be involved in biological processes such as, for example, those related to human health. Great attention has been devoted to studies for the analysis of enantiomers present in food products in order to assess authenticity and safety. The separation of these compounds can be carried out utilizing analytical techniques such as gas chromatography, high-performance liquid chromatography, supercritical fluid chromatography, and other methods. The separation is performed mainly employing chromatographic columns containing particles modified with chiral selectors (CS). Among the CS used, modified polysaccharides, glycopeptide antibiotics, and cyclodextrins are currently applied.

An attempt for fast separation of enantiomers in nano-liquid chromatography and capillary electrochromatography.

In the present study, an attempt was made to achieve separation of enantiomers within a minute in nano-LC and CEC. In order to achieve this goal several parameters were optimized from the viewpoint of the property of chiral analytes, concentration of the chiral selector in the packing material, capillary dimensions, and separation mode. The enantiomers of several of the applied chiral sulfoxides could be resolved with the analysis time <1 min. Some instrumental obstacles hindering further reduction of analysis time are also highlighted.

Capillary electrochromatography and nano-liquid chromatography coupled to nano-electrospray ionization interface for the separation and identification of estrogenic compounds.

Nano-LC and CEC were coupled to MS through a nanospray or a pressurized liquid-junction interface for the simultaneous separation and determination of 11 estrogenic compounds. Different stationary phases, that is, phenyl, C18, and C18 bidentate silica hydrate, were studied. For both techniques, the phenyl stationary phase was the best option, considering separation efficiency, selectivity, and resolution. Under the optimized conditions, the baseline separation of the target compounds (including estradiol and zearalanol epimers) was achieved in less than 20 min in nano-LC-MS and less than 13 min in CEC-MS. Molecular imprinted polymer SPE was used for extracting the target compounds from mineral water samples with the analysis of nano-LC-MS. The whole molecular imprinted polymer SPE nano-LC-MS method was validated through a recovery study at two levels of concentration. Sensitivity was improved by on-column focusing technique obtaining LODs in the range 1.4-55.4 ng/L.

Determination of estrogenic compounds in milk and yogurt samples by hollow-fibre liquid-phase microextraction-gas chromatography-triple quadrupole mass spectrometry.

An environmentally friendly method based on hollow-fibre liquid-phase microextraction (HF-LPME) was developed for the extraction of selected estrogenic compounds (i.e. four natural sexual hormones: estrone, 17ß-estradiol, 17α-estradiol and estriol; two exoestrogens: 17α-ethynylestradiol and 2-methoxyestradiol; two synthetic stilbenes: dienestrol and hexestrol; and five resorcylic acid lactones: zearalenone, α-zearalanol, ß-zearalanol, α-zearalenol and ß-zearalenol), from whole cow and semi-skimmed goat milk and whole natural yogurt. After the optimization of the sample preparation procedure, spiked extracts were derivatized to their trimethylsilyl products using N,O-bis(trimethylsilyl)trifluoroacetamide reagent and then analyzed by gas chromatography-tandem mass spectrometry (GC-MS/MS). Once optimum extraction conditions were established (protein precipitation with acetonitrile, extraction and the back-extraction in acetonitrile following the HF-LPME procedure), the method was validated and the calibration range, precision and accuracy were studied. The RSD values for the intra- and inter-day precision of the peak areas were in the range 0.65-9.69 and 1.00-11.47 %, respectively. The determination coefficients were higher than 0.991 for method calibration curves while LOD and LOQ values were between 0.06-2.55 and 0.16-6.11 µg/L for whole cow milk, 0.04-1.70 and 0.11-4.86 µg/L for semi-skimmed goat milk and 0.07-3.73 and 0.23-9.81 µg/L for natural yogurt, respectively. Finally, the accuracy and precision of the method were evaluated, obtaining a value in the range 84 81-119 % and RSD values lower than 20 % in all cases.

Determination of key flavonoid aglycones by means of nano-LC for the analysis of dietary supplements and food matrices.

A method for the analysis of flavonoids (myricetin, quercetin, naringenin, hesperitin, and kaempferol), with interesting bioactivity, has been developed and validated utilizing nano-LC technique. In order to find optimal conditions, capillary columns (75 µm id × 10 cm) packed with different types of stationary phases, Kinetex® C18 core-shell (2.6 µm particle size), Hydride-based RP-C18 (sub-2 µm particle size), and LiChrospher® 100 RP-18 endcapped (5 µm particle size) were evaluated. The method was validated using Hydride-based RP-C18 stationary phase, with sub-2 µm particle size. A good chromatographic performance, expressed in terms of repeatability (RSD, in the range 1.63-4.68% for peak area), column-to-column reproducibility (RSD not higher than 8.01% for peak area), good linearity and sensitivity was obtained. In particular limit of detection values between 0.07 and 0.31 µg/mL were achieved with on column focusing technique. The method was applied to the determination of studied flavonoids in dietary supplements as well as in food matrices. The amount of quercetin found in the first analyzed dietary supplement, was in agreement to the labeled content. In the other samples, where the content of flavonoids was not labeled, most of the studied flavonoids were determined in amounts somewhere comparable to those reported in literature.

Capillary electrochromatography-mass spectrometry for the determination of 5-nitroimidazole antibiotics in urine samples.

The separation of eight antibiotics belonging to 5-nitroimidazole family was carried out by means of CEC coupled with MS. Preliminary experiments were carried out with ultraviolet detection in order to select the proper stationary and mobile phase. Among the different stationary phases studied (namely Lichrospher C18, 5 µm particle size; Cogent(TM) Bidentate C18, 4.2 µm; Pinnacle II™ Phenyl, 3 µm; Pinnacle II™ Cyano, 3 µm), Cogent™ Bidentate C18 (4.2 µm) gave the best performance. For CEC-MS coupling, a laboratory assembled liquid-junction-nano-spray interface was used. In order to achieve a good sensitivity, special attention was paid to both optimization of the sheath liquid composition as well as selection of the injection mode. Under optimized CEC-ESI-MS conditions, the separation was accomplished within 22 min by using a column packed with a mixture of Bidentate C18:Lichrospher Silica-60 (5 µm) 3:1 w/w, an inlet pressure of 11 bar, a voltage of 15 kV, and a mobile phase composed by 45:10:45 v/v/v ACN/MeOH/water containing ammonium acetate (5 mM pH 5). A combined hydrodynamic and electrokinetic injection of 8 bar, 15 kV, and 96 s was adopted. The method was validated in terms of repeatability and intermediate precision of retention times and peak areas, linearity, and LODs and LOQs. RSDs values were <2.9% for retention times and <16.1% for peak areas in both intraday and interday experiments. LOQ values were between 0.09 and 0.42 µg/mL for all compounds. Finally, the method was applied to the determination of three most employed 5-nitroimidazole antibiotics (metronidazole, secnidazole, and ternidazole) in spiked urine samples, subjected to a SPE procedure. Recovery values in the 67-103% range were obtained. Furthermore, for the selected antibiotics, CEC-MS(2) spectra were obtained providing the unambiguous confirmation of these drugs in urine samples.

Evaluation of the combination of a dispersive liquid-liquid microextraction method with micellar electrokinetic chromatography coupled to mass spectrometry for the determination of estrogenic compounds in milk and yogurt.

In this work, the suitability of a methodology based on dispersive liquid-liquid microextraction (DLLME) has been evaluated for the extraction of four endoestrogens (estriol, 17α-estradiol, 17ß-estradiol, and estrone), an exoestrogen (17α-etynylestradiol), and a mycotoxin (zearalenone), together with some of their major metabolites (2-methoxyestradiol, α-zearalanol, ß-zearalanol, α-zearalenol, and ß-zearalenol) from different types of milk (whole and skimmed cow milk and semiskimmed goat milk) and whole natural yogurt. The methodology includes a previous protein precipitation with acidified ACN and a defatting step with n-hexane. Separation of the analytes, determination, and quantification were developed by MEKC coupled to ESI-MS using a BGE containing an aqueous solution of ammonium perfluorooctanoate as MS friendly surfactant. Calibration, precision, and accuracy studies of the described DLLME-MEKC-MS/MS method were evaluated obtaining a good linearity and LODs in the low micrograms per liter range.

Recovery of cellulose acetate bioplastic from cigarette butts: realization of a sustainable sorbent for water remediation.

Cigarette butts, one of the most common forms of litter in the world, represent a source of chemical and plastic pollution releasing thousands of toxic compounds and microfibers of cellulose acetate (CA). Besides the correct waste management, the recovery of CA from cigarette filters is a way to cushion their negative effects on the environment. Thus far, recycling strategies have been limited to industrial applications, while not many solutions have designed for water remediation. This work describes a strategy to valorize this harmful waste and to reverse its environmental impact, proposing a simple and effective procedure of reclamation of CA and its reuse to prepare a composite sorbent for the treatment of polluted water. The first step entails the washing of filters with hot water (T = 90 °C) and hot ethanol (T = 58-68 °C) to remove the impurities produced during cigarette burning, as verified by means of UV and attenuated total reflection-Fourier-transform infrared (ATR-FTIR) spectroscopy, thermal gravimetric analysis (TGA), and differential scanning calorimetry (DSC). The second step involves the use of the regenerated CA to prepare porous cylinder-shaped cryogels (15 mm × 10 mm) whose sorption properties are enhanced by the combination with AC (15 % w/w). The synthesis takes advantage of the sol-gel transition of the polymer dispersion (5 % w/V) in a solution acetone/water 5 mM in NH3 (60/40, v/v). After characterization by dynamic mechanical analysis (DMA), TGA, FT-IR, and scanning electron microscopy (SEM), the adsorption capability of the physical cryogel was studied in terms of treated environmental water volume, contact time and concentration of the selected pollutants. The results have shown that the proposed strategy is a low-cost way to recycle CA from cigarette butts and that the designed sorbent is a promising material for water treatment, allowing quick removal times and yields >79.6 %.

Seatbelt Anterior Cruciate Ligament Reconstruction: A Variant of Internal Brace in Anterior Cruciate Ligament Reconstruction With an Adjustable Loop.

In recent years, there has been a growing interest in primary anterior cruciate ligament repair with the help of mechanical reinforcement techniques that employ synthetic grafting. The concept of ligament augmentation with reinforcement suture or internal bracing consists of stabilizing the repaired ligament and augmenting it with an ultra-high molecular weight polyethylene suture or tape, which guarantees greater resistance, safety during healing, and a more accelerated rehabilitation. In this work, we propose a variant of anterior cruciate ligament augmentation with suture, replacing the suture tape with an adjustable-loop reinforcement system, which is connected to the adjustable suspension devices for the graft in the femur and the tibia, surrounding the graft as a seatbelt.

Fast Arthroscopic Biceps Tenodesis Without Penetrating Grasper.

Long head of the biceps pathology is a common cause of shoulder pain and dysfunction. Surgical treatment can be either a tenotomy or a tenodesis. Long-term results may be similar in both surgical techniques; however, the latest systematic reviews indicate that tenodesis offers superior clinical and functional results in young patients and athletes. Considering the favorable results with the biceps tenodesis, we present this arthroscopic tenodesis in which the long head of the biceps is fixed in the bicipital groove with an all-suture anchor passed directly through the tendon, providing a stable and fast fixation without using penetrating grasper.

Nano-liquid chromatography and capillary electrochromatography hyphenated with mass spectrometry for tryptic digest protein analysis: a comparison.

Nano-LC and CEC were studied for the separation of cytochrome c tryptic digest. The peptides mixture was analyzed using either a nano-LC commercial or a laboratory assembled instrumentation coupled with an IT-ESI-MS by using a nanospray interface. CEC experiments were carried out with a CE apparatus coupled with the IT-ESI-MS through a liquid junction interface. Analytes were separated utilizing C18 silica based stationary phases, of different properties and origin, silica derivatized with cyano groups and C18 monolithic material. The last column, just because the chemical composition (absence of charged/chargeable groups) was tested only using nano-LC. Best results mainly related to the highest number of peptides separated and column equilibration time were obtained by nano-LC employing the C18 stationary phase (detection of 20 peptides, coverage of 88%). Similar results were achieved using both commercial and laboratory assembled instrumentation. The use of CEC revealed a higher separation efficiency and shorter analysis time. However, the number of separated peptides were lower than those observed in nano-LC. In CEC the use of capillaries packed with cyanosilica particles offered better results; however, less satisfactory than those observed in the miniaturized LC technique. Provided the use of the same stationary phase and taking into account the driving forces, the two techniques can be considered complementary, offering different information related to the retention times of the studied peptides.

Simultaneous analysis of cocaine and its metabolites in urine by capillary electrophoresis-electrospray mass spectrometry using a pressurized liquid junction nanoflow interface.

A new method for the simultaneous separation of cocaine and four metabolites in urine by CE-ESI-MS via a pressurized nanoliquid junction interface was developed. The resolution of cocaine, cocaethylene, benzoylecgonine, norcocaine, and ecgonine methyl ester was achieved in a polyvinyl-alcohol-coated capillary with 75 µm id × 50 cm total length, using a 15 mM ammonium formate electrolyte solution (pH 9.5) in less than 15 min. In addition, to enhance sensitivity, a field-amplified sample injection (FASI) was evaluated in terms of injection time and sample solvent composition. The limits of detection achieved with the FASI method ranged from 1.5 to 10 ng/mL for all the compounds. The detection of the studied compounds was performed using an ion-trap mass spectrometer in a positive ionization mode. A mixture of methanol:water (80:20 v/v) containing 0.1% v/v of formic acid was employed as spray liquid and delivered at ~200 nL/min. Under optimal CE-MS conditions, linearity was assessed in the concentration range of interest for all analytes with correlation coefficients r² ≥ 0.9913. Intra- and inter-day precision provided a relative standard deviation lower than 1.54% for migration times and lower than 12.15% for peak areas. Finally, urine samples, spiked with the standard mixture, were extracted using a solid-phase extraction procedure and injected under FASI conditions, providing recoveries from 80% to 94% for all analytes.

Enantioseparation of selected chiral agrochemicals by using nano-liquid chromatography and capillary electrochromatography with amylose tris(3­chloro-5-methylphenylcarbamate) covalently immobilized onto silica.

In this paper enantiomers of selected chiral agrochemicals representing various structural classes were separated by using nano-liquid chromatography (nano-LC) and capillary electrochromatography (CEC) employing a capillary column packed with silica particles containing immobilized amylose tris(3­chloro-5-methylphenylcarbamate) (i-ADMPC) as a chiral selector (CS). Special attention was paid to peak dispersion in nano-LC and CEC instruments used in order to make comparison between these two techniques more reliable. Enantioseparations were studied utilizing methanol (MeOH) or acetonitrile-water (ACNH2O), both containing 5 mM of ammonium acetate as the mobile phases (MPs). The tested chiral stationary phase (CSP), containing 20% (w/w) of the neutral CS onto native silica, allowed the generation of sufficiently strong electroosmotic flow (EOF) to observe separation of enantiomers of studied agrochemicals in a reasonable time also in CEC mode. Modestly higher efficiencies and enantioresolutions were obtained in CEC than in nano-LC. Just a moderate preference of CEC over nano-LC in this particular study can be explained with a significant mass transfer resistance through the CSP that is caused due to high content of the CS in CSP.